summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-05-06Merge tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbdLinus Torvalds11-110/+250
Pull ksmbd server fixes from Steve French: "Ten ksmbd server fixes, including some important security fixes: - Two use after free fixes - Fix RCU callback race - Deadlock fix - Three patches to prevent session setup attacks - Prevent guest users from establishing multichannel sessions - Fix null pointer dereference in query FS info - Memleak fix" * tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbd: ksmbd: call rcu_barrier() in ksmbd_server_exit() ksmbd: fix racy issue under cocurrent smb2 tree disconnect ksmbd: fix racy issue from smb2 close and logoff with multichannel ksmbd: not allow guest user on multichannel ksmbd: fix deadlock in ksmbd_find_crypto_ctx() ksmbd: block asynchronous requests when making a delay on session setup ksmbd: destroy expired sessions ksmbd: fix racy issue from session setup and logoff ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem() ksmbd: fix memleak in session setup
2023-05-06Merge tag 'net-6.4-rc1' of ↵Linus Torvalds84-407/+735
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ...
2023-05-06Merge tag 'i2c-for-6.4-rc1-part2' of ↵Linus Torvalds7-55/+91
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "Some more driver bugfixes and a DT binding conversion" * tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: dt-bindings: i2c: brcm,kona-i2c: convert to YAML i2c: gxp: fix build failure without CONFIG_I2C_SLAVE i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks i2c: omap: Fix standard mode false ACK readings i2c: tegra: Fix PEC support for SMBUS block read
2023-05-06s390: remove the unneeded select GCC12_NO_ARRAY_BOUNDSLukas Bulwahn1-1/+0
Commit 0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") makes config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS. As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390 architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped. Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS". Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-05-06perf metrics: Fix SEGV with --for-each-cgroupIan Rogers1-0/+1
Ensure the metric threshold is copied correctly or else a use of uninitialized memory happens. Fixes: d0a3052f6faefffc ("perf metric: Compute and print threshold values") Reported-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230505204119.3443491-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-06perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used ↵Arnaldo Carvalho de Melo3-20/+174
structs + CO-RE Linus reported a build break due to using a vmlinux without a BTF elf section to generate the vmlinux.h header with bpftool for use in the BPF tools in tools/perf/util/bpf_skel/*.bpf.c. Instead add a vmlinux.h file with the structs needed with the fields the tools need, marking the structs with __attribute__((preserve_access_index)), so that libbpf's CO-RE code can fixup the struct field offsets. In some cases the vmlinux.h file that was being generated by bpftool from the kernel BTF information was not needed at all, just including linux/bpf.h, sometimes linux/perf_event.h was enough as non-UAPI types were not being used. To keep te patch small, include those UAPI headers from the trimmed down vmlinux.h file, that then provides the tools with just the structs and the subset of its fields needed for them. Testing it: # perf lock contention -b find / > /dev/null ^C contended total wait max wait avg wait type caller 7 53.59 us 10.86 us 7.66 us rwlock:R start_this_handle+0xa0 2 30.35 us 21.99 us 15.17 us rwsem:R iterate_dir+0x52 1 9.04 us 9.04 us 9.04 us rwlock:W start_this_handle+0x291 1 8.73 us 8.73 us 8.73 us spinlock raw_spin_rq_lock_nested+0x1e # # perf lock contention -abl find / > /dev/null ^C contended total wait max wait avg wait address symbol 1 262.96 ms 262.96 ms 262.96 ms ffff8e67502d0170 (mutex) 12 244.24 us 39.91 us 20.35 us ffff8e6af56f8070 mmap_lock (rwsem) 7 30.28 us 6.85 us 4.33 us ffff8e6c865f1d40 rq_lock (spinlock) 3 7.42 us 4.03 us 2.47 us ffff8e6c864b1d40 rq_lock (spinlock) 2 3.72 us 2.19 us 1.86 us ffff8e6c86571d40 rq_lock (spinlock) 1 2.42 us 2.42 us 2.42 us ffff8e6c86471d40 rq_lock (spinlock) 4 2.11 us 559 ns 527 ns ffffffff9a146c80 rcu_state (spinlock) 3 1.45 us 818 ns 482 ns ffff8e674ae8384c (rwlock) 1 870 ns 870 ns 870 ns ffff8e68456ee060 (rwlock) 1 663 ns 663 ns 663 ns ffff8e6c864f1d40 rq_lock (spinlock) 1 573 ns 573 ns 573 ns ffff8e6c86531d40 rq_lock (spinlock) 1 472 ns 472 ns 472 ns ffff8e6c86431740 (spinlock) 1 397 ns 397 ns 397 ns ffff8e67413a4f04 (spinlock) # # perf test offcpu 95: perf record offcpu profiling tests : Ok # # perf kwork latency --use-bpf Starting trace, Hit <Ctrl+C> to stop and report ^C Kwork Name | Cpu | Avg delay | Count | Max delay | Max delay start | Max delay end | -------------------------------------------------------------------------------------------------------------------------------- (w)flush_memcg_stats_dwork | 0000 | 1056.212 ms | 2 | 2112.345 ms | 550113.229573 s | 550115.341919 s | (w)toggle_allocation_gate | 0000 | 10.144 ms | 62 | 416.389 ms | 550113.453518 s | 550113.869907 s | (w)0xffff8e6748e28080 | 0002 | 0.623 ms | 1 | 0.623 ms | 550110.989841 s | 550110.990464 s | (w)vmstat_shepherd | 0000 | 0.586 ms | 10 | 2.828 ms | 550111.971536 s | 550111.974364 s | (w)vmstat_update | 0007 | 0.363 ms | 5 | 1.634 ms | 550113.222520 s | 550113.224154 s | (w)vmstat_update | 0000 | 0.324 ms | 10 | 2.827 ms | 550111.971526 s | 550111.974354 s | (w)0xffff8e674c5f4a58 | 0002 | 0.102 ms | 5 | 0.134 ms | 550110.989839 s | 550110.989972 s | (w)psi_avgs_work | 0001 | 0.086 ms | 3 | 0.107 ms | 550114.957852 s | 550114.957959 s | (w)psi_avgs_work | 0000 | 0.079 ms | 5 | 0.100 ms | 550118.605668 s | 550118.605768 s | (w)kfree_rcu_monitor | 0006 | 0.079 ms | 1 | 0.079 ms | 550110.925821 s | 550110.925900 s | (w)psi_avgs_work | 0004 | 0.079 ms | 1 | 0.079 ms | 550109.581835 s | 550109.581914 s | (w)psi_avgs_work | 0001 | 0.078 ms | 1 | 0.078 ms | 550109.197809 s | 550109.197887 s | (w)psi_avgs_work | 0002 | 0.077 ms | 5 | 0.086 ms | 550110.669819 s | 550110.669905 s | <SNIP> # strace -e bpf -o perf-stat-bpf-counters.output perf stat -e cycles --bpf-counters sleep 1 Performance counter stats for 'sleep 1': 6,197,983 cycles 1.003922848 seconds time elapsed 0.000000000 seconds user 0.002032000 seconds sys # head -7 perf-stat-bpf-counters.output bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/perf_attr_map", bpf_fd=0, file_flags=0}, 16) = 3 bpf(BPF_OBJ_GET_INFO_BY_FD, {info={bpf_fd=3, info_len=88, info=0x7ffcead64990}}, 16) = 0 bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=3, key=0x24129e0, value=0x7ffcead65a48, flags=BPF_ANY}, 32) = 0 bpf(BPF_LINK_GET_FD_BY_ID, {link_id=1252}, 12) = -1 ENOENT (No such file or directory) bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65780, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, +func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 116) = 4 bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65920, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0, +func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0, fd_array=NULL}, 128) = 4 bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\20\0\0\0\20\0\0\0\5\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=45, btf_log_size=0, btf_log_level=0}, 28) = 4 # Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Song Liu <song@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Co-developed-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/lkml/ZFU1PJrn8YtHIqno@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextJakub Kicinski14-23/+39
There's a fix which landed in net-next, pull it in along with the couple of minor cleanups. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-05perf stat: Separate bperf from bpf_profilerDmitrii Dolgov2-2/+7
It seems that perf stat -b <prog id> doesn't produce any results: $ perf stat -e cycles -b 4 -I 10000 -vvv Control descriptor is not initialized cycles: 0 0 0 time counts unit events 10.007641640 <not supported> cycles Looks like this happens because fentry/fexit progs are getting loaded, but the corresponding perf event is not enabled and not added into the events bpf map. I think there is some mixing up between two type of bpf support, one for bperf and one for bpf_profiler. Both are identified via evsel__is_bpf, based on which perf events are enabled, but for the latter (bpf_profiler) a perf event is required. Using evsel__is_bperf to check only bperf produces expected results: $ perf stat -e cycles -b 4 -I 10000 -vvv Control descriptor is not initialized ------------------------------------------------------------ perf_event_attr: size 136 sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3 ------------------------------------------------------------ [...perf_event_attr for other CPUs...] ------------------------------------------------------------ cycles: 309426 169009 169009 time counts unit events 10.010091271 309426 cycles The final numbers correspond (at least in the level of magnitude) to the same metric obtained via bpftool. Fixes: 112cb56164bc2108 ("perf stat: Introduce config stat.bpf-counter-events") Reviewed-by: Song Liu <song@kernel.org> Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com> Tested-by: Song Liu <song@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230412182316.11628-1-9erthalion6@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-05-05Merge tag 'devicetree-fixes-for-6.4-1' of ↵Linus Torvalds10-10/+9
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Add Conor Dooley as a DT binding maintainer - Swap the order of parsing /memreserve/ and /reserved-memory nodes so that the /reserved-memory nodes which have more information are handled first - Fix some property dependencies in riscv,pmu binding - Update maintainers entries on a couple of bindings * tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: add Conor as a dt-bindings maintainer dt-bindings: perf: riscv,pmu: fix property dependencies dt-bindings: xilinx: Remove Naga from memory and mtd bindings of: fdt: Scan /memreserve/ last dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro
2023-05-05Merge tag 'docs-6.4-2' of git://git.lwn.net/linuxLinus Torvalds12-24/+652
Pull more documentation updates from Jonathan Corbet: "A handful of late-arriving documentation fixes, plus one Spanish translation that has been ready for some time but got applied late" * tag 'docs-6.4-2' of git://git.lwn.net/linux: docs/sp_SP: Add translation of process/adding-syscalls CREDITS: Update email address for Mat Martineau Documentation: update kernel stack for x86_64 docs: Remove unnecessary unicode character docs: fix "Reviewd" typo Documentation: timers: hrtimers: Make hybrid union historical docs/admin-guide/mm/ksm.rst fix intraface -> interface typo doc:it_IT: fix some typos
2023-05-05Merge tag 'trace-v6.4-rc1' of ↵Linus Torvalds4-5/+38
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull more tracing updates from Steven Rostedt: - Make buffer_percent read/write. The buffer_percent file is how users can state how long to block on the tracing buffer depending on how much is in the buffer. When it hits the "buffer_percent" it will wake the task waiting on the buffer. For some reason it was set to read-only. This was not noticed because testing was done as root without SELinux, but with SELinux it will prevent even root to write to it without having CAP_DAC_OVERRIDE. - The "touched_functions" was added this merge window, but one of the reasons for adding it was not implemented. That was to show what functions were not only touched, but had either a direct trampoline attached to it, or a kprobe or live kernel patching that can "hijack" the function to run a different function. The point is to know if there's functions in the kernel that may not be behaving as the kernel code shows. This can be used for debugging. TODO: Add this information to kernel oops too. * tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached tracing: Fix permissions for the buffer_percent file
2023-05-05Merge tag 'locking-core-2023-05-05' of ↵Linus Torvalds33-111/+209
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: - Introduce local{,64}_try_cmpxchg() - a slightly more optimal primitive, which will be used in perf events ring-buffer code - Simplify/modify rwsems on PREEMPT_RT, to address writer starvation - Misc cleanups/fixes * tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomic: Correct (cmp)xchg() instrumentation locking/x86: Define arch_try_cmpxchg_local() locking/arch: Wire up local_try_cmpxchg() locking/generic: Wire up local{,64}_try_cmpxchg() locking/atomic: Add generic try_cmpxchg{,64}_local() support locking/rwbase: Mitigate indefinite writer starvation locking/arch: Rename all internal __xchg() names to __arch_xchg()
2023-05-05Merge branch 'x86-uaccess-cleanup': x86 uaccess header cleanupsLinus Torvalds5-94/+124
Merge my x86 uaccess updates branch. The LAM ("Linear Address Masking") updates in this release made me unhappy about how "access_ok()" was done, and it actually turned out to have a couple of small bugs in it too. This is my cleanup of the code: - use the sign bit of the __user pointer rather than masking the address and checking it against the TASK_SIZE range. We already did this part for the get/put_user() side, but 'access_ok()' did the naïve "mask and range check" thing, which not only generates nasty code, but also ended up meaning that __access_ok itself didn't do a good job, and so copy_from_user_nmi() didn't get the check right. - move all the code that is 64-bit only into the 64-bit version of the header file, so that we don't unnecessarily pollute the shared x86 code and make it look like LAM might work in 32-bit too. - fix a bug in the address masking (that doesn't end up mattering: in this case the fix was to just remove the buggy code entirely). - a couple of trivial cleanups and added commentary about the access_ok() rules. * x86-uaccess-cleanup: x86-64: mm: clarify the 'positive addresses' user address rules x86: mm: remove 'sign' games from LAM untagged_addr*() macros x86: uaccess: move 32-bit and 64-bit parts into proper <asm/uaccess_N.h> header x86: mm: remove architecture-specific 'access_ok()' define x86-64: make access_ok() independent of LAM
2023-05-05Merge tag 'riscv-for-linus-6.4-mw2' of ↵Linus Torvalds22-68/+682
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for hibernation - The .rela.dyn section has been moved to the init area - A fix for the SBI probing to allow for implementation-defined behavior - Various other fixes and cleanups throughout the tree * tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: include cpufeature.h in cpufeature.c riscv: Move .rela.dyn to the init sections dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support riscv: compat_syscall_table: Fixup compile warning RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename RISC-V: fix sifive and thead section mismatches in errata RISC-V: Align SBI probe implementation with spec riscv: mm: remove redundant parameter of create_fdt_early_page_table riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection RISC-V: Add arch functions to support hibernation/suspend-to-disk RISC-V: mm: Enable huge page support to kernel_page_present() function RISC-V: Factor out common code of __cpu_resume_enter() RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
2023-05-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds23-177/+1208
Pull more kvm updates from Paolo Bonzini: "This includes the 6.4 changes for RISC-V, and a few bugfix patches for other architectures. For x86, this closes a longstanding performance issue in the newer and (usually) more scalable page table management code. RISC-V: - ONE_REG interface to enable/disable SBI extensions - Zbb extension for Guest/VM - AIA CSR virtualization x86: - Fix a long-standing TDP MMU flaw, where unloading roots on a vCPU can result in the root being freed even though the root is completely valid and can be reused as-is (with a TLB flush). s390: - A couple of bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix race in gmap_make_secure() KVM: s390: pv: fix asynchronous teardown for small VMs KVM: x86: Preserve TDP MMU roots until they are explicitly invalidated RISC-V: KVM: Virtualize per-HART AIA CSRs RISC-V: KVM: Use bitmap for irqs_pending and irqs_pending_mask RISC-V: KVM: Add ONE_REG interface for AIA CSRs RISC-V: KVM: Implement subtype for CSR ONE_REG interface RISC-V: KVM: Initial skeletal support for AIA RISC-V: KVM: Drop the _MASK suffix from hgatp.VMID mask defines RISC-V: Detect AIA CSRs from ISA string RISC-V: Add AIA related CSR defines RISC-V: KVM: Allow Zbb extension for Guest/VM RISC-V: KVM: Add ONE_REG interface to enable/disable SBI extensions RISC-V: KVM: Alphabetize selects KVM: RISC-V: Retry fault if vma_lookup() results become invalid
2023-05-05Merge tag 'acpi-6.4-rc1-3' of ↵Linus Torvalds1-14/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Remove an ACPI backlight quirk for Lenovo ThinkPad W530, added during the 6.3 cycle, that turned out to do more harm than help (Hans de Goede)" * tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530
2023-05-05Merge tag 'thermal-6.4-rc1-3' of ↵Linus Torvalds2-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix a NULL pointer dereference in the Intel powerclamp driver introduced during the 6.3 cycle and update MAINTAINERS to match recent code changes. Specifics: - Fix NULL pointer access in the Intel powerclamp thermal driver that occurs on attempts to set the cooling device state to 0 in the default configuration (Srinivas Pandruvada) - Drop the stale MAINTAINERS entry for the Intel Menlow thermal driver that has been removed recently (Lukas Bulwahn)" * tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER thermal: intel: powerclamp: Fix NULL pointer access issue
2023-05-05Merge tag 'phy-fixes-6.4-1' of ↵Linus Torvalds1-8/+4
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: - Fix for mediatek driver warning for variable used uninitialized and for wrong pll math * tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: hdmi: mt8195: fix wrong pll calculus phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc
2023-05-05Merge tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds50-263/+415
Pull more drm fixes from Dave Airlie: "This is the fixes for the last couple of weeks for i915 and last 3 weeks for amdgpu, lots of them but pretty scattered around and all pretty small. amdgpu: - SR-IOV fixes - DCN 3.2 fixes - DC mclk handling fixes - eDP fixes - SubVP fixes - HDCP regression fix - DSC fixes - DC FP fixes - DCN 3.x fixes - Display flickering fix when switching between vram and gtt - Z8 power saving fix - Fix hang when skipping modeset - GPU reset fixes - Doorbell fix when resizing BARs - Fix spurious warnings in gmc - Locking fix for AMDGPU_SCHED IOCTL - SR-IOV fix - DCN 3.1.4 fix - DCN 3.2 fix - Fix job cleanup when CS is aborted i915: - skl pipe source size check - mtl transcoder mask fix - DSI power on sequence fix - GuC versioning corner case fix" * tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits) drm/amdgpu: drop redundant sched job cleanup when cs is aborted drm/amd/display: filter out invalid bits in pipe_fuses drm/amd/display: Change default Z8 watermark values drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV drm/amdgpu: add a missing lock for AMDGPU_SCHED drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini() drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini drm/amdgpu: Enable doorbell selfring after resize FB BAR drm/amdgpu: Use the default reset when loading or reloading the driver drm/amdgpu: Fix mode2 reset for sienna cichlid drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep() drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info drm/i915/guc: Actually return an error if GuC version range check fails drm/amd/display: Lowering min Z8 residency time drm/amd/display: fix flickering caused by S/G mode drm/amd/display: Set min_width and min_height capability for DCN30 drm/amd/display: Isolate remaining FPU code in DCN32 drm/amd/display: Update bounding box values for DCN321 drm/amd/display: Do not clear GPINT register when releasing DMUB from reset ...
2023-05-05ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence()Oswald Buddenhagen1-2/+2
We already know that `frames` is greater than zero, because we just checked it. So we don't need to check the loop condition on the first iteration. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-7-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-05ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence()Oswald Buddenhagen1-7/+24
Inline the remaining call of snd_pcm_playback_hw_avail(). This makes the top-up branch more congruent with the thresholded one, and allows simplifying the handling of the corner cases. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-6-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-05ALSA: pcm: playback silence - move silence variable updates to separate functionJaroslav Kysela1-20/+22
The code tracking the added samples in thresholded mode and the code tracking the just played samples in top-up mode are semantically identical, so factor it out to a common function to enhance readability. Co-developed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230505155244.2312199-5-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-05ALSA: pcm: playback silence - remove extra codeJaroslav Kysela1-2/+0
The removed condition handles de facto only one situation where runtime->silence_filled variable is equal to runtime->buffer_size, because this variable cannot go over the buffer size. This case is implicitly caught by the required comparison of the noise distance with the threshold. Suggested-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-4-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-05ALSA: pcm: fix playback silence - correct incremental silencingJaroslav Kysela1-7/+3
Commit 9a826ddba6e ("[ALSA] pcm core: fix silence_start calculations") came with exactly the right commit message, but the patch just made things broken in a different way: We'd fill at a too low address if the area was already partially zeroed, so we'd under-fill. This affected both thresholded mode (where it was somewhat less likely) and top-up mode (where it would be the case consistently). Co-developed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230505155244.2312199-3-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-05ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the ↵Jaroslav Kysela1-1/+9
threshold mode The snd_pcm_playback_hw_avail() function uses runtime->status->hw_ptr. Unfortunately, in case when we call this function from snd_pcm_update_hw_ptr0(), this variable contains the previous hardware pointer. Use the new_hw_ptr argument to calculate hw_avail (filled samples by the user space) to correct the threshold comparison. The new_hw_ptr argument may also be set to ULONG_MAX which means the initialization phase. In this case, use runtime->status->hw_ptr. Suggested-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-2-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-05ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()"Jaroslav Kysela3-40/+59
This reverts commit 9f656705c5faa18afb26d922cfc64f9fd103c38d. There was a regression (in the top-up mode). Unfortunately, the patch provided from the author of this commit is not easy to review. Keep the updated and new comments in headers. Also add a new comment that documents the missed API constraint which led to the regression. Reported-by: Jeff Chua <jeff.chua.linux@gmail.com> Link: https://lore.kernel.org/r/CAAJw_ZsbTVd3Es373x_wTNDF7RknGhCD0r+NKUSwAO7HpLAkYA@mail.gmail.com Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230505155244.2312199-1-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-05samples/bpf: Fix buffer overflow in tcp_baserttPengcheng Yang1-1/+1
Using sizeof(nv) or strlen(nv)+1 is correct. Fixes: c890063e4404 ("bpf: sample BPF_SOCKET_OPS_BASE_RTT program") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Link: https://lore.kernel.org/r/1683276658-2860-1-git-send-email-yangpc@wangsu.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-05-05bpf, docs: Update llvm_relocs.rst with typo fixesWill Hawkins1-8/+10
Correct a few typographical errors and fix some mistakes in examples. Signed-off-by: Will Hawkins <hawkinsw@obs.cr> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20230428023015.1698072-2-hawkinsw@obs.cr Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-05-05ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptopKai-Heng Feng1-0/+1
There's another laptop that needs the fixup to enable mute and micmute LEDs. So do it accordingly. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230505125925.543601-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-05-05Merge tag 'asoc-fix-v6.4-rc1' of ↵Takashi Iwai7-1013/+1072
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.4 A small set of fixes and device quirks that have come in during the merge window, the Qualcomm fix seems quite large but it's mainly code motion so looks larger than it is.
2023-05-05ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attachedSteven Rostedt (Google)3-4/+37
If a function had ever had IPMODIFY or DIRECT attached to it, where this is how live kernel patching and BPF overrides work, mark them and display an "M" in the enabled_functions and touched_functions files. This can be used for debugging. If a function had been modified and later there's a bug in the code related to that function, this can be used to know if the cause is possibly from a live kernel patch or a BPF program that changed the behavior of the code. Also update the documentation on the enabled_functions and touched_functions output, as it was missing direct callers and CALL_OPS. And include this new modify attribute. Link: https://lore.kernel.org/linux-trace-kernel/20230502213233.004e3ae4@gandalf.local.home Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-05-05MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVERLukas Bulwahn1-6/+0
Commit 2b6a7409ac39 ("thermal: intel: menlow: Get rid of this driver") removes the driver drivers/thermal/intel/intel_menlow.c, but misses to remove its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Remove the INTEL MENLOW THERMAL DRIVER section in MAINTAINERS. Fixes: 2b6a7409ac39 ("thermal: intel: menlow: Get rid of this driver") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-05-05MAINTAINERS: add Conor as a dt-bindings maintainerConor Dooley1-0/+1
Rob asked if I would be interested in helping with the dt-bindings maintenance, and since I am a glutton for punishment I accepted. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230504-renderer-alive-1c01d431b2a7@spud Signed-off-by: Rob Herring <robh@kernel.org>
2023-05-05wifi: mt7601u: delete dead code checking debugfs returnsWang Jikai1-2/+0
Smatch reports that: drivers/net/wireless/mediatek/mt7601u/debugfs.c:130 mt7601u_init_debugfs() warn: 'dir' is an error pointer or valid". Debugfs code is not supposed to need error checking so instead of changing this to if (IS_ERR()) the correct thing is to just delete the dead code. Signed-off-by: Wang Jikai <wangjikai@hust.edu.cn> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421092200.24456-1-wangjikai@hust.edu.cn
2023-05-05wifi: mwifiex: Use list_count_nodes()Christophe JAILLET2-17/+2
mwifiex_wmm_list_len() is the same as list_count_nodes(), so use the latter instead of hand writing it. Turn 'ba_stream_num' and 'ba_stream_max' in size_t to keep the same type as what is returned by list_count_nodes(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e77ed7f719787cb8836a93b6a6972f4147e40bc6.1682537509.git.christophe.jaillet@wanadoo.fr
2023-05-05wifi: rtw89: fix rtw89_read_chip_ver() for RTL8852B and RTL8851BDan Carpenter1-1/+1
The if statement is reversed so it will not record the chip version. This was detected using Smatch: drivers/net/wireless/realtek/rtw89/core.c:3593 rtw89_read_chip_ver() error: uninitialized symbol 'val'. Fixes: a6fb2bb84654 ("wifi: rtw89: read version of analog hardware") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e4d912a2-37f8-4068-8861-7b9494ae731b@kili.mountain
2023-05-05wifi: rtw89: 8851b: rfk: add IQKPing-Ke Shih3-0/+1117
IQ signal calibration is a very important calibration to yield good RF performance. We do this calibration only if we are going to run on AP channel. During scanning phase, without this calibration RF performance is still acceptable because it transmits with low data rate at this phase. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230424065242.17477-6-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: rfk: add DACKPing-Ke Shih3-0/+355
DACK (digital-to-analog converters calibration) is used to calibrate DAC to output good quality signals. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230424065242.17477-5-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: rfk: add RCKPing-Ke Shih2-0/+41
RCK is synchronize RC calibration. Driver triggers this calibration and sets the result to register. This calibration is needed once when interface is going to up. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230424065242.17477-4-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: rfk: add AACKPing-Ke Shih3-0/+49
Automatic amplitude control calibration (AACK) is the calibration to ensure the oscillator is biased for a constant output amplitude. We do this calibration if card does power on. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230424065242.17477-3-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: add set_channel_rf()Ping-Ke Shih2-0/+253
Add to set RF registers according to the channel we want to switch. The callers will be added afterward. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230424065242.17477-2-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: add DLE mem and HFC quotaPing-Ke Shih3-0/+53
Configure DLE (data link engine) memory size for operating modes. Similarly, HFC standing for HCI flow control is used to set quota according to operating modes, which are SCC or download firmware. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-9-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: add support WoWLAN to 8851BChih-Kang Chang2-1/+13
Add WoWLAN stub to 8851B, and decalre this chip can support magic packet and disconnect wakeup. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-8-pkshih@realtek.com
2023-05-05wifi: rtw89: change naming of BA CAM from V1 to V0_EXTPing-Ke Shih7-14/+21
BA CAM of 8852C has more entries and more fields of H2C, and needs initialization before using. Due to differences from 8852A/8852B, we name it as V1 before. However, real V1 of BA CAM is introduced now, so change it to V0_EXT to avoid confusing with firmware design. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-7-pkshih@realtek.com
2023-05-05wifi: rtw89: use chip_info::small_fifo_size to choose debug_maskPing-Ke Shih6-2/+7
Previously, 8852B has smaller FIFO size than others, so I use chip_id to choose debug_mask before. 8851B has similar design, so add a field to chip_info as a general expression. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-6-pkshih@realtek.com
2023-05-05wifi: rtw89: add CFO XTAL registers field to support 8851BChia-Yuan Li7-7/+38
Since CFO XTAL registers of 8851B is different from 8852A, add a chip_info field to define their difference. Other chips use another interface, so fill NULL to this field. Signed-off-by: Chia-Yuan Li <leo.li@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-5-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: add NCTL post tablePing-Ke Shih6-1/+11
NCTL (nano-controller) is used to assist RF calibration that sends commands to NCTL so it can reduce IO from driver. 8851B needs additional settings, so add a table to do things. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-4-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851be: add 8851BE PCI entry and fill PCI capabilitiesPing-Ke Shih1-0/+86
Add PCI entry to 8851BE with its device ID 10ec:b851, also fill PCI info according to its capabilities. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-3-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: add 8851B basic chip_infoPing-Ke Shih2-0/+116
8851B is a 1x1 80 MHz bandwidth chip working on 2/5 GHz. Add these basic information, and more settings will be added by functions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-2-pkshih@realtek.com
2023-05-05wifi: rtw89: scan offload wait for FW done ACKZong-Zhe Yang3-30/+58
The following are scan offload related H2C (host to chip) function types. * H2C_FUNC_ADD_SCANOFLD_CH * H2C_FUNC_SCANOFLD Before doing FW scan, we will continuously send multiple H2Cs with above types which are used to tell FW the scan configuration of this time. But, if FW doesn't handle one of these H2Cs well, the FW scan process might not run as expected and driver should notice it early. So, this commits makes scan offload related H2Cs wait for FW done ACK via rtw89_wait_for_cond() and rtw89_complete_cond(). And, we check the return code of these H2Cs from FW. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/a15f4bd594f71d7602ea67698b035805143700c9.camel@realtek.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 21:05:20 +0300