summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2008-07-26ftrace: fix modular buildIngo Molnar1-0/+2
fix: ERROR: "start_critical_timings" [drivers/acpi/processor.ko] undefined! ERROR: "stop_critical_timings" [drivers/acpi/processor.ko] undefined! Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26ftrace: disable tracing on acpi idle callsSteven Rostedt1-0/+6
The acpi idle waits calls local_irq_save and then uses mwait to go into idle. The tracer gets reenabled at local_irq_save but does not detect that the idle allows for wake ups. This patch adds code to disable the tracing when acpi puts the CPU to idle. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24ftrace: remove latency-tracer leftoverIngo Molnar1-3/+0
remove the :vim=ft=help tag from trace files. I used them years ago to syntax-highlight traces and forgot about this hack. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24Merge branch 'linus' into tracing/urgentIngo Molnar3139-139349/+244017
2008-07-24Merge branch 'x86/auditsc' of ↵Linus Torvalds4-12/+192
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'x86/auditsc' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: i386 syscall audit fast-path x86_64 ia32 syscall audit fast-path x86_64 syscall audit fast-path x86_64: remove bogus optimization in sysret_signal
2008-07-24Merge branch 'sched/for-linus' of ↵Linus Torvalds14-256/+229
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: hrtick_enabled() should use cpu_active() sched, x86: clean up hrtick implementation sched: fix build error, provide partition_sched_domains() unconditionally sched: fix warning in inc_rt_tasks() to not declare variable 'rq' if it's not needed cpu hotplug: Make cpu_active_map synchronization dependency clear cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2) sched: rework of "prioritize non-migratable tasks over migratable ones" sched: reduce stack size in isolated_cpu_setup() Revert parts of "ftrace: do not trace scheduler functions" Fixed up conflicts in include/asm-x86/thread_info.h (due to the TIF_SINGLESTEP unification vs TIF_HRTICK_RESCHED removal) and kernel/sched_fair.c (due to cpu_active_map vs for_each_cpu_mask_nr() introduction).
2008-07-24Merge branch 'cpus4096-for-linus' of ↵Linus Torvalds50-270/+442
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits) NR_CPUS: Replace NR_CPUS in speedstep-centrino.c cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP NR_CPUS: Replace NR_CPUS in cpufreq userspace routines NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target cpumask: Provide a generic set of CPUMASK_ALLOC macros cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr Revert "cpumask: introduce new APIs" cpumask: make for_each_cpu_mask a bit smaller net: Pass reference to cpumask variable in net/sunrpc/svc.c ... Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually
2008-07-24Merge branch 'core/softlockup-for-linus' of ↵Linus Torvalds6-15/+86
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core/softlockup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: softlockup: fix invalid proc_handler for softlockup_panic softlockup: fix watchdog task wakeup frequency softlockup: fix watchdog task wakeup frequency softlockup: show irqtrace softlockup: print a module list on being stuck softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression softlockup: fix false positives on nohz if CPU is 100% idle for more than 60 seconds softlockup: fix softlockup_thresh fix softlockup: fix softlockup_thresh unaligned access and disable detection at runtime softlockup: allow panic on lockup
2008-07-24Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds94-795/+7354
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (85 commits) [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR) [ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB) [ARM] pxa: add base support for PXA930 (aka Tavor-P) [ARM] Update mach-types [ARM] pxa: make littleton to use the new smc91x platform data [ARM] pxa: make zylonite to use the new smc91x platform data [ARM] pxa: make mainstone to use the new smc91x platform data [ARM] pxa: make lubbock to use new smc91x platform data [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable [NET] smc91x: add SMC91X_NOWAIT flag to platform data [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_* [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata" [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper Support for LCD on e740 e750 e400 and e800 e-series PDAs E-series UDC support PXA UDC - allow use of inverted GPIO for pullup Add e350 support Fix broken e-series build E-series GPIO / IRQ definitions. ...
2008-07-24i386 syscall audit fast-pathRoland McGrath1-2/+53
This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-24x86_64 ia32 syscall audit fast-pathRoland McGrath2-4/+88
This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-24x86_64 syscall audit fast-pathRoland McGrath2-1/+50
This adds a fast path for 64-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. This path does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-24x86_64: remove bogus optimization in sysret_signalRoland McGrath1-5/+1
This short-circuit path in sysret_signal looks wrong to me. AFAICT, in practice the branch is never taken--and if it were, it would go wrong. To wit, try loading a module whose init function does set_thread_flag(TIF_IRET), and see insmod crash (presumably with a wrong user stack pointer). This is because the FIXUP_TOP_OF_STACK work hasn't been done yet when we jump around the call to ptregscall_common and get to int_with_check--where it expects the user RSP,SS,CS and EFLAGS to have been stored by FIXUP_TOP_OF_STACK. I don't think it's normally possible to get to sysret_signal with no _TIF_DO_NOTIFY_MASK bits set anyway, so these two instructions are already superfluous. If it ever did happen, it is harmless to call do_notify_resume with nothing for it to do. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-23Merge branch 'for-linus' of ↵Linus Torvalds10-248/+573
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdhci: highmem capable PIO routines sg: reimplement sg mapping iterator mmc_test: print message when attaching to card mmc: Remove Russell as primecell mci maintainer mmc_block: bounce buffer highmem support sdhci: fix bad warning from commit c8b3e02 sdhci: add warnings for bad buffers in ADMA path mmc_test: test oversized sg lists mmc_test: highmem tests s3cmci: ensure host stopped on machine shutdown au1xmmc: suspend/resume implementation s3cmci: fixes for section mismatch warnings pxamci: trivial fix of DMA alignment register bit clearing
2008-07-23Merge branch 'for-linus' of ↵Linus Torvalds33-339/+4590
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (24 commits) I/OAT: I/OAT version 3.0 support I/OAT: tcp_dma_copybreak default value dependent on I/OAT version I/OAT: Add watchdog/reset functionality to ioatdma iop_adma: cleanup iop_chan_xor_slot_count iop_adma: document how to calculate the minimum descriptor pool size iop_adma: directly reclaim descriptors on allocation failure async_tx: make async_tx_test_ack a boolean routine async_tx: remove depend_tx from async_tx_sync_epilog async_tx: export async_tx_quiesce async_tx: fix handling of the "out of descriptor" condition in async_xor async_tx: ensure the xor destination buffer remains dma-mapped async_tx: list_for_each_entry_rcu() cleanup dmaengine: Driver for the Synopsys DesignWare DMA controller dmaengine: Add slave DMA interface dmaengine: add DMA_COMPL_SKIP_{SRC,DEST}_UNMAP flags to control dma unmap dmaengine: Add dma_client parameter to device_alloc_chan_resources dmatest: Simple DMA memcpy test client dmaengine: DMA engine driver for Marvell XOR engine iop-adma: fix platform driver hotplug/coldplug dmaengine: track the number of clients using a channel ... Fixed up conflict in drivers/dca/dca-sysfs.c manually
2008-07-23Merge branch 'for_linus' of ↵Linus Torvalds17-113/+1025
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: kgdboc console poll hooks for mpsc uart kgdb: kgdboc console poll hooks for cpm uart kgdb, powerpc: arch specific powerpc kgdb support kgdb: support for ARCH=arm kgdb: remove unused HAVE_ARCH_KGDB_SHADOW_INFO config variable
2008-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds57-1466/+1613
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (60 commits) ide: small whitespace fixes ide: ide-cd_ioctl.c fix sparse integer as NULL pointer warnings ide: ide-cd.c fix sparse endianness warnings ide-cd: convert to using the new atapi_flags ide: remove unused PC_FLAG_DRQ_INTERRUPT ide-scsi: convert to using the new atapi_flags ide-tape: convert to using the new atapi_flags ide-floppy: convert to using the new atapi_flags (take 2) ide: add per-device flags ide: use rq->cmd instead of pc->c in atapi common code ide-scsi: pass packet command in rq->cmd ide-tape: pass packet command in rq->cmd ide-tape: make room for packet command ids in rq->cmd ide-floppy: pass packet command in rq->cmd ide: remove pc->callback member from ide_atapi_pc ide-scsi: use drive->pc_callback instead of pc->callback ide-tape: use drive->pc_callback instead of pc->callback ide-floppy: use drive->pc_callback instead of pc->callback ide: push pc callback pointer into the ide_drive_t structure drivers/ide/ide-tape.c: remove double kfree ...
2008-07-23ide: small whitespace fixesPavel Machek2-2/+2
Small whitespace fixes for drivers/ide. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: ide-cd_ioctl.c fix sparse integer as NULL pointer warningsHarvey Harrison1-4/+4
The function ide_cd_queue_pc should be checked as the bufflen arg is dereferenced and lots of callers are passing in NULL. drivers/ide/ide-cd_ioctl.c:124:46: warning: Using plain integer as NULL pointer drivers/ide/ide-cd_ioctl.c:149:47: warning: Using plain integer as NULL pointer drivers/ide/ide-cd_ioctl.c:231:46: warning: Using plain integer as NULL pointer drivers/ide/ide-cd_ioctl.c:374:46: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: ide-cd.c fix sparse endianness warningsHarvey Harrison1-11/+8
drivers/ide/ide-cd.c:1276:46: warning: Using plain integer as NULL pointer drivers/ide/ide-cd.c:1298:19: warning: cast to restricted __be32 drivers/ide/ide-cd.c:1300:4: warning: cast to restricted __be32 drivers/ide/ide-cd.c:1522:14: warning: cast to restricted __le16 drivers/ide/ide-cd.c:1523:14: warning: cast to restricted __le16 drivers/ide/ide-cd.c:1525:14: warning: cast to restricted __be16 drivers/ide/ide-cd.c:1526:14: warning: cast to restricted __be16 drivers/ide/ide-cd.c:1667:37: warning: cast to restricted __be16 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-cd: convert to using the new atapi_flagsBorislav Petkov3-109/+64
There should be no functionality change resulting from this patch. [bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: remove unused PC_FLAG_DRQ_INTERRUPTBorislav Petkov2-3/+1
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-scsi: convert to using the new atapi_flagsBorislav Petkov1-16/+1
Remove unused IDESCSI_PC_RQ while at it. There should be no functionality change resulting from this patch. [bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-tape: convert to using the new atapi_flagsBorislav Petkov1-45/+23
There should be no functionality change resulting from this patch. [bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-floppy: convert to using the new atapi_flags (take 2)Borislav Petkov3-50/+31
while at it, remove PC_FLAG_ZIP_DRIVE from the packed command flags altogether and query the drive type through drive->atapi_flags. v2: ide-floppy fix. There should be no functionality change resulting from this patch. [bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add per-device flagsBorislav Petkov1-0/+60
Push device flags up into ide_drive_t. There should be no functionality change resulting from this patch. [bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: use rq->cmd instead of pc->c in atapi common codeBorislav Petkov1-5/+13
There should be no functionality change resulting from this patch. [bart: s/HWGROUP(drive)/hwif->hwgroup/] Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-scsi: pass packet command in rq->cmdBorislav Petkov1-0/+2
Make a redundant copy of the packet command bits into rq->cmd. Later, after all drivers have been converted, it'll be switched to use that in the common code instead of pc->c. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-tape: pass packet command in rq->cmdBorislav Petkov1-8/+11
Make a redundant copy of the packet command bits into rq->cmd. Later, after all drivers have been converted, it'll be switched to use that in the common code instead of pc->c. While at it, simplify ide_tape_create_rw_cmd. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-tape: make room for packet command ids in rq->cmdBorislav Petkov1-11/+11
ide-tape uses rq->cmd for special commands from the chrdev interface so move those to byte 13 (BLK_MAX_CDB = 16) since a packet cmd is max 12 bytes. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-floppy: pass packet command in rq->cmdBorislav Petkov1-0/+4
Make a redundant copy of the packet command bits into rq->cmd. Later, after all drivers have been converted, it'll be switched to use that in the common code instead of pc->c. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: remove pc->callback member from ide_atapi_pcBorislav Petkov1-2/+0
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-scsi: use drive->pc_callback instead of pc->callbackBorislav Petkov2-10/+5
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-tape: use drive->pc_callback instead of pc->callbackBorislav Petkov2-5/+6
The if-else block in the IRQ handler is only temporary so that bisect searches don't break and it'll be removed after converting the remainder of the drivers. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-floppy: use drive->pc_callback instead of pc->callbackBorislav Petkov2-4/+10
It is important that drive->pc_callback is set prior to enabling IRQs on the device since this is called from the IRQ handler. Otherwise it hurts as I learnt the hard way from the several "Kernel panic - not synching: Fatal exception in interrupt" during the weekend :). The if-else block in the IRQ handler is only temporary so that bisect searches don't break and it'll be removed after converting the remainder of the drivers. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: push pc callback pointer into the ide_drive_t structureBorislav Petkov1-2/+7
Refrain from carrying the callback ptr with every packet command since the callback function is only one anyways. ide_drive_t is probably not the most suitable place for it right now but is the more sane solution. Besides, these structs are going to be reorganized anyways during the generic ide rewrite. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23drivers/ide/ide-tape.c: remove double kfreeDarren Jenkins1-1/+0
Coverity CID: 2336 USE_AFTER_FREE drivers/ide/ide-tape.c ide_tape_kfree_buffer() double free's a pointer (hint freed by an alias in first outer loop). This patch simply removes the superfluous kfree(). Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom> Acked-by: Borislav Petkov <petkovbb@gmail.com> Cc: gadio@netvision.net.il Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ide_host_free() helper (take 2)Bartlomiej Zolnierkiewicz6-20/+88
* Add ide_host_free() helper and convert ide_host_remove() to use it. * Fix handling of ide_host_register() failure in ide_host_add(), icside.c, ide-generic.c, falconide.c and sgiioc4.c. While at it: * Fix handling of ide_host_alloc_all() failure in ide-generic.c. * Fix handling of ide_host_alloc() failure in falconide.c (also return the correct error value if no device is found). v2: * falconide build fix. (From Stephen Rothwell) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: allocate ide_hwif_t instances dynamicallyBartlomiej Zolnierkiewicz2-9/+6
* Allocate ide_hwif_t instances dynamically and remove ide_hwifs[]. This cuts almost ~14kB from ide-probe.o (x86-32, MAX_HWIFS == 10): text data bss dec hex filename 9140 40 14084 23264 5ae0 drivers/ide/ide-probe.o.before 9169 40 44 9253 2425 drivers/ide/ide-probe.o.after * Remove no longer needed ide_init_port_data() call from ide_unregister(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ide_ports[]Bartlomiej Zolnierkiewicz1-2/+9
* Add ide_ports[] table keeping pointers to all initialized ports. * Set ide_ports[] entry for a given port in init_irq() and clear it ide_remove_port_from_hwgroup(). * Convert init_irq() to use ide_ports[] instead of ide_hwifs[] for grouping ports into hwgroup. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: move ide_remove_port_from_hwgroup() to ide-probe.cBartlomiej Zolnierkiewicz2-35/+35
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: fix IDE port slots reservation and freeing (take 2)Bartlomiej Zolnierkiewicz1-37/+50
* Make ide_find_port_slot() return port slot index. * Add ide_free_port_slot() helper. * Move ide_init_port_data() call and error printk() from ide_find_port_slot() to ide_host_alloc_all(). * Make ide_{find,free}_port_slot() take ide_cfg_mtx mutex and convert them use ide_indexes bitmap to keep track of reserved port slots. * Don't set hwif->chipset in ide_host_alloc_all() as it is no longer necessary. v2: * Pass the correct slot index to ide_init_port_data(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: fix ide_host_register() return valueBartlomiej Zolnierkiewicz1-20/+18
Fix ide_host_register() to fail only if all ports cannot be registered. While at it: * Use host->ports[] instead of ide_hwifs[] and remove idx[]. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ide_host_add() helperBartlomiej Zolnierkiewicz23-136/+72
Add ide_host_add() helper which does ide_host_alloc()+ide_host_register(), then convert ide_setup_pci_device[s](), ide_legacy_device_add() and some host drivers to use it. While at it: * Fix ide_setup_pci_device[s](), ide_arm.c, gayle.c, ide-4drives.c, macide.c, q40ide.c, cmd640.c and cs5520.c to return correct error value. * -ENOENT -> -ENOMEM in rapide.c, ide-h8300.c, ide-generic.c, au1xxx-ide.c and pmac.c * -ENODEV -> -ENOMEM in palm_bk3710.c, ide_platform.c and delkin_cb.c * -1 -> -ENOMEM in ide-pnp.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add struct ide_host (take 3)Bartlomiej Zolnierkiewicz27-349/+264
* Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add struct ide_tp_ops (take 2)Bartlomiej Zolnierkiewicz23-225/+358
* Add struct ide_tp_ops for transport methods. * Add 'const struct ide_tp_ops *tp_ops' to struct ide_port_info and ide_hwif_t. * Set the default hwif->tp_ops in ide_init_port_data(). * Set host driver specific hwif->tp_ops in ide_init_port(). * Export ide_exec_command(), ide_read_status(), ide_read_altstatus(), ide_read_sff_dma_status(), ide_set_irq(), ide_tf_{load,read}() and ata_{in,out}put_data(). * Convert host drivers and core code to use struct ide_tp_ops. * Remove no longer needed default_hwif_transport(). * Cleanup ide_hwif_t from methods that are now in struct ide_tp_ops. While at it: * Use struct ide_port_info in falconide.c and q40ide.c. * Rename ata_{in,out}put_data() to ide_{in,out}put_data(). v2: * Fix missing convertion in ns87415.c. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add 'config' field to hw_regs_tBartlomiej Zolnierkiewicz3-3/+3
Add 'config' field to hw_regs_t and use it to set hwif->config_data in ide_init_port_hw(), then convert ide_legacy_init_one() to use hw->config. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-generic: probing fixBartlomiej Zolnierkiewicz1-7/+1
* Don't skip probing IDE port if the corresponding ide_hwifs[] slot is already occupied. * Remove duplicate idx[i] assignment. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23gayle: reserve memory resources at onceBartlomiej Zolnierkiewicz1-14/+11
* Reserve memory resources for all IDE ports at once by moving request_mem_region() out of 'for ()' loop and always defining GAYLE_IDEREG_SIZE to 0x2000. * Keep memory resources even if no free IDE slots can be found (this driver is unloadable currently). Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: filter out "default" transfer mode values in set_xfer_rate()Bartlomiej Zolnierkiewicz13-35/+8
* Filter out "default" transfer mode values (0x00 - default PIO mode, 0x01 - default PIO mode w/ IORDY disabled) in write handler for obsoleted /proc/ide/hd?/settings:current_speed setting. Allowing "default" transfer mode values is a dangerous thing to do as we don't support programming controller to the "default" transfer mode and devices often use different values for the default and maximum PIO mode (i.e. PIO2 default and PIO4 maximum) so the controller will stay programmed for higher PIO mode while device will use the lower PIO mode. There is no functionality loss as by using special IOCTLs device can still be programmed to "default" transfer modes (it is only useful for debugging/testing purposes anyway). * Remove no longer needed IDE_HFLAG_ABUSE_SET_DMA_MODE host flag, it was previously used by few host drivers to program the controller to PIO0 timings for "default" transfer mode == 0x01 (although some host drivers would program invalid PIO timings instead). * Cleanup ide_set_xfer_rate() and add BUG_ON(). Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 23:57:08 +0300