summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-01-18Merge tag 'drm-intel-fixes-2020-01-16' of ↵Dave Airlie4-11/+48
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - uAPI fix: Remove dash and colon from PMU names to comply with tools/perf - Fix for include file that was indirectly included - Two fixes to make sure VMA are marked active for error capture Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200116161419.GA13594@jlahtine-desk.ger.corp.intel.com
2020-01-18mtd: rawnand: gpmi: Restore nfc timing setup after suspend/resumeEsben Haabendal1-0/+4
As we reset the GPMI block at resume, the timing parameters setup by a previous exec_op is lost. Rewriting GPMI timing registers on first exec_op after resume fixes the problem. Fixes: ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op") Cc: stable@vger.kernel.org Signed-off-by: Esben Haabendal <esben@geanix.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-18mtd: rawnand: gpmi: Fix suspend/resume problemEsben Haabendal1-1/+6
On system resume, the gpmi clock must be enabled before accessing gpmi block. Without this, resume causes something like [ 661.348790] gpmi_reset_block(5cbb0f7e): module reset timeout [ 661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110 [ 661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110 [ 661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110 Fixes: ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op") Cc: stable@vger.kernel.org Signed-off-by: Esben Haabendal <esben@geanix.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-18mtd: spi-nor: Fix quad enable for Spansion like flashesMichael Walle1-0/+2
The commit 7b678c69c0ca ("mtd: spi-nor: Merge spansion Quad Enable methods") forgot to actually set the QE bit in some cases. Thus this breaks quad mode accesses to flashes which support readback of the status register-2. Fix it. Fixes: 7b678c69c0ca ("mtd: spi-nor: Merge spansion Quad Enable methods") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-18mtd: spi-nor: Fix selection of 4-byte addressing opcodes on SpansionVignesh Raghavendra1-3/+1
mtd->size is still unassigned when running spansion_post_sfdp_fixups() hook, therefore use nor->params.size to determine the size of flash device. This makes sure that 4-byte addressing opcodes are used on Spansion flashes that are larger than 16MiB and don't have SFDP 4BAIT table populated. Fixes: 92094ebc385e ("mtd: spi-nor: Add spansion_post_sfdp_fixups()") Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-18drm/mst: Don't do atomic checks over disabled managersJosé Roberto de Souza1-0/+3
When a main MST port is disconnected drivers should call drm_dp_mst_topology_mgr_set_mst() disabling the MST manager, this function will set manager mst_primary to NULL and it will cause the crash bellow on the next atomic check when trying to access mst_primary->port. As there is no use in running checks over managers that are not active this patch will skip it. [ 305.616450] [drm:drm_dp_mst_atomic_check] [MST PORT:00000000cc2049e9] releases all VCPI slots [ 305.625085] [drm:drm_dp_mst_atomic_check] [MST PORT:00000000020ab43e] releases all VCPI slots [ 305.633729] [drm:drm_dp_mst_atomic_check] [MST MGR:00000000cdd467d4] mst state 00000000b67672eb VCPI avail=63 used=0 [ 305.644405] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 305.651448] #PF: supervisor read access in kernel mode [ 305.656640] #PF: error_code(0x0000) - not-present page [ 305.661807] PGD 0 P4D 0 [ 305.664396] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 305.668789] CPU: 3 PID: 183 Comm: kworker/3:2 Not tainted 5.5.0-rc6+ #1404 [ 305.675703] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3201.A00.1905140358 05/14/2019 [ 305.689425] Workqueue: events drm_dp_delayed_destroy_work [ 305.694874] RIP: 0010:drm_dp_mst_atomic_check+0x138/0x2c0 [ 305.700306] Code: 00 00 00 41 29 d9 41 89 d8 4c 89 fa 4c 89 f1 48 c7 c6 b0 b1 34 82 bf 10 00 00 00 45 31 ed e8 3f 99 02 00 4d 8b bf 80 04 00 00 <49> 8b 47 30 49 8d 5f 30 4c 8d 60 e8 48 39 c3 74 35 49 8b 7c 24 28 [ 305.719169] RSP: 0018:ffffc90001687b58 EFLAGS: 00010246 [ 305.724434] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000 [ 305.731611] RDX: 0000000000000000 RSI: ffff88849fba8cb8 RDI: 00000000ffffffff [ 305.738785] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 305.745962] R10: ffffc900016879a0 R11: ffffc900016879a5 R12: 0000000000000000 [ 305.753139] R13: 0000000000000000 R14: ffff8884905c9bc0 R15: 0000000000000000 [ 305.760315] FS: 0000000000000000(0000) GS:ffff88849fb80000(0000) knlGS:0000000000000000 [ 305.768452] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 305.774263] CR2: 0000000000000030 CR3: 0000000005610006 CR4: 0000000000760ee0 [ 305.781441] PKRU: 55555554 [ 305.784228] Call Trace: [ 305.786739] intel_atomic_check+0xb2e/0x2560 [i915] [ 305.791678] ? printk+0x53/0x6a [ 305.794856] ? drm_atomic_check_only+0x3e/0x810 [ 305.799417] ? __drm_dbg+0x82/0x90 [ 305.802848] drm_atomic_check_only+0x56a/0x810 [ 305.807322] drm_atomic_commit+0xe/0x50 [ 305.811185] drm_client_modeset_commit_atomic+0x1e2/0x250 [ 305.816619] drm_client_modeset_commit_force+0x4d/0x180 [ 305.821921] drm_fb_helper_restore_fbdev_mode_unlocked+0x46/0xa0 [ 305.827963] drm_fb_helper_set_par+0x2b/0x40 [ 305.832265] drm_fb_helper_hotplug_event.part.0+0xb2/0xd0 [ 305.837755] drm_kms_helper_hotplug_event+0x21/0x30 [ 305.842694] process_one_work+0x25b/0x5b0 [ 305.846735] worker_thread+0x4b/0x3b0 [ 305.850439] kthread+0x100/0x140 [ 305.853690] ? process_one_work+0x5b0/0x5b0 [ 305.857901] ? kthread_park+0x80/0x80 [ 305.861588] ret_from_fork+0x24/0x50 [ 305.865202] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 btusb btrtl btbcm btintel bluetooth prime_numbers snd_hda_intel snd_intel_dspcfg snd_hda_codec e1000e snd_hwdep snd_hda_core thunderbolt mei_hdcp mei_me asix cdc_ether x86_pkg_temp_thermal r8152 mei coretemp usbnet snd_pcm mii crct10dif_pclmul ptp crc32_pclmul ecdh_generic ghash_clmulni_intel pps_core ecc i2c_i801 intel_lpss_pci [ 305.903096] CR2: 0000000000000030 [ 305.906431] ---[ end trace 70ee364eed801cb0 ]--- [ 305.940816] RIP: 0010:drm_dp_mst_atomic_check+0x138/0x2c0 [ 305.946261] Code: 00 00 00 41 29 d9 41 89 d8 4c 89 fa 4c 89 f1 48 c7 c6 b0 b1 34 82 bf 10 00 00 00 45 31 ed e8 3f 99 02 00 4d 8b bf 80 04 00 00 <49> 8b 47 30 49 8d 5f 30 4c 8d 60 e8 48 39 c3 74 35 49 8b 7c 24 28 [ 305.965125] RSP: 0018:ffffc90001687b58 EFLAGS: 00010246 [ 305.970382] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000 [ 305.977571] RDX: 0000000000000000 RSI: ffff88849fba8cb8 RDI: 00000000ffffffff [ 305.984747] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 305.991921] R10: ffffc900016879a0 R11: ffffc900016879a5 R12: 0000000000000000 [ 305.999099] R13: 0000000000000000 R14: ffff8884905c9bc0 R15: 0000000000000000 [ 306.006271] FS: 0000000000000000(0000) GS:ffff88849fb80000(0000) knlGS:0000000000000000 [ 306.014407] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 306.020185] CR2: 0000000000000030 CR3: 000000048b3aa003 CR4: 0000000000760ee0 [ 306.027404] PKRU: 55555554 [ 306.030127] BUG: sleeping function called from invalid context at include/linux/percpu-rwsem.h:38 [ 306.039049] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 183, name: kworker/3:2 [ 306.047272] INFO: lockdep is turned off. [ 306.051217] irq event stamp: 77505 [ 306.054647] hardirqs last enabled at (77505): [<ffffffff81a0c147>] _raw_spin_unlock_irqrestore+0x47/0x60 [ 306.064270] hardirqs last disabled at (77504): [<ffffffff81a0bedf>] _raw_spin_lock_irqsave+0xf/0x50 [ 306.073404] softirqs last enabled at (77402): [<ffffffff81e00389>] __do_softirq+0x389/0x47f [ 306.081885] softirqs last disabled at (77395): [<ffffffff810b83a9>] irq_exit+0xa9/0xc0 [ 306.089859] CPU: 3 PID: 183 Comm: kworker/3:2 Tainted: G D 5.5.0-rc6+ #1404 [ 306.098167] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3201.A00.1905140358 05/14/2019 [ 306.111882] Workqueue: events drm_dp_delayed_destroy_work [ 306.117314] Call Trace: [ 306.119780] dump_stack+0x71/0xa0 [ 306.123135] ___might_sleep.cold+0xf7/0x10b [ 306.127399] exit_signals+0x2b/0x360 [ 306.131014] do_exit+0xa7/0xc70 [ 306.134189] ? kthread+0x100/0x140 [ 306.137615] rewind_stack_do_exit+0x17/0x20 Fixes: cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Lyude Paul <lyude@redhat.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-18drm/amdgpu: add the lost mutex_init backPan, Xinhui1-0/+1
Initialize notifier_lock. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1016 Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: xinhui pan <xinhui.pan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-17Merge tag 'io_uring-5.5-2020-01-16' of git://git.kernel.dk/linux-blockLinus Torvalds2-28/+56
Pull io_uring fixes form Jens Axboe: - Ensure ->result is always set when IO is retried (Bijan) - In conjunction with the above, fix a regression in polled IO issue when retried (me/Bijan) - Don't setup async context for read/write fixed, otherwise we may wrongly map the iovec on retry (me) - Cancel io-wq work if we fail getting mm reference (me) - Ensure dependent work is always initialized correctly (me) - Only allow original task to submit IO, don't allow it from a passed ring fd (me) * tag 'io_uring-5.5-2020-01-16' of git://git.kernel.dk/linux-block: io_uring: only allow submit from owning task io_uring: ensure workqueue offload grabs ring mutex for poll list io_uring: clear req->result always before issuing a read/write request io_uring: be consistent in assigning next work from handler io-wq: cancel work if we fail getting a mm reference io_uring: don't setup async context for read/write fixed
2020-01-17Merge tag 'for-5.5-rc6-tag' of ↵Linus Torvalds6-46/+114
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes that have been in the works during last twp weeks. All have a user visible effect and are stable material: - scrub: properly update progress after calling cancel ioctl, calling 'resume' would start from the beginning otherwise - fix subvolume reference removal, after moving out of the original path the reference is not recognized and will lead to transaction abort - fix reloc root lifetime checks, could lead to crashes when there's subvolume cleaning running in parallel - fix memory leak when quotas get disabled in the middle of extent accounting - fix transaction abort in case of balance being started on degraded mount on eg. RAID1" * tag 'for-5.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: check rw_devices, not num_devices for balance Btrfs: always copy scrub arguments back to user space btrfs: relocation: fix reloc_root lifespan and access btrfs: fix memory leak in qgroup accounting btrfs: do not delete mismatched root refs btrfs: fix invalid removal of root ref btrfs: rework arguments of btrfs_unlink_subvol
2020-01-17drm/i915/userptr: fix size calculationMatthew Auld3-4/+7
If we create a rather large userptr object(e.g 1ULL << 32) we might shift past the type-width of num_pages: (int)num_pages << PAGE_SHIFT, resulting in a totally bogus sg_table, which fortunately will eventually manifest as: gen8_ppgtt_insert_huge:463 GEM_BUG_ON(iter->sg->length < page_size) kernel BUG at drivers/gpu/drm/i915/gt/gen8_ppgtt.c:463! v2: more unsigned long prefer I915_GTT_PAGE_SIZE Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200117132413.1170563-2-matthew.auld@intel.com
2020-01-17drm/i915/userptr: add user_size limit checkMatthew Auld1-0/+17
Don't allow a mismatch between obj->base.size/vma->size and the actual number of pages for the backing store, which is limited to INT_MAX pages. v2: document what are missing before we can safely drop the limit check Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200117132413.1170563-1-matthew.auld@intel.com
2020-01-17Merge tag 'usb-serial-5.5-rc7' of ↵Greg Kroah-Hartman8-9/+36
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.5-rc7 Here are a few fixes for issues related to unbound port devices which could lead to NULL-pointer dereferences. Notably the bind attributes for usb-serial (port) drivers are removed as almost none of the drivers can handle individual ports going away once they've been bound. Included are also some new device ids. All but the unbound-port fixes have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.5-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: quatech2: handle unbound ports USB: serial: keyspan: handle unbound ports USB: serial: io_edgeport: add missing active-port sanity check USB: serial: io_edgeport: handle unbound ports on URB completion USB: serial: ch341: handle unbound port at reset_resume USB: serial: suppress driver bind attributes USB: serial: option: add support for Quectel RM500Q in QDL mode USB: serial: opticon: fix control-message timeouts USB: serial: option: Add support for Quectel RM500Q USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
2020-01-17Merge tag 'fuse-fixes-5.5-rc7' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fix from Miklos Szeredi: "Fix a regression in the last release affecting the ftp module of the gvfs filesystem" * tag 'fuse-fixes-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix fuse_send_readpages() in the syncronous read case
2020-01-17Merge tag 'sound-5.5-rc7' of ↵Linus Torvalds17-94/+234
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This became bigger than I have hoped for rc7. But, the only large LOC is for stm32 fixes that are simple rewriting of register access helpers, while the rest are all nice and small fixes: - A few ASoC fixes for the remaining probe error handling bugs - ALSA sequencer core fix for racy proc file accesses - Revert the option rename of snd-hda-intel to make compatible again - Various device-specific fixes" * tag 'sound-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Fix racy access for queue timer in proc read ALSA: usb-audio: fix sync-ep altsetting sanity check ASoC: msm8916-wcd-digital: Reset RX interpolation path after use ASoC: msm8916-wcd-analog: Fix MIC BIAS Internal1 ASoC: cros_ec_codec: Make the device acpi compatible ASoC: sti: fix possible sleep-in-atomic ASoC: msm8916-wcd-analog: Fix selected events for MIC BIAS External1 ASoC: hdac_hda: Fix error in driver removal after failed probe ASoC: SOF: Intel: fix HDA codec driver probe with multiple controllers ASoC: SOF: Intel: lower print level to dbg if we will reinit DSP ALSA: dice: fix fallback from protocol extension into limited functionality ALSA: firewire-tascam: fix corruption due to spin lock without restoration in SoftIRQ context ALSA: hda: Rename back to dmic_detect option ASoC: stm32: dfsdm: fix 16 bits record ASoC: stm32: sai: fix possible circular locking ASoC: Fix NULL dereference at freeing ASoC: Intel: bytcht_es8316: Fix Irbis NB41 netbook quirk ASoC: rt5640: Fix NULL dereference on module unload
2020-01-17drm/i915/gt: Report the currently active execlists requestChris Wilson1-0/+17
Since commit 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy"), we prune the engine->active.requests list prior to preemption, thus removing the trace of the currently executing request. If that request hangs rather than be preempted, we conclude that no active request was on the GPU. Fortunately, this only impacts our debugging, and not our means of hang detection or recovery. v2: Use from to check the current iterator before continuing, and report active as NULL if the current request is already completed. References: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200117113259.3023890-1-chris@chris-wilson.co.uk
2020-01-17drm/i915: convert to new logging macros in i915/intel_memory_region.cWambui Karuga1-1/+3
Replace the use of printk based logging macros with the new struct drm_device based logging macro in i915/intel_memory_region.c. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1bf4d362e72c619843d44aac96c3561f54e4b23a.1578560355.git.wambui.karugax@gmail.com
2020-01-17drm/i915: convert to new logging macros in i915/intel_gvt.cWambui Karuga1-5/+8
This converts the use of printk based logging macros in i915/intel_gvt.c with the new struct drm_device based logging macros. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/44f3839820a32ed03d73dc56a6ef3581994802c9.1578560355.git.wambui.karugax@gmail.com
2020-01-17drm/i915: conversion to new logging macros in i915/intel_device_info.cWambui Karuga1-11/+14
This replaces the printk and struct device based logging macros with the new struct drm_device style based logging macros i915/intel_device_info.c. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e404429ff2a5e5080867f577beccd7b578a671cd.1578560355.git.wambui.karugax@gmail.com
2020-01-17drm/i915: conversion to new logging macros in i915/intel_csr.cWambui Karuga1-10/+14
Replace the use of printk and struct device based logging macros with the new struct drm_device based logging macros in i915/intel_csr.c Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0ea8e0f39013a73ed66052893a8f8abf8cc23ba6.1578560355.git.wambui.karugax@gmail.com
2020-01-17drm/i915: conversion to new logging macros in i915/i915_vgpu.cWambui Karuga1-16/+25
Replace the use of printk based logging macros with the struct drm_device based macros in i915/i915_vgpu.c Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/45e8bffff8cbffd72ed41901c3db9f7f6dbe79f3.1578560355.git.wambui.karugax@gmail.com
2020-01-17USB: serial: quatech2: handle unbound portsJohan Hovold1-0/+6
Check for NULL port data in the modem- and line-status handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe). Note that the other (stubbed) event handlers qt2_process_xmit_empty() and qt2_process_flush() would need similar sanity checks in case they are ever implemented. Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable <stable@vger.kernel.org> # 3.5 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: keyspan: handle unbound portsJohan Hovold1-0/+4
Check for NULL port data in the control URB completion handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe()). Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: io_edgeport: add missing active-port sanity checkJohan Hovold1-5/+7
The driver receives the active port number from the device, but never made sure that the port number was valid. This could lead to a NULL-pointer dereference or memory corruption in case a device sends data for an invalid port. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: io_edgeport: handle unbound ports on URB completionJohan Hovold1-2/+2
Check for NULL port data in the shared interrupt and bulk completion callbacks to avoid dereferencing a NULL pointer in case a device sends data for a port device which isn't bound to a driver (e.g. due to a malicious device having unexpected endpoints or after an allocation failure on port probe). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: ch341: handle unbound port at reset_resumeJohan Hovold1-1/+5
Check for NULL port data in reset_resume() to avoid dereferencing a NULL pointer in case the port device isn't bound to a driver (e.g. after a failed control request at port probe). Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Cc: stable <stable@vger.kernel.org> # 2.6.30 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17btrfs: check rw_devices, not num_devices for balanceJosef Bacik1-1/+5
The fstest btrfs/154 reports [ 8675.381709] BTRFS: Transaction aborted (error -28) [ 8675.383302] WARNING: CPU: 1 PID: 31900 at fs/btrfs/block-group.c:2038 btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs] [ 8675.390925] CPU: 1 PID: 31900 Comm: btrfs Not tainted 5.5.0-rc6-default+ #935 [ 8675.392780] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 [ 8675.395452] RIP: 0010:btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs] [ 8675.402672] RSP: 0018:ffffb2090888fb00 EFLAGS: 00010286 [ 8675.404413] RAX: 0000000000000000 RBX: ffff92026dfa91c8 RCX: 0000000000000001 [ 8675.406609] RDX: 0000000000000000 RSI: ffffffff8e100899 RDI: ffffffff8e100971 [ 8675.408775] RBP: ffff920247c61660 R08: 0000000000000000 R09: 0000000000000000 [ 8675.410978] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffe4 [ 8675.412647] R13: ffff92026db74000 R14: ffff920247c616b8 R15: ffff92026dfbc000 [ 8675.413994] FS: 00007fd5e57248c0(0000) GS:ffff92027d800000(0000) knlGS:0000000000000000 [ 8675.416146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8675.417833] CR2: 0000564aa51682d8 CR3: 000000006dcbc004 CR4: 0000000000160ee0 [ 8675.419801] Call Trace: [ 8675.420742] btrfs_start_dirty_block_groups+0x355/0x480 [btrfs] [ 8675.422600] btrfs_commit_transaction+0xc8/0xaf0 [btrfs] [ 8675.424335] reset_balance_state+0x14a/0x190 [btrfs] [ 8675.425824] btrfs_balance.cold+0xe7/0x154 [btrfs] [ 8675.427313] ? kmem_cache_alloc_trace+0x235/0x2c0 [ 8675.428663] btrfs_ioctl_balance+0x298/0x350 [btrfs] [ 8675.430285] btrfs_ioctl+0x466/0x2550 [btrfs] [ 8675.431788] ? mem_cgroup_charge_statistics+0x51/0xf0 [ 8675.433487] ? mem_cgroup_commit_charge+0x56/0x400 [ 8675.435122] ? do_raw_spin_unlock+0x4b/0xc0 [ 8675.436618] ? _raw_spin_unlock+0x1f/0x30 [ 8675.438093] ? __handle_mm_fault+0x499/0x740 [ 8675.439619] ? do_vfs_ioctl+0x56e/0x770 [ 8675.441034] do_vfs_ioctl+0x56e/0x770 [ 8675.442411] ksys_ioctl+0x3a/0x70 [ 8675.443718] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 8675.445333] __x64_sys_ioctl+0x16/0x20 [ 8675.446705] do_syscall_64+0x50/0x210 [ 8675.448059] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 8675.479187] BTRFS: error (device vdb) in btrfs_create_pending_block_groups:2038: errno=-28 No space left We now use btrfs_can_overcommit() to see if we can flip a block group read only. Before this would fail because we weren't taking into account the usable un-allocated space for allocating chunks. With my patches we were allowed to do the balance, which is technically correct. The test is trying to start balance on degraded mount. So now we're trying to allocate a chunk and cannot because we want to allocate a RAID1 chunk, but there's only 1 device that's available for usage. This results in an ENOSPC. But we shouldn't even be making it this far, we don't have enough devices to restripe. The problem is we're using btrfs_num_devices(), that also includes missing devices. That's not actually what we want, we need to use rw_devices. The chunk_mutex is not needed here, rw_devices changes only in device add, remove or replace, all are excluded by EXCL_OP mechanism. Fixes: e4d8ec0f65b9 ("Btrfs: implement online profile changing") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add stacktrace, update changelog, drop chunk_mutex ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-01-17Btrfs: always copy scrub arguments back to user spaceFilipe Manana1-1/+13
If scrub returns an error we are not copying back the scrub arguments structure to user space. This prevents user space to know how much progress scrub has done if an error happened - this includes -ECANCELED which is returned when users ask for scrub to stop. A particular use case, which is used in btrfs-progs, is to resume scrub after it is canceled, in that case it relies on checking the progress from the scrub arguments structure and then use that progress in a call to resume scrub. So fix this by always copying the scrub arguments structure to user space, overwriting the value returned to user space with -EFAULT only if copying the structure failed to let user space know that either that copying did not happen, and therefore the structure is stale, or it happened partially and the structure is probably not valid and corrupt due to the partial copy. Reported-by: Graham Cobb <g.btrfs@cobb.uk.net> Link: https://lore.kernel.org/linux-btrfs/d0a97688-78be-08de-ca7d-bcb4c7fb397e@cobb.uk.net/ Fixes: 06fe39ab15a6a4 ("Btrfs: do not overwrite scrub error with fault error in scrub ioctl") CC: stable@vger.kernel.org # 5.1+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Tested-by: Graham Cobb <g.btrfs@cobb.uk.net> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-01-17Merge tag 'gpio-v5.5-4' of ↵Linus Torvalds2-57/+107
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "This reverts the GPIOLIB_IRQCHIP in the ThunderX driver. ThunderX is a piece of Arm-based server chip. I converted the driver to hierarchical gpiochip without access to real silicon and failed miserably since I didn't take MSI's into account. Kevin Hao helpfully stepped in and fixed it properly, let's revert it for v5.5 and put the proper conversion into v5.6" * tag 'gpio-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"
2020-01-17drm/i915/guc: Introduce CT_DEBUGMichal Wajdeczko1-22/+19
As we now have "ct" available almost in all functions we can start using dev variants of logs also for debug. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200117082039.65644-6-michal.wajdeczko@intel.com
2020-01-17drm/i915/guc: Switch to CT_ERROR in ct_readMichal Wajdeczko1-8/+8
As we now have "ct" available in ct_read function we can switch from generic DRM_ERROR to our custom CT_ERROR. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200117082039.65644-5-michal.wajdeczko@intel.com
2020-01-17drm/i915/guc: Don't pass CTB while readingMichal Wajdeczko1-3/+3
Since we only have one RECV buffer we don't need to explicitly pass it to the read function. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200117082039.65644-4-michal.wajdeczko@intel.com
2020-01-17drm/i915/guc: Don't pass CTB while writingMichal Wajdeczko1-6/+7
Since we only have one SEND buffer we don't need to explicitly pass it to the write function. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200117082039.65644-3-michal.wajdeczko@intel.com
2020-01-17drm/i915/guc: Don't GEM_BUG_ON on corrupted G2H CTBMichal Wajdeczko1-16/+22
We should never BUG_ON on any corruption in CTB descriptor as data there can be also modified by the GuC. Instead we can use flag "is_in_error" to indicate that we will not process any further messages over this CTB (until reset). While here move descriptor error reporting to the function that actually touches that descriptor. Note that unexpected content of the specific CT messages, that still complies with generic CT message format, shall not trigger disabling whole CTB, as that might just indicate new unsupported message types. v2: drop redundant message (Daniele) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200117082039.65644-2-michal.wajdeczko@intel.com
2020-01-17Merge tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-blockLinus Torvalds6-10/+17
Pull block fixes from Jens Axboe: "Three fixes that should go into this release: - The 32-bit segment size fix that I mentioned last week (Ming) - Use uint for the block size (Mikulas) - A null_blk zone write handling fix (Damien)" * tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block: block: fix an integer overflow in logical block size null_blk: Fix zone write handling block: fix get_max_segment_size() overflow on 32bit arch
2020-01-17drm/i915: Satisfy smatch that a loop has at least one iterationChris Wilson1-0/+1
Smatch worries that the engine->mask may be 0 leading to the loop being shortcircuited leaving the next pointer unset, drivers/gpu/drm/i915/i915_active.c:667 i915_active_acquire_preallocate_barrier() error: uninitialized symbol 'next'. Assert that mask is not 0 and smatch can then verify that next must be initialised before use. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200117110603.2982286-1-chris@chris-wilson.co.uk
2020-01-17drm/i915: Fix typo in kerneldoc function nameChris Wilson1-1/+1
A forgetful copy'n'paste left the name of the old function intact, and did not introduce the new function 'i915_request_is_ready' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200117101639.2908469-1-chris@chris-wilson.co.uk
2020-01-17drm/i915: Fix i915_error_state_store error definationZhang Xiaoxu1-2/+1
Since commit 742379c0c4001 ("drm/i915: Start chopping up the GPU error capture"), function 'i915_error_state_store' was defined and used with only one parameter. But if no 'CONFIG_DRM_I915_CAPTURE_ERROR', this function was defined with two parameter. This may lead compile error. This patch fix it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200117073436.6507-1-zhangxiaoxu5@huawei.com
2020-01-17drm/i915: Include the debugfs params header for its own definitionChris Wilson1-0/+1
drivers/gpu/drm/i915/i915_debugfs_params.c:228:15: warning: symbol 'i915_debugfs_params' was not declared. Should it be static? drivers/gpu/drm/i915/i915_debugfs_params.c:228:16: error: no previous prototype for ‘i915_debugfs_params’ [-Werror=missing-prototypes] 228 | struct dentry *i915_debugfs_params(struct drm_i915_private *i915) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Fixes: c43c5a8818d4 ("drm/i915/params: add i915 parameters to debugfs") Link: https://patchwork.freedesktop.org/patch/msgid/20200117102145.2948244-1-chris@chris-wilson.co.uk
2020-01-17net: systemport: Fixed queue mapping in internal ring mapFlorian Fainelli1-3/+4
We would not be transmitting using the correct SYSTEMPORT transmit queue during ndo_select_queue() which looks up the internal TX ring map because while establishing the mapping we would be off by 4, so for instance, when we populate switch port mappings we would be doing: switch port 0, queue 0 -> ring index #0 switch port 0, queue 1 -> ring index #1 ... switch port 0, queue 3 -> ring index #3 switch port 1, queue 0 -> ring index #8 (4 + 4 * 1) ... instead of using ring index #4. This would cause our ndo_select_queue() to use the fallback queue mechanism which would pick up an incorrect ring for that switch port. Fix this by using the correct switch queue number instead of SYSTEMPORT queue number. Fixes: 25c440704661 ("net: systemport: Simplify queue mapping logic") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17net: dsa: bcm_sf2: Configure IMP port for 2Gb/secFlorian Fainelli1-1/+1
With the implementation of the system reset controller we lost a setting that is currently applied by the bootloader and which configures the IMP port for 2Gb/sec, the default is 1Gb/sec. This is needed given the number of ports and applications we expect to run so bring back that setting. Fixes: 01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17net: dsa: sja1105: Don't error out on disabled ports with no phy-modeVladimir Oltean1-1/+1
The sja1105_parse_ports_node function was tested only on device trees where all ports were enabled. Fix this check so that the driver continues to probe only with the ports where status is not "disabled", as expected. Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17drm/i915: Auto detect DPCD backlight support by defaultLyude Paul2-2/+2
Turns out we actually already have some companies, such as Lenovo, shipping machines with AMOLED screens that don't allow controlling the backlight through the usual PWM interface and only allow controlling it through the standard EDP DPCD interface. One example of one of these laptops is the X1 Extreme 2nd Generation. Since we've got systems that need this turned on by default now to have backlight controls working out of the box, let's start auto-detecting it for systems by default based on what the VBT tells us. We do this by changing the default value for the enable_dpcd_backlight module param from 0 to -1. Tested-by: AceLan Kao <acelan.kao@canonical.com> Tested-by: Perry Yuan <pyuan@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-6-lyude@redhat.com
2020-01-17drm/i915: Fix DPCD register order in intel_dp_aux_enable_backlight()Lyude Paul1-1/+2
For eDP panels, it appears it's expected that so long as the panel is in DPCD control mode that the brightness value is never set to 0. Instead, if the desired effect is to set the panel's backlight to 0 we're expected to simply turn off the backlight through the DP_EDP_DISPLAY_CONTROL_REGISTER. We already do the latter correctly in intel_dp_aux_disable_backlight(). But, we make the mistake of writing the DPCD registers in the wrong order when enabling the backlight in intel_dp_aux_enable_backlight() since we currently enable the backlight through DP_EDP_DISPLAY_CONTROL_REGISTER before writing the brightness level. On the X1 Extreme 2nd Generation, this appears to have the potential of confusing the panel in such a way that further attempts to set the brightness don't actually change the backlight as expected and leave it off. Presumably, this happens because the incorrect register writing order briefly leaves the panel with DPCD mode enabled and a 0 brightness level set. So, reverse the order we write the DPCD registers when enabling the panel backlight so that we write the brightness value first, and enable the backlight second. This fix appears to be the final bit needed to get the backlight on the ThinkPad X1 Extreme 2nd Generation's AMOLED screen working. Tested-by: AceLan Kao <acelan.kao@canonical.com> Tested-by: Perry Yuan <pyuan@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-4-lyude@redhat.com
2020-01-17drm/i915: Assume 100% brightness when not in DPCD control modeLyude Paul1-0/+17
Currently we always determine the initial panel brightness level by simply reading the value from DP_EDP_BACKLIGHT_BRIGHTNESS_MSB/LSB. This seems wrong though, because if the panel is not currently in DPCD control mode there's not really any reason why there would be any brightness value programmed in the first place. This appears to be the case on the Lenovo ThinkPad X1 Extreme 2nd Generation, where the default value in these registers is always 0 on boot despite the fact the panel runs at max brightness by default. Getting the initial brightness value correct here is important as well, since the panel on this laptop doesn't behave well if it's ever put into DPCD control mode while the brightness level is programmed to 0. So, let's fix this by checking what the current backlight control mode is before reading the brightness level. If it's in DPCD control mode, we return the programmed brightness level. Otherwise we assume 100% brightness and return the highest possible brightness level. This also prevents us from accidentally programming a brightness level of 0. This is one of the many fixes that gets backlight controls working on the ThinkPad X1 Extreme 2nd Generation with optional 4K AMOLED screen. Changes since v1: * s/DP_EDP_DISPLAY_CONTROL_REGISTER/DP_EDP_BACKLIGHT_MODE_SET_REGISTER/ - Jani Tested-by: AceLan Kao <acelan.kao@canonical.com> Tested-by: Perry Yuan <pyuan@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-3-lyude@redhat.com
2020-01-17drm/i915: Fix eDP DPCD aux max backlight calculationsLyude Paul2-47/+95
Max backlight value for the panel was being calculated using byte count i.e. 0xffff if 2 bytes are supported for backlight brightness and 0xff if 1 byte is supported. However, EDP_PWMGEN_BIT_COUNT determines the number of active control bits used for the brightness setting. Thus, even if the panel uses 2 byte setting, it might not use all the control bits. Thus, max backlight should be set based on the value of EDP_PWMGEN_BIT_COUNT instead of assuming 65535 or 255. Additionally, EDP_PWMGEN_BIT_COUNT was being updated based on the VBT frequency which results in a different max backlight value. Thus, setting of EDP_PWMGEN_BIT_COUNT is moved to setup phase instead of enable so that max backlight can be calculated correctly. Only the frequency divider is set during the enable phase using the value of EDP_PWMGEN_BIT_COUNT. This is based off the original patch series from Furquan Shaikh <furquan@google.com>: https://patchwork.freedesktop.org/patch/317255/?series=62326&rev=3 Changes since original patch: * Remove unused intel_dp variable in intel_dp_aux_setup_backlight() * Fix checkpatch issues * Make sure that we rewrite the pwmgen bit count whenever we bring the panel out of D3 mode v2 by Jani: * rebase * fix readb return value check Cc: Furquan Shaikh <furquan@google.com> Tested-by: AceLan Kao <acelan.kao@canonical.com> Tested-by: Perry Yuan <pyuan@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200116211623.53799-2-lyude@redhat.com
2020-01-17drm/i915/dsi: Lookup the i2c bus from ACPI NS only if CONFIG_ACPI=y (v2)Vivek Kasireddy1-16/+31
Perform the i2c bus/adapter lookup from ACPI Namespace only if ACPI is enabled in the kernel config. If ACPI is not enabled or if the lookup fails, we'll fallback to using the VBT for identifying the i2c bus. v2: Add fixes tag (Jani) Fixes: 8cbf89db2941 ("drm/i915/dsi: Parse the I2C element from the VBT MIPI sequence block (v3)") Cc: Hans de Goede <hdegoede@redhat.com> Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200115012305.27395-1-vivek.kasireddy@intel.com
2020-01-17net: phy: dp83867: Set FORCE_LINK_GOOD to default after resetMichael Grzeschik1-1/+7
According to the Datasheet this bit should be 0 (Normal operation) in default. With the FORCE_LINK_GOOD bit set, it is not possible to get a link. This patch sets FORCE_LINK_GOOD to the default value after resetting the phy. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17perf/x86/intel/uncore: Remove PCIe3 unit for SNRKan Liang1-24/+0
The PCIe Root Port driver for CPU Complex PCIe Root Ports are not loaded on SNR. The device ID for SNR PCIe3 unit is used by both uncore driver and the PCIe Root Port driver. If uncore driver is loaded, the PCIe Root Port driver never be probed. Remove the PCIe3 unit for SNR for now. The support for PCIe3 unit will be added later separately. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200116200210.18937-2-kan.liang@linux.intel.com
2020-01-17perf/x86/intel/uncore: Fix missing marker for snr_uncore_imc_freerunning_eventsKan Liang1-0/+1
An Oops during the boot is found on some SNR machines. It turns out this is because the snr_uncore_imc_freerunning_events[] array was missing an end-marker. Fixes: ee49532b38dd ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge") Reported-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Like Xu <like.xu@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200116200210.18937-1-kan.liang@linux.intel.com
2020-01-17perf/x86/intel/uncore: Add PCI ID of IMC for Xeon E3 V5 FamilyKan Liang1-0/+6
The IMC uncore support is missed for E3-1585 v5 CPU. Intel Xeon E3 V5 Family has Sky Lake CPU. Add the PCI ID of IMC for Intel Xeon E3 V5 Family. Reported-by: Rosales-fernandez, Carlos <carlos.rosales-fernandez@intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Rosales-fernandez, Carlos <carlos.rosales-fernandez@intel.com> Link: https://lkml.kernel.org/r/1578687311-158748-1-git-send-email-kan.liang@linux.intel.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 22:33:01 +0300