summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-04-30phy: exynos-mipi-video: Add support for Exynos 5420 and 5433 SoCsMarek Szyprowski3-3/+147
This patch adds support for MIPI DPHYs found in Exynos5420-compatible (5420, 5422 and 5800) and Exynos5433 SoCs. Those SoCs differs from earlier by different offset of MIPI DPHY registers in PMU controllers (Exynos 5420-compatible case) or by moving MIPI DPHY reset registers to separate system register controllers (Exynos 5433 case). In both case also additional 5th PHY (MIPI CSIS 2) has been added. Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30phy: exynos-mipi-video: Rewrite handling of phy registersMarek Szyprowski1-35/+130
Controlling Exynos MIPI DPHY is done by handling 2 registers: one for phy reset and one for enabling it. This patch moves definitions of those 2 registers to speparate exynos_mipi_phy_desc structure, which can be defined separately for each PHY for each supported hardware variant. This code rewrite is needed to add support for newer Exynos SoCs, which have MIPI PHY related registers at different offsets or even different register regions. Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30phy: exynos-mipi-video: Drop support for direct access to PMUSylwester Nawrocki1-44/+13
There is no need to support access to the PMU through memory ioresource as now access through PMU regmap should only be used. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30phy: bcm-ns-usb2: new driver for USB 2.0 PHY on NorthstarRafał Miłecki6-0/+184
Northstar is a family of SoCs used in home routers. They have USB 2.0 and 3.0 controllers with PHYs that need to be properly initialized. This driver provides PHY init support in a generic way and can be bound with an EHCI controller driver. There are (just a few) registers being defined in bcma header. It's because DMU/CRU registers will be also needed in other drivers. We will need them e.g. in PCIe controller/PHY driver and at some point probably in clock driver for BCM53573 chipset. By using include/linux/bcma/ we avoid code duplication. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30phy: rockhip-usb: Remove CLK_IS_ROOTStephen Boyd1-1/+1
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30phy: phy-mt65xx-usb3: add support for mt2701 platformChunfeng Yun2-28/+54
Add a new OF device ID for mt2701 Some register settings to avoid RX sensitivity level degradation which may arise on mt8173 platform are separated from other platforms. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30dt-bindings: phy-mt65xx-usb: add support for mt2701 platformChunfeng Yun1-1/+3
Add a new compatible string for "mt2701" Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30phy: rcar-gen3-usb2: add extcon supportYoshihiro Shimoda2-0/+27
This patch adds extcon support for otg related channel. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30phy: rcar-gen3-usb2: Add vbus-supply to handle VBUS on/offYoshihiro Shimoda2-0/+30
To handle the VBUS on/off by a regulator driver, this patch adds regulator APIs calling in the driver and description about vbus-supply in the rcar-gen3-phy-usb2.txt. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30phy: rcar-gen3-usb2: remove unnecesary struct rcar_gen3_dataYoshihiro Shimoda1-19/+14
Since this driver uses the struct rcar_gen3_data in struct rcar_gen3_chan only, we can remove the rcar_gen3_data. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30dt-bindings: phy: bindings document for common Broadcom SATA3 PHY driverAnup Patel1-6/+9
This patch: 1. Renames DT bindings document of Broadcom STB SATA3 PHY driver to common Broadcom SATA3 PHY driver bindings document 2. Adds bindings info for NS2 SATA3 PHY Signed-off-by: Anup Patel <anup.patel@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30phy: Add support for NS2 SATA3 PHY in Broadcom SATA3 PHY driverAnup Patel3-48/+211
This patch adds support for Broadcom NS2 SATA3 PHY in existing Broadcom SATA3 PHY driver. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-30gpiolib-acpi: Duplicate con_id string when adding it to the crs lookup listVille Syrjälä1-1/+1
Calling gpiod_get() from a module and then unloading the module leads to an oops due to acpi_can_fallback_to_crs() storing the pointer to the passed 'con_id' string onto acpi_crs_lookup_list. The next guy to come along will then try to access the string but the memory may now be gone with the module. Make a copy of the passed string instead, and store the copy on the list. BUG: unable to handle kernel paging request at ffffffffa03e7855 IP: [<ffffffff81338322>] strcmp+0x12/0x30 PGD 2a07067 PUD 2a08063 PMD 74720067 PTE 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: i915(+) drm_kms_helper drm intel_gtt snd_hda_codec snd_hda_core i2c_algo_bit syscopya rea sysfillrect sysimgblt fb_sys_fops agpgart snd_soc_sst_bytcr_rt5640 coretemp hwmon intel_rapl intel_soc_dts_thermal punit_atom_debug snd_soc_rt5640 snd_soc_rl6231 serio snd_intel_sst_acpi snd_intel_sst_core video snd_soc_sst_mfld_platf orm snd_soc_sst_match backlight int3402_thermal processor_thermal_device int3403_thermal int3400_thermal acpi_thermal_r el snd_soc_core intel_soc_dts_iosf int340x_thermal_zone snd_compress i2c_hid hid snd_pcm snd_timer snd soundcore evdev sch_fq_codel efivarfs ipv6 autofs4 [last unloaded: drm] CPU: 2 PID: 3064 Comm: modprobe Tainted: G U W 4.6.0-rc3-ffrd-ipvr+ #302 Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.1403240443 FFD8 _X64_R_2014_13_1_00 03/24/2014 task: ffff8800701cd200 ti: ffff880070034000 task.ti: ffff880070034000 RIP: 0010:[<ffffffff81338322>] [<ffffffff81338322>] strcmp+0x12/0x30 RSP: 0000:ffff880070037748 EFLAGS: 00010286 RAX: 0000000080000000 RBX: ffff88007a342800 RCX: 0000000000000006 RDX: 0000000000000006 RSI: ffffffffa054f856 RDI: ffffffffa03e7856 RBP: ffff880070037748 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa054f855 R13: ffff88007281cae0 R14: 0000000000000010 R15: ffffffffffffffea FS: 00007faa51447700(0000) GS:ffff880079300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa03e7855 CR3: 0000000041eba000 CR4: 00000000001006e0 Stack: ffff880070037770 ffffffff8136ad28 ffffffffa054f855 0000000000000000 ffff88007a0a2098 ffff8800700377e8 ffffffff8136852e ffff88007a342800 00000007700377a0 ffff8800700377a0 ffffffff81412442 70672d6c656e6170 Call Trace: [<ffffffff8136ad28>] acpi_can_fallback_to_crs+0x88/0x100 [<ffffffff8136852e>] gpiod_get_index+0x25e/0x310 [<ffffffff81412442>] ? mipi_dsi_attach+0x22/0x30 [<ffffffff813685f2>] gpiod_get+0x12/0x20 [<ffffffffa04fcf41>] intel_dsi_init+0x421/0x480 [i915] [<ffffffffa04d3783>] intel_modeset_init+0x853/0x16b0 [i915] [<ffffffffa0504864>] ? intel_setup_gmbus+0x214/0x260 [i915] [<ffffffffa0510158>] i915_driver_load+0xdc8/0x19b0 [i915] [<ffffffff8160fb53>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffffa026b13b>] drm_dev_register+0xab/0xc0 [drm] [<ffffffffa026d7b3>] drm_get_pci_dev+0x93/0x1f0 [drm] [<ffffffff8160fb53>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffffa043f1f4>] i915_pci_probe+0x34/0x50 [i915] [<ffffffff81379751>] pci_device_probe+0x91/0x100 [<ffffffff8141a75a>] driver_probe_device+0x20a/0x2d0 [<ffffffff8141a8be>] __driver_attach+0x9e/0xb0 [<ffffffff8141a820>] ? driver_probe_device+0x2d0/0x2d0 [<ffffffff81418439>] bus_for_each_dev+0x69/0xa0 [<ffffffff8141a04e>] driver_attach+0x1e/0x20 [<ffffffff81419c20>] bus_add_driver+0x1c0/0x240 [<ffffffff8141b6d0>] driver_register+0x60/0xe0 [<ffffffff81377d20>] __pci_register_driver+0x60/0x70 [<ffffffffa026d9f4>] drm_pci_init+0xe4/0x110 [drm] [<ffffffff810ce04e>] ? trace_hardirqs_on+0xe/0x10 [<ffffffffa02f1000>] ? 0xffffffffa02f1000 [<ffffffffa02f1094>] i915_init+0x94/0x9b [i915] [<ffffffff810003bb>] do_one_initcall+0x8b/0x1c0 [<ffffffff810eb616>] ? rcu_read_lock_sched_held+0x86/0x90 [<ffffffff811de6d6>] ? kmem_cache_alloc_trace+0x1f6/0x270 [<ffffffff81183826>] do_init_module+0x60/0x1dc [<ffffffff81115a8d>] load_module+0x1d0d/0x2390 [<ffffffff811120b0>] ? __symbol_put+0x70/0x70 [<ffffffff811f41b2>] ? kernel_read_file+0x92/0x120 [<ffffffff811162f4>] SYSC_finit_module+0xa4/0xb0 [<ffffffff8111631e>] SyS_finit_module+0xe/0x10 [<ffffffff81001ff3>] do_syscall_64+0x63/0x350 [<ffffffff816103da>] entry_SYSCALL64_slow_path+0x25/0x25 Code: f7 48 8d 76 01 48 8d 52 01 0f b6 4e ff 84 c9 88 4a ff 75 ed 5d c3 0f 1f 00 55 48 89 e5 eb 04 84 c0 74 18 48 8d 7f 01 48 8d 76 01 <0f> b6 47 ff 3a 46 ff 74 eb 19 c0 83 c8 01 5d c3 31 c0 5d c3 66 RIP [<ffffffff81338322>] strcmp+0x12/0x30 RSP <ffff880070037748> CR2: ffffffffa03e7855 v2: Make the copied con_id const Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: stable@vger.kernel.org Fixes: 10cf4899f8af ("gpiolib: tighten up ACPI legacy gpio lookups") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-30Merge tag 'powerpc-4.6-4' of ↵Linus Torvalds7-2/+45
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A few more powerpc fixes for 4.6: - cxl: Keep IRQ mappings on context teardown from Michael Neuling - cxl: Poll for outstanding IRQs when detaching a context from Michael Neuling - Wire up preadv2 and pwritev2 syscalls from Rui Salvaterra" * tag 'powerpc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: wire up preadv2 and pwritev2 syscalls cxl: Poll for outstanding IRQs when detaching a context cxl: Keep IRQ mappings on context teardown
2016-04-30Merge tag 'edac_fix_for_4.6' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fix from Borislav Petkov: "Make sure sb_edac and i7core_edac do not terminate MCE processing on the decoding callchain prematurely" * tag 'edac_fix_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback
2016-04-30Merge tag 'pm+acpi-4.6-rc6' of ↵Linus Torvalds2-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "One revert of a recent cpufreq commit that introduced a regression and a fix for intel_pstate's Turbo Activation Ratio handling code. Specifics: - Revert cpufreq commit that attempted to fix a problem in the ondemand/conservative governor code, but did that incorrectly and introduced another problem instead (Rafael Wysocki). - Fix incorrect decoding of MSR contents related to the Turbo Activation Ratio (TAR) handling in the intel_pstate driver (Srinivas Pandruvada)" * tag 'pm+acpi-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix processing for turbo activation ratio Revert "cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC"
2016-04-30Merge tag 'mmc-v4.6-rc4' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds3-0/+87
Pull MMC fixes from Ulf Hansson: "Here are a two MMC host fixes: - sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs - sunxi: Disable eMMC HS-DDR for Allwinner A80" * tag 'mmc-v4.6-rc4' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sunxi: Disable eMMC HS-DDR (MMC_CAP_1_8V_DDR) for Allwinner A80 mmc: sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs
2016-04-30Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds12-48/+277
Pull drm fixes from Dave Airlie: "A few fixes all over the place: radeon is probably the biggest standout, it's a fix for screen corruption or hung black outputs so I thought it was worth pulling in. Otherwise some amdgpu power control fixes, some misc vmwgfx fixes, one etnaviv fix, one virtio-gpu fix, two DP MST fixes, and a single TTM fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Fix order of operation drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands. drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION drm/amdgpu: disable vm interrupts with vm_fault_stop=2 drm/amdgpu: print a message if ATPX dGPU power control is missing Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control" drm/radeon: fix vertical bars appear on monitor (v2) drm/ttm: fix kref count mess in ttm_bo_move_to_lru_tail drm/virtio: send vblank event after crtc updates drm/dp/mst: Restore primary hub guid on resume drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1() drm/etnaviv: don't move linear memory window on 3D cores without MC2.0
2016-04-30Merge tag 'for-linus' of ↵Linus Torvalds23-102/+173
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Final set of -rc fixes for 4.6. I've collected up a number of patches that are all pretty small with the exception of only a couple. The hfi1 driver has a number of important patches, and it is what really drives the line count of this pull request up. These are all small and I've got this kernel built and running in the test lab (I have most of the hardware, I think nes is the only thing in this patch set that I can't say I've personally tested and have up and running). Summary: - A number of collected fixes for oopses, memory corruptions, deadlocks, etc. All of these fixes are small (many only 5-10 lines), obvious, and tested. - Fix for the security issue related to the use of write for bi-directional communications" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: RDMA/nes: don't leak skb if carrier down IB/security: Restrict use of the write() interface IB/hfi1: Use kernel default llseek for ui device IB/hfi1: Don't attempt to free resources if initialization failed IB/hfi1: Fix missing lock/unlock in verbs drain callback IB/rdmavt: Fix send scheduling IB/hfi1: Prevent unpinning of wrong pages IB/hfi1: Fix deadlock caused by locking with wrong scope IB/hfi1: Prevent NULL pointer deferences in caching code MAINTAINERS: Update iser/isert maintainer contact info IB/mlx5: Expose correct max_sge_rd limit RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips iw_cxgb4: handle draining an idle qp iw_cxgb3: initialize ibdev.iwcm->ifname for port mapping iw_cxgb4: initialize ibdev.iwcm->ifname for port mapping IB/core: Don't drain non-existent rq queue-pair IB/core: Fix oops in ib_cache_gid_set_default_gid
2016-04-30USB: EHCI: make all debugging depend on CONFIG_DYNAMIC_DEBUGAlan Stern1-52/+34
The debugging facilities in ehci-dbg.c follow an uneven pattern. Some of them are protected by "#ifdef CONFIG_DYNAMIC_DEBUG" and some aren't, presumably in the hope of having some of the debugging output available in any configuration. This leads to build problems when dynamic debugging isn't configured. Rather than try to keep this complicated state of affairs, let's just make everything dependent on CONFIG_DYNAMIC_DEBUG. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30usb: usbip: Avoid NULL pointer dereference in case of errorKrzysztof Opasiak1-1/+1
One line above we have checked that udc is NULL so we shouldn't dereference it while printing error message. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30usbip: vudc: make dev_desc attribute binaryIgor Kotrasinski1-6/+14
We read a struct usb_device_descriptor from it, so make it an actual binary attribute. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@gmail.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Tested-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30usb: Add driver for UCSIHeikki Krogerus4-0/+720
USB Type-C Connector System Software Interface (UCSI) is specification that defines the registers and data structures that can be used to control USB Type-C ports on a system. UCSI is used on several Intel Broxton SoC based platforms. Things that UCSI can be used to control include at least USB Data Role swapping, Power Role swapping and controlling of Alternate Modes on top of providing general details about the port and the partners that are attached to it. The initial purpose of the UCSI driver is to make sure USB is in host mode on desktop and server systems that are USB dual role capable, and provide UCSI interface. The goal is to integrate the driver later to an USB Type-C framework for Linux kernel, and at the same time add support for more extensive USB Type-C port control that UCSI offers, for example data role swapping, power role swapping, Alternate Mode control etc. The UCSI specification is public can be obtained from here: http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb-type-c-ucsi-spec.html Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30Merge tag 'usb-serial-4.6-rc6' of ↵Greg Kroah-Hartman1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.6-rc6 Here are some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-30raid5: delete unnecessary warnningShaohua Li1-2/+0
If device has R5_LOCKED set, it's legit device has R5_SkipCopy set and page != orig_page. After R5_LOCKED is clear, handle_stripe_clean_event will clear the SkipCopy flag and set page to orig_page. So the warning is unnecessary. Reported-by: Joey Liao <joeyliao@qnap.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-04-29Merge tag 'sunxi-fixes-for-4.6' of ↵Kevin Hilman1-2/+0
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.6 A single regulator fix * tag 'sunxi-fixes-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator
2016-04-29ARM: davinci: only use NVMEM when availableArnd Bergmann2-0/+10
The davinci platform contains code that calls into the nvmem subsystem, but that might be a loadable module, causing a link error: arch/arm/mach-davinci/built-in.o: In function `davinci_get_mac_addr': :(.text+0x1088): undefined reference to `nvmem_device_read' arch/arm/mach-davinci/built-in.o: In function `read_factory_config': :(.text+0x214c): undefined reference to `nvmem_device_read' Also, when NVMEM is completely disabled, the functions fail with nonobvious error messages. This ensures we only call the API functions when the code is actually reachable from the board file, and otherwise prints a unique log message. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: bec3c11bad0e ("misc: at24: replace memory_accessor with nvmem_device_read") Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-04-29Merge branch 'akpm' (patches from Andrew)Linus Torvalds18-47/+151
Merge fixes from Andrew Morton: "20 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: Documentation/sysctl/vm.txt: update numa_zonelist_order description lib/stackdepot.c: allow the stack trace hash to be zero rapidio: fix potential NULL pointer dereference mm/memory-failure: fix race with compound page split/merge ocfs2/dlm: return zero if deref_done message is successfully handled Ananth has moved kcov: don't profile branches in kcov kcov: don't trace the code coverage code mm: wake kcompactd before kswapd's short sleep .mailmap: add Frank Rowand mm/hwpoison: fix wrong num_poisoned_pages accounting mm: call swap_slot_free_notify() with page lock held mm: vmscan: reclaim highmem zone if buffer_heads is over limit numa: fix /proc/<pid>/numa_maps for THP mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA check mailmap: fix Krzysztof Kozlowski's misspelled name thp: keep huge zero page pinned until tlb flush mm: exclude HugeTLB pages from THP page_mapped() logic kexec: export OFFSET(page.compound_head) to find out compound tail page kexec: update VMCOREINFO for compound_order/dtor
2016-04-29ip_tunnel: fix preempt warning in ip tunnel creation/updatingPaolo Abeni1-2/+2
After the commit e09acddf873b ("ip_tunnel: replace dst_cache with generic implementation"), a preemption debug warning is triggered on ip4 tunnels updating; the dst cache helper needs to be invoked in unpreemptible context. We don't need to load the cache on tunnel update, so this commit fixes the warning replacing the load with a dst cache reset, which is preempt safe. Fixes: e09acddf873b ("ip_tunnel: replace dst_cache with generic implementation") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callbackTony Luck2-2/+2
Both of these drivers can return NOTIFY_BAD, but this terminates processing other callbacks that were registered later on the chain. Since the driver did nothing to log the error it seems wrong to prevent other interested parties from seeing it. E.g. neither of them had even bothered to check the type of the error to see if it was a memory error before the return NOTIFY_BAD. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-29Merge branch 'pm-cpufreq-fixes'Rafael J. Wysocki2-6/+7
* pm-cpufreq-fixes: cpufreq: intel_pstate: Fix processing for turbo activation ratio Revert "cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC"
2016-04-29batman-adv: Fix reference counting of hardif_neigh_node object for neigh_nodeSven Eckelmann2-11/+7
The batadv_neigh_node was specific to a batadv_hardif_neigh_node and held an implicit reference to it. But this reference was never stored in form of a pointer in the batadv_neigh_node itself. Instead batadv_neigh_node_release depends on a consistent state of hard_iface->neigh_list and that batadv_hardif_neigh_get always returns the batadv_hardif_neigh_node object which it has a reference for. But batadv_hardif_neigh_get cannot guarantee that because it is working only with rcu_read_lock on this list. It can therefore happen that a neigh_addr is in this list twice or that batadv_hardif_neigh_get cannot find the batadv_hardif_neigh_node for an neigh_addr due to some other list operations taking place at the same time. Instead add a batadv_hardif_neigh_node pointer directly in batadv_neigh_node which will be used for the reference counter decremented on release of batadv_neigh_node. Fixes: cef63419f7db ("batman-adv: add list of unique single hop neighbors per hard-interface") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29batman-adv: Fix reference counting of vlan object for tt_local_entrySven Eckelmann2-38/+6
The batadv_tt_local_entry was specific to a batadv_softif_vlan and held an implicit reference to it. But this reference was never stored in form of a pointer in the tt_local_entry itself. Instead batadv_tt_local_remove, batadv_tt_local_table_free and batadv_tt_local_purge_pending_clients depend on a consistent state of bat_priv->softif_vlan_list and that batadv_softif_vlan_get always returns the batadv_softif_vlan object which it has a reference for. But batadv_softif_vlan_get cannot guarantee that because it is working only with rcu_read_lock on this list. It can therefore happen that an vid is in this list twice or that batadv_softif_vlan_get cannot find the batadv_softif_vlan for an vid due to some other list operations taking place at the same time. Instead add a batadv_softif_vlan pointer directly in batadv_tt_local_entry which will be used for the reference counter decremented on release of batadv_tt_local_entry. Fixes: 35df3b298fc8 ("batman-adv: fix TT VLAN inconsistency on VLAN re-add") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29batman-adv: B.A.T.M.A.N V - make sure iface is reactivated upon NETDEV_UP eventAntonio Quartulli3-0/+18
At the moment there is no explicit reactivation of an hard-interface upon NETDEV_UP event. In case of B.A.T.M.A.N. IV the interface is reactivated as soon as the next OGM is scheduled for sending, but this mechanism does not work with B.A.T.M.A.N. V. The latter does not rely on the same scheduling mechanism as its predecessor and for this reason the hard-interface remains deactivated forever after being brought down once. This patch fixes the reactivation mechanism by adding a new routing API which explicitly allows each algorithm to perform any needed operation upon interface re-activation. Such API is optional and is implemented by B.A.T.M.A.N. V only and it just takes care of setting the iface status to ACTIVE Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-29batman-adv: fix DAT candidate selection (must use vid)Antonio Quartulli1-7/+10
Now that DAT is VLAN aware, it must use the VID when computing the DHT address of the candidate nodes where an entry is going to be stored/retrieved. Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-29phy: Rename phy-brcmstb-sata driver to phy-brcm-sata driverAnup Patel3-14/+14
Currently, we have a common SATA3 PHY driver for all Broadcom STB SoCs. This driver can be extended and re-used for Broadcom iProc SoCs having same SATA3 PHY. This patch renames existing Broadcom STB SATA3 PHY driver to common Broadcom SATA3 PHY driver to share this PHY driver across Broadcom SoCs. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-29phy: rcar-gen3-usb2, rcar-gen2: Use ARCH_RENESASSimon Horman1-2/+2
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. A now redundant dependency on OF is also dropped. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-29phy: rcar-gen3-usb2: add fallback bindingSimon Horman2-2/+9
In the case of Renesas R-Car hardware we know that there are generations of SoCs, e.g. Gen 2 and Gen 3. But beyond that its not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme being adopted for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-29phy: rcar-gen2: add fallback bindingSimon Horman2-1/+8
In the case of Renesas R-Car hardware we know that there are generations of SoCs, e.g. Gen 2 and Gen 3. But beyond that its not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme being adopted for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-29Merge branch 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie7-27/+219
into drm-fixes A few fixes for 4.6. - revert amdgpu PX commit that was previously reverted on the radeon side - cleaned up version of the NI+ MC update display fix for radeon - TTM kref fix * 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: disable vm interrupts with vm_fault_stop=2 drm/amdgpu: print a message if ATPX dGPU power control is missing Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control" drm/radeon: fix vertical bars appear on monitor (v2) drm/ttm: fix kref count mess in ttm_bo_move_to_lru_tail
2016-04-29Merge branch 'drm-vmwgfx-fixes' of ↵Dave Airlie2-8/+8
git://people.freedesktop.org/~syeh/repos_linux into drm-fixes three misc vmwgfx fixes * 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: Fix order of operation drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands. drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION
2016-04-29Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds4-9/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two boot crash fixes and an IRQ handling crash fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Handle zero vector gracefully in clear_vector_irq() Revert "x86/mm/32: Set NX in __supported_pte_mask before enabling paging" xen/qspinlock: Don't kick CPU if IRQ is not initialized
2016-04-29Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds9-31/+120
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "x86 PMU driver fixes plus a core code race fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix incorrect lbr_sel_mask value perf/x86/intel/pt: Don't die on VMXON perf/core: Fix perf_event_open() vs. execve() race perf/x86/amd: Set the size of event map array to PERF_COUNT_HW_MAX perf/core: Make sysctl_perf_cpu_time_max_percent conform to documentation perf/x86/intel/rapl: Add missing Haswell model perf/x86/intel: Add model number for Skylake Server to perf
2016-04-29Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds3-6/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Two lockdep fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix lock_chain::base size locking/lockdep: Fix ->irq_context calculation
2016-04-29Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds1-11/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Ingo Molnar: "This fixes a bug in the efivars code" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Fix out-of-bounds read in variable_matches()
2016-04-29Merge tag 'media/v4.6-4' of ↵Linus Torvalds7-51/+90
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Some regression fixes: - videobuf2 core: avoid the risk of going past buffer on multi-planes and fix rw mode - fix support for 4K formats at V4L2 core - fix a trouble at davinci_fpe, caused by a bad patch - usbvision: revert a patch with a partial fixup. The fixup patch was merged already, and this one has some issues" * tag 'media/v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] vb2-memops: Fix over allocation of frame vectors [media] media: vb2: Fix regression on poll() for RW mode [media] v4l2-dv-timings.h: fix polarity for 4k formats [media] davinci_vpfe: Revert "staging: media: davinci_vpfe: remove,unnecessary ret variable" [media] usbvision: revert commit 588afcc1 [media] videobuf2-v4l2: Verify planes array in buffer dequeueing [media] videobuf2-core: Check user space planes array in dqbuf
2016-04-29Merge tag 'sound-4.6-rc6' of ↵Linus Torvalds27-229/+304
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Usually we get a big collection of fixes for ASoC once during rc. And this is it. At this time, most of fixes are about Intel Skylake ASoC driver, which is a new and still on-going development. Along with it, a slight large LOC is seen in legacy HD-audio driver, but it's merely a code move to the upper layer. Other than that, the rest are small or trivial fixes to various drivers, in addition to an ASoC dapm debugfs code fix" * tag 'sound-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ALSA: hda - Update BCLK also at hotplug for i915 HSW/BDW ALSA: hda - Add dock support for ThinkPad X260 ASoC: wm5102: Free compressed IRQ in CODEC remove ASoC: arizona: Free speaker thermal IRQs in CODEC remove ASoC: Intel: Skylake: Fix ibs/obs calc for non-integral sampling rates ASoC: Intel: sst: fix a loop timeout in sst_hsw_stream_reset() ASoC: Intel: Skylake: Fix to turn OFF codec power when entering S3 ASoC: hdac_hdmi: Fix codec power state in S3 during playback ASoC: hdac_hdmi: Fix to use dev_pm ops instead soc pm ASoC: wm8962: Correct typo when setting DSPCLK rate ASoC: nau8825: Fix jack detection across suspend ASoC: Intel: Skylake: Fix DSP resource de-allocation ASoC: Intel: Skylake: Fix for unloading module only when it is loaded ASoC: Intel: Skylake: Fix kbuild dependency ASoC: dapm: Make sure we have a card when displaying component widgets ASoC: rt5640: Correct the digital interface data select ASoC: Intel: Skylake: remove call to pci_dev_put ASoC: Intel: Skylake: Call i915 exit last ASoC: Intel: Skylake: Unmap the address last ASoC: Intel: Skylake: Freeup properly on skl_dsp_free ...
2016-04-29Documentation/sysctl/vm.txt: update numa_zonelist_order descriptionXishi Qiu1-9/+10
Commit 3193913ce62c ("mm: page_alloc: default node-ordering on 64-bit NUMA, zone-ordering on 32-bit") changes the default value of numa_zonelist_order. Update the document. Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-29lib/stackdepot.c: allow the stack trace hash to be zeroAlexander Potapenko1-4/+0
Do not bail out from depot_save_stack() if the stack trace has zero hash. Initially depot_save_stack() silently dropped stack traces with zero hashes, however there's actually no point in reserving this zero value. Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-29rapidio: fix potential NULL pointer dereferenceVladimir Zapolskiy1-2/+2
The change fixes improper check for a returned error value by class_create() function, which on error returns ERR_PTR() value, thus the original check always results in a dead code on error path. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 06:39:12 +0300