summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-10-26can: kvaser_usb: Compare requested bittiming parameters with actual ↵Jimmy Assarsson4-41/+284
parameters in do_set_{,data}_bittiming The device will respond with a CMD_ERROR_EVENT command, with error_code KVASER_USB_{LEAF,HYDRA}_ERROR_EVENT_PARAM, if the CMD_SET_BUSPARAMS_REQ contains invalid bittiming parameters. However, this command does not contain any channel reference. To check if the CMD_SET_BUSPARAMS_REQ was successful, redback and compare the requested bittiming parameters with the device reported parameters. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi> Co-developed-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-12-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-26can: kvaser_usb: Add struct kvaser_usb_busparamsJimmy Assarsson3-31/+27
Add struct kvaser_usb_busparams containing the busparameters used in CMD_{SET,GET}_BUSPARAMS* commands. Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-11-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-26can: kvaser_usb_leaf: Fix bogus restart eventsAnssi Hannula1-3/+3
When auto-restart is enabled, the kvaser_usb_leaf driver considers transition from any state >= CAN_STATE_BUS_OFF as a bus-off recovery event (restart). However, these events may occur at interface startup time before kvaser_usb_open() has set the state to CAN_STATE_ERROR_ACTIVE, causing restarts counter to increase and CAN_ERR_RESTARTED to be sent despite no actual restart having occurred. Fix that by making the auto-restart condition checks more strict so that they only trigger when the interface was actually in the BUS_OFF state. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-10-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-26can: kvaser_usb_leaf: Ignore stale bus-off after startAnssi Hannula1-1/+30
With 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 it was observed that if the device was bus-off when stopped, at next start (either via interface down/up or manual bus-off restart) the initial CMD_CHIP_STATE_EVENT received just after CMD_START_CHIP_REPLY will have the M16C_STATE_BUS_OFF bit still set, causing the interface to immediately go bus-off again. The bit seems to internally clear quickly afterwards but we do not get another CMD_CHIP_STATE_EVENT. Fix the issue by ignoring any initial bus-off state until we see at least one bus-on state. Also, poll the state periodically until that occurs. It is possible we lose one actual immediately occurring bus-off event here in which case the HW will auto-recover and we see the recovery event. We will then catch the next bus-off event, if any. This issue did not reproduce with 0bfd:0017 Kvaser Memorator Professional HS/HS FW 2.0.50. Fixes: 71873a9b38d1 ("can: kvaser_usb: Add support for more Kvaser Leaf v2 devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-9-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-26can: kvaser_usb_leaf: Fix wrong CAN state after stoppingAnssi Hannula1-0/+4
0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 sends a CMD_CHIP_STATE_EVENT indicating bus-off after stopping the device, causing a stopped device to appear as CAN_STATE_BUS_OFF instead of CAN_STATE_STOPPED. Fix that by not handling error events on stopped devices. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-8-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-26can: kvaser_usb_leaf: Fix improved state not being reportedAnssi Hannula3-3/+81
The tested 0bfd:0017 Kvaser Memorator Professional HS/HS FW 2.0.50 and 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 do not seem to send any unsolicited events when error counters decrease or when the device transitions from ERROR_PASSIVE to ERROR_ACTIVE (or WARNING). This causes the interface to e.g. indefinitely stay in the ERROR_PASSIVE state. Fix that by asking for chip state (inc. counters) event every 0.5 secs when error counters are non-zero. Since there are non-error-counter devices, also always poll in ERROR_PASSIVE even if the counters show zero. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-26can: kvaser_usb_leaf: Set Warning state even without bus errorsAnssi Hannula1-12/+8
kvaser_usb_leaf_rx_error_update_can_state() sets error state according to error counters when the hardware does not indicate a specific state directly. However, this is currently gated behind a check for M16C_STATE_BUS_ERROR which does not always seem to be set when error counters are increasing, and may not be set when error counters are decreasing. This causes the CAN_STATE_ERROR_WARNING state to not be set in some cases even when appropriate. Change the code to set error state from counters even without M16C_STATE_BUS_ERROR. The Error-Passive case seems superfluous as it is already set via M16C_STATE_BUS_PASSIVE flag above, but it is kept for now. Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-26can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENTJimmy Assarsson1-0/+99
The device will send an error event command, to indicate certain errors. This indicates a misbehaving driver, and should never occur. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi> Co-developed-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-26can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to ↵Jimmy Assarsson1-19/+19
{leaf,usbcan}_cmd_can_error_event Prepare for handling CMD_ERROR_EVENT. Rename struct {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Reported-by: Anssi Hannula <anssi.hannula@bitwise.fi> Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-26can: kvaser_usb: kvaser_usb_leaf: Get capabilities from deviceJimmy Assarsson1-1/+143
Use the CMD_GET_CAPABILITIES_REQ command to query the device for certain capabilities. We are only interested in LISTENONLY mode and wither the device reports CAN error counters. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Reported-by: Anssi Hannula <anssi.hannula@bitwise.fi> Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-20Merge patch series "can: gs_usb: new features: GS_CAN_FEATURE_GET_STATE, ↵Marc Kleine-Budde1-12/+61
GS_CAN_FEATURE_BERR_REPORTING" Marc Kleine-Budde <mkl@pengutronix.de> says: this series targets the gs_us driver. First there are some cleanup patches by me, followed by now 4 patches by Jeroen Hofstee's. These patches are based on the venus-5.19.4-gsusb branch of his Linux repository and add 2 new features (GS_CAN_FEATURE_GET_STATE, GS_CAN_FEATURE_BERR_REPORTING) to the driver. Changes since v2: https://lore.kernel.org/all/20221019213035.1607752-1-mkl@pengutronix.de - 7/7: add missing endianness conversion Changes since v1: https://lore.kernel.org/all/20221006162452.200322-1-mkl@pengutronix.de - added Jeroen's S-o-b to patches 4...7 - split former "[PATCH 4/6] can: gs_usb: add ability to enable / disable berr rerporting" into 2 patches, fix subject, update patch description Changes since venus-5.19.4-gsusb: https://github.com/jhofstee/linux/tree/venus-5.19.4-gsusb - fixed 2nd parameter of usb_control_msg_recv() - rebased to current net-next/main - renumbered the FEATURE, MODE and BREQ bits, as termination support landed mainline first - split GS_CAN_FEATURE_GET_STATE patch into documentation and implementation part - added Not-Signed-off-by: tag, as these patches are not Signed-off yet Link: https://lore.kernel.org/all/20221019221016.1659260-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-20can: gs_usb: add support for reading error countersJeroen Hofstee1-0/+39
Add support for reading the device state and CAN error counters, using the GS_USB_BREQ_GET_STATE control message, if supported by the device, indicated by the GS_CAN_FEATURE_GET_STATE feature flag. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Link: https://lore.kernel.org/all/20221019221016.1659260-8-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-20can: gs_usb: document GS_CAN_FEATURE_GET_STATEJeroen Hofstee1-1/+4
Document the new feature ("GS_CAN_FEATURE_GET_STATE") that indicates that the state of the CAN controller can be queried with the new GS_USB_BREQ_GET_STATE control message. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Link: https://lore.kernel.org/all/20221019221016.1659260-7-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-20can: gs_usb: add ability to enable / disable berr reportingJeroen Hofstee1-0/+6
The open source firmware candleLight report bus errors unconditionally. This adds support to enable / disable bus error reporting with the standard netlink property. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Link: https://lore.kernel.org/all/20221019221016.1659260-6-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-20can: gs_usb: document GS_CAN_FEATURE_BERR_REPORTINGJeroen Hofstee1-1/+3
Document the new feature ("GS_CAN_FEATURE_BERR_REPORTING") that indicates that the bus error reporting in the CAN controller can switched on and off with the GS_CAN_MODE_BERR_REPORTING mode bit in the GS_USB_BREQ_MODE control message. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Link: https://lore.kernel.org/all/20221019221016.1659260-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-20can: gs_usb: gs_can_open(): merge setting of timestamp flags and initMarc Kleine-Budde1-3/+3
Merge the bodies of 2 consecutive "if (dev->feature & GS_CAN_FEATURE_HW_TIMESTAMP)" statements. Link: https://lore.kernel.org/all/20221019221016.1659260-4-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-20can: gs_usb: gs_can_open(): sort checks for ctrlmodeMarc Kleine-Budde1-7/+5
Sort the checks for dev->can.ctrlmode by values of CAN_CTRLMODE_*, so that it's clear where to add new checks. While there, remove the comment that the Atmel UC3C hardware doesn't support One Shot Mode. The One Shot mode is only available and to be activated by the user, if the device specifies the feature bit GS_CAN_FEATURE_ONE_SHOT. Link: https://lore.kernel.org/all/20221019221016.1659260-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-20can: gs_usb: gs_can_open(): allow loopback and listen only at the same timeMarc Kleine-Budde1-1/+2
There's no reason why loopback and listen only should not be allowed at the same time. Replace the "else if" by "if" to reflect this in the code. Link: https://lore.kernel.org/all/20221019221016.1659260-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-20can: gs_usb: gs_make_candev(): set netdev->dev_idMarc Kleine-Budde1-0/+1
The gs_usb driver supports USB devices with more than 1 CAN channel. Set the "netdev->dev_id" to distinguish between channels in user space. Link: https://lore.kernel.org/all/20221007075418.213403-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-20can: gs_usb: mention candleLight as supported deviceMarc Kleine-Budde1-3/+6
To make it easier for new users to find the correct driver for candleLight compatible CAN-USB devices mention candleLight in the driver's Kconfig input prompt. Link: https://lore.kernel.org/all/20221019205037.1600936-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-20can: m_can: m_can_handle_bus_errors(): add support for handling DLEC error ↵Vivek Yadav1-1/+10
on CAN-FD frames When a frame in CAN FD format has reached the data phase, the next CAN event (error or valid frame) will be shown in DLEC. Utilize the dedicated flag (Data Phase Last Error Code: DLEC flag) to determine the type of last error that occurred in the data phase of a CAN-FD frame and handle the bus errors. Signed-off-by: Vivek Yadav <vivek.2311@samsung.com> Link: https://lore.kernel.org/all/20221018081934.1336690-1-mkl@pengutronix.de Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-20can: m_can: is_lec_err(): clean up LEC error handlingMarc Kleine-Budde2-8/+9
The PSR register contains among other the error for the CAN arbitration phase (LEC bits) and CAN data phase (DLEC bits). Prepare is_lec_err() to be called with the (D)LEC value only instead of the whole PSR register. While there rename LEC_UNUSED to LEC_NO_CHANGE to match the latest M_CAN reference manual. Link: https://lore.kernel.org/all/20221019211611.1605764-1-mkl@pengutronix.de Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-19can: kvaser_usb: Remove -Warray-bounds exceptionKees Cook1-5/+0
GCC-12 emits false positive -Warray-bounds warnings with CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1], and there is top-level Makefile logic to remove -Warray-bounds for known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable '-Warray-bounds' universally for now"). Remove the local work-around. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679 Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20221006192035.1742912-1-keescook@chromium.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-19can: ucan: Replace zero-length array with DECLARE_FLEX_ARRAY() helperGustavo A. R. Silva1-1/+2
Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/214 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/YzIdHDdz30BH4SAv@work Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-19can: remove obsolete PCH CAN driverOliver Hartkopp4-1259/+2
The PCH CAN driver is a driver for a Bosch C_CAN controller IP core which is attached to the system via PCI. This code has been introduced in 2011 by Oki Semiconductors developers to support the Intel Atom E6xx series I/O Hub (aka EG20T IOH PCH CAN). Since 2012 the driver only has been maintained by the kernel community. As there is a well maintained and continously tested C_CAN/D_CAN driver which also supports the PCI configuration from the PCH CAN EG20T setup this driver became obsolete. Cc: Jacob Kroon <jacob.kroon@gmail.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Dario Binacchi <dariobin@libero.it> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20220924174424.86541-1-socketcan@hartkopp.net Acked-by: Jacob Kroon <jacob.kroon@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-19can: j1939: j1939_session_tx_eoma(): fix debug infoZhang Changzhong1-1/+1
Use "%s" instead of "%p" to print function name in debug info. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/1664520728-4644-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-19can: add termination resistor documentationDaniel S. Trevitz1-0/+33
Add documentation for how to use and setup the switchable termination resistor support for CAN controllers. Signed-off-by: Daniel Trevitz <dan@sstrev.com> Link: https://lore.kernel.org/all/3441354.44csPzL39Z@daniel6430 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-19net: ethernet: adi: adin1110: Fix SPI transfersAlexandru Tachici1-21/+16
No need to use more than one SPI transfer for reads. Use only one from now as ADIN1110/2111 does not tolerate CS changes during reads. The BCM2711/2708 SPI controllers worked fine, but the NXP IMX8MM could not keep CS lowered during SPI bursts. This change aims to make the ADIN1110/2111 driver compatible with both SPI controllers, without any loss of bandwidth/other capabilities. Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19Merge branch 'net-bridge-mc-cleanups'David S. Miller4-15/+10
Ido Schimmel says: ==================== bridge: A few multicast cleanups Clean up a few issues spotted while working on the bridge multicast code and running its selftests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19bridge: mcast: Simplify MDB entry creationIdo Schimmel1-8/+3
Before creating a new MDB entry, br_multicast_new_group() will call br_mdb_ip_get() to see if one exists and return it if so. Therefore, simply call br_multicast_new_group() and omit the call to br_mdb_ip_get(). Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19bridge: mcast: Use spin_lock() instead of spin_lock_bh()Ido Schimmel1-4/+4
IGMPv3 / MLDv2 Membership Reports are only processed from the data path with softIRQ disabled, so there is no need to call spin_lock_bh(). Use spin_lock() instead. This is consistent with how other IGMP / MLD packets are processed. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19selftests: bridge_igmp: Remove unnecessary address deletionIdo Schimmel1-3/+0
The test group address is added and removed in v2reportleave_test(). There is no need to delete it again during cleanup as it results in the following error message: # bash -x ./bridge_igmp.sh [...] + cleanup + pre_cleanup [...] + ip address del dev swp4 239.10.10.10/32 RTNETLINK answers: Cannot assign requested address + h2_destroy Solve by removing the unnecessary address deletion. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19selftests: bridge_vlan_mcast: Delete qdiscs during cleanupIdo Schimmel1-0/+3
The qdiscs are added during setup, but not deleted during cleanup, resulting in the following error messages: # ./bridge_vlan_mcast.sh [...] # ./bridge_vlan_mcast.sh Error: Exclusivity flag on, cannot modify. Error: Exclusivity flag on, cannot modify. Solve by deleting the qdiscs during cleanup. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19Merge branch 'dpaa-phylink'David S. Miller41-1062/+1104
Sean Anderson says: ==================== net: dpaa: Convert to phylink This series converts the DPAA driver to phylink. I have tried to maintain backwards compatibility with existing device trees whereever possible. However, one area where I was unable to achieve this was with QSGMII. Please refer to patch 2 for details. All mac drivers have now been converted. I would greatly appreciate if anyone has T-series or P-series boards they can test/debug this series on. I only have an LS1046ARDB. Everything but QSGMII should work without breakage; QSGMII needs patches 7 and 8. For this reason, the last 4 patches in this series should be applied together (and should not go through separate trees). Changes in v7: - provide phylink_validate_mask_caps() helper - Fix oops if memac_pcs_create returned -EPROBE_DEFER - Fix using pcs-names instead of pcs-handle-names - Fix not checking for -ENODATA when looking for sgmii pcs - Fix 81-character line - Simplify memac_validate with phylink_validate_mask_caps Changes in v6: - Remove unnecessary $ref from renesas,rzn1-a5psw - Remove unnecessary type from pcs-handle-names - Add maxItems to pcs-handle - Fix 81-character line - Fix uninitialized variable in dtsec_mac_config Changes in v5: - Add Lynx PCS binding Changes in v4: - Use pcs-handle-names instead of pcs-names, as discussed - Don't fail if phy support was not compiled in - Split off rate adaptation series - Split off DPAA "preparation" series - Split off Lynx 10G support - t208x: Mark MAC1 and MAC2 as 10G - Add XFI PCS for t208x MAC1/MAC2 Changes in v3: - Expand pcs-handle to an array - Add vendor prefix 'fsl,' to rgmii and mii properties. - Set maxItems for pcs-names - Remove phy-* properties from example because dt-schema complains and I can't be bothered to figure out how to make it work. - Add pcs-handle as a preferred version of pcsphy-handle - Deprecate pcsphy-handle - Remove mii/rmii properties - Put the PCS mdiodev only after we are done with it (since the PCS does not perform a get itself). - Remove _return label from memac_initialization in favor of returning directly - Fix grabbing the default PCS not checking for -ENODATA from of_property_match_string - Set DTSEC_ECNTRL_R100M in dtsec_link_up instead of dtsec_mac_config - Remove rmii/mii properties - Replace 1000Base... with 1000BASE... to match IEEE capitalization - Add compatibles for QSGMII PCSs - Split arm and powerpcs dts updates Changes in v2: - Better document how we select which PCS to use in the default case - Move PCS_LYNX dependency to fman Kconfig - Remove unused variable slow_10g_if - Restrict valid link modes based on the phy interface. This is easier to set up, and mostly captures what I intended to do the first time. We now have a custom validate which restricts half-duplex for some SoCs for RGMII, but generally just uses the default phylink validate. - Configure the SerDes in enable/disable - Properly implement all ethtool ops and ioctls. These were mostly stubbed out just enough to compile last time. - Convert 10GEC and dTSEC as well - Fix capitalization of mEMAC in commit messages - Add nodes for QSGMII PCSs - Add nodes for QSGMII PCSs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19arm64: dts: layerscape: Add nodes for QSGMII PCSsSean Anderson2-0/+49
Now that we actually read registers from QSGMII PCSs, it's important that we have the correct address (instead of hoping that we're the MAC with all the QSGMII PCSs on its bus). This adds nodes for the QSGMII PCSs. The exact mapping of QSGMII to MACs depends on the SoC. Since the first QSGMII PCSs share an address with the SGMII and XFI PCSs, we only add new nodes for PCSs 2-4. This avoids address conflicts on the bus. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19powerpc: dts: qoriq: Add nodes for QSGMII PCSsSean Anderson20-20/+131
Now that we actually read registers from QSGMII PCSs, it's important that we have the correct address (instead of hoping that we're the MAC with all the QSGMII PCSs on its bus). This adds nodes for the QSGMII PCSs. They have the same addresses on all SoCs (e.g. if QSGMIIA is present it's used for MACs 1 through 4). Since the first QSGMII PCSs share an address with the SGMII and XFI PCSs, we only add new nodes for PCSs 2-4. This avoids address conflicts on the bus. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19powerpc: dts: t208x: Mark MAC1 and MAC2 as 10GSean Anderson3-2/+90
On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC dtsi fragments, and mark the QMAN ports as 10G. Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19net: dpaa: Convert to phylinkSean Anderson10-909/+612
This converts DPAA to phylink. All macs are converted. This should work with no device tree modifications (including those made in this series), except for QSGMII (as noted previously). The mEMAC configuration is one of the tricker areas. I have tried to capture all the restrictions across the various models. Most of the time, we assume that if the serdes supports a mode or the phy-interface-mode specifies it, then we support it. The only place we can't do this is (RG)MII, since there's no serdes. In that case, we rely on a (new) devicetree property. There are also several cases where half-duplex is broken. Unfortunately, only a single compatible is used for the MAC, so we have to use the board compatible instead. The 10GEC conversion is very straightforward, since it only supports XAUI. There is generally nothing to configure. The dTSEC conversion is broadly similar to mEMAC, but is simpler because we don't support configuring the SerDes (though this can be easily added) and we don't have multiple PCSs. From what I can tell, there's nothing different in the driver or documentation between SGMII and 1000BASE-X except for the advertising. Similarly, I couldn't find anything about 2500BASE-X. In both cases, I treat them like SGMII. These modes aren't used by any in-tree boards. Similarly, despite being mentioned in the driver, I couldn't find any documented SoCs which supported QSGMII. I have left it unimplemented for now. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19net: fman: memac: Use lynx pcs driverSean Anderson2-156/+105
Although not stated in the datasheet, as far as I can tell PCS for mEMACs is a "Lynx." By reusing the existing driver, we can remove the PCS management code from the memac driver. This requires calling some PCS functions manually which phylink would usually do for us, but we will let it do that soon. One problem is that we don't actually have a PCS for QSGMII. We pretend that each mEMAC's MDIO bus has four QSGMII PCSs, but this is not the case. Only the "base" mEMAC's MDIO bus has the four QSGMII PCSs. This is not an issue yet, because we never get the PCS state. However, it will be once the conversion to phylink is complete, since the links will appear to never come up. To get around this, we allow specifying multiple PCSs in pcsphy. This breaks backwards compatibility with old device trees, but only for QSGMII. IMO this is the only reasonable way to figure out what the actual QSGMII PCS is. Additionally, we now also support a separate XFI PCS. This can allow the SerDes driver to set different addresses for the SGMII and XFI PCSs so they can be accessed at the same time. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19net: fman: memac: Add serdes supportSean Anderson1-2/+47
This adds support for using a serdes which has to be configured. This is primarly in preparation for phylink conversion, which will then change the serdes mode dynamically. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19net: phylink: provide phylink_validate_mask_caps() helperRussell King (Oracle)2-12/+32
Provide a helper that restricts the link modes according to the phylink capabilities. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [rebased on net-next/master and added documentation] Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19dt-bindings: net: fman: Add additional interface propertiesSean Anderson2-15/+43
At the moment, mEMACs are configured almost completely based on the phy-connection-type. That is, if the phy interface is RGMII, it assumed that RGMII is supported. For some interfaces, it is assumed that the RCW/bootloader has set up the SerDes properly. This is generally OK, but restricts runtime reconfiguration. The actual link state is never reported. To address these shortcomings, the driver will need additional information. First, it needs to know how to access the PCS/PMAs (in order to configure them and get the link status). The SGMII PCS/PMA is the only currently-described PCS/PMA. Add the XFI and QSGMII PCS/PMAs as well. The XFI (and 10GBASE-KR) PCS/PMA is a c45 "phy" which sits on the same MDIO bus as SGMII PCS/PMA. By default they will have conflicting addresses, but they are also not enabled at the same time by default. Therefore, we can let the XFI PCS/PMA be the default when phy-connection-type is xgmii. This will allow for backwards-compatibility. QSGMII, however, cannot work with the current binding. This is because the QSGMII PCS/PMAs are only present on one MAC's MDIO bus. At the moment this is worked around by having every MAC write to the PCS/PMA addresses (without checking if they are present). This only works if each MAC has the same configuration, and only if we don't need to know the status. Because the QSGMII PCS/PMA will typically be located on a different MDIO bus than the MAC's SGMII PCS/PMA, there is no fallback for the QSGMII PCS/PMA. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19dt-bindings: net: Add Lynx PCS bindingSean Anderson1-0/+40
This binding is fairly bare-bones for now, since the Lynx driver doesn't parse any properties (or match based on the compatible). We just need it in order to prevent the PCS nodes from having phy devices attached to them. This is not really a problem, but it is a bit inefficient. This binding is really for three separate PCSs (SGMII, QSGMII, and XFI). However, the driver treats all of them the same. This works because the SGMII and XFI devices typically use the same address, and the SerDes driver (or RCW) muxes between them. The QSGMII PCSs have the same register layout as the SGMII PCSs. To do things properly, we'd probably do something like ethernet-pcs@0 { #pcs-cells = <1>; compatible = "fsl,lynx-pcs"; reg = <0>, <1>, <2>, <3>; }; but that would add complexity, and we can describe the hardware just fine using separate PCSs for now. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19dt-bindings: net: Expand pcs-handle to an arraySean Anderson3-3/+12
This allows multiple phandles to be specified for pcs-handle, such as when multiple PCSs are present for a single MAC. To differentiate between them, also add a pcs-handle-names property. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19Merge branch 'net-marvell-yaml'David S. Miller5-152/+325
Michał Grzelak says: ==================== net: further improvements to marvell,pp2.yaml This patchset addresses problems with reg ranges and additional $refs. It also limits phy-mode and aligns examples. Best regards, Michał --- Changelog: v4->v5 - drop '+' from all patternProperties - restrict range of patternProperties to [0-2] in top level - drop the $ref in patternProperties:'^...':properties:reg - add patternProperties:'^...':properties:reg:maximum:2 - drop $ref in patternProperties:'^...':properties:phys - add patternProperties:'^...':properties:phys:maxItems:1 - limit phy-mode to the subset found in dts files - reflect the order of subnodes' properties in subnodes' required: - restrict range of pattern to [0-2] in marvell,armada-7k-pp22 case - restrict range of pattern to [0-1] in marvell,armada-375-pp2 case - align to 4 spaces all examples: - add specified maximum to allOf:if:then-else:properties:reg v3->v4 - change commit message of first patch - move allOf:$ref to patternProperties:'^...':$ref - deprecate port-id in favour of reg - move reg to front of properties list in patternProperties - reflect the order of properties in required list in patternProperties - add unevaluatedProperties: false to patternProperties - change unevaluated- to additionalProperties at top level - add property phys: to ports subnode - extend example binding with additional information about phys and sfp - hook phys property to phy-consumer.yaml schema v2->v3 - move 'reg:description' to 'allOf:if:then' - change '#size-cells: true' and '#address-cells: true' to '#size-cells: const: 0' and '#address-cells: const: 1' - replace all occurences of pattern "^eth\{hex_num}*" with "^(ethernet-)?port@[0-9]+$" - add description in 'patternProperties:^...' - add 'patternProperties:^...:interrupt-names:minItems: 1' - add 'patternProperties:^...:reg:description' - update 'patternProperties:^...:port-id:description' - add 'patternProperties:^...:required: - reg' - update '*:description:' to uppercase - add 'allOf:then:required:marvell,system-controller' - skip quotation marks from 'allOf:$ref' - add 'else' schema to match 'allOf:if:then' - restrict 'clocks' in 'allOf:if:then' - restrict 'clock-names' in 'allOf:if:then' - add #address-cells=<1>; #size-cells=<0>; in 'examples:' - change every "ethX" to "ethernet-port@X" in 'examples:' - add "reg" and comment in all ports in 'examples:' - change /ethernet/eth0/phy-mode in examples://Armada-375 to "rgmii-id" - replace each cpm_ with cp0_ in 'examples:' - replace each _syscon0 with _clk0 in 'examples:' - remove each eth0X label in 'examples:' - update armada-375.dtsi and armada-cp11x.dtsi to match marvell,pp2.yaml v1->v2 - move 'properties' to the front of the file - remove blank line after 'properties' - move 'compatible' to the front of 'properties' - move 'clocks', 'clock-names' and 'reg' definitions to 'properties' - substitute all occurences of 'marvell,armada-7k-pp2' with 'marvell,armada-7k-pp22' - add properties:#size-cells and properties:#address-cells - specify list in 'interrupt-names' - remove blank lines after 'patternProperties' - remove '^interrupt' and '^#.*-cells$' patterns - remove blank line after 'allOf' - remove first 'if-then-else' block from 'allOf' - negate the condition in allOf:if schema - delete 'interrupt-controller' from section 'examples' - delete '#interrupt-cells' from section 'examples' ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19ARM: dts: armada-375: Update network description to match schemaMarcin Wojtas1-4/+8
Update the PP2 ethernet ports subnodes' names to match schema enforced by the marvell,pp2.yaml contents. Add new required properties ('reg') which contains information about the port ID, keeping 'port-id' ones for backward compatibility. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19arm64: dts: marvell: Update network description to match schemaMarcin Wojtas1-6/+11
Update the PP2 ethernet ports subnodes' names to match schema enforced by the marvell,pp2.yaml contents. Add new required properties ('reg') which contains information about the port ID, keeping 'port-id' ones for backward compatibility. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19dt-bindings: net: marvell,pp2: convert to json-schemaMichał Grzelak3-142/+306
Convert the marvell,pp2 bindings from text to proper schema. Move 'marvell,system-controller' and 'dma-coherent' properties from port up to the controller node, to match what is actually done in DT. Rename all subnodes to match "^(ethernet-)?port@[0-2]$" and deprecate port-id in favour of 'reg'. Signed-off-by: Michał Grzelak <mig@semihalf.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19enic: define constants for legacy interrupts offsetGovindarajulu Varadarajan2-23/+11
Use macro instead of function calls. These values are constant and will not change. Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com> Link: https://lore.kernel.org/r/20221018005804.188643-1-govind.varadar@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-19net: fec: remove the unused functionsShenwei Wang1-57/+0
Removed those unused functions since we simplified the driver by using the page pool to manage RX buffers. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20221017161236.1563975-1-shenwei.wang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 20:37:14 +0300