| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
This patch fixes two cases in qla_target.c code where the
schedule_delayed_work() value was being incorrectly calculated
from sess->expires - jiffies.
Signed-off-by: Shivaram U <shivaram.u@quadstor.com>
Cc: <stable@vger.kernel.org> #3.6+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
'regulator/fix/pfuze100' into regulator-linus
|
|
This reverts commit 99023e90fe5c147ea0665bda86764ea44f08a622.
Accidently checked this into 'net' instead of 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removed the shared ei_debug variable. Replaced it by adding u32 msg_enable to
the private struct ei_device. Now each 8390 ethernet instance has a per-device
logging variable.
Changed older style printk() calls to more canonical forms.
Tested on: ne, ne2k-pci, smc-ultra, and wd hardware.
V4.0
- Substituted pr_info() and pr_debug() for printk() KERN_INFO and KERN_DEBUG
V3.0
- Checked for cases where pr_cont() was most appropriate choice.
- Changed module parameter from 'debug' to 'msg_enable' because debug was
no longer the best description.
V2.0
- Changed netif_msg_(drv|probe|ifdown|rx_err|tx_err|tx_queued|intr|rx_status|hw)
to netif_(dbg|info|warn|err) where possible.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_partial_csum_set requires that the linear area of the skb covers the
checksum field. The checksum setup code in netback was only doing that
pullup in the case when the pseudo header checksum was being recalculated
though. This patch makes that pullup unconditional. (I pullup the whole
transport header just for simplicity; the requirement is only for the check
field but in the case of UDP this is the last field in the header and in the
case of TCP it's the last but one).
The lack of pullup manifested as failures running Microsoft HCK network
tests on a pair of Windows 8 VMs and it has been verified that this patch
fixes the problem.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some I2C bus drivers do not allow zero-length data transfers which are
required to start a measurement with the HIH6130/1 sensor. Nevertheless,
we can overcome this limitation by writing a zero dummy byte. This byte
is ignored by the sensor and was verified to be working with the OMAP
I2C bus driver in a BeagleBone board.
Signed-off-by: José Miguel Gonçalves <jose.goncalves@inov.pt>
[Guenter Roeck: Simplified complexity of write_length initialization]
Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Commit 89ce376c6bdc (drivers/net: Use of_match_ptr() macro in smc91x.c)
added minimal device tree support to smc91x, but it's not working on
many platforms because of the lack of some key configuration bits.
Fix the issue by parsing the necessary configuration like the
smc911x driver is doing. As most smc91x users seem to use 16-bit
access, let's default to that if no reg-io-width is specified.
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: netdev@vger.kernel.org
Cc: devicetree@vger.kernel.org
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pskb_may_pull() can reallocate skb->head, we need to move the
initialization of iph and uh pointers after its call.
Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shawn Bohrer <sbohrer@rgmadvisors.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
macvtap_put_user() never return a value grater than iov length, this in fact
bypasses the truncated checking in macvtap_recvmsg(). Fix this by always
returning the size of packet plus the possible vlan header to let the trunca
checking work.
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 6680ec68eff47d36f67b4351bc9836fd6cba9532
(tuntap: hardware vlan tx support) breaks the truncated packet signal by nev
return a length greater than iov length in tun_put_user(). This patch fixes
by always return the length of packet plus possible vlan header. Caller can
detect the truncated packet by comparing the return value and the size of io
length.
Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now, 32bit rates may be not the true rate.
So use rate_bytes_ps which is from
max(rate32, rate64) to calcualte quantum.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current max_size is caluated from rate table. Now, the rate table
has been replaced and it's wrong to caculate max_size based on this
rate table. It can lead wrong calculation of max_size.
The burst in kernel may be lower than user asked, because burst may gets
some loss when transform it to buffer(E.g. "burst 40kb rate 30mbit/s")
and it seems we cannot avoid this loss. Burst's value(max_size) based on
rate table may be equal user asked. If a packet's length is max_size, this
packet will be stalled in tbf_dequeue() because its length is above the
burst in kernel so that it cannot get enough tokens. The max_size guards
against enqueuing packet sizes above q->buffer "time" in tbf_enqueue().
To make consistent with the calculation of tokens, this patch add a helper
psched_ns_t2l() to calculate burst(max_size) directly to fix this problem.
After this fix, we can support to using 64bit rates to calculate burst as well.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch changes special case handling for ISCSI_OP_SCSI_CMD
where an initiator sends a zero length Expected Data Transfer
Length (EDTL), but still sets the WRITE and/or READ flag bits
when no payload transfer is requested.
Many, many moons ago two special cases where added for an ancient
version of ESX that has long since been fixed, so instead of adding
a new special case for the reported bug with a Broadcom 57800 NIC,
go ahead and always strip off the incorrect WRITE + READ flag bits.
Also, avoid sending a reject here, as RFC-3720 does mandate this
case be handled without protocol error.
Reported-by: Witold Bazakbal <865perl@wp.pl>
Tested-by: Witold Bazakbal <865perl@wp.pl>
Cc: <stable@vger.kernel.org> #3.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Commit 04f3b31bff72 ("iscsi-target: Convert iscsi_session statistics to
atomic_long_t") removed the updating of these fields in iscsi (the only
fabric driver that ever touched these counters), and the core has no way
to report or otherwise use the values. Remove the last remnants of
these counters.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
The iSCSI CHAP auth parameters are already copied with respect for
the destination buffer size. Return -EINVAL instead of silently
truncating the input.
Signed-off-by: Eric Seppanen <eric@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Renesas R-Car development boards use KSZ8041RNLI PHY which for some reason has
ID of 0x00221537 that is not documented for KSZ8041-family PHYs and does not
match the documented ID of 0x0022151x (where 'x' is the revision). We have
to add the new #define PHY_ID_* and new ksphy_driver[] entry, almost the same
as KSZ8041 one, differing only in the 'phy_id' and 'name' fields.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:
====================
Just one patch this time -- a fix from Felix Fietkau to fix the
duration calculation for non-aggregated packets in ath9k. This is
a small change and it is obviously specific to ath9k.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add entries for PCI host controller drivers in drivers/pci/host/.
Signed-off-by: Mohit Kumar <mohit.kumar@st.com> # DESIGNWARE
Signed-off-by: Pratyush Anand <pratyush.anand@st.com> # DESIGNWARE
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au> # R-CAR
Double-Plus-Acked-by: Jason Cooper <jason@lakedaemon.net> # MVEBU
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Richard Zhu <r65037@freescale.com> # IMX6
|
|
These mappings are in fact special and require special handling in privcmd,
which already exists. Failure to mark the PTE as special on arm64 causes all
sorts of bad PTE fun. e.g.
e.g.:
BUG: Bad page map in process xl pte:e0004077b33f53 pmd:4079575003
page:ffffffbce1a2f328 count:1 mapcount:-1 mapping: (null) index:0x0
page flags: 0x4000000000000014(referenced|dirty)
addr:0000007fb5259000 vm_flags:040644fa anon_vma: (null) mapping:ffffffc03a6fda58 index:0
vma->vm_ops->fault: privcmd_fault+0x0/0x38
vma->vm_file->f_op->mmap: privcmd_mmap+0x0/0x2c
CPU: 0 PID: 2657 Comm: xl Not tainted 3.12.0+ #102
Call trace:
[<ffffffc0000880f8>] dump_backtrace+0x0/0x12c
[<ffffffc000088238>] show_stack+0x14/0x1c
[<ffffffc0004b67e0>] dump_stack+0x70/0x90
[<ffffffc000125690>] print_bad_pte+0x12c/0x1bc
[<ffffffc0001268f4>] unmap_single_vma+0x4cc/0x700
[<ffffffc0001273b4>] unmap_vmas+0x68/0xb4
[<ffffffc00012c050>] unmap_region+0xcc/0x1d4
[<ffffffc00012df20>] do_munmap+0x218/0x314
[<ffffffc00012e060>] vm_munmap+0x44/0x64
[<ffffffc00012ed78>] SyS_munmap+0x24/0x34
Where unmap_single_vma contains inlined -> unmap_page_range -> zap_pud_range
-> zap_pmd_range -> zap_pte_range -> print_bad_pte.
Or:
BUG: Bad page state in process xl pfn:4077b4d
page:ffffffbce1a2f8d8 count:0 mapcount:-1 mapping: (null) index:0x0
page flags: 0x4000000000000014(referenced|dirty)
Modules linked in:
CPU: 0 PID: 2657 Comm: xl Tainted: G B 3.12.0+ #102
Call trace:
[<ffffffc0000880f8>] dump_backtrace+0x0/0x12c
[<ffffffc000088238>] show_stack+0x14/0x1c
[<ffffffc0004b67e0>] dump_stack+0x70/0x90
[<ffffffc00010f798>] bad_page+0xc4/0x110
[<ffffffc00010f8b4>] free_pages_prepare+0xd0/0xd8
[<ffffffc000110e94>] free_hot_cold_page+0x28/0x178
[<ffffffc000111460>] free_hot_cold_page_list+0x38/0x60
[<ffffffc000114cf0>] release_pages+0x190/0x1dc
[<ffffffc00012c0e0>] unmap_region+0x15c/0x1d4
[<ffffffc00012df20>] do_munmap+0x218/0x314
[<ffffffc00012e060>] vm_munmap+0x44/0x64
[<ffffffc00012ed78>] SyS_munmap+0x24/0x34
x86 already gets this correct. 32-bit arm gets away with this because there is
not PTE_SPECIAL bit in the PTE there and the vm_normal_page fallback path does
the right thing.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
|
|
On arm64 the dma_map_ops implementation is based on the swiotlb.
swiotlb-xen, used by default in dom0 on Xen, is also based on the
swiotlb.
Avoid calling into the default arm64 dma_map_ops functions from
xen_dma_map_page, xen_dma_unmap_page, xen_dma_sync_single_for_cpu, and
xen_dma_sync_single_for_device otherwise we end up calling into the
swiotlb twice.
When arm64 gets a non-swiotlb based implementation of dma_map_ops, we'll
probably have to reintroduce dma_map_ops calls in page-coherent.h.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: catalin.marinas@arm.com
CC: Will.Deacon@arm.com
CC: Ian.Campbell@citrix.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
|
|
Christian suffers from a bad BIOS that wrecks his i5's TSC sync. This
results in him occasionally seeing time going backwards - which
crashes the scheduler ...
Most of our time accounting can actually handle that except the most
common one; the tick time update of sched_fair.
There is a further problem with that code; previously we assumed that
because we get a tick every TICK_NSEC our time delta could never
exceed 32bits and math was simpler.
However, ever since Frederic managed to get NO_HZ_FULL merged; this is
no longer the case since now a task can run for a long time indeed
without getting a tick. It only takes about ~4.2 seconds to overflow
our u32 in nanoseconds.
This means we not only need to better deal with time going backwards;
but also means we need to be able to deal with large deltas.
This patch reworks the entire code and uses mul_u64_u32_shr() as
proposed by Andy a long while ago.
We express our virtual time scale factor in a u32 multiplier and shift
right and the 32bit mul_u64_u32_shr() implementation reduces to a
single 32x32->64 multiply if the time delta is still short (common
case).
For 64bit a 64x64->128 multiply can be used if ARCH_SUPPORTS_INT128.
Reported-and-Tested-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: fweisbec@gmail.com
Cc: Paul Turner <pjt@google.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131118172706.GI3866@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Introduce mul_u64_u32_shr() as proposed by Andy a while back; it
allows using 64x64->128 muls on 64bit archs and recent GCC
which defines __SIZEOF_INT128__ and __int128.
(This new method will be used by the scheduler.)
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: fweisbec@gmail.com
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-hxjoeuzmrcaumR0uZwjpe2pv@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
While hunting a preemption issue with Alexander, Ben noticed that the
currently generic PREEMPT_NEED_RESCHED stuff is horribly broken for
load-store architectures.
We currently rely on the IPI to fold TIF_NEED_RESCHED into
PREEMPT_NEED_RESCHED, but when this IPI lands while we already have
a load for the preempt-count but before the store, the store will erase
the PREEMPT_NEED_RESCHED change.
The current preempt-count only works on load-store archs because
interrupts are assumed to be completely balanced wrt their preempt_count
fiddling; the previous preempt_count load will match the preempt_count
state after the interrupt and therefore nothing gets lost.
This patch removes the PREEMPT_NEED_RESCHED usage from generic code and
pushes it into x86 arch code; the generic code goes back to relying on
TIF_NEED_RESCHED.
Boot tested on x86_64 and compile tested on ppc64.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-and-Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131128132641.GP10022@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Yinghai reported that he saw a /0 in sg_capacity on his EX parts.
Make sure to always initialize power_orig now that we actually use it.
Ideally build_sched_domains() -> init_sched_groups_power() would also
initialize this; but for some yet unexplained reason some setups seem
to miss updates there.
Reported-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-l8ng2m9uml6fhibln8wqpom7@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The update is horribly racy since it doesn't protect at all against
concurrent closing of the master fd. And it can't really since that
requires us to grab a mutex.
Instead of jumping through hoops and offloading this to a worker
thread just block this bit of code for the modesetting driver.
Note that the race is fairly easy to hit since we call the breadcrumb
function for any interrupt. So the vblank interrupt (which usually
keeps going for a bit) is enough. But even if we'd block this and only
update the breadcrumb for user interrupts from the CS we could hit
this race with kms/gem userspace: If a non-master is waiting somewhere
(and hence has interrupts enabled) and the master closes its fd
(probably due to crashing).
v2: Add a code comment to explain why fixing this for real isn't
really worth it. Also improve the commit message a bit.
v3: Fix the spelling in the comment.
Reported-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru>
Cc: Eugene Shatokhin <eugene.shatokhin@rosalab.ru>
Cc: stable@vger.kernel.org
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Fix a crash in synproxy_send_tcp() when using the SYNPROXY target in the
PREROUTING chain caused by missing routing information.
Reported-by: Nicki P. <xastx@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
As pointed out by the kbuild test robot, and Ian Abbott, the dma >= 0 test
is always true because dma is unsigned. This generates a warn message:
drivers/staging/comedi/drivers/ni_at_a2150.c:715 a2150_attach()
warn: always true condition '(dma >= 0) => (0-u32max >= 0)'
Fix the test as suggested by Ian Abbott.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver was forced to "module only" following a previous failure to build
into the kernel. The problem was resolved several months ago.
This has been successfully tested with "make allyesconfig" on x86_64.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bScanning
byBBPreEDIndex value is initially 0, this means that from
cold BBvUpdatePreEDThreshold is never set.
This means that sensitivity may be in an ambiguous state,
failing to scan any wireless points or at least distant ones.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change s_vSaveTxPktInfo and BSSvUpdateNodeTxCounter to use vnt_tx_pkt_info
relayed to BSSvUpdateNodeTxCounter via INTnsProcessData.
pStatistic->abyTxPktInfo[byPktNum].byBroadMultiUni is unused and discarded.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use netstats rx_packets and rx_frame_errors.
Add frame errors to RXbBulkInProcessData
The current scStatistic.RxFcsErrCnt only records
USB errors not frame errors.
The scStatistic.RxOkCnt only recorded successful USB
transfers not actual successfully received packets.
So a more accurate reading is to use netstats rx_packets and
rx_frame_errors.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Calculate the qual from the tx_packets and wstats.discard.retries and
apply to wstats.qual.qual
Discard pDevice->scStatistic.LinkQuality.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Apply directly to net_device_stats and wireless stats.
tx_bytes are relayed from s_vSaveTxPktInfo via scStatistic,
so collect them there.
All other statistics in STAvUpdateTDStatCounter are dead code
and don't reach user.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
AD1986A codec is a pretty old codec and has really many hidden
restrictions. One of such is that each DAC is dedicated to certain
pin although there are possible connections. Currently, the generic
parser tries to assign individual DACs as much as possible, and this
lead to two bad situations: connections where the sound actually
doesn't work, and connections conflicting other channels.
We may fix this by trying to find the best connections more harder,
but as of now, it's easier to give some hints for paired DAC/pin
connections and honor them if available, since such a hint is needed
only for specific codecs (right now only AD1986A, and there will be
unlikely any others in future).
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64971
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66621
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
On the Dell machines with codec whose Subsystem Id is 0x10280624,
no external microphone can be detected when plugging a 3-ring
headset. If we add "model=dell-headset-multi" for the
snd-hda-intel.ko, the problem will disappear.
BugLink: https://bugs.launchpad.net/bugs/1259790
Cc: David Henningsson <david.henningsson@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In case a single HDA card has both HDMI and S/PDIF outputs, the S/PDIF
outputs will have their IEC958 controls created starting from index 16
and the HDMI controls will be created starting from index 0.
However, HDMI simple_playback_build_controls() as used by old VIA and
NVIDIA codecs incorrectly requests the IEC958 controls to be created
with an S/PDIF type instead of HDMI.
In case the card has other codecs that have HDMI outputs, the controls
will be created with wrong index=16, causing them to e.g. be unreachable
by the ALSA "hdmi" alias.
Fix that by making simple_playback_build_controls() request controls
with HDMI indexes.
Not many cards have an affected configuration, but e.g. ASUS M3N78-VM
contains an integrated NVIDIA HDA "card" with:
- a VIA codec that has, among others, an S/PDIF pin incorrectly
labelled as an HDMI pin, and
- an NVIDIA MCP7x HDMI codec.
Reported-by: MysterX on #openelec
Tested-by: MysterX on #openelec
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Cc: <stable@vger.kernel.org> # 3.8+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Dave Jones reported a use after free in UDP stack :
[ 5059.434216] =========================
[ 5059.434314] [ BUG: held lock freed! ]
[ 5059.434420] 3.13.0-rc3+ #9 Not tainted
[ 5059.434520] -------------------------
[ 5059.434620] named/863 is freeing memory ffff88005e960000-ffff88005e96061f, with a lock still held there!
[ 5059.434815] (slock-AF_INET){+.-...}, at: [<ffffffff8149bd21>] udp_queue_rcv_skb+0xd1/0x4b0
[ 5059.435012] 3 locks held by named/863:
[ 5059.435086] #0: (rcu_read_lock){.+.+..}, at: [<ffffffff8143054d>] __netif_receive_skb_core+0x11d/0x940
[ 5059.435295] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff81467a5e>] ip_local_deliver_finish+0x3e/0x410
[ 5059.435500] #2: (slock-AF_INET){+.-...}, at: [<ffffffff8149bd21>] udp_queue_rcv_skb+0xd1/0x4b0
[ 5059.435734]
stack backtrace:
[ 5059.435858] CPU: 0 PID: 863 Comm: named Not tainted 3.13.0-rc3+ #9 [loadavg: 0.21 0.06 0.06 1/115 1365]
[ 5059.436052] Hardware name: /D510MO, BIOS MOPNV10J.86A.0175.2010.0308.0620 03/08/2010
[ 5059.436223] 0000000000000002 ffff88007e203ad8 ffffffff8153a372 ffff8800677130e0
[ 5059.436390] ffff88007e203b10 ffffffff8108cafa ffff88005e960000 ffff88007b00cfc0
[ 5059.436554] ffffea00017a5800 ffffffff8141c490 0000000000000246 ffff88007e203b48
[ 5059.436718] Call Trace:
[ 5059.436769] <IRQ> [<ffffffff8153a372>] dump_stack+0x4d/0x66
[ 5059.436904] [<ffffffff8108cafa>] debug_check_no_locks_freed+0x15a/0x160
[ 5059.437037] [<ffffffff8141c490>] ? __sk_free+0x110/0x230
[ 5059.437147] [<ffffffff8112da2a>] kmem_cache_free+0x6a/0x150
[ 5059.437260] [<ffffffff8141c490>] __sk_free+0x110/0x230
[ 5059.437364] [<ffffffff8141c5c9>] sk_free+0x19/0x20
[ 5059.437463] [<ffffffff8141cb25>] sock_edemux+0x25/0x40
[ 5059.437567] [<ffffffff8141c181>] sock_queue_rcv_skb+0x81/0x280
[ 5059.437685] [<ffffffff8149bd21>] ? udp_queue_rcv_skb+0xd1/0x4b0
[ 5059.437805] [<ffffffff81499c82>] __udp_queue_rcv_skb+0x42/0x240
[ 5059.437925] [<ffffffff81541d25>] ? _raw_spin_lock+0x65/0x70
[ 5059.438038] [<ffffffff8149bebb>] udp_queue_rcv_skb+0x26b/0x4b0
[ 5059.438155] [<ffffffff8149c712>] __udp4_lib_rcv+0x152/0xb00
[ 5059.438269] [<ffffffff8149d7f5>] udp_rcv+0x15/0x20
[ 5059.438367] [<ffffffff81467b2f>] ip_local_deliver_finish+0x10f/0x410
[ 5059.438492] [<ffffffff81467a5e>] ? ip_local_deliver_finish+0x3e/0x410
[ 5059.438621] [<ffffffff81468653>] ip_local_deliver+0x43/0x80
[ 5059.438733] [<ffffffff81467f70>] ip_rcv_finish+0x140/0x5a0
[ 5059.438843] [<ffffffff81468926>] ip_rcv+0x296/0x3f0
[ 5059.438945] [<ffffffff81430b72>] __netif_receive_skb_core+0x742/0x940
[ 5059.439074] [<ffffffff8143054d>] ? __netif_receive_skb_core+0x11d/0x940
[ 5059.442231] [<ffffffff8108c81d>] ? trace_hardirqs_on+0xd/0x10
[ 5059.442231] [<ffffffff81430d83>] __netif_receive_skb+0x13/0x60
[ 5059.442231] [<ffffffff81431c1e>] netif_receive_skb+0x1e/0x1f0
[ 5059.442231] [<ffffffff814334e0>] napi_gro_receive+0x70/0xa0
[ 5059.442231] [<ffffffffa01de426>] rtl8169_poll+0x166/0x700 [r8169]
[ 5059.442231] [<ffffffff81432bc9>] net_rx_action+0x129/0x1e0
[ 5059.442231] [<ffffffff810478cd>] __do_softirq+0xed/0x240
[ 5059.442231] [<ffffffff81047e25>] irq_exit+0x125/0x140
[ 5059.442231] [<ffffffff81004241>] do_IRQ+0x51/0xc0
[ 5059.442231] [<ffffffff81542bef>] common_interrupt+0x6f/0x6f
We need to keep a reference on the socket, by using skb_steal_sock()
at the right place.
Note that another patch is needed to fix a race in
udp_sk_rx_dst_set(), as we hold no lock protecting the dst.
Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux")
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shawn Bohrer <sbohrer@rgmadvisors.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Wang Weidong says:
====================
sctp: check the rto_min and rto_max
v6 -> v7:
-patch2: fix the whitespace issues which pointed out by Daniel
v5 -> v6:
split the v5' first patch to patch1 and patch2, and remove the
macro in constants.h
-patch1: do rto_min/max socket option handling in its own patch, and
fix the check of rto_min/max.
-patch2: do rto_min/max sysctl handling in its own patch.
-patch3: add Suggested-by Daniel.
v4 -> v5:
- patch1: add marco in constants.h and fix up spacing as
suggested by Daniel
- patch2: add a patch for fix up do_hmac_alg for according
to do_rto_min[max]
v3 -> v4:
-patch1: fix use init_net directly which suggested by Vlad.
v2 -> v3:
-patch1: add proc_handler for check rto_min and rto_max which suggested
by Vlad
v1 -> v2:
-patch1: fix the From Name which pointed out by David, and
add the ACK by Neil
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
