summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-10-16ARM: dts: stm32: Add DMAMUX support for STM32H743 SoCPierre-Yves MORDRET1-0/+12
This patch adds DMAMUX support for STM32H743 SoC. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-10-16ARM: dts: stm32: Add lptimer definitions to stm32h743Fabrice Gasnier1-0/+103
Add lptimer definitions, depending on features they provide: - lptimer1 & 2 can act as PWM, trigger and encoder/counter - lptimer3 can act as PWM and trigger - lptimer4 & 5 can act as PWM Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-10-16ARM: dts: stm32: add vrefbuf to stm32h743Fabrice Gasnier1-0/+9
Add STM32H743 VREFBUF (Voltage Reference Buffer) definition. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-10-16ARM: dts: stm32: Add I2C1 support for STM32F746 eval boardPierre-Yves MORDRET1-0/+8
This patch adds I2C1 support for STM32F746 eval board Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-10-16ARM: dts: r7s72100: Add clock for CA9 CPU coreGeert Uytterhoeven1-0/+1
Improve hardware description by adding a clock property to the device node corresponding to the CA9 CPU core. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16dt-bindings: clk: r7s72100: Add missing I and G clocksGeert Uytterhoeven1-0/+2
Add the missing definitions for the I (CPU) and G (Image Processing) clocks, so these clocks can be referred to from device nodes in DT. Note that these clocks are already fully supported otherwise (DT bindings, Linux driver, r7s72100.dtsi), they were just omitted from the header file. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: sh73a0: Add clocks for CA9 CPU coresGeert Uytterhoeven1-0/+2
Improve hardware description by adding clocks properties to the device nodes corresponding to the CA9 CPU cores. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7794: Add missing clock for secondary CA7 CPU coreGeert Uytterhoeven1-0/+1
Currently only the primary CPU in the CA7 cluster has a clocks property, while the secondary CPU core is driven by the same clock. Add the missing clocks property to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7793: Add missing clock for secondary CA15 CPU coreGeert Uytterhoeven1-0/+1
Currently only the primary CPU in the CA15 cluster has a clocks property, while the secondary CPU core is driven by the same clock. Add the missing clocks property to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7792: Add missing clock for secondary CA15 CPU coreGeert Uytterhoeven1-0/+1
Currently only the primary CPU in the CA15 cluster has a clocks property, while the secondary CPU core is driven by the same clock. Add the missing clocks property to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7791: Add missing clock for secondary CA15 CPU coreGeert Uytterhoeven1-0/+1
Currently only the primary CPU in the CA15 cluster has a clocks property, while the secondary CPU core is driven by the same clock. Add the missing clocks property to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7790: Add clocks for CA7 CPU coresGeert Uytterhoeven1-0/+4
Currently only the CPU cores in the CA15 cluster have clocks properties. Add the missing clocks properties for the CPU cores in the CA7 cluster to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7790: Add missing clocks for secondary CA15 CPU coresGeert Uytterhoeven1-0/+3
Currently only the primary CPU in the CA15 cluster has a clocks property, while the secondary CPU cores are driven by the same clock. Add the missing clocks properties to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7779: Add clocks for CA9 CPU coresGeert Uytterhoeven1-0/+4
Improve hardware description by adding clocks properties to the device nodes corresponding to the CA9 CPU cores. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7778: Add clock for CA9 CPU coreGeert Uytterhoeven1-0/+1
Improve hardware description by adding a clock property to the device node corresponding to the CA9 CPU core. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7743: Add missing clock for secondary CA15 CPU coreGeert Uytterhoeven1-0/+1
Currently only the primary CPU in the CA15 cluster has a clocks property, while the secondary CPU core is driven by the same clock. Add the missing clocks property to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a73a4: Add clock for CA15 CPU0 coreGeert Uytterhoeven1-0/+1
Improve hardware description by adding a clocks property to the device node corresponding to the primary CA15 CPU core, which is for now the only one described. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16arm64: dts: r8a7796: Use R-Car GPIO Gen3 fallback compat stringSimon Horman1-8/+8
Use newly added R-Car GPIO Gen3 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of the r8a7796 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-16arm64: dts: r8a7795: Use R-Car GPIO Gen3 fallback compat stringSimon Horman1-8/+8
Use newly added R-Car GPIO Gen3 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of the r8a7795 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-16arm64: renesas: ulcb: fixup audio_clkoutKuninori Morimoto1-1/+1
"audio_clkout" is dummy clock of <&rcar_sound 0> to avoid clock loop which invites probe conflict. Thus <&rcar_sound 0> and "audio_clkout" should be same value. On commit 2752660a37ae ("arm64: dts: renesas: ulcb: sound clock-frequency needs descending order") exchanged <&rcar_sound 0>, but it didn't modify "audio_clkout". This patch fixup it. Fixes: 2752660a37ae ("arm64: dts: renesas: ulcb: sound clock-frequency needs descending order") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16arm64: renesas: salvator-common: fixup audio_clkoutKuninori Morimoto1-1/+1
"audio_clkout" is dummy clock of <&rcar_sound 0> to avoid clock loop which invites probe conflict. Thus <&rcar_sound 0> and "audio_clkout" should be same value. On commit 5e2feac33095 ("arm64: renesas: salvator-common: sound clock-frequency needs descending order") exchanged <&rcar_sound 0>, but it didn't modify "audio_clkout". This patch fixup it. Fixes: 5e2feac33095 ("arm64: renesas: salvator-common: sound clock-frequency needs descending order") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7794: Use R-Car GPIO Gen2 fallback compat stringSimon Horman1-7/+7
Use newly added R-Car GPIO Gen2 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of the r8a7794 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-16ARM: dts: r8a7793: Use R-Car GPIO Gen2 fallback compat stringSimon Horman1-8/+8
Use newly added R-Car GPIO Gen2 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of the r8a7793 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-16ARM: dts: r8a7792: Use R-Car GPIO Gen2 fallback compat stringSimon Horman1-12/+12
Use newly added R-Car GPIO Gen2 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of the r8a7792 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-16ARM: dts: r8a7791: Use R-Car GPIO Gen2 fallback compat stringSimon Horman1-8/+8
Use newly added R-Car GPIO Gen2 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of the r8a7791 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-16ARM: dts: r8a7790: Use R-Car GPIO Gen2 fallback compat stringSimon Horman1-6/+6
Use newly added R-Car GPIO Gen2 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of the r8a7790 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-16ARM: dts: r8a7743: Use R-Car GPIO Gen2 fallback compat stringSimon Horman1-8/+8
Use newly added R-Car GPIO Gen2 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of the r8a7743 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-16ARM: dts: r8a7779: Use R-Car GPIO Gen1 fallback compat stringSimon Horman1-7/+7
Use newly added R-Car GPIO Gen1 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in DT of r8a7779 SoC. As the driver does not match on "renesas,gpio-r8a7779" there are some run-time considerations for this patch: * When a resulting DTB is used with kernels newer than v4.14 this should not have any run-time effect as renesas,rcar-gen1-gpio is matched by the driver since commit dbd1dad2ab8f ("gpio: rcar: add gen[123] fallback compatibility strings") * However, when used with older kernels GPIO will be disabled as no compat string match will be made by the driver. The regression documented above for the new DTB with old kernel case is acceptable in my opinion. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-16ARM: dts: r8a7778: Use R-Car GPIO Gen1 fallback compat stringSimon Horman1-5/+5
Use newly added R-Car GPIO Gen1 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in DT of r8a7778 SoC. As the driver does not match on "renesas,gpio-r8a7778" there are some run-time considerations for this patch: * When a resulting DTB is used with kernels newer than v4.14 this should not have any run-time effect as renesas,rcar-gen1-gpio is matched by the driver since commit dbd1dad2ab8f ("gpio: rcar: add gen[123] fallback compatibility strings") * However, when used with older kernels GPIO will be disabled as no compat string match will be made by the driver. The regression documented above for the new DTB with old kernel case is acceptable in my opinion. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-15arm64: dts: realtek: Add ProBox2 AvaAndreas Färber4-6/+38
Add a Device Tree for the PROBOX2 AVA TV Box. Move common memory reservations into rtd1295.dtsi. Cc: support@probox2.com Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-10-15dt-bindings: arm: realtek: Add ProBox2 AVAAndreas Färber1-0/+1
Document a compatible string for the PROBOX2 AVA TV Box. Cc: support@probox2.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-10-15dt-bindings: Add vendor prefix for ProBox2Andreas Färber1-0/+1
PROBOX2 is a TV box brand by Hong Kong based online reseller W2COMP Company Limited. Cc: support@probox2.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-10-15arm64: dts: rockchip: enable cec pin for rk3399 fireflyPierre-Hugues Husson1-0/+2
Add a pinctrl setting to configure the cec pin to the correct function. Signed-off-by: Pierre-Hugues Husson <phh@phh.me> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-15arm64: dts: rockchip: add the cec clk for dw-mipi-hdmi on rk3399Pierre-Hugues Husson1-2/+6
Add the HDMI CEC controller main clock coming from the CRU. Signed-off-by: Pierre-Hugues Husson <phh@phh.me> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-15ARM: dts: uniphier: fix W=2 build warningsMasahiro Yamada7-31/+31
Fix warnings like follows: Warning (node_name_chars_strict): Character '_' not recommended in ... Commit 8654cb8d0371 ("dtc: update warning settings for new bus and node/property name checks") says these checks are a bit subjective, but Rob also says to not add new W=2 warnings. The exising warnings should be fixed in order to catch new ones easily. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20Kunihiko Hayashi1-0/+45
Add nodes of thermal monitor and thermal zone for UniPhier LD20 SoC. The thermal monitor node is included in sysctrl. Since the efuse might not have a calibrated value of thermal monitor, this patch gives the default value for LD20. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2Kunihiko Hayashi1-4/+43
Add nodes of thermal monitor and thermal zone for UniPhier PXs2 SoC. The thermal monitor node is included in sysctrl. Since the efuse might not have a calibrated value of thermal monitor, this patch gives the default value for PXs2. Furthermore, add cpuN labels for reference in cooling-device property. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15dt-bindings: samsung: Document binding for new Odroid HC1 boardKrzysztof Kozlowski1-0/+1
Document the binding for new Hardkernel Odroid HC1 board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
2017-10-14clk: rockchip: add more rk3188 graphics clock idsHeiko Stuebner1-2/+7
Add ids for cif, v{d/e}pu clocks on rk3188. ACLK_CIF does get a needed 1 at it's end but that should be safe because no driver for the camera interface has surfaced so far and the old vendor kernels for these socs are based on linux-3.0 and still used board files then, so there really are no previous users anywhere to be found. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-14clk: rockchip: add clock id for PCLK_EFUSE256 of RK3368 SoCsRomain Perier1-0/+1
Signed-off-by: Romain Perier <romain.perier@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-14arm64: dts: rockchip: default serial for Firefly-RK3399Heinrich Schuchardt1-0/+4
The Firefly-RK3399 uses serial2 with 1,500,000 baud by default for communication in U-Boot and in the vendor provided distros. So let us set the same default in the Linux kernel. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-14arm64: dts: rockchip: enable touchpad button for rk3399-gru-kevinEmil Renner Berthing1-0/+4
Adding the linux,gpio-keymap entry also has the side-effect of making the driver register the touchpad as a touchpad rather than another touchscreen. The index for BTN_LEFT was found by trial and error. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-14ARM: dts: rockchip: Enable thermal on rk3288-vyasa boardMichael Trimarchi1-0/+6
Enable thermal on rk3288-vyasa board, TSHUT is high active. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-14ARM: dts: imx28-tx28: remove the regulators busLothar Waßmann1-70/+57
It is not recommended to place the regulator nodes inside 'simple-bus', so adjust them accordingly. The motivation for rearranging this is to make it easier to add new regulator nodes in the future. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-14ARM: dts: imx28-tx28: Relicense the TX28 dts file under GPLv2/X11Lothar Waßmann1-6/+36
The current GPL only licensing on the dts file makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our dts files first under a GPL/X11 dual-license. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: Fix typo for omap4 mcasp rx pathTony Lindgren1-1/+1
As reported by Peter Ujfalusi <peter.ujfalusi@ti.com>, the rx path on macsp is disabled and only tx is usable if the davinci-mcasp driver is updated for it. Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-10-13ARM: dts: imx51: Fix inconsistent display port namesMarco Franchi4-13/+13
Contrary to later i.MX SoCs, the parallel display interface pad groups on i.MX51 are called DISP1 and DISP2 in the Reference Manual, not DISP0 and DISP1. Fix this inconsistence by changing the DISP names in the i.mx51 dts. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: imx: Fix incorrect display nodes notationMarco Franchi30-31/+31
The following build warnings are seen with W=1: Warning (unit_address_vs_reg): Node /display@di0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /display@di1 has a unit name, but no reg property Fix all these warnings by changing 'display@diX' to 'dispX'. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13ARM: dts: sun5i: reference-design-tablet: Enable AXP209 AC and batteryChen-Yu Tsai1-0/+8
The reference design tablet has the DC jack wired to AXP209's ACIN. As a tablet, it also has an internal LiPo battery, wired to the PMIC's battery charger. Enable both. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-13ARM: dts: sun9i: Change node names to remove underscoresMaxime Ripard2-2/+2
Some boards have had node names with underscores. Remove them in favour of hyphens in order to reduce the DTC warnings. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 15:09:33 +0300