summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-11-04ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S' and ↵Frieder Schrempf2-0/+32
'N6411 S' The 'N6311 S' and the 'N6411 S' are similar to the Kontron 'N6310 S' evaluation kit boards. Instead of the N6310 SoM, they feature a N6311 or N6411 SoM. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate fileFrieder Schrempf2-400/+411
The baseboard for the Kontron N6310 SoM is also used for other SoMs such as N6311 and N6411. In order to share the code, we move the definitions of the baseboard to a separate dtsi file. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx6ul-kontron-n6310-s: Disable the snvs-poweroff driverFrieder Schrempf1-4/+0
The snvs-poweroff driver can power off the system by pulling the PMIC_ON_REQ signal low, to let the PMIC disable the power. The Kontron SoMs do not have this signal connected, so let's remove the node. This fixes a real issue when the signal is asserted at poweroff, but not actually causing the power to turn off. It was observed, that in this case the system would not shut down properly. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: Add support for two more Kontron SoMs N6311 and N6411Frieder Schrempf2-0/+80
The N6311 and the N6411 SoM are similar to the Kontron N6310 SoM. They are pin-compatible, but feature a larger RAM and NAND flash (512MiB instead of 256MiB). Further, the N6411 has an i.MX6ULL SoC, instead of an i.MX6UL. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate fileFrieder Schrempf2-94/+104
The Kontron N6311 and N6411 SoMs are very similar to N6310. In preparation to add support for them, we move the common nodes to a separate file imx6ul-kontron-n6x1x-som-common.dtsi. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx7ulp-evk: Use APLL_PFD1 as usdhc's clock sourceAnson Huang1-1/+1
i.MX7ULP does NOT support runtime switching clock source for PCC, APLL_PFD1 by default is usdhc's clock source, so just use it in kernel to avoid below kernel dump during kernel boot up and make sure kernel can boot up with SD root file-system. [ 3.035892] Loading compiled-in X.509 certificates [ 3.136301] sdhci-esdhc-imx 40370000.mmc: Got CD GPIO [ 3.242886] mmc0: Reset 0x1 never completed. [ 3.247190] mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== [ 3.253751] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00000002 [ 3.260218] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001 [ 3.266775] mmc0: sdhci: Argument: 0x00009a64 | Trn mode: 0x00000000 [ 3.273333] mmc0: sdhci: Present: 0x00088088 | Host ctl: 0x00000002 [ 3.279794] mmc0: sdhci: Power: 0x00000000 | Blk gap: 0x00000080 [ 3.286350] mmc0: sdhci: Wake-up: 0x00000008 | Clock: 0x0000007f [ 3.292901] mmc0: sdhci: Timeout: 0x0000008c | Int stat: 0x00000000 [ 3.299364] mmc0: sdhci: Int enab: 0x007f010b | Sig enab: 0x00000000 [ 3.305918] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00008402 [ 3.312471] mmc0: sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000b400 [ 3.318934] mmc0: sdhci: Cmd: 0x0000113a | Max curr: 0x00ffffff [ 3.325488] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x0039b37f [ 3.332040] mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00400e00 [ 3.338501] mmc0: sdhci: Host ctl2: 0x00000000 [ 3.343051] mmc0: sdhci: ============================================ Fixes: 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: imx: add devicetree for Kobo Clara HDAndreas Kemnade2-1/+326
This adds a devicetree for the Kobo Clara HD Ebook reader. It is on based on boards called "e60k02". It is equipped with an imx6sll SoC. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: add Netronix E60K02 board common fileAndreas Kemnade1-0/+306
The Netronix board E60K02 can be found some several Ebook-Readers, at least the Kobo Clara HD and the Tolino Shine 3. The board is equipped with different SoCs requiring different pinmuxes. For now the following peripherals are included: - LED - Power Key - Cover (gpio via hall sensor) - RC5T619 PMIC (the kernel misses support for rtc and charger subdevices). - Backlight via lm3630a - Wifi sdio chip detection (mmc-powerseq and stuff) It is based on vendor kernel but heavily reworked due to many changed bindings. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04ARM: dts: vf-colibri: fix typo in top-level module compatibleMarcel Ziswiler1-1/+1
Fix typo in top-level module compatible. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx53-qsb: Use DRM bindings for the Seiko 43WVF1G panelFabio Estevam1-20/+24
Currently the parallel panel that is supported is the CLAA WVGA panel, which is the one that comes with the i.MX51 Babbage board. The default parallel panel that goes with the imx53-qsb board is the Seiko 43WVF1G LCD, so switch to the Seiko one. While at it convert to DRM bindings. The parallel display still remains disabled as the default display port is the TVE output. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx53: Spelling s/configration/configuration/Geert Uytterhoeven1-1/+1
Fix misspelling of "configuration". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6ul-14x14-evk: Assign power supplies for magnetometerAnson Huang1-0/+2
On i.MX6UL 14x14 EVK board, mag3110's power is controlled by sensor regulator, assign power supplies for mag3110 driver to do power management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6ul-14x14-evk: Fix the magnetometer node nameAnson Huang1-1/+1
Node name is supposed to be generic, use "magnetometer" instead of "mag3110" for magnetometer node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6ul-14x14-evk: Add sensors' GPIO regulatorAnson Huang1-0/+16
On i.MX6UL 14x14 EVK board, sensors' power are controlled by GPIO5_IO02, add GPIO regulator for sensors to manage their power. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6ul: Disable gpt2 by defaultAnson Huang1-0/+1
i.MX GPT driver ONLY supports 1 instance, i.MX6UL already has GPT1 enabled by default, so GPT2 should be disabled. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx7d: Add missing cooling device properties for CPUsAnson Huang1-0/+1
The cooling device properties "#cooling-cells" should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can register a cooling device. Add such missing properties. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6dl: Add missing cooling device properties for CPUsAnson Huang1-0/+1
The cooling device properties "#cooling-cells" should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can register a cooling device. Add such missing properties. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6q: Add missing cooling device properties for CPUsAnson Huang1-0/+3
The cooling device properties "#cooling-cells" should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can register a cooling device. Add such missing properties. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-apf6dev: use DRM bindingsSébastien Szymanski1-22/+28
Describe the parallel LCD using simple panel driver. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-apf6dev: add backlight supportSébastien Szymanski1-0/+8
Add PWM backlight support. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-apf6dev: rename usb-h1-vbus regulator to 5VSébastien Szymanski1-3/+5
This regulator supplies other devices and not only usb host1 so rename it. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-apf6dev: add RTC supportSébastien Szymanski1-0/+5
Add support of MCP79400 RTC. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-apf6: fix WiFiSébastien Szymanski1-2/+26
These changes make the WiFi on the APF6 board work again. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-apf6: add flow control to uart2Sébastien Szymanski1-0/+1
RTS/CTS lines are wired to the Bluetooth chip so add uart-has-rtscts property to uart2. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-apf6: add phy to fecSébastien Szymanski1-0/+14
Add the mdio bus and the phy to the fec-node. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-{apf6, apf6dev}: remove container node around pinctrl nodesSébastien Szymanski2-211/+207
Remove the function node around the pinctrl nodes that was obsoleted by commit 5fcdf6a7ed95 ("pinctrl: imx: Allow parsing DT without function nodes"). Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-{apf6, apf6dev}: switch boards to SPDX identifierSébastien Szymanski4-184/+12
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-zii-rdu2: Specify supplies for accelerometerAndrey Smirnov1-0/+2
Specify 'vdd' and 'vddio' supplies for accelerometer to avoid warnings during boot. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: linux-arm-kernel@lists.infradead.org, Cc: linux-kernel@vger.kernel.org Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-zii-rdu2: Fix accelerometer interrupt-namesAndrey Smirnov1-3/+2
According to Documentation/devicetree/bindings/iio/accel/mma8452.txt, the correct interrupt-names are "INT1" and "INT2", so fix them accordingly. While at it, modify the node to only specify "INT2" since providing two interrupts is not necessary or useful (the driver will only use one). Signed-off-by: Fabio Estevam <festevam@gmail.com> [andrew.smirnov@gmail.com modified the patch to drop INT1] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: linux-arm-kernel@lists.infradead.org, Cc: linux-kernel@vger.kernel.org Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx7ulp: Move usdhc clocks assignment to board DTAnson Huang2-4/+2
usdhc's clock rate is different according to different devices connected, so clock rate assignment should be placed in board DT according to different devices connected on each usdhc port. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: vf-colibri: add recovery mode to i2cPhilippe Schenker1-1/+11
This patch enables the recovery mode now available. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx*(colibri|apalis): add missing recovery modes to i2cPhilippe Schenker2-9/+39
This patch adds missing i2c recovery modes and corrects wrongly named ones. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6dl-yapp4: Enable the I2C3 bus on all board variantsMichal Vokáč2-5/+1
imx6dl-yapp4 Draco and Ursa boards use the I2C3 bus to control some external devices through the /dev files. So enable the I2C3 bus on all board variants, not just on Hydra. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6dl-yapp4: Enable UART2Michal Vokáč1-0/+13
The second UART is needed for 3D or MFD printer control. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-26ARM: dts: imx6qdl-rex: add gpio expander pca9535Gilles DOFFE1-0/+19
The pca9535 gpio expander is present on the Rex baseboard, but missing from the dtsi. The pca9535 is on i2c2 bus which is common to the three SOM variants (Basic/Pro/Ultra), thus it is activated by default. Add also the new gpio controller and the associated interrupt line MX6QDL_PAD_NANDF_CS3__GPIO6_IO16. Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-26ARM: dts: imx6ul-14x14-evk.dtsi: configure USBOTG1 ID pinctrlPeter Chen1-0/+8
Without configuring this pinctrl, the ID value can't be got correctly, then, the dual-role switch can't work well. Signed-off-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25ARM: dts: Disable DMA support on the BK4 vf610 device's fsl_lpuartLukasz Majewski1-0/+4
This change disables the DMA support (RX/TX) on the NXP's fsl_lpuart driver - the PIO mode is used instead. This change is necessary for better robustness of BK4's device use cases with many potentially interrupted short serial transfers. Without it the driver hangs when some distortion happens on UART lines. Signed-off-by: Lukasz Majewski <lukma@denx.de> Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25ARM: dts: imx6q-gw54xx: Do not use 'simple-audio-card,dai-link'Fabio Estevam1-11/+8
According to Documentation/devicetree/bindings/sound/simple-card.txt the 'simple-audio-card,dai-link' may be omitted when the card has only one DAI link, which is the case here. Get rid of 'simple-audio-card,dai-link' in order to fix the following build warning with W=1: arch/arm/boot/dts/imx6q-gw54xx.dts:19.32-31.5: Warning (unit_address_vs_reg): /sound-digital/simple-audio-card,dai-link@0: node has a unit name, but no reg property Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25ARM: dts: imx6dl-yapp4: Enable the MPR121 touchkey controller on HydraMichal Vokáč2-0/+17
Add the touch keyboard present on Hydra board. The controller is connected only using I2C lines. The interrupt line is not available hence we use the polling mode. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25ARM: dts: imx: Rename "iram" node to "sram"Krzysztof Kozlowski3-3/+3
The device node name should reflect generic class of a device so rename the "iram" node to "sram". This will be also in sync with upcoming DT schema. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14ARM: dts: vf610-zii-scu4-aib: Remove internal debug network interfacesFabio Estevam1-10/+0
"internal_j8" and "internal_j9" are network interfaces that are not exposed outside the board and were only ever used for debugging purposes. Get rid of them as they are not needed. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-07ARM: dts: imx6qdl-wandboard: add ethernet PHY descriptionAnatolij Gustschin1-0/+10
Wandboard devicetrees lack the ethernet PHY description, add it. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-07ARM: dts: imx6q-dhcom: Enable CAN in board DTSMarek Vasut2-2/+8
Move the CAN enablement from SoM DTSi to board DTS, as each board might need different CAN configuration. Moreover, disable CAN2 on the PDK2 as it is not available on any connector. This also fixes on-SoM SD slot operation, as it shares pins with the CAN2. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06ARM: dts: imx7d: Add opp-suspend propertyAnson Huang1-0/+3
Add "opp-suspend" property for i.MX7D to make sure system suspend with max available opp. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06ARM: dts: imx7d: Correct speed grading fuse settingsAnson Huang1-1/+1
The 800MHz opp speed grading fuse mask should be 0xd instead of 0xf according to fuse map definition: SPEED_GRADING[1:0] MHz 00 800 01 500 10 1000 11 1200 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06ARM: dts: imx6qdl-gw551x: Do not use 'simple-audio-card,dai-link'Fabio Estevam1-11/+8
According to Documentation/devicetree/bindings/sound/simple-card.txt the 'simple-audio-card,dai-link' may be omitted when the card has only one DAI link, which is the case here. Get rid of 'simple-audio-card,dai-link' in order to fix the following build warning with W=1: arch/arm/boot/dts/imx6qdl-gw551x.dtsi:109.32-121.5: Warning (unit_address_vs_reg): /sound-digital/simple-audio-card,dai-link@0: node has a unit name, but no reg property Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06ARM: dts: imx6ul-phytec-phycore-som: Add missing unit nameFabio Estevam1-1/+1
Pass the memory unit name in order to fix the following build warning with W=1: arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi:23.9-26.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Cc: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06ARM: dts: imx: Replace "simple-bus" with "simple-mfd" for anatopFabio Estevam5-5/+5
Replace "simple-bus" with "simple-mfd" for anatop node in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6sx.dtsi:603.31-616.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-1p1: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:618.31-631.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-3p0: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:633.31-646.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-2p5: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:648.32-663.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddcore: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:665.33-679.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddpcie: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:681.31-696.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddsoc: missing or empty reg/ranges property Based on a patch from Marco Felsch for the imx6qdl.dtsi. Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-03ARM: dts: imx7ulp: Add wdog1 nodeAnson Huang1-0/+10
Add wdog1 node to support watchdog driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6qdl-udoo: Add Pincfgs for OTGMarkus Kueffner1-0/+14
Add Pincfgs to enable the i.MX6's OTG feature for UDOO Signed-off-by: Markus Kueffner <kueffner.markus@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 10:50:42 +0300