summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-01-24KVM: VMX: remove special CPL cache access during transition to real mode.Gleb Natapov1-8/+4
Since vmx_get_cpl() always returns 0 when VCPU is in real mode it is no longer needed. Also reset CPL cache to zero during transaction to protected mode since transaction may happen while CS.selectors & 3 != 0, but in reality CPL is 0. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24KVM: x86 emulator: convert a few freestanding emulations to fastopAvi Kivity1-3/+3
Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24KVM: x86 emulator: rearrange fastop definitionsAvi Kivity1-35/+35
Make fastop opcodes usable in other emulations. Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24KVM: x86 emulator: convert 2-operand IMUL to fastopAvi Kivity1-8/+6
Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24KVM: x86 emulator: convert BT/BTS/BTR/BTC/BSF/BSR to fastopAvi Kivity1-50/+26
Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24KVM: x86 emulator: convert INC/DEC to fastopAvi Kivity1-17/+7
Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24KVM: x86 emulator: covert SETCC to fastopAvi Kivity1-31/+29
This is a bit of a special case since we don't have the usual byte/word/long/quad switch; instead we switch on the condition code embedded in the instruction. Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24KVM: x86 emulator: convert shift/rotate instructions to fastopAvi Kivity1-41/+31
SHL, SHR, ROL, ROR, RCL, RCR, SAR, SAL Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24KVM: x86 emulator: Convert SHLD, SHRD to fastopAvi Kivity1-12/+21
Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-22KVM: x86: improve reexecute_instructionXiao Guangrong3-11/+45
The current reexecute_instruction can not well detect the failed instruction emulation. It allows guest to retry all the instructions except it accesses on error pfn For example, some cases are nested-write-protect - if the page we want to write is used as PDE but it chains to itself. Under this case, we should stop the emulation and report the case to userspace Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-22KVM: x86: let reexecute_instruction work for tdpXiao Guangrong1-18/+43
Currently, reexecute_instruction refused to retry all instructions if tdp is enabled. If nested npt is used, the emulation may be caused by shadow page, it can be fixed by dropping the shadow page. And the only condition that tdp can not retry the instruction is the access fault on error pfn Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-22KVM: x86: clean up reexecute_instructionXiao Guangrong1-7/+6
Little cleanup for reexecute_instruction, also use gpa_to_gfn in retry_instruction Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-17KVM: set_memory_region: Remove unnecessary variable memslotTakuya Yoshikawa1-6/+5
One such variable, slot, is enough for holding a pointer temporarily. We also remove another local variable named slot, which is limited in a block, since it is confusing to have the same name in this function. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-17KVM: set_memory_region: Don't check for overlaps unless we create or move a slotTakuya Yoshikawa1-8/+10
Don't need the check for deleting an existing slot or just modifiying the flags. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-17KVM: set_memory_region: Don't jump to out_free unnecessarilyTakuya Yoshikawa1-4/+3
This makes the separation between the sanity checks and the rest of the code a bit clearer. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-17KVM: s390: kvm/sigp.c: fix memory leakageCong Ding1-1/+3
the variable inti should be freed in the branch CPUSTAT_STOPPED. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14KVM: MMU: Conditionally reschedule when kvm_mmu_slot_remove_write_access() ↵Takuya Yoshikawa1-0/+5
takes a long time If the userspace starts dirty logging for a large slot, say 64GB of memory, kvm_mmu_slot_remove_write_access() needs to hold mmu_lock for a long time such as tens of milliseconds. This patch controls the lock hold time by asking the scheduler if we need to reschedule for others. One penalty for this is that we need to flush TLBs before releasing mmu_lock. But since holding mmu_lock for a long time does affect not only the guest, vCPU threads in other words, but also the host as a whole, we should pay for that. In practice, the cost will not be so high because we can protect a fair amount of memory before being rescheduled: on my test environment, cond_resched_lock() was called only once for protecting 12GB of memory even without THP. We can also revisit Avi's "unlocked TLB flush" work later for completely suppressing extra TLB flushes if needed. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14KVM: Make kvm_mmu_slot_remove_write_access() take mmu_lock by itselfTakuya Yoshikawa2-4/+4
Better to place mmu_lock handling and TLB flushing code together since this is a self-contained function. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14KVM: Make kvm_mmu_change_mmu_pages() take mmu_lock by itselfTakuya Yoshikawa2-5/+8
No reason to make callers take mmu_lock since we do not need to protect kvm_mmu_change_mmu_pages() and kvm_mmu_slot_remove_write_access() together by mmu_lock in kvm_arch_commit_memory_region(): the former calls kvm_mmu_commit_zap_page() and flushes TLBs by itself. Note: we do not need to protect kvm->arch.n_requested_mmu_pages by mmu_lock as can be seen from the fact that it is read locklessly. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14KVM: Remove unused slot_bitmap from kvm_mmu_pageTakuya Yoshikawa3-22/+0
Not needed any more. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14KVM: MMU: Make kvm_mmu_slot_remove_write_access() rmap basedTakuya Yoshikawa1-13/+15
This makes it possible to release mmu_lock and reschedule conditionally in a later patch. Although this may increase the time needed to protect the whole slot when we start dirty logging, the kernel should not allow the userspace to trigger something that will hold a spinlock for such a long time as tens of milliseconds: actually there is no limit since it is roughly proportional to the number of guest pages. Another point to note is that this patch removes the only user of slot_bitmap which will cause some problems when we increase the number of slots further. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14KVM: MMU: Remove unused parameter level from __rmap_write_protect()Takuya Yoshikawa1-3/+3
No longer need to care about the mapping level in this function. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14KVM: Write protect the updated slot only when dirty logging is enabledTakuya Yoshikawa2-2/+7
Calling kvm_mmu_slot_remove_write_access() for a deleted slot does nothing but search for non-existent mmu pages which have mappings to that deleted memory; this is safe but a waste of time. Since we want to make the function rmap based in a later patch, in a manner which makes it unsafe to be called for a deleted slot, we makes the caller see if the slot is non-zero and being dirty logged. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14Merge branch 'kvm-ppc-next' of https://github.com/agraf/linux-2.6 into queueGleb Natapov12-11/+153
2013-01-10KVM: trace: Fix exit decoding.Cornelia Huck1-1/+1
trace_kvm_userspace_exit has been missing the KVM_EXIT_WATCHDOG exit. CC: Bharat Bhushan <r65777@freescale.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-10KVM: MMU: fix infinite fault access retryXiao Guangrong2-10/+38
We have two issues in current code: - if target gfn is used as its page table, guest will refault then kvm will use small page size to map it. We need two #PF to fix its shadow page table - sometimes, say a exception is triggered during vm-exit caused by #PF (see handle_exception() in vmx.c), we remove all the shadow pages shadowed by the target gfn before go into page fault path, it will cause infinite loop: delete shadow pages shadowed by the gfn -> try to use large page size to map the gfn -> retry the access ->... To fix these, we can adjust page size early if the target gfn is used as page table Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-10KVM: MMU: fix Dirty bit missed if CR0.WP = 0Xiao Guangrong2-39/+38
If the write-fault access is from supervisor and CR0.WP is not set on the vcpu, kvm will fix it by adjusting pte access - it sets the W bit on pte and clears U bit. This is the chance that kvm can change pte access from readonly to writable Unfortunately, the pte access is the access of 'direct' shadow page table, means direct sp.role.access = pte_access, then we will create a writable spte entry on the readonly shadow page table. It will cause Dirty bit is not tracked when two guest ptes point to the same large page. Note, it does not have other impact except Dirty bit since cr0.wp is encoded into sp.role It can be fixed by adjusting pte access before establishing shadow page table. Also, after that, no mmu specified code exists in the common function and drop two parameters in set_spte Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-10KVM: PPC: BookE: Add EPR ONE_REG syncAlexander Graf3-1/+27
We need to be able to read and write the contents of the EPR register from user space. This patch implements that logic through the ONE_REG API and declares its (never implemented) SREGS counterpart as deprecated. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10KVM: PPC: BookE: Implement EPR exitAlexander Graf7-3/+79
The External Proxy Facility in FSL BookE chips allows the interrupt controller to automatically acknowledge an interrupt as soon as a core gets its pending external interrupt delivered. Today, user space implements the interrupt controller, so we need to check on it during such a cycle. This patch implements logic for user space to enable EPR exiting, disable EPR exiting and EPR exiting itself, so that user space can acknowledge an interrupt when an external interrupt has successfully been delivered into the guest vcpu. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10KVM: PPC: BookE: Emulate mfspr on EPRAlexander Graf1-0/+3
The EPR register is potentially valid for PR KVM as well, so we need to emulate accesses to it. It's only defined for reading, so only handle the mfspr case. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10KVM: PPC: BookE: Allow irq deliveries to inject requestsAlexander Graf1-0/+5
When injecting an interrupt into guest context, we usually don't need to check for requests anymore. At least not until today. With the introduction of EPR, we will have to create a request when the guest has successfully accepted an external interrupt though. So we need to prepare the interrupt delivery to abort guest entry gracefully. Otherwise we'd delay the EPR request. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10KVM: PPC: Fix mfspr/mtspr MMUCFG emulationMihai Caraman2-5/+2
On mfspr/mtspr emulation path Book3E's MMUCFG SPR with value 1015 clashes with G4's MSSSR0 SPR. Move MSSSR0 emulation from generic part to Books3S. MSSSR0 also clashes with Book3S's DABRX SPR. DABRX was not explicitly handled so Book3S execution flow will behave as before. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10KVM: PPC: Book3S: PR: Enable alternative instruction for SC 1Alexander Graf3-0/+34
When running on top of pHyp, the hypercall instruction "sc 1" goes straight into pHyp without trapping in supervisor mode. So if we want to support PAPR guest in this configuration we need to add a second way of accessing PAPR hypercalls, preferably with the exact same semantics except for the instruction. So let's overlay an officially reserved instruction and emulate PAPR hypercalls whenever we hit that one. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10KVM: PPC: Only WARN on invalid emulationAlexander Graf1-1/+2
When we hit an emulation result that we didn't expect, that is an error, but it's nothing that warrants a BUG(), because it can be guest triggered. So instead, let's only WARN() the user that this happened. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10KVM: PPC: Fix SREGS documentation referenceMihai Caraman1-1/+1
Reflect the uapi folder change in SREGS API documentation. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Reviewed-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10KVM: s390: Gracefully handle busy conditions on ccw_device_startChristian Borntraeger1-5/+8
In rare cases a virtio command might try to issue a ccw before a former ccw was answered with a tsch. This will cause CC=2 (busy). Lets just retry in that case. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-10KVM: s390: Dynamic allocation of virtio-ccw I/O data.Cornelia Huck1-106/+174
Dynamically allocate any data structures like ccw used when doing channel I/O. Otherwise, we'd need to add extra serialization for the different callbacks using the same data structures. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09KVM: x86 emulator: convert basic ALU ops to fastopAvi Kivity1-78/+34
Opcodes: TEST CMP ADD ADC SUB SBB XOR OR AND Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09KVM: x86 emulator: add macros for defining 2-operand fastop emulationAvi Kivity1-0/+12
Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09KVM: x86 emulator: convert NOT, NEG to fastopAvi Kivity1-13/+4
Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09KVM: x86 emulator: mark CMP, CMPS, SCAS, TEST as NoWriteAvi Kivity1-12/+8
Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09KVM: x86 emulator: introduce NoWrite flagAvi Kivity1-0/+4
Instead of disabling writeback via OP_NONE, just specify NoWrite. Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09KVM: x86 emulator: Support for declaring single operand fastopsAvi Kivity1-0/+25
Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09KVM: x86 emulator: framework for streamlining arithmetic opcodesAvi Kivity1-0/+41
We emulate arithmetic opcodes by executing a "similar" (same operation, different operands) on the cpu. This ensures accurate emulation, esp. wrt. eflags. However, the prologue and epilogue around the opcode is fairly long, consisting of a switch (for the operand size) and code to load and save the operands. This is repeated for every opcode. This patch introduces an alternative way to emulate arithmetic opcodes. Instead of the above, we have four (three on i386) functions consisting of just the opcode and a ret; one for each operand size. For example: .align 8 em_notb: not %al ret .align 8 em_notw: not %ax ret .align 8 em_notl: not %eax ret .align 8 em_notq: not %rax ret The prologue and epilogue are shared across all opcodes. Note the functions use a special calling convention; notably eflags is an input/output parameter and is not clobbered. Rather than dispatching the four functions through a jump table, the functions are declared as a constant size (8) so their address can be calculated. Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi.kivity@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-08KVM: VMX: fix incorrect cached cpl value with real/v8086 modesMarcelo Tosatti1-11/+4
CPL is always 0 when in real mode, and always 3 when virtual 8086 mode. Using values other than those can cause failures on operations that check CPL. Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-08KVM: x86: remove unused variable from walk_addr_generic()Gleb Natapov1-1/+1
Fix compilation warning. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-08KVM: MMU: simplify folding of dirty bit into accessed_dirtyGleb Natapov1-10/+6
MMU code tries to avoid if()s HW is not able to predict reliably by using bitwise operation to streamline code execution, but in case of a dirty bit folding this gives us nothing since write_fault is checked right before the folding code. Lets just piggyback onto the if() to make code more clear. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-08KVM: mmu: remove unused trace eventGleb Natapov1-6/+0
trace_kvm_mmu_delay_free_pages() is no longer used. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-08KVM: s390: Add support for channel I/O instructions.Cornelia Huck10-5/+202
Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass intercepts for channel I/O instructions to userspace. Only I/O instructions interacting with I/O interrupts need to be handled in-kernel: - TEST PENDING INTERRUPTION (tpi) dequeues and stores pending interrupts entirely in-kernel. - TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel and exits via KVM_EXIT_S390_TSCH to userspace for subchannel- related processing. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-08KVM: s390: Base infrastructure for enabling capabilities.Cornelia Huck2-1/+27
Make s390 support KVM_ENABLE_CAP. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 16:42:06 +0300