summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-03-19qeth: Fix scatter-gather regressionFrank Blaschka3-8/+42
This patch fixes a scatter-gather regression introduced with commit 5640f768 net: use a per task frag allocator Now the qeth driver can cope with bigger framents and split a fragment in sub framents if required. Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19qeth: Fix invalid router settings handlingStefan Raspl2-6/+13
Give a bad return code when specifying a router setting that is either invalid or not support on the respective device type. In addition, fall back the previous setting instead of silently switching back to 'no routing'. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19qeth: delay feature traceStefan Raspl1-1/+1
Delay tracing of the card features until the optional commands have been enabled. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-18tcp: dont handle MTU reduction on LISTEN socketEric Dumazet2-7/+14
When an ICMP ICMP_FRAG_NEEDED (or ICMPV6_PKT_TOOBIG) message finds a LISTEN socket, and this socket is currently owned by the user, we set TCP_MTU_REDUCED_DEFERRED flag in listener tsq_flags. This is bad because if we clone the parent before it had a chance to clear the flag, the child inherits the tsq_flags value, and next tcp_release_cb() on the child will decrement sk_refcnt. Result is that we might free a live TCP socket, as reported by Dormando. IPv4: Attempt to release TCP socket in state 1 Fix this issue by testing sk_state against TCP_LISTEN early, so that we set TCP_MTU_REDUCED_DEFERRED on appropriate sockets (not a LISTEN one) This bug was introduced in commit 563d34d05786 (tcp: dont drop MTU reduction indications) Reported-by: dormando <dormando@rydia.net> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-18bnx2x: fix occasional statistics off-by-4GB errorMaciej Żenczykowski1-1/+2
The UPDATE_QSTAT function introduced on February 15, 2012 in commit 1355b704b9ba "bnx2x: consistent statistics after internal driver reload" incorrectly fails to handle overflow during addition of the lower 32-bit field of a stat. This bug is present since 3.4-rc1 and should thus be considered a candidate for stable 3.4+ releases. Google-Bug-Id: 8374428 Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: Mintz Yuval <yuvalmin@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17vhost/net: fix heads usage of ubuf_infoMichael S. Tsirkin1-1/+2
ubuf info allocator uses guest controlled head as an index, so a malicious guest could put the same head entry in the ring twice, and we will get two callbacks on the same value. To fix use upend_idx which is guaranteed to be unique. Reported-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17bridge: Add support for setting BR_ROOT_BLOCK flag.Vlad Yasevich1-0/+1
Most of the support was already there. The only thing that was missing was the call to set the flag. Add this call. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17bnx2x: add missing napi deletion in error pathMichal Schmidt1-0/+1
If the hardware initialization fails in bnx2x_nic_load() after adding napi objects, they would not be deleted. A subsequent attempt to unload the bnx2x module detects a corruption in the napi list. Add the missing napi deletion to the error path. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17Merge branch 'for-davem' of ↵David S. Miller8-76/+108
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== On the NFC bits, Samuel says: "With this one we have: - A fix for properly decreasing socket ack log. - A timer and works cleanup upon NFC device removal. - A monitoroing socket cleanup round from llcp_socket_release. - A proper error report to pending sockets upon NFC device removal." Regarding the Bluetooth bits, Gustavo says: "I have these two patches for 3.9, these add support for two more devices to the bluetooth drivers." Along with those, we have a few wireless driver fixes... Bing Zhao provides an mwifiex to prevent an out-of-bounds memory access. John Crispin offers a Kconfig fix to enable some otherwise dead code in rt2x00. The correct symbols were added in -rc1 through a different tree, but the symbols for enabling the wireless driver didn't match. Larry Finger brings an rtlwifi fix for a scheduling while atomic bug, and another fix for a reassociation problem caused by failing to clear the BSSID after a disconnect. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17drivers: net: ethernet: ti: davinci_emac: fix usage of ↵Mugunthan V N1-1/+1
cpdma_check_free_tx_desc() Fix which was done in the following commit in cpsw driver has to be taken forward to davinci emac driver as well. commit d35162f89b8f00537d7b240b76d2d0e8b8d29aa0 Author: Daniel Mack <zonque@gmail.com> Date: Tue Mar 12 06:31:19 2013 +0000 net: ethernet: cpsw: fix usage of cpdma_check_free_tx_desc() Commit fae50823d0 ("net: ethernet: davinci_cpdma: Add boundary for rx and tx descriptors") introduced a function to check the current allocation state of tx packets. The return value is taken into account to stop the netqork queue on the adapter in case there are no free slots. However, cpdma_check_free_tx_desc() returns 'true' if there is room in the bitmap, not 'false', so the usage of the function is wrong. Reported-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17ethernet/tulip: DE4x5 needs VIRT_TO_BUSArnd Bergmann1-0/+1
The automated ARM build tests have shown that the tulip de4x5 driver uses the old-style virt_to_bus() interface on some architectures. Alpha, Sparc and PowerPC did not hit this problem, because they use a different code path, and most other architectures actually do provide VIRT_TO_BUS. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17isdn: hisax: netjet requires VIRT_TO_BUSArnd Bergmann1-2/+4
Disabling CONFIG_VIRT_TO_BUS on ARM showed that the hisax netjet driver depends on this deprecated functionality but is not marked so in Kconfig. Rather than adding ARM to the already long list of architectures that this driver is broken on, this patch adds 'depends on VIRT_TO_BUS' and removes the dependency on !SPARC, which is also implied by that. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibilityBjørn Mork3-27/+34
commit bd329e1 ("net: cdc_ncm: do not bind to NCM compatible MBIM devices") introduced a new policy, preferring MBIM for dual NCM/MBIM functions if the cdc_mbim driver was enabled. This caused a regression for users wanting to use NCM. Devices implementing NCM backwards compatibility according to section 3.2 of the MBIM v1.0 specification allow either NCM or MBIM on a single USB function, using different altsettings. The cdc_ncm and cdc_mbim drivers will both probe such functions, and must agree on a common policy for selecting either MBIM or NCM. Until now, this policy has been set at build time based on CONFIG_USB_NET_CDC_MBIM. Use a module parameter to set the system policy at runtime, allowing the user to prefer NCM on systems with the cdc_mbim driver. Cc: Greg Suarez <gsuarez@smithmicro.com> Cc: Alexey Orishko <alexey.orishko@stericsson.com> Reported-by: Geir Haatveit <nospam@haatveit.nu> Reported-by: Tommi Kyntola <kynde@ts.ray.fi> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54791 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17rtnetlink: Mask the rta_type when range checkingVlad Yasevich1-1/+1
Range/validity checks on rta_type in rtnetlink_rcv_msg() do not account for flags that may be set. This causes the function to return -EINVAL when flags are set on the type (for example NLA_F_NESTED). Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17Revert "ip_gre: make ipgre_tunnel_xmit() not parse network header as IP ↵Timo Teräs1-4/+1
unconditionally" This reverts commit 412ed94744d16806fbec3bd250fd94e71cde5a1f. The commit is wrong as tiph points to the outer IPv4 header which is installed at ipgre_header() and not the inner one which is protocol dependant. This commit broke succesfully opennhrp which use PF_PACKET socket with ETH_P_NHRP protocol. Additionally ssl_addr is set to the link-layer IPv4 address. This address is written by ipgre_header() to the skb earlier, and this is the IPv4 header tiph should point to - regardless of the inner protocol payload. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15Merge branch 'master' of ↵John W. Linville8-76/+108
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-03-15Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bugZhouyi Zhou2-2/+16
When neighbour table is full, dst_neigh_lookup/dst_neigh_lookup_skb will return -ENOBUFS which is absolutely non zero, while all the code in kernel which use above functions assume failure only on zero return which will cause panic. (for example: : https://bugzilla.kernel.org/show_bug.cgi?id=54731). This patch corrects above error with smallest changes to kernel source code and also correct two return value check missing bugs in drivers/infiniband/hw/cxgb4/cm.c Tested on my x86_64 SMP machine Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15smsc75xx: configuration help incorrectly mentions smsc95xxRobert de Vries1-1/+1
The Kconfig file help information incorrectly mentions that the SMSC LAN75xx config option is for SMSC LAN95xx devices. Signed-off-by: Robert de Vries <rhdv@xs4all.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15Merge branch 'fixes' of ↵David S. Miller5-7/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== A few different bug fixes, including several for issues with userspace communication that have gone unnoticed up until now. These are intended for net/3.9. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15net: fec: fix missing napi_disable callGeorg Hofmann1-0/+1
Commit dc975382d2ef36be7e78fac3717927de1a5abcd8 introduces napi support but never calls napi_disable. This will generate a kernel oops (kernel BUG at include/linux/netdevice.h:473!) every time, when ndo_stop is called followed by ndo_start. Add the missing napi_diable call. Signed-off-by: Georg Hofmann <georg@hofmannsweb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15net: fec: restart the FEC when PHY speed changesLucas Stach2-11/+16
Proviously we would only restart the FEC when PHY link or duplex state changed. PHY does not always bring down the link for speed changes, in which case we would not detect any change and keep FEC running. Switching link speed without restarting the FEC results in the FEC being stuck in an indefinite state, generating error conditions for every packet. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14skb: Propagate pfmemalloc on skb from head page onlyPavel Emelyanov1-2/+4
Hi. I'm trying to send big chunks of memory from application address space via TCP socket using vmsplice + splice like this mem = mmap(128Mb); vmsplice(pipe[1], mem); /* splice memory into pipe */ splice(pipe[0], tcp_socket); /* send it into network */ When I'm lucky and a huge page splices into the pipe and then into the socket _and_ client and server ends of the TCP connection are on the same host, communicating via lo, the whole connection gets stuck! The sending queue becomes full and app stops writing/splicing more into it, but the receiving queue remains empty, and that's why. The __skb_fill_page_desc observes a tail page of a huge page and erroneously propagates its page->pfmemalloc value onto socket (the pfmemalloc on tail pages contain garbage). Then this skb->pfmemalloc leaks through lo and due to the tcp_v4_rcv sk_filter if (skb->pfmemalloc && !sock_flag(sk, SOCK_MEMALLOC)) /* true */ return -ENOMEM goto release_and_discard; no packets reach the socket. Even TCP re-transmits are dropped by this, as skb cloning clones the pfmemalloc flag as well. That said, here's the proper page->pfmemalloc propagation onto socket: we must check the huge-page's head page only, other pages' pfmemalloc and mapping values do not contain what is expected in this place. However, I'm not sure whether this fix is _complete_, since pfmemalloc propagation via lo also oesn't look great. Both, bit propagation from page to skb and this check in sk_filter, were introduced by c48a11c7 (netvm: propagate page->pfmemalloc to skb), in v3.5 so Mel and stable@ are in Cc. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14tcp: fix skb_availroom()Eric Dumazet3-4/+6
Chrome OS team reported a crash on a Pixel ChromeBook in TCP stack : https://code.google.com/p/chromium/issues/detail?id=182056 commit a21d45726acac (tcp: avoid order-1 allocations on wifi and tx path) did a poor choice adding an 'avail_size' field to skb, while what we really needed was a 'reserved_tailroom' one. It would have avoided commit 22b4a4f22da (tcp: fix retransmit of partially acked frames) and this commit. Crash occurs because skb_split() is not aware of the 'avail_size' management (and should not be aware) Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Mukesh Agrawal <quiche@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13rtlwifi: rtl8192cu: Fix problem that prevents reassociationLarry Finger1-52/+35
The driver was failing to clear the BSSID when a disconnect happened. That prevented a reconnection. This problem is reported at https://bugzilla.redhat.com/show_bug.cgi?id=789605, https://bugzilla.redhat.com/show_bug.cgi?id=866786, https://bugzilla.redhat.com/show_bug.cgi?id=906734, and https://bugzilla.kernel.org/show_bug.cgi?id=46171. Thanks to Jussi Kivilinna for making the critical observation that led to the solution. Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Tested-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Tested-by: Alessandro Lannocca <alessandro.lannocca@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13rt2x00: fix rt2x00 to work with the new ralink SoC config symbolsJohn Crispin2-9/+9
Since v3.9-rc1 the kernel has basic support for Ralink WiSoC. The config symbols are named slightly different than before. Fix the rt2x00 to match the new symbols. The commit causing this breakage is: commit ae2b5bb6570481b50a7175c64176b82da0a81836 Author: John Crispin <blogic@openwrt.org> Date: Sun Jan 20 22:05:30 2013 +0100 MIPS: ralink: adds Kbuild files Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13Merge branch 'for-upstream' of ↵John W. Linville2-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2013-03-13net: qmi_wwan: set correct altsetting for Gobi 1K devicesBjørn Mork1-33/+16
commit bd877e4 ("net: qmi_wwan: use a single bind function for all device types") made Gobi 1K devices fail probing. Using the number of endpoints in the default altsetting to decide whether the function use one or two interfaces is wrong. Other altsettings may provide more endpoints. With Gobi 1K devices, USB interface #3's altsetting is 0 by default, but altsetting 0 only provides one interrupt endpoint and is not sufficent for QMI. Altsetting 1 provides all 3 endpoints required for qmi_wwan and works with QMI. Gobi 1K layout for intf#3 is: Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 0 Endpoint Descriptor: Interrupt IN Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 1 Endpoint Descriptor: Interrupt IN Endpoint Descriptor: Bulk IN Endpoint Descriptor: Bulk OUT Prior to commit bd877e4, we would call usbnet_get_endpoints before giving up finding enough endpoints. Removing the early endpoint number test and the strict functional descriptor requirement allow qmi_wwan_bind to continue until usbnet_get_endpoints has made the final attempt to collect endpoints. This restores the behaviour from before commit bd877e4 without losing the added benefit of using a single bind function. The driver has always required a CDC Union functional descriptor for two-interface functions. Using the existence of this descriptor to detect two-interface functions is the logically correct method. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13ipv4: fix definition of FIB_TABLE_HASHSZDenis V. Lunev1-7/+5
a long time ago by the commit commit 93456b6d7753def8760b423ac6b986eb9d5a4a95 Author: Denis V. Lunev <den@openvz.org> Date: Thu Jan 10 03:23:38 2008 -0800 [IPV4]: Unify access to the routing tables. the defenition of FIB_HASH_TABLE size has obtained wrong dependency: it should depend upon CONFIG_IP_MULTIPLE_TABLES (as was in the original code) but it was depended from CONFIG_IP_ROUTE_MULTIPATH This patch returns the situation to the original state. The problem was spotted by Tingwei Liu. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Tingwei Liu <tingw.liu@gmail.com> CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13sctp: don't break the loop while meeting the active_path so as to find the ↵Xufeng Zhang1-1/+1
matched transport sctp_assoc_lookup_tsn() function searchs which transport a certain TSN was sent on, if not found in the active_path transport, then go search all the other transports in the peer's transport_addr_list, however, we should continue to the next entry rather than break the loop when meet the active_path transport. Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13sctp: Use correct sideffect command in duplicate cookie handlingVlad Yasevich1-1/+1
When SCTP is done processing a duplicate cookie chunk, it tries to delete a newly created association. For that, it has to set the right association for the side-effect processing to work. However, when it uses the SCTP_CMD_NEW_ASOC command, that performs more work then really needed (like hashing the associationa and assigning it an id) and there is no point to do that only to delete the association as a next step. In fact, it also creates an impossible condition where an association may be found by the getsockopt() call, and that association is empty. This causes a crash in some sctp getsockopts. The solution is rather simple. We simply use SCTP_CMD_SET_ASOC command that doesn't have all the overhead and does exactly what we need. Reported-by: Karl Heiss <kheiss@gmail.com> Tested-by: Karl Heiss <kheiss@gmail.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13tg3: 5715 does not link up when autoneg offNithin Sujir1-0/+8
Commit d13ba512cbba7de5d55d7a3b2aae7d83c8921457 ("tg3: Remove SPEED_UNKNOWN checks") cleaned up the autoneg advertisement by removing some dead code. One effect of this change was that the advertisement register would not be updated if autoneg is turned off. This exposed a bug on the 5715 device w.r.t linking. The 5715 defaults to advertise only 10Mb Full duplex. But with autoneg disabled, it needs the configured speed enabled in the advertisement register to link up. This patch adds the work around to advertise all speeds on the 5715 when autoneg is disabled. Reported-by: Marcin Miotk <marcinmiotk81@gmail.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13Merge branch 'sfc-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller1-1/+2
Ben Hutchings says: ==================== Just the one bug fix I mentioned before, but it's a pretty important one as it can cause silent data corruption or IOMMU page faults. This would be suitable for stable and should apply cleanly to all the 3.x.y branches. I'm still working through testing of larger sets of fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13bonding: don't call update_speed_duplex() under spinlocksVeaceslav Falico1-4/+2
bond_update_speed_duplex() might sleep while calling underlying slave's routines. Move it out of atomic context in bond_enslave() and remove it from bond_miimon_commit() - it was introduced by commit 546add79, however when the slave interfaces go up/change state it's their responsibility to fire NETDEV_UP/NETDEV_CHANGE events so that bonding can properly update their speed. I've tested it on all combinations of ifup/ifdown, autoneg/speed/duplex changes, remote-controlled and local, on (not) MII-based cards. All changes are visible. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13net: ethernet: cpsw: fix usage of cpdma_check_free_tx_desc()Daniel Mack1-1/+1
Commit fae50823d0 ("net: ethernet: davinci_cpdma: Add boundary for rx and tx descriptors") introduced a function to check the current allocation state of tx packets. The return value is taken into account to stop the netqork queue on the adapter in case there are no free slots. However, cpdma_check_free_tx_desc() returns 'true' if there is room in the bitmap, not 'false', so the usage of the function is wrong. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Reported-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12sfc: Only use TX push if a single descriptor is to be writtenBen Hutchings1-1/+2
Using TX push when notifying the NIC of multiple new descriptors in the ring will very occasionally cause the TX DMA engine to re-use an old descriptor. This can result in a duplicated or partly duplicated packet (new headers with old data), or an IOMMU page fault. This does not happen when the pushed descriptor is the only one written. TX push also provides little latency benefit when a packet requires more than one descriptor. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-03-12net/core: move vlan_depth out of while loop in skb_network_protocol()Li RongQing1-1/+1
[ Bug added added in commit 05e8ef4ab2d8087d (net: factor out skb_mac_gso_segment() from skb_gso_segment() ) ] move vlan_depth out of while loop, or else vlan_depth always is ETH_HLEN, can not be increased, and lead to infinite loop when frame has two vlan headers. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12ARM:net: an issue for k which is u32, never < 0Chen Gang1-1/+1
k is u32 which never < 0, need type cast, or cause issue. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mircea Gherzan <mgherzan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12netconsole: don't call __netpoll_cleanup() while atomicVeaceslav Falico1-6/+9
__netpoll_cleanup() is called in netconsole_netdev_event() while holding a spinlock. Release/acquire the spinlock before/after it and restart the loop. Also, disable the netconsole completely, because we won't have chance after the restart of the loop, and might end up in a situation where nt->enabled == 1 and nt->np.dev == NULL. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12bridge: reserve space for IFLA_BRPORT_FAST_LEAVEstephen hemminger1-0/+1
The bridge multicast fast leave feature was added sufficient space was not reserved in the netlink message. This means the flag may be lost in netlink events and results of queries. Found by observation while looking up some netlink stuff for discussion with Vlad. Problem introduced by commit c2d3babfafbb9f6629cfb47139758e59a5eb0d80 Author: David S. Miller <davem@davemloft.net> Date: Wed Dec 5 16:24:45 2012 -0500 bridge: implement multicast fast leave Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller1-3/+3
Included changes ares: - fix packet parsing routine to avoid to read beyond the packet boundary Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12net/ipv4: Ensure that location of timestamp option is storedDavid Ward1-4/+1
This is needed in order to detect if the timestamp option appears more than once in a packet, to remove the option if the packet is fragmented, etc. My previous change neglected to store the option location when the router addresses were prespecified and Pointer > Length. But now the option location is also stored when Flag is an unrecognized value, to ensure these option handling behaviors are still performed. Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12cxgb4: Allow for backward compatibility with new VPD scheme.Santosh Rastapur1-3/+9
New scheme calls for 3rd party VPD at offset 0x0 and Chelsio VPD at offset 0x400 of the function. If no 3rd party VPD is present, then a copy of Chelsio's VPD will be at offset 0x0 to keep in line with PCI spec which requires the VPD to be present at offset 0x0. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12batman-adv: verify tt len does not exceed packet lenMarek Lindner1-3/+3
batadv_iv_ogm_process() accesses the packet using the tt_num_changes attribute regardless of the real packet len (assuming the length check was done before). Therefore a length check is needed to avoid reading random memory. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-12Bluetooth: Device 0cf3:3008 should map AR 3012Sunguk Lee2-0/+3
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=3008 Rev= 0.01 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Sunguk Lee <d3m3vilurr@gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-03-11Merge tag 'nfc-fixes-3.9-1' of ↵John W. Linville2-9/+55
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes Samuel Ortiz <sameo@linux.intel.com> says: This is the first NFC pull request for 3.9 fixes With this one we have: - A fix for properly decreasing socket ack log. - A timer and works cleanup upon NFC device removal. - A monitoroing socket cleanup round from llcp_socket_release. - A proper error report to pending sockets upon NFC device removal. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds4-14/+40
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc minor fixes mostly related to tracing" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: s390: Fix a header dependencies related build error tracing: update documentation of snapshot utility tracing: Do not return EINVAL in snapshot when not allocated tracing: Add help of snapshot feature when snapshot is empty ftrace: Update the kconfig for DYNAMIC_FTRACE
2013-03-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds84-696/+843
Pull networking fixes from David Miller: 1) Missing cancel of work items in mac80211 MLME, from Ben Greear. 2) Fix DMA mapping handling in iwlwifi by using coherent DMA for command headers, from Johannes Berg. 3) Decrease the amount of pressure on the page allocator by using order 1 pages less in iwlwifi, from Emmanuel Grumbach. 4) Fix mesh PS broadcast OOPS in mac80211, from Marco Porsch. 5) Don't forget to recalculate idle state in mac80211 monitor interface, from Felix Fietkau. 6) Fix varargs in netfilter conntrack handler, from Joe Perches. 7) Need to reset entire chip when command queue fills up in iwlwifi, from Emmanuel Grumbach. 8) The TX antenna value must be valid when calibrations are performed in iwlwifi, fix from Dor Shaish. 9) Don't generate netfilter audit log entries when audit is disabled, from Gao Feng. 10) Deal with DMA unit hang on e1000e during power state transitions, from Bruce Allan. 11) Remove BUILD_BUG_ON check from igb driver, from Alexander Duyck. 12) Fix lockdep warning on i2c handling of igb driver, from Carolyn Wyborny. 13) Fix several TTY handling issues in IRDA ircomm tty driver, from Peter Hurley. 14) Several QFQ packet scheduler fixes from Paolo Valente. 15) When VXLAN encapsulates on transmit, we have to reset the netfilter state. From Zang MingJie. 16) Fix jiffie check in net_rx_action() so that we really cap the processing at 2HZ. From Eric Dumazet. 17) Fix erroneous trigger of IP option space exhaustion, when routers are pre-specified and we are looking to see if we can insert a timestamp, we will have the space. From David Ward. 18) Fix various issues in benet driver wrt waiting for firmware to finish POST after resets or errors. From Gavin Shan and Sathya Perla. 19) Fix TX locking in SFC driver, from Ben Hutchings. 20) Like the VXLAN fix above, when we encap in a TUN device we have to reset the netfilter state. This should fix several strange crashes reported by Dave Jones and others. From Eric Dumazet. 21) Don't forget to clean up MAC address resources when shutting down a port in mlx4 driver, from Yan Burman. 22) Fix divide by zero in vmxnet3 driver, from Bhavesh Davda. 23) Fix device statistic regression in tg3 when the driver is using phylib, from Nithin Sujir. 24) Fix info leak in several netlink handlers, from Mathias Krause. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits) 6lowpan: Fix endianness issue in is_addr_link_local(). rrunner.c: fix possible memory leak in rr_init_one() dcbnl: fix various netlink info leaks rtnl: fix info leak on RTM_GETLINK request for VF devices bridge: fix mdb info leaks tg3: Update link_up flag for phylib devices ipv6: stop multicast forwarding to process interface scoped addresses bridging: fix rx_handlers return code netlabel: fix build problems when CONFIG_IPV6=n drivers/isdn: checkng length to be sure not memory overflow net/rds: zero last byte for strncpy bnx2x: Fix SFP+ misconfiguration in iSCSI boot scenario bnx2x: Fix intermittent long KR2 link up time macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode. team: unsyc the devices addresses when port is removed bridge: add missing vid to br_mdb_get() Fix: sparse warning in inet_csk_prepare_forced_close afkey: fix a typo MAINTAINERS: Update qlcnic maintainers list netlabel: correctly list all the static label mappings ...
2013-03-11Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds11-41/+42
Pull UML fixes from Richard Weinberger: "This update brings various fixes. Nothing special... In my local queue I have some more fixes which will be sent later to you. 3.9 uncovered strange UML issues. :(" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Use tty_port in SIGWINCH handler um: Use tty_port_operations->destruct um: fix build failure due to mess-up of sig_info protorype um: add missing declaration of 'getrlimit()' and friends net : enable tx time stamping in the vde driver. hostfs: fix a not needed double check
2013-03-11Merge branch 'for-linus' of ↵Linus Torvalds8-40/+185
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Except for the largish change to the ALPS driver adding "Dolphin V1" support and Wacom getting a new signature of yet another device, the rest are straightforward driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: mms114 - Fix regulator enable and disable paths Input: ads7864 - check return value of regulator enable Input: tc3589x-keypad - fix keymap size Input: wacom - add support for 0x10d Input: ALPS - update documentation for recent touchpad driver mods Input: ALPS - add "Dolphin V1" touchpad support Input: ALPS - remove unused argument to alps_enter_command_mode() Input: cypress_ps2 - fix trackpadi found in Dell XPS12
2013-03-11s390: Fix a header dependencies related build errorLi Zefan1-0/+1
Commit 877c685607925238e302cd3aa38788dca6c1b226 ("perf: Remove include of cgroup.h from perf_event.h") caused this build failure if PERF_EVENTS is enabled: In file included from arch/s390/include/asm/perf_event.h:9:0, from include/linux/perf_event.h:24, from kernel/events/ring_buffer.c:12: arch/s390/include/asm/cpu_mf.h: In function 'qctri': arch/s390/include/asm/cpu_mf.h:61:12: error: 'EINVAL' undeclared (first use in this function) cpu_mf.h had an implicit errno.h dependency, which was added indirectly via cgroups.h but not anymore. Add it explicitly. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Link: http://lkml.kernel.org/r/51385F79.7000106@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-20 09:41:22 +0300