summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-02-04MIPS: Alchemy: Fix DB1100 GPIO registrationManuel Lauss1-5/+2
With CONFIG_GPIOLIB=y gpios need to be requested before they can be modified. Request the SD carddetect pins, and drop the SPI direction setup, as the driver does that for us anyway. This gets rid of a lot of WARN_ON()s triggered by GPIO core, and restores functionality of the touschreen controller. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/6497/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-02-04ipvs: fix AF assignment in ip_vs_conn_new()Michal Kubecek1-4/+4
If a fwmark is passed to ip_vs_conn_new(), it is passed in vaddr, not daddr. Therefore we should set AF to AF_UNSPEC in vaddr assignment (like we do in ip_vs_ct_in_get()), otherwise we may copy only first 4 bytes of an IPv6 address into cp->daddr. Signed-off-by: Bogdano Arendartchuk <barendartchuk@suse.com> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2014-02-04[media] adv7842: Composite free-run platfrom-data fixMartin Bugge1-1/+1
Incorrectly setting of free-run for Composite. Copy/paste regression fix. Signed-off-by: Martin Bugge <marbugge@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] v4l2-dv-timings: fix GTF calculationMartin Bugge1-0/+1
Round off image width to nearest 8 (GTF_CELL_GRAN) A source sending a GTF (Generalized Timing Formula) format have no means of signalling image width. The assumed aspect ratio may result in an odd image width but according to the standard image width should be in multiple of 8. Cc: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Martin Bugge <marbugge@cisco.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] hdpvr: Fix memory leak in debugMasanari Iida1-1/+3
cppcheck reported memory leak in device_authorizatio() within hdpvr-core.c. When the debug option is specified and the code jump to "unlock:" label, print_buf was not freed. Confirm the module succesfully compiled without error. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2Antti Palosaari1-0/+2
Add USB ID [2040:f900] for Hauppauge WinTV-MiniStick 2. Device is build upon IT9135 chipset. Tested-by: Stefan Becker <schtefan@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] mxl111sf: Fix compile when CONFIG_DVB_USB_MXL111SF is unsetDave Jones1-1/+1
Fix the following build error: drivers/media/usb/dvb-usb-v2/ mxl111sf-tuner.h:72:9: error: expected ‘;’, ‘,’ or ‘)’ before ‘struct’ struct mxl111sf_tuner_config *cfg) Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] mxl111sf: Fix unintentional garbage stack readDave Jones1-1/+1
mxl111sf_read_reg takes an address of a variable to write to as an argument. drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c:mxl111sf_config_pin_mux_modes passes several uninitialized stack variables to this routine, expecting them to be filled in. In the event that something unexpected happens when reading from the chip, we end up doing a pr_debug of the value passed in, revealing whatever garbage happened to be on the stack. Change the pr_debug to match what happens in the 'success' case, where we assign buf[1] to *data. Spotted with Coverity (Bugs 731910 through 731917) Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] cx24117: use a valid dev pointer for dev_err printoutAndi Shyti1-1/+1
Don't use '&state->priv->i2c->dev' reference to device because state is still 'NULL'. Use '&i2c->dev' instead. This bug has been reported by scan.coverity.com Signed-off-by: Andi Shyti <andi@etezian.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: vger@stable.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] cx24117: remove dead code in always 'false' if statementAndi Shyti1-8/+0
At this point of the execution in the function cx24117_attach() demod cannot be '0'. In that case the function returns earlier with an error value ('NULL'). Remove the if statement. This error has been reported by scan.coverity.com Signed-off-by: Andi Shyti <andi@etezian.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] update Michael Krufky's email addressMichael Krufky17-20/+20
I am no longer available at the kernellabs.com or m1k.net email addresses. Update each instance of my email to my linuxtv.org account. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] vb2: Check if there are buffers before streamonRicardo Ribalda1-0/+5
This patch adds a test preventing streamon() if there is no buffer ready. Without this patch, a user could call streamon() before preparing any buffer. This leads to a situation where if he calls close() before calling streamoff() the device is kept streaming. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] Revert "[media] videobuf_vm_{open,close} race fixes"Hans Verkuil3-19/+13
This reverts commit a242f426108c284049a69710f871cc9f11b13e61. That commit actually caused deadlocks, rather then fixing them. If ext_lock is set to NULL (otherwise videobuf_queue_lock doesn't do anything), then you get this deadlock: The driver's mmap function calls videobuf_mmap_mapper which calls videobuf_queue_lock on q. videobuf_mmap_mapper calls __videobuf_mmap_mapper, __videobuf_mmap_mapper calls videobuf_vm_open and videobuf_vm_open calls videobuf_queue_lock on q (introduced by above patch): deadlocked. This affects drivers using dma-contig and dma-vmalloc. Only dma-sg is not affected since it doesn't call videobuf_vm_open from __videobuf_mmap_mapper. Most drivers these days have a non-NULL ext_lock. Those that still use NULL there are all fairly obscure drivers, which is why this hasn't been seen earlier. Since everything worked perfectly fine for many years I prefer to just revert this patch rather than trying to fix it. videobuf is quite fragile and I rather not touch it too much. Work is (slowly) progressing to move everything over to vb2 or at the very least use non-NULL ext_lock in videobuf. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v3.11 and up Cc: Al Viro <viro@ZenIV.linux.org.uk> Reported-by: Pete Eberlein <pete@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] go7007-loader: fix usb_dev leakAlexey Khoroshilov1-1/+3
There is usb_get_dev() in go7007_loader_probe(), but there is no usb_put_dev() anywhere. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] media: bt8xx: add missing put_device callLevente Kurusa1-1/+1
This is required so that we give up the last reference to the device. Remove the kfree() because the put_device() call will actually call release_sub_device which in turn kfrees the device. Signed-off-by: Levente Kurusa <levex@linux.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] exynos4-is: Compile in fimc-lite runtime PM callbacks conditionallySylwester Nawrocki1-0/+2
Enclose the runtime PM helpers in #ifdef CONFIG_PM_RUNTIME/#endif to avoid following compile warning when CONFIG_PM_RUNTIME is disabled: CC drivers/media/platform/exynos4-is/fimc-lite.o drivers/media/platform/exynos4-is/fimc-lite.c:1591:12: warning: ‘fimc_lite_runtime_resume’ defined but not used [-Wunused-function] drivers/media/platform/exynos4-is/fimc-lite.c:1599:12: warning: ‘fimc_lite_runtime_suspend’ defined but not used [-Wunused-function] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] exynos4-is: Compile in fimc runtime PM callbacks conditionallySylwester Nawrocki1-0/+2
Enclose the runtime PM helpers in #ifdef CONFIG_PM_RUNTIME/#endif to avoid following compile warning when CONFIG_PM_RUNTIME is disabled: CC drivers/media/platform/exynos4-is/fimc-core.o drivers/media/platform/exynos4-is/fimc-core.c:1040:12: warning: ‘fimc_runtime_resume’ defined but not used drivers/media/platform/exynos4-is/fimc-core.c:1057:12: warning: ‘fimc_runtime_suspend’ defined but not used Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] exynos4-is: Fix error paths in probe() for !pm_runtime_enabled()Sylwester Nawrocki2-3/+5
Ensure clk_disable() is called on error paths only when clk_enable() was previously called. This fixes following build warning: .../media-git/drivers/media/platform/exynos4-is/fimc-lite.c: In function 'fimc_lite_probe': .../media-git/drivers/media/platform/exynos4-is/fimc-lite.c:1583:1: warning: label 'err_sd' defined but not used [-Wunused-label] Reported-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] s5p-jpeg: Fix wrong NV12 format parametersJacek Anaszewski1-4/+4
NV12 format entries in the sjpeg_formats array had wrong colplanes, depth and v_align values. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] s5k5baf: allow to handle arbitrary long i2c sequencesAndrzej Hajda1-11/+19
Using variable length array in s5k5baf_write_arr_seq caused an implicit assumption that i2c sequences should be short. The patch rewrites the function so it can handle sequences of any length and does not use variable length array. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04ALSA: hda - Fix silent output on Toshiba Satellite L40Takashi Iwai1-0/+19
Toshiba Satellite L40 with AD1986A codec requires the EAPD of NID 0x1b to be constantly on, otherwise the output doesn't work. Unlike most of other AD1986A machines, EAPD is correctly implemented in HD-audio manner (that is, bit set = amp on), so we need to clear the inv_eapd flag in the fixup, too. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67481 Cc: <stable@vger.kernel.org> [v3.11+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-04ARM: shmobile: Remove Lager USBHS UDC ifdefsMagnus Damm1-4/+0
Remove ifdefs to make the Lager USBHS device always present. This makes it more like other devices, no need to be special. Also, these ifdefs by themselves do not hurt much, but combined with USB Host device ifdefs that were proposed earlier we could basically end up with a kernel that drives VBUS incorrectly depending on the kernel configuration - lets not do that. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: lager: Add USBHS supportValentine Barshak1-0/+138
This adds USBHS PHY and registers USBHS device if the driver is enabled. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: koelsch: fix error return code check from clk_get()Ben Dooks1-2/+2
The koelsch_add_standard_devices() function calls clk_get() but then fails to check that it returns an error pointer instead of NULL on failure. This was added by f31239ef ("ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMT") in Simon Horman's renesas-boards2-for-v3.14 tag. The issue is not serious as it does not cause a crash and seems to not be actually causing any issues now the other clock bugs have been fixed. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [horms+renesas@verge.net.au: tweaked changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: lager: fix error return code check from clk_get()Ben Dooks1-2/+2
The lager_add_standard_devices() function calls clk_get() but then fails to check that it returns an error pointer instead of NULL on failure. This was added by 4a606af2 ("ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMT") patch in Simon Horman's renesas-boards2-for-v3.14 tag. The issue is not serious as it does not cause a crash and seems to not be actually causing any issues now the other clock bugs have been fixed. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [horms+renesas@verge.net.au: tweaked changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: marzen: Conditionally select SMSC_PHYSimon Horman1-0/+2
The marzen board uses has an SMSC911X ethernet controller which uses an SMSC phy. Select SMSC_PHY for marzen if SMSC911X is enabled to make use of the SMSC-specific phy driver rather than relying on the generic phy driver. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: mackerel: Conditionally select SMSC_PHYSimon Horman1-0/+1
The mackerel board uses has an SMSC911X ethernet controller which uses an SMSC phy. Select SMSC_PHY for mackerel if SMSC911X is enabled to make use of the SMSC-specific phy driver rather than relying on the generic phy driver. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: kzm9d: Conditionally select SMSC_PHYSimon Horman1-0/+1
The kzm9d board uses has an SMSC911X ethernet controller which uses an SMSC phy. Select SMSC_PHY for kzm9d if SMSC911X is enabled to make use of the SMSC-specific phy driver rather than relying on the generic phy driver. This only covers the case of multiplatform kzm9d as there is currently no Kconfig node for non-multiplatform kzm9d. One could be added if desired. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: ape6evm: enable CONFIG_DEVTMPFS in defconfigKuninori Morimoto1-0/+2
DEVTMPFS is needed for udev Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: armadillo: enable CONFIG_DEVTMPFS in defconfigKuninori Morimoto1-0/+2
DEVTMPFS is needed for udev Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: bockw: enable CONFIG_DEVTMPFS in defconfigKuninori Morimoto1-0/+2
This reverts commit e14ee5deab24200e4b70fe31a8c806f0acd3d37c ("ARM: shmobile: bockw: Do not enable CONFIG_DEVTMPFS defconfig"). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [horms+renesas@verge.net.au: Added subject of reverted commit to changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: genmai: enable CONFIG_DEVTMPFS in defconfigKuninori Morimoto1-0/+2
DEVTMPFS is needed for udev Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: kzm9d: enable CONFIG_DEVTMPFS in defconfigKuninori Morimoto1-0/+2
DEVTMPFS is needed for udev Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: kzm9g: enable CONFIG_DEVTMPFS in defconfigKuninori Morimoto1-0/+2
DEVTMPFS is needed for udev Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: lager: enable CONFIG_DEVTMPFS in defconfigKuninori Morimoto1-0/+2
DEVTMPFS is needed for udev Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [horms+renesas@verge.net.au: resolved trivial conflict] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: mackerel: enable CONFIG_DEVTMPFS in defconfigKuninori Morimoto1-0/+2
DEVTMPFS is needed for udev Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: marzen: enable CONFIG_DEVTMPFS in defconfigKuninori Morimoto1-0/+2
This reverts commit 41307133da4b6f242ecbb45950b9d043c0b21b96 ("ARM: shmobile: marzen: Do not enable CONFIG_DEVTMPFS defconfig"). DEVTMPFS is needed for udev. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [horms+renesas@verge.net.au: Added subject of reverted patch to changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: lager: Enable SATA in defconfigValentine Barshak1-0/+3
This enables R-Car SATA and SCSI disk in lager_defconfig. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: koelsch: Enable DEVTMPFS_MOUNT in defconfigGeert Uytterhoeven1-0/+2
Without this, a Debian jessie nfsroot hangs early in the boot process. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> [horms+renesas@verge.net.au: resolved trivial conflict] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: koelsch: Enable SATA in defconfigValentine Barshak1-1/+3
This enables block layer, R-Car SATA and SCSI disk in koelsch_defconfig. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: lager: Enable VIN along with ADV7180 decoder in defconfigValentine Barshak1-0/+8
This enables R-Car VIN SoC camera along with ADV7180 decoder, which can be found on Lager board, to lager_defconfig. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: bockw: Sort Kconfig node's selectionsSimon Horman1-2/+2
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: armadillo800eva: Conditionally select SMSC_PHYSimon Horman1-0/+2
The armadillo800eva board uses has an SH ethernet controller which uses an SMSC phy. Select SMSC_PHY for koelsch if SH_ETH is enabled to make use of the SMSC-specific phy driver rather than relying on the generic phy driver. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: ape6evm: Conditionally select SMSC_PHYSimon Horman1-0/+2
The ape6evm board uses has an SMSC911X ethernet controller which uses an SMSC phy. Select SMSC_PHY for ape6evm if SMSC911X is enabled to make use of the SMSC-specific phy driver rather than relying on the generic phy driver. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: koelsch: Add SATA0 supportValentine Barshak1-0/+17
This adds SATA0 support to Koelsch board. SATA1 is not available since its pinmux configuration is fixed to PCIe. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: lager: Add SATA supportValentine Barshak1-0/+17
This adds SATA support to Lager board. Only SATA1 port is available. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Magnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: resolved trivial conflicts] [horms+renesas@verge.net.au: capitalised "ARM" in subject] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: lager: Make spi_flash_data constGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: kzm9d: Use common clock frameworkTakashi Yoshii1-3/+2
Use common clock framework version of clock drivers/clk/shmobile/clk-emev2.c instead of sh-clkfwk version arch/arm/mach-shmobile/clock-emev2.c when it is configured as a part of multi-platform. Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: lager: Add VIN1 SoC camera supportValentine Barshak1-0/+76
This adds VIN1 SoC camera along with ADV7180 subdevice support to Lager. VIN0 camera is not registered because it has ADV7612 I2C subdevice which is not supported yet. Changes in V2: * made lager_add_vin_device function static. Changes in V3: * capitalized ARM in the subject. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: mach-shmobile: kzm9g: add zboot supportUlrich Hecht3-0/+456
Adds support to run the kernel on the uninitialized KZM9G board, using for instance the mask ROM boot loader or JTAG. This patch tries to emulate the style of the corresponding "mackerel" implementation. The DRAM controller setup code has been adapted from u-boot. Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 20:19:46 +0300