summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-03-21drm/exynos/mixer: fix MIXER shadow registry synchronisation codeAndrzej Hajda1-44/+66
MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4 to update internal state (shadow registers). Apparently the driver implements it incorrectly. The rule should be as follows: - do not request updating registers until previous request was finished, ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0. - before setting registers synchronisation on VSYNC should be turned off, ie. MXR_STATUS_SYNC_ENABLE should be reset, - after finishing MXR_STATUS_SYNC_ENABLE should be set again. The patch hopefully implements it correctly. Below sample kernel log from page fault caused by the bug: [ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800 [ 25.677888] ------------[ cut here ]------------ [ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450! [ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 25.693778] Modules linked in: [ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd #136 [ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264 [ 25.716470] LR is at lock_is_held_type+0x44/0x64 v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2019-03-21scsi: ibmvscsi: Fix empty event pool access during host removalTyrel Datwyler1-6/+16
The event pool used for queueing commands is destroyed fairly early in the ibmvscsi_remove() code path. Since, this happens prior to the call so scsi_remove_host() it is possible for further calls to queuecommand to be processed which manifest as a panic due to a NULL pointer dereference as seen here: PANIC: "Unable to handle kernel paging request for data at address 0x00000000" Context process backtrace: DSISR: 0000000042000000 ????Syscall Result: 0000000000000000 4 [c000000002cb3820] memcpy_power7 at c000000000064204 [Link Register] [c000000002cb3820] ibmvscsi_send_srp_event at d000000003ed14a4 5 [c000000002cb3920] ibmvscsi_send_srp_event at d000000003ed14a4 [ibmvscsi] ?(unreliable) 6 [c000000002cb39c0] ibmvscsi_queuecommand at d000000003ed2388 [ibmvscsi] 7 [c000000002cb3a70] scsi_dispatch_cmd at d00000000395c2d8 [scsi_mod] 8 [c000000002cb3af0] scsi_request_fn at d00000000395ef88 [scsi_mod] 9 [c000000002cb3be0] __blk_run_queue at c000000000429860 10 [c000000002cb3c10] blk_delay_work at c00000000042a0ec 11 [c000000002cb3c40] process_one_work at c0000000000dac30 12 [c000000002cb3cd0] worker_thread at c0000000000db110 13 [c000000002cb3d80] kthread at c0000000000e3378 14 [c000000002cb3e30] ret_from_kernel_thread at c00000000000982c The kernel buffer log is overfilled with this log: [11261.952732] ibmvscsi: found no event struct in pool! This patch reorders the operations during host teardown. Start by calling the SRP transport and Scsi_Host remove functions to flush any outstanding work and set the host offline. LLDD teardown follows including destruction of the event pool, freeing the Command Response Queue (CRQ), and unmapping any persistent buffers. The event pool destruction is protected by the scsi_host lock, and the pool is purged prior of any requests for which we never received a response. Finally, move the removal of the scsi host from our global list to the end so that the host is easily locatable for debugging purposes during teardown. Cc: <stable@vger.kernel.org> # v2.6.12+ Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-21scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaitonTyrel Datwyler1-0/+5
For each ibmvscsi host created during a probe or destroyed during a remove we either add or remove that host to/from the global ibmvscsi_head list. This runs the risk of concurrent modification. This patch adds a simple spinlock around the list modification calls to prevent concurrent updates as is done similarly in the ibmvfc driver and ipr driver. Fixes: 32d6e4b6e4ea ("scsi: ibmvscsi: add vscsi hosts to global list_head") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-20blkcg: Fix kernel-doc warningsBart Van Assche1-4/+5
Avoid that the following warnings are reported when building with W=1: block/blk-cgroup.c:1755: warning: Function parameter or member 'q' not described in 'blkcg_schedule_throttle' block/blk-cgroup.c:1755: warning: Function parameter or member 'use_memdelay' not described in 'blkcg_schedule_throttle' block/blk-cgroup.c:1779: warning: Function parameter or member 'blkg' not described in 'blkcg_add_delay' block/blk-cgroup.c:1779: warning: Function parameter or member 'now' not described in 'blkcg_add_delay' block/blk-cgroup.c:1779: warning: Function parameter or member 'delta' not described in 'blkcg_add_delay' Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-20blk-iolatency: #include "blk.h"Bart Van Assche1-0/+1
This patch avoids that the following warning is reported when building with W=1: block/blk-iolatency.c:734:5: warning: no previous prototype for 'blk_iolatency_init' [-Wmissing-prototypes] Cc: Josef Bacik <jbacik@fb.com> Fixes: d70675121546 ("block: introduce blk-iolatency io controller") # v4.19 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-20block: Unexport blk_mq_add_to_requeue_list()Bart Van Assche3-3/+2
This function is not used outside the block layer core. Hence unexport it. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-20block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for ↵Yufen Yu3-7/+12
unexpected value For q->poll_nsec == -1, means doing classic poll, not hybrid poll. We introduce a new flag BLK_MQ_POLL_CLASSIC to replace -1, which may make code much easier to read. Additionally, since val is an int obtained with kstrtoint(), val can be a negative value other than -1, so return -EINVAL for that case. Thanks to Damien Le Moal for some good suggestion. Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-20scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()Luo Jiaxing1-0/+6
We found out that for v2 hw, a SATA disk can not be written to after the system comes up. In commit ffb1c820b8b6 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()"), we introduced a path where we may issue an internal abort for a SATA device, but without following it with a softreset. We need to always follow an internal abort with a software reset, as per HW programming flow, so add this. Fixes: ffb1c820b8b6 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()") Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-20Merge tag 'arc-5.1-rc2' of ↵Linus Torvalds27-314/+399
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - unaligned access support for HS cores - Removed extra memory barrier around spinlock code - HSDK platform updates: enable dmac, reset - some more boot logging updates - misc minor fixes * tag 'arc-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arch: arc: Kconfig: pedantic formatting ARCv2: spinlock: remove the extra smp_mb before lock, after unlock ARC: unaligned: relax the check for gcc supporting -mno-unaligned-access ARC: boot log: cut down on verbosity ARCv2: boot log: refurbish HS core/release identification arc: hsdk_defconfig: Enable CONFIG_BLK_DEV_RAM ARC: u-boot args: check that magic number is correct ARC: perf: bpok condition only exists for ARCompact ARCv2: Add explcit unaligned access support (and ability to disable too) ARCv2: lib: introduce memcpy optimized for unaligned access ARC: [plat-hsdk]: Enable AXI DW DMAC support ARC: [plat-hsdk]: Add reset controller handle to manage USB reset ARC: DTB: [scripted] fix node name and address spelling
2019-03-20arm64: remove obsolete selection of MULTI_IRQ_HANDLERMatthias Kaehlcke1-1/+0
The arm64 config selects MULTI_IRQ_HANDLER, which was renamed to GENERIC_IRQ_MULTI_HANDLER by commit 4c301f9b6a94 ("ARM: Convert to GENERIC_IRQ_MULTI_HANDLER"). The 'new' option is already selected, so just remove the obsolete entry. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-20rbd: drop wait_for_latest_osdmap()Ilya Dryomov1-18/+2
Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2019-03-20libceph: wait for latest osdmap in ceph_monc_blacklist_add()Ilya Dryomov3-1/+28
Because map updates are distributed lazily, an OSD may not know about the new blacklist for quite some time after "osd blacklist add" command is completed. This makes it possible for a blacklisted but still alive client to overwrite a post-blacklist update, resulting in data corruption. Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using the post-blacklist epoch for all post-blacklist requests ensures that all such requests "wait" for the blacklist to come into force on their respective OSDs. Cc: stable@vger.kernel.org Fixes: 6305a3b41515 ("libceph: support for blacklisting clients") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2019-03-20powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurationsBen Hutchings1-1/+1
MAX_PHYSMEM_BITS only needs to be defined if CONFIG_SPARSEMEM is enabled, and that was the case before commit 4ffe713b7587 ("powerpc/mm: Increase the max addressable memory to 2PB"). On 32-bit systems, where CONFIG_SPARSEMEM is not enabled, we now define it as 46. That is larger than the real number of physical address bits, and breaks calculations in zsmalloc: mm/zsmalloc.c:130:49: warning: right shift count is negative MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ^~ ... mm/zsmalloc.c:253:21: error: variably modified 'size_class' at file scope struct size_class *size_class[ZS_SIZE_CLASSES]; ^~~~~~~~~~ Fixes: 4ffe713b7587 ("powerpc/mm: Increase the max addressable memory to 2PB") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-20drm/vmwgfx: Don't double-free the mode stored in par->set_modeThomas Zimmermann1-9/+3
When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd twice. The first free is in vmw_fb_kms_detach(), the second is near the end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code only works correctly if the mode doesn't actually change. Removing 'old_mode' in favor of using par->set_mode directly fixes the problem. Cc: <stable@vger.kernel.org> Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Deepak Rawat <drawat@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-03-20drm/vmwgfx: Return 0 when gmrid::get_node runs out of ID'sDeepak Rawat1-1/+1
If it's not a system error and get_node implementation accommodate the buffer object then it should return 0 with memm::mm_node set to NULL. v2: Test for id != -ENOMEM instead of id == -ENOSPC. Cc: <stable@vger.kernel.org> Fixes: 4eb085e42fde ("drm/vmwgfx: Convert to new IDA API") Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-03-20PM / Domains: Avoid a potential deadlockJiada Wang1-7/+6
Lockdep warns that prepare_lock and genpd->mlock can cause a deadlock the deadlock scenario is like following: First thread is probing cs2000 cs2000_probe() clk_register() __clk_core_init() clk_prepare_lock() ----> acquires prepare_lock cs2000_recalc_rate() i2c_smbus_read_byte_data() rcar_i2c_master_xfer() dma_request_chan() rcar_dmac_of_xlate() rcar_dmac_alloc_chan_resources() pm_runtime_get_sync() __pm_runtime_resume() rpm_resume() rpm_callback() genpd_runtime_resume() ----> acquires genpd->mlock Second thread is attaching any device to the same PM domain genpd_add_device() genpd_lock() ----> acquires genpd->mlock cpg_mssr_attach_dev() of_clk_get_from_provider() __of_clk_get_from_provider() __clk_create_clk() clk_prepare_lock() ----> acquires prepare_lock Since currently no PM provider access genpd's critical section in .attach_dev, and .detach_dev callbacks, so there is no need to protect these two callbacks with genpd->mlock. This patch avoids a potential deadlock by moving out .attach_dev and .detach_dev from genpd->mlock, so that genpd->mlock won't be held when prepare_lock is acquired in .attach_dev and .detach_dev Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-20ACPI / utils: Drop reference in test for device presenceAndy Shevchenko1-0/+1
When commit 8661423eea1a ("ACPI / utils: Add new acpi_dev_present helper") introduced acpi_dev_present(), it missed the fact that bus_find_device() took a reference on the device found by it and the callers of acpi_dev_present() don't drop that reference. Drop the reference on the device in acpi_dev_present(). Fixes: 8661423eea1a ("ACPI / utils: Add new acpi_dev_present helper") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-19drm/amdgpu: fix invalid use of change_bitChristian König1-1/+1
We only need to clear the bit in a 32bit integer. This fixes a crah on ARM64 and PPC64LE caused by "drm/amdgpu: update the vm invalidation engine layout V2" Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amdgpu: revert "cleanup setting bulk_movable"Christian König1-0/+2
This reverts commit 8466cc61da89d33441e0d7a98de1ba98697cd465. It can trigger a reference counter bug in TTM. Need to investigate further, but for now revert the offending change. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19scsi: qla2xxx: Fix NULL pointer crash due to stale CPUIDHimanshu Madhani1-1/+1
This patch fixes crash due to NULL pointer derefrence because CPU pointer is not set and used by driver. Instead, driver is passes CPU as tag via ha->isp_ops->{lun_reset|target_reset} [ 30.160780] qla2xxx [0000:a0:00.1]-8038:9: Cable is unplugged... [ 69.984045] qla2xxx [0000:a0:00.0]-8009:8: DEVICE RESET ISSUED nexus=8:0:0 cmd=00000000b0d62f46. [ 69.992849] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 70.000680] PGD 0 P4D 0 [ 70.003232] Oops: 0000 [#1] SMP PTI [ 70.006727] CPU: 2 PID: 6714 Comm: sg_reset Kdump: loaded Not tainted 4.18.0-67.el8.x86_64 #1 [ 70.015258] Hardware name: NEC Express5800/T110j [N8100-2758Y]/MX32-PH0-NJ, BIOS F11 02/13/2019 [ 70.024016] RIP: 0010:blk_mq_rq_cpu+0x9/0x10 [ 70.028315] Code: 01 58 01 00 00 48 83 c0 28 48 3d 80 02 00 00 75 ab c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 08 <8b> 40 40 c3 0f 1f 00 0f 1f 44 00 00 48 83 ec 10 48 c7 c6 20 6e 7c [ 70.047087] RSP: 0018:ffff99a481487d58 EFLAGS: 00010246 [ 70.052322] RAX: 0000000000000000 RBX: ffffffffc041b08b RCX: 0000000000000000 [ 70.059466] RDX: 0000000000000000 RSI: ffff8d10b6b16898 RDI: ffff8d10b341e400 [ 70.066615] RBP: ffffffffc03a6bd0 R08: 0000000000000415 R09: 0000000000aaaaaa [ 70.073765] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d10b341e528 [ 70.080914] R13: ffff8d10aadefc00 R14: ffff8d0f64efa998 R15: ffff8d0f64efa000 [ 70.088083] FS: 00007f90a201e540(0000) GS:ffff8d10b6b00000(0000) knlGS:0000000000000000 [ 70.096188] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 70.101959] CR2: 0000000000000040 CR3: 0000000268886005 CR4: 00000000003606e0 [ 70.109127] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 70.116277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 70.123425] Call Trace: [ 70.125896] __qla2xxx_eh_generic_reset+0xb1/0x220 [qla2xxx] [ 70.131572] scsi_ioctl_reset+0x1f5/0x2a0 [ 70.135600] scsi_ioctl+0x18e/0x397 [ 70.139099] ? sd_ioctl+0x7c/0x100 [sd_mod] [ 70.143287] blkdev_ioctl+0x32b/0x9f0 [ 70.146954] ? __check_object_size+0xa3/0x181 [ 70.151323] block_ioctl+0x39/0x40 [ 70.154735] do_vfs_ioctl+0xa4/0x630 [ 70.158322] ? syscall_trace_enter+0x1d3/0x2c0 [ 70.162769] ksys_ioctl+0x60/0x90 [ 70.166104] __x64_sys_ioctl+0x16/0x20 [ 70.169859] do_syscall_64+0x5b/0x1b0 [ 70.173532] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 70.178587] RIP: 0033:0x7f90a1b3445b [ 70.182183] Code: 0f 1e fa 48 8b 05 2d aa 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd a9 2c 00 f7 d8 64 89 01 48 [ 70.200956] RSP: 002b:00007fffdca88b68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 70.208535] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f90a1b3445b [ 70.215684] RDX: 00007fffdca88b84 RSI: 0000000000002284 RDI: 0000000000000003 [ 70.222833] RBP: 00007fffdca88ca8 R08: 00007fffdca88b84 R09: 0000000000000000 [ 70.229981] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffdca88b84 [ 70.237131] R13: 0000000000000000 R14: 000055ab09b0bd28 R15: 0000000000000000 [ 70.244284] Modules linked in: nft_chain_route_ipv4 xt_CHECKSUM nft_chain_nat_ipv4 ipt_MASQUERADE nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c ipt_REJECT nf_reject_ipv4 nft_counter nft_compat tun bridge stp llc nf_tables nfnetli nk devlink sunrpc vfat fat intel_rapl intel_pmc_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm wmi_bmof iTCO_wdt iTCO_ vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif intel_cstate intel_uncore intel_rapl_perf ipmi_si jo ydev pcspkr ipmi_devintf sg wmi ipmi_msghandler video acpi_power_meter acpi_pad mei_me i2c_i801 mei ip_tables ext4 mbcache jbd2 sr_mod cd rom sd_mod qla2xxx ast i2c_algo_bit drm_kms_helper nvme_fc syscopyarea sysfillrect uas sysimgblt fb_sys_fops nvme_fabrics ttm [ 70.314805] usb_storage nvme_core crc32c_intel scsi_transport_fc ahci drm libahci tg3 libata megaraid_sas pinctrl_cannonlake pinctrl_ intel [ 70.327335] CR2: 0000000000000040 Fixes: 9cf2bab630765 ("block: kill request ->cpu member") Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qla2xxx: Fix FC-AL connection target discoveryQuinn Tran1-0/+7
Commit 7f147f9bfd44 ("scsi: qla2xxx: Fix N2N target discovery with Local loop") fixed N2N target discovery for local loop. However, same code is used for FC-AL discovery as well. Added check to make sure we are bypassing area and domain check only in N2N topology for target discovery. Fixes: 7f147f9bfd44 ("scsi: qla2xxx: Fix N2N target discovery with Local loop") Cc: stable@vger.kernel.org # 5.0+ Signed-off-by: Quinn Tran <qtran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19Merge tag 'tag-chrome-platform-fixes-for-v5.1-rc2' of ↵Linus Torvalds2-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform fixes from Benson Leung: "Two fixes: - Fix locking and close a potential race condition in the new wilco_ec driver. - Fix a warning in cros_ec_debugfs on systems that do not support console logging, such as the Asus C201" * tag 'tag-chrome-platform-fixes-for-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_debugfs: cancel/schedule logging work only if supported platform/chrome: Fix locking pattern in wilco_ec_mailbox()
2019-03-19scsi: core: Avoid that a kernel warning appears during system resumeBart Van Assche1-2/+4
Since scsi_device_quiesce() skips SCSI devices that have another state than RUNNING, OFFLINE or TRANSPORT_OFFLINE, scsi_device_resume() should not complain about SCSI devices that have been skipped. Hence this patch. This patch avoids that the following warning appears during resume: WARNING: CPU: 3 PID: 1039 at blk_clear_pm_only+0x2a/0x30 CPU: 3 PID: 1039 Comm: kworker/u8:49 Not tainted 5.0.0+ #1 Hardware name: LENOVO 4180F42/4180F42, BIOS 83ET75WW (1.45 ) 05/10/2013 Workqueue: events_unbound async_run_entry_fn RIP: 0010:blk_clear_pm_only+0x2a/0x30 Call Trace: ? scsi_device_resume+0x28/0x50 ? scsi_dev_type_resume+0x2b/0x80 ? async_run_entry_fn+0x2c/0xd0 ? process_one_work+0x1f0/0x3f0 ? worker_thread+0x28/0x3c0 ? process_one_work+0x3f0/0x3f0 ? kthread+0x10c/0x130 ? __kthread_create_on_node+0x150/0x150 ? ret_from_fork+0x1f/0x30 Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Martin Steigerwald <martin@lichtvoll.de> Cc: <stable@vger.kernel.org> Reported-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Tested-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Fixes: 3a0a529971ec ("block, scsi: Make SCSI quiesce and resume work reliably") # v4.15 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: core: Also call destroy_rcu_head() for passthrough requestsBart Van Assche1-1/+8
cmd->rcu is initialized by scsi_initialize_rq(). For passthrough requests, blk_get_request() calls scsi_initialize_rq(). For filesystem requests, scsi_init_command() calls scsi_initialize_rq(). Make sure that destroy_rcu_head() is called for passthrough requests. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19platform/chrome: cros_ec_debugfs: cancel/schedule logging work only if supportedGuenter Roeck1-3/+7
The following traceback was reported on ASUS C201, which does not support console logging. ------------[ cut here ]------------ WARNING: CPU: 2 PID: 361 at kernel/workqueue.c:3030 __flush_work+0x38/0x154 Modules linked in: snd_soc_hdmi_codec cros_ec_debugfs cros_ec_sysfs uvcvideo dw_hdmi_cec dw_hdmi_i2s_audio videobuf2_vmalloc cfg80211 gpio_charger rk_crypto rfkill videobuf2_memops videobuf2_v4l2 des_generic videobuf2_common ofpart m25p80 spi_nor tpm_i2c_infineon sbs_battery mtd tpm joydev cros_ec_dev coreboot_table evdev mousedev ip_tables x_tables [last unloaded: brcmutil] CPU: 2 PID: 361 Comm: systemd-sleep Not tainted 5.1.0-rc1-1-ARCH+ #1 Hardware name: Rockchip (Device Tree) [<c020e4b0>] (unwind_backtrace) from [<c020ac18>] (show_stack+0x10/0x14) [<c020ac18>] (show_stack) from [<c07a3e04>] (dump_stack+0x7c/0x9c) [<c07a3e04>] (dump_stack) from [<c0222748>] (__warn+0xd0/0xec) [<c0222748>] (__warn) from [<c022279c>] (warn_slowpath_null+0x38/0x44) [<c022279c>] (warn_slowpath_null) from [<c02365d0>] (__flush_work+0x38/0x154) [<c02365d0>] (__flush_work) from [<c023786c>] (__cancel_work_timer+0x114/0x1a4) [<c023786c>] (__cancel_work_timer) from [<bf33233c>] (cros_ec_debugfs_suspend+0x14/0x1c [cros_ec_debugfs]) [<bf33233c>] (cros_ec_debugfs_suspend [cros_ec_debugfs]) from [<c056a888>] (dpm_run_callback+0x64/0xcc) [<c056a888>] (dpm_run_callback) from [<c056ad2c>] (__device_suspend+0x174/0x3a8) [<c056ad2c>] (__device_suspend) from [<c056b9e0>] (dpm_suspend+0x174/0x1e0) [<c056b9e0>] (dpm_suspend) from [<c026b3e0>] (suspend_devices_and_enter+0x6c/0x50c) [<c026b3e0>] (suspend_devices_and_enter) from [<c026ba8c>] (pm_suspend+0x20c/0x274) [<c026ba8c>] (pm_suspend) from [<c026a628>] (state_store+0x54/0x88) [<c026a628>] (state_store) from [<c03cd2d0>] (kernfs_fop_write+0x114/0x180) [<c03cd2d0>] (kernfs_fop_write) from [<c035d48c>] (__vfs_write+0x1c/0x154) [<c035d48c>] (__vfs_write) from [<c035f9e8>] (vfs_write+0xb8/0x198) [<c035f9e8>] (vfs_write) from [<c035fbc0>] (ksys_write+0x3c/0x74) [<c035fbc0>] (ksys_write) from [<c0201000>] (ret_fast_syscall+0x0/0x4c) Exception stack(0xe9365fa8 to 0xe9365ff0) 5fa0: 00000004 beef8b28 00000004 beef8b28 00000004 00000000 5fc0: 00000004 beef8b28 02319170 00000004 beef8b28 00000004 b6f3d900 beef8b74 5fe0: 0000006c beef8a98 b6c0adac b6c66534 ---[ end trace f4ee5df14e8ea0ec ]--- If console logging is not supported, the work structure is never initialized, resulting in the traceback. Calling cancel/schedule functions conditionally fixes the problem. While at it, also fix error handling in the probe function. Reported-by: Urja Rannikko <urjaman@gmail.com> Cc: Urja Rannikko <urjaman@gmail.com> Fixes: 6fce0a2cf5a05 ("mfd / platform: cros_ec: Move debugfs attributes to its own driver") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Benson Leung <bleung@chromium.org>
2019-03-19Merge tag 'mips_fixes_5.1_1' of ↵Linus Torvalds5-17/+13
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A small batch of MIPS fixes for 5.1: - An interrupt masking fix for Loongson-based Lemote 2F systems (fixing a regression from v3.19) - A relocation fix for configurations in which the devicetree is stored in an ELF section (fixing a regression from v4.7) - Fix jump labels for MIPSr6 kernels where they previously could inadvertently place a control transfer instruction in a forbidden slot & take unexpected exceptions (fixing MIPSr6 support added in v4.0) - Extend an existing USB power workaround for the Netgear WNDR3400 to v2 boards in addition to the v3 ones that already used it - Remove the custom MIPS32 definition of __kernel_fsid_t to make it consistent with MIPS64 & every other architecture, in particular resolving issues for code which tries to print the val field whose type previously differed (though had identical memory layout)" * tag 'mips_fixes_5.1_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Remove custom MIPS32 __kernel_fsid_t type mips: bcm47xx: Enable USB power on Netgear WNDR3400v2 MIPS: Fix kernel crash for R6 in jump label branch function MIPS: Ensure ELF appended dtb is relocated mips: loongson64: lemote-2f: Add IRQF_NO_SUSPEND to "cascade" irqaction.
2019-03-19tools/power turbostat: return the exit status of a commandDavid Arcari1-0/+3
turbostat failed to return a non-zero exit status even though the supplied command (turbostat <command>) failed. Currently when turbostat forks a command it returns zero instead of the actual exit status of the command. Modify the code to return the exit status. Signed-off-by: David Arcari <darcari@redhat.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-19drivers: base: swnode: Make two functions staticYueHaibing1-2/+2
Fix sparse warning: drivers/base/swnode.c:475:22: warning: symbol 'software_node_get_parent' was not declared. Should it be static? drivers/base/swnode.c:484:22: warning: symbol 'software_node_get_next_child' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-19blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctxDongli Zhang1-1/+0
There is no usage of 'nr_expired'. The 'nr_expired' was introduced by commit 1d9bd5161ba3 ("blk-mq: replace timeout synchronization with a RCU and generation based scheme"). Its usage was removed since commit 12f5b9314545 ("blk-mq: Remove generation seqeunce"). Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-19arm64: kpti: Whitelist HiSilicon Taishan v110 CPUsHanjun Guo1-0/+1
HiSilicon Taishan v110 CPUs didn't implement CSV3 field of the ID_AA64PFR0_EL1 and are not susceptible to Meltdown, so whitelist the MIDR in kpti_safe_list[] table. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Zhangshaokun <zhangshaokun@hisilicon.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64: Add MIDR encoding for HiSilicon Taishan CPUsHanjun Guo1-0/+4
Adding the MIDR encodings for HiSilicon Taishan v110 CPUs, which is used in Kunpeng ARM64 server SoCs. TSV110 is the abbreviation of Taishan v110. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Zhangshaokun <zhangshaokun@hisilicon.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64/stacktrace: Export save_stack_trace_regs()William Cohen1-0/+1
The ARM64 implements the save_stack_trace_regs function, but it is unusable for any diagnostic tooling compiled as a kernel module due the missing EXPORT_SYMBOL_GPL for the function. Export save_stack_trace_regs() to align with other architectures such as s390, openrisc, and powerpc. This is similar to the ARM64 export of save_stack_trace_tsk() added in git commit e27c7fa015d6. Signed-off-by: William Cohen <wcohen@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64: apply workaround on A64FX v1r0Mark Rutland1-1/+1
Fujitsu erratum 010001 applies to A64FX v0r0 and v1r0, and we try to handle either by masking MIDR with MIDR_FUJITSU_ERRATUM_010001_MASK before comparing it to MIDR_FUJITSU_ERRATUM_010001. Unfortunately, MIDR_FUJITSU_ERRATUM_010001 is constructed incorrectly using MIDR_VARIANT(), which is intended to extract the variant field from MIDR_EL1, rather than generate the field in-place. This results in MIDR_FUJITSU_ERRATUM_010001 being all-ones, and we only match A64FX v0r0. This patch uses MIDR_CPU_VAR_REV() to generate an in-place mask for the variant field, ensuring the we match both v0r0 and v1r0. Fixes: 3e32131abc311a5c ("arm64: Add workaround for Fujitsu A64FX erratum 010001") Reported-by: "Okamoto, Takayuki" <tokamoto@jp.fujitsu.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [catalin.marinas@arm.com: fixed the patch author] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64: kprobes: Use arch_populate_kprobe_blacklist()Masami Hiramatsu1-19/+30
Use arch_populate_kprobe_blacklist() instead of arch_within_kprobe_blacklist() so that we can see the full blacklisted symbols under the debugfs. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> [catalin.marinas@arm.com: Add arch_populate_kprobe_blacklist() comment] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64: kprobes: Move exception_text check in blacklistMasami Hiramatsu1-4/+2
Move exception/irqentry text address check in blacklist, since those are symbol based rejection. If we prohibit probing on the symbols in exception_text, those should be blacklisted. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64: kprobes: Remove unneeded RODATA checkMasami Hiramatsu1-6/+0
Remove unneeded RODATA check from arch_prepare_kprobe(). Since check_kprobe_address_safe() already ensured that the probe address is in kernel text, we don't need to check whether the address in RODATA or not. That must be always false. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19arm64: kprobes: Move extable address check into arch_prepare_kprobe()Masami Hiramatsu1-2/+5
Move extable address check into arch_prepare_kprobe() from arch_within_kprobe_blacklist(). The blacklist is exposed via debugfs as a list of symbols. The extable entries are smaller, so must be filtered out by arch_prepare_kprobe(). Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-19fanotify: Allow copying of file handle to userspaceJan Kara1-1/+11
When file handle is embedded inside fanotify_event and usercopy checks are enabled, we get a warning like: Bad or missing usercopy whitelist? Kernel memory exposure attempt detected from SLAB object 'fanotify_event' (offset 40, size 8)! WARNING: CPU: 1 PID: 7649 at mm/usercopy.c:78 usercopy_warn+0xeb/0x110 mm/usercopy.c:78 Annotate handling in fanotify_event properly to mark copying it to userspace is fine. Reported-by: syzbot+2c49971e251e36216d1f@syzkaller.appspotmail.com Fixes: a8b13aa20afb ("fanotify: enable FAN_REPORT_FID init flag") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2019-03-19ALSA: hda - Enforces runtime_resume after S3 and S4 for each codecHui Wang1-3/+17
Recently we found the audio jack detection stop working after suspend on many machines with Realtek codec. Sometimes the audio selection dialogue didn't show up after users plugged headhphone/headset into the headset jack, sometimes after uses plugged headphone/headset, then click the sound icon on the upper-right corner of gnome-desktop, it also showed the speaker rather than the headphone. The root cause is that before suspend, the codec already call the runtime_suspend since this codec is not used by any apps, then in resume, it will not call runtime_resume for this codec. But for some realtek codec (so far, alc236, alc255 and alc891) with the specific BIOS, if it doesn't run runtime_resume after suspend, all codec functions including jack detection stop working anymore. This problem existed for a long time, but it was not exposed, that is because when problem happens, if users play sound or open sound-setting to check audio device, this will trigger calling to runtime_resume (via snd_hda_power_up), then the codec starts working again before users notice this problem. Since we don't know how many codec and BIOS combinations have this problem, to fix it, let the driver call runtime_resume for all codecs in pm_resume, maybe for some codecs, this is not needed, but it is harmless. After a codec is runtime resumed, if it is not used by any apps, it will be runtime suspended soon and furthermore we don't run suspend frequently, this change will not add much power consumption. Fixes: cc72da7d4d06 ("ALSA: hda - Use standard runtime PM for codec power-save control") Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-19ALSA: hda - Don't trigger jackpoll_work in azx_resumeHui Wang1-4/+4
The commit 3baffc4a84d7 (ALSA: hda/intel: Refactoring PM code) changed the behaviour of azx_resume(), it triggers the jackpoll_work after applying this commit. This change introduced a new issue, all codecs are runtime active after S3, and will not call runtime_suspend() automatically. The root cause is the jackpoll_work calls snd_hda_power_up/down_pm, and it calls up_pm before snd_hdac_enter_pm is called, while calls the down_pm in the middle of enter_pm and leave_pm is called. This makes the dev->power.usage_count unbalanced after S3. To fix it, let azx_resume() don't trigger jackpoll_work as before it did. Fixes: 3baffc4a84d7 ("ALSA: hda/intel: Refactoring PM code") Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-18drm/i915: Sanity check mmap length against object sizeChris Wilson1-6/+9
We assumed that vm_mmap() would reject an attempt to mmap past the end of the filp (our object), but we were wrong. Applications that tried to use the mmap beyond the end of the object would be greeted by a SIGBUS. After this patch, those applications will be told about the error on creating the mmap, rather than at a random moment on later access. Reported-by: Antonio Argenziano <antonio.argenziano@intel.com> Testcase: igt/gem_mmap/bad-size Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Antonio Argenziano <antonio.argenziano@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190314075829.16838-1-chris@chris-wilson.co.uk (cherry picked from commit 794a11cb67201ad1bb61af510bb8460280feb3f3) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-03-18drm/i915: Fix off-by-one in reporting hanging processChris Wilson1-1/+1
ffs() is 1-indexed, but we want to use it as an index into an array, so use __ffs() instead. Fixes: eb8d0f5af4ec ("drm/i915: Remove GPU reset dependence on struct_mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190315163933.19352-1-chris@chris-wilson.co.uk (cherry picked from commit 9073e5b26743b8b675cc44a9c0c8f8c3d584e1c0) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-03-18drm/i915/bios: assume eDP is present on port A when there is no VBTThomas Preston1-0/+1
We rely on VBT DDI port info for eDP detection on GEN9 platforms and above. This breaks GEN9 platforms which don't have VBT because port A eDP now defaults to false. Fix this by defaulting to true when VBT is missing. Fixes: a98d9c1d7e9b ("drm/i915/ddi: Rely on VBT DDI port info for eDP detection") Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190306200618.17405-1-thomas.preston@codethink.co.uk (cherry picked from commit 2131bc0ced6088648e47f126566c3da58b07e4ef) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-03-18scsi: iscsi: flush running unbind operations when removing a sessionMaurizio Lombardi1-0/+2
In some cases, the iscsi_remove_session() function is called while an unbind_work operation is still running. This may cause a situation where sysfs objects are removed in an incorrect order, triggering a kernel warning. [ 605.249442] ------------[ cut here ]------------ [ 605.259180] sysfs group 'power' not found for kobject 'target2:0:0' [ 605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80 [ 605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi [ 605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1 [ 605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014 [ 605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi] [ 605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55 [ 606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286 [ 606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818 [ 606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007 [ 606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838 [ 606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000 [ 606.824707] FS: 0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000 [ 607.018333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0 [ 607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 607.524236] Call Trace: [ 607.530591] device_del+0x56/0x350 [ 607.624393] ? ata_tlink_match+0x30/0x30 [libata] [ 607.727805] ? attribute_container_device_trigger+0xb4/0xf0 [ 607.829911] scsi_target_reap_ref_release+0x39/0x50 [ 607.928572] scsi_remove_target+0x1a2/0x1d0 [ 608.017350] __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi] [ 608.117435] process_one_work+0x1a7/0x360 [ 608.132917] worker_thread+0x30/0x390 [ 608.222900] ? pwq_unbound_release_workfn+0xd0/0xd0 [ 608.323989] kthread+0x112/0x130 [ 608.418318] ? kthread_bind+0x30/0x30 [ 608.513821] ret_from_fork+0x35/0x40 [ 608.613909] ---[ end trace 0b98c310c8a6138c ]--- Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18rbd: set io_min, io_opt and discard_granularity to alloc_sizeIlya Dryomov1-4/+4
Now that we have alloc_size that controls our discard behavior, it doesn't make sense to have these set to object (set) size. alloc_size defaults to 64k, but because discard_granularity is likely 4M, only ranges that are equal to or bigger than 4M can be considered during fstrim. A smaller io_min is also more likely to be met, resulting in fewer deferred writes on bluestore OSDs. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2019-03-18platform/chrome: Fix locking pattern in wilco_ec_mailbox()Nick Crews1-1/+1
Before, ec->data_buffer could be written to from multiple contexts at the same time. Since the ec is shared data, it needs to be inside the mutex as well. Fixes: 7b3d4f44abf0 ("platform/chrome: Add new driver for Wilco EC") Signed-off-by: Nick Crews <ncrews@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Benson Leung <bleung@chromium.org>
2019-03-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds7-45/+89
Pull rdma fixes from Jason Gunthorpe: "Several driver bug fixes post in the last three weeks - first part of a race condition fix in mlx4 with CATAS errors - bad interaction with FW causing resource leaks in the mlx5 DCT flow - bad reporting of link speed/width in new mlx5 devices - user triggable OOPS in i40iw" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: i40iw: Avoid panic when handling the inetdev event IB/mlx5: Fix mapping of link-mode to IB width and speed IB/mlx5: Use mlx5 core to create/destroy a DEVX DCT net/mlx5: Fix DCT creation bad flow IB/mlx4: Fix race condition between catas error reset and aliasguid flows
2019-03-18block: add BIO_NO_PAGE_REF flagJens Axboe4-29/+39
If bio_iov_iter_get_pages() is called on an iov_iter that is flagged with NO_REF, then we don't need to add a page reference for the pages that we add. Add BIO_NO_PAGE_REF to track this in the bio, so IO completion knows not to drop a reference to these pages. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-18iov_iter: add ITER_BVEC_FLAG_NO_REF flagJens Axboe2-5/+22
For ITER_BVEC, if we're holding on to kernel pages, the caller doesn't need to grab a reference to the bvec pages, and drop that same reference on IO completion. This is essentially safe for any ITER_BVEC, but some use cases end up reusing pages and uncondtionally dropping a page reference on completion. And example of that is sendfile(2), that ends up being a splice_in + splice_out on the pipe pages. Add a flag that tells us it's fine to not grab a page reference to the bvec pages, since that caller knows not to drop a reference when it's done with the pages. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-18io_uring: mark me as the maintainerJens Axboe1-0/+10
And io_uring as maintained in general. Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 00:44:54 +0300