summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-06-24sched/fair: Introduce the burstable CFS controllerHuaixin Chang3-10/+73
The CFS bandwidth controller limits CPU requests of a task group to quota during each period. However, parallel workloads might be bursty so that they get throttled even when their average utilization is under quota. And they are latency sensitive at the same time so that throttling them is undesired. We borrow time now against our future underrun, at the cost of increased interference against the other system users. All nicely bounded. Traditional (UP-EDF) bandwidth control is something like: (U = \Sum u_i) <= 1 This guaranteeds both that every deadline is met and that the system is stable. After all, if U were > 1, then for every second of walltime, we'd have to run more than a second of program time, and obviously miss our deadline, but the next deadline will be further out still, there is never time to catch up, unbounded fail. This work observes that a workload doesn't always executes the full quota; this enables one to describe u_i as a statistical distribution. For example, have u_i = {x,e}_i, where x is the p(95) and x+e p(100) (the traditional WCET). This effectively allows u to be smaller, increasing the efficiency (we can pack more tasks in the system), but at the cost of missing deadlines when all the odds line up. However, it does maintain stability, since every overrun must be paired with an underrun as long as our x is above the average. That is, suppose we have 2 tasks, both specify a p(95) value, then we have a p(95)*p(95) = 90.25% chance both tasks are within their quota and everything is good. At the same time we have a p(5)p(5) = 0.25% chance both tasks will exceed their quota at the same time (guaranteed deadline fail). Somewhere in between there's a threshold where one exceeds and the other doesn't underrun enough to compensate; this depends on the specific CDFs. At the same time, we can say that the worst case deadline miss, will be \Sum e_i; that is, there is a bounded tardiness (under the assumption that x+e is indeed WCET). The benefit of burst is seen when testing with schbench. Default value of kernel.sched_cfs_bandwidth_slice_us(5ms) and CONFIG_HZ(1000) is used. mkdir /sys/fs/cgroup/cpu/test echo $$ > /sys/fs/cgroup/cpu/test/cgroup.procs echo 100000 > /sys/fs/cgroup/cpu/test/cpu.cfs_quota_us echo 100000 > /sys/fs/cgroup/cpu/test/cpu.cfs_burst_us ./schbench -m 1 -t 3 -r 20 -c 80000 -R 10 The average CPU usage is at 80%. I run this for 10 times, and got long tail latency for 6 times and got throttled for 8 times. Tail latencies are shown below, and it wasn't the worst case. Latency percentiles (usec) 50.0000th: 19872 75.0000th: 21344 90.0000th: 22176 95.0000th: 22496 *99.0000th: 22752 99.5000th: 22752 99.9000th: 22752 min=0, max=22727 rps: 9.90 p95 (usec) 22496 p99 (usec) 22752 p95/cputime 28.12% p99/cputime 28.44% The interferenece when using burst is valued by the possibilities for missing the deadline and the average WCET. Test results showed that when there many cgroups or CPU is under utilized, the interference is limited. More details are shown in: https://lore.kernel.org/lkml/5371BD36-55AE-4F71-B9D7-B86DC32E3D2B@linux.alibaba.com/ Co-developed-by: Shanpei Chen <shanpeic@linux.alibaba.com> Signed-off-by: Shanpei Chen <shanpeic@linux.alibaba.com> Co-developed-by: Tianchen Ding <dtcccc@linux.alibaba.com> Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com> Signed-off-by: Huaixin Chang <changhuaixin@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ben Segall <bsegall@google.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20210621092800.23714-2-changhuaixin@linux.alibaba.com
2021-06-24Merge tag 'amd-drm-fixes-5.13-2021-06-21' of ↵Dave Airlie3-15/+9
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.13-2021-06-21: amdgpu: - Revert GFX9, 10 doorbell fixes, we just end up trading one bug for another - Potential memory corruption fix in framebuffer handling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210621214132.4004-1-alexander.deucher@amd.com
2021-06-24crypto: sl3516 - depends on HAS_IOMEMCorentin Labbe1-0/+1
The sl3516 driver need to depend on HAS_IOMEM. This fixes a build error: ERROR: modpost: "devm_platform_ioremap_resource" [drivers/crypto/gemini/sl3516-ce.ko] undefined! Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-24objtool: Don't make .altinstructions writableJosh Poimboeuf1-1/+1
When objtool creates the .altinstructions section, it sets the SHF_WRITE flag to make the section writable -- unless the section had already been previously created by the kernel. The mismatch between kernel-created and objtool-created section flags can cause failures with external tooling (kpatch-build). And the section doesn't need to be writable anyway. Make the section flags consistent with the kernel's. Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls") Reported-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/6c284ae89717889ea136f9f0064d914cd8329d31.1624462939.git.jpoimboe@redhat.com
2021-06-24crypto: hisilicon/qm - implement for querying hardware tasks status.Wenkai Lin1-0/+18
This patch adds a function hisi_qm_is_q_updated to check if the task is ready in hardware queue when user polls an UACCE queue.This prevents users from repeatedly querying whether the accelerator has completed tasks, which wastes CPU resources. Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-24crypto: sl3516 - Fix build warning without CONFIG_PMYueHaibing1-0/+1
drivers/crypto/gemini/sl3516-ce-core.c:345:12: warning: ‘sl3516_ce_pm_resume’ defined but not used [-Wunused-function] static int sl3516_ce_pm_resume(struct device *dev) ^~~~~~~~~~~~~~~~~~~ The driver needs PM, otherwise clock and resets are never set. So make it depends on PM to fix this warning. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Suggested-by: LABBE Corentin <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-24MAINTAINERS: update caam crypto driver maintainers listHoria Geantă1-1/+1
Aymen steps down as caam maintainer, being replaced by Pankaj. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-24crypto: nx - Fix numerous sparse byte-order warningsHerbert Xu8-22/+32
The nx driver started out its life as a BE-only driver. However, somewhere along the way LE support was partially added. This never seems to have been extended all the way but it does trigger numerous warnings during build. This patch fixes all those warnings, but it doesn't mean that the driver will work on LE. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-24crypto: nx - Fix RCU warning in nx842_OF_upd_statusHerbert Xu1-2/+4
The function nx842_OF_upd_status triggers a sparse RCU warning when it directly dereferences the RCU-protected devdata. This appears to be an accident as there was another variable of the same name that was passed in from the caller. After it was removed (because the main purpose of using it, to update the status member was itself removed) the global variable unintenionally stood in as its replacement. This patch restores the devdata parameter. Fixes: 90fd73f912f0 ("crypto: nx - remove pSeries NX 'status' field") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-24crypto: api - Move crypto attr definitions out of crypto.hHerbert Xu3-21/+21
The definitions for crypto_attr-related types and enums are not needed by most Crypto API users. This patch moves them out of crypto.h and into algapi.h/internal.h depending on the extent of their use. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-24crypto: nx - Fix memcpy() over-reading in nonceKees Cook1-1/+1
Fix typo in memcpy() where size should be CTR_RFC3686_NONCE_SIZE. Fixes: 030f4e968741 ("crypto: nx - Fix reentrancy bugs") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-24crypto: hisilicon/sec - Fix spelling mistake "fallbcak" -> "fallback"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-24crypto: sa2ul - Remove unused auth_len variableHerbert Xu1-4/+0
This patch removes the unused auth_len variable from sa_aead_dma_in_callback. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-24crypto: sl3516 - fix duplicated inclusionkernel test robot1-1/+0
drivers/crypto/gemini/sl3516-ce-cipher.c: linux/io.h is included more than once. Generated by: scripts/checkincludes.pl Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-24perf/x86/intel/lbr: Zero the xstate buffer on allocationThomas Gleixner1-1/+2
XRSTORS requires a valid xstate buffer to work correctly. XSAVES does not guarantee to write a fully valid buffer according to the SDM: "XSAVES does not write to any parts of the XSAVE header other than the XSTATE_BV and XCOMP_BV fields." XRSTORS triggers a #GP: "If bytes 63:16 of the XSAVE header are not all zero." It's dubious at best how this can work at all when the buffer is not zeroed before use. Allocate the buffers with __GFP_ZERO to prevent XRSTORS failure. Fixes: ce711ea3cab9 ("perf/x86/intel/lbr: Support XSAVES/XRSTORS for LBR context switch") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/87wnr0wo2z.ffs@nanos.tec.linutronix.de
2021-06-23Merge tag 'spi-fix-v5.13-rc7' of ↵Linus Torvalds2-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of small, driver specific fixes that arrived in the past few weeks" * tag 'spi-fix-v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-nxp-fspi: move the register operation after the clock enable spi: tegra20-slink: Ensure SPI controller reset is deasserted
2021-06-23software node: Handle software node injection to an existing device properlyHeikki Krogerus1-4/+12
The function software_node_notify() - the function that creates and removes the symlinks between the node and the device - was called unconditionally in device_add_software_node() and device_remove_software_node(), but it needs to be called in those functions only in the special case where the node is added to a device that has already been registered. This fixes NULL pointer dereference that happens if device_remove_software_node() is used with device that was never registered. Fixes: b622b24519f5 ("software node: Allow node addition to already existing device") Reported-and-tested-by: Dominik Brodowski <linux@dominikbrodowski.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-23Merge tag 'pm-5.13-rc8' of ↵Linus Torvalds1-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Revert a recent PCI power management commit that causes initialization issues to appear on some systems" * tag 'pm-5.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PCI: PM: Do not read power state in pci_enable_device_flags()"
2021-06-23perf: Fix task context PMU for HeteroPeter Zijlstra1-1/+8
On HETEROGENEOUS hardware (ARM big.Little, Intel Alderlake etc.) each CPU might have a different hardware PMU. Since each such PMU is represented by a different struct pmu, but we only have a single HW task context. That means that the task context needs to switch PMU type when it switches CPUs. Not doing this means that ctx->pmu calls (pmu_{dis,en}able(), {start,commit,cancel}_txn() etc.) are called against the wrong PMU and things will go wobbly. Fixes: f83d2f91d259 ("perf/x86/intel: Add Alder Lake Hybrid support") Reported-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lkml.kernel.org/r/YMsy7BuGT8nBTspT@hirez.programming.kicks-ass.net
2021-06-23perf/x86/intel: Fix instructions:ppp support in Sapphire RapidsKan Liang1-1/+3
Perf errors out when sampling instructions:ppp. $ perf record -e instructions:ppp -- true Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (instructions:ppp). The instruction PDIR is only available on the fixed counter 0. The event constraint has been updated to fixed0_constraint in icl_get_event_constraints(). The Sapphire Rapids codes unconditionally error out for the event which is not available on the GP counter 0. Make the instructions:ppp an exception. Fixes: 61b985e3e775 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids") Reported-by: Yasin, Ahmad <ahmad.yasin@intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1624029174-122219-4-git-send-email-kan.liang@linux.intel.com
2021-06-23perf/x86/intel: Add more events requires FRONTEND MSR on Sapphire RapidsKan Liang1-0/+2
On Sapphire Rapids, there are two more events 0x40ad and 0x04c2 which rely on the FRONTEND MSR. If the FRONTEND MSR is not set correctly, the count value is not correct. Update intel_spr_extra_regs[] to support them. Fixes: 61b985e3e775 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1624029174-122219-3-git-send-email-kan.liang@linux.intel.com
2021-06-23perf/x86/intel: Fix fixed counter check warning for some Alder LakeKan Liang1-2/+7
For some Alder Lake machine, the below fixed counter check warning may be triggered. [ 2.010766] hw perf events fixed 5 > max(4), clipping! Current perf unconditionally increases the number of the GP counters and the fixed counters for a big core PMU on an Alder Lake system, because the number enumerated in the CPUID only reflects the common counters. The big core may has more counters. However, Alder Lake may have an alternative configuration. With that configuration, the X86_FEATURE_HYBRID_CPU is not set. The number of the GP counters and fixed counters enumerated in the CPUID is accurate. Perf mistakenly increases the number of counters. The warning is triggered. Directly use the enumerated value on the system with the alternative configuration. Fixes: f83d2f91d259 ("perf/x86/intel: Add Alder Lake Hybrid support") Reported-by: Jin Yao <yao.jin@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1624029174-122219-2-git-send-email-kan.liang@linux.intel.com
2021-06-23perf/x86/intel: Fix PEBS-via-PT reload base value for Extended PEBSLike Xu1-6/+14
If we use the "PEBS-via-PT" feature on a platform that supports extended PBES, like this: perf record -c 10000 \ -e '{intel_pt/branch=0/,branch-instructions/aux-output/p}' uname we will encounter the following call trace: [ 250.906542] unchecked MSR access error: WRMSR to 0x14e1 (tried to write 0x0000000000000000) at rIP: 0xffffffff88073624 (native_write_msr+0x4/0x20) [ 250.920779] Call Trace: [ 250.923508] intel_pmu_pebs_enable+0x12c/0x190 [ 250.928359] intel_pmu_enable_event+0x346/0x390 [ 250.933300] x86_pmu_start+0x64/0x80 [ 250.937231] x86_pmu_enable+0x16a/0x2f0 [ 250.941434] perf_event_exec+0x144/0x4c0 [ 250.945731] begin_new_exec+0x650/0xbf0 [ 250.949933] load_elf_binary+0x13e/0x1700 [ 250.954321] ? lock_acquire+0xc2/0x390 [ 250.958430] ? bprm_execve+0x34f/0x8a0 [ 250.962544] ? lock_is_held_type+0xa7/0x120 [ 250.967118] ? find_held_lock+0x32/0x90 [ 250.971321] ? sched_clock_cpu+0xc/0xb0 [ 250.975527] bprm_execve+0x33d/0x8a0 [ 250.979452] do_execveat_common.isra.0+0x161/0x1d0 [ 250.984673] __x64_sys_execve+0x33/0x40 [ 250.988877] do_syscall_64+0x3d/0x80 [ 250.992806] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 250.998302] RIP: 0033:0x7fbc971d82fb [ 251.002235] Code: Unable to access opcode bytes at RIP 0x7fbc971d82d1. [ 251.009303] RSP: 002b:00007fffb8aed808 EFLAGS: 00000202 ORIG_RAX: 000000000000003b [ 251.017478] RAX: ffffffffffffffda RBX: 00007fffb8af2f00 RCX: 00007fbc971d82fb [ 251.025187] RDX: 00005574792aac50 RSI: 00007fffb8af2f00 RDI: 00007fffb8aed810 [ 251.032901] RBP: 00007fffb8aed970 R08: 0000000000000020 R09: 00007fbc9725c8b0 [ 251.040613] R10: 6d6c61632f6d6f63 R11: 0000000000000202 R12: 00005574792aac50 [ 251.048327] R13: 00007fffb8af35f0 R14: 00005574792aafdf R15: 00005574792aafe7 This is because the target reload msr address is calculated based on the wrong base msr and the target reload msr value is accessed from ds->pebs_event_reset[] with the wrong offset. According to Intel SDM Table 2-14, for extended PBES feature, the reload msr for MSR_IA32_FIXED_CTRx should be based on MSR_RELOAD_FIXED_CTRx. For fixed counters, let's fix it by overriding the reload msr address and its value, thus avoiding out-of-bounds access. Fixes: 42880f726c66("perf/x86/intel: Support PEBS output to PT") Signed-off-by: Like Xu <likexu@tencent.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210621034710.31107-1-likexu@tencent.com
2021-06-23Merge branch 'stable/for-linus-5.14' of ↵Linus Torvalds1-8/+15
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "A fix for the regression for the DMA operations where the offset was ignored and corruptions would appear. Going forward there will be a cleanups to make the offset and alignment logic more clearer and better test-cases to help with this" * 'stable/for-linus-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: manipulate orig_addr when tlb_addr has offset
2021-06-23Merge remote-tracking branch 'regulator/for-5.14' into regulator-nextMark Brown70-1234/+6256
2021-06-23Merge remote-tracking branch 'regulator/for-5.13' into regulator-linusMark Brown2-12/+6
2021-06-23Merge series "Support ROCKCHIP SPI new feature" from Jon Lin ↵Mark Brown2-15/+41
<jon.lin@rock-chips.com>: Changes in v10: - The internal CS inactive function is only supported after VER 0x00110002 Changes in v9: - Conver to use CS GPIO description Changes in v8: - There is a problem with the version 7 mail format. resend it Changes in v7: - Fall back "rockchip,rv1126-spi" to "rockchip,rk3066-spi" Changes in v6: - Consider to compatibility, the "rockchip,rk3568-spi" is removed in Series-changes v5, so the commit massage should also remove the corresponding information Changes in v5: - Change to leave one compatible id rv1126, and rk3568 is compatible with rv1126 Changes in v4: - Adjust the order patches - Simply commit massage like redundancy "application" content Changes in v3: - Fix compile error which is find by Sascha in [v2,2/8] Jon Lin (6): dt-bindings: spi: spi-rockchip: add description for rv1126 spi: rockchip: add compatible string for rv1126 spi: rockchip: Set rx_fifo interrupt waterline base on transfer item spi: rockchip: Wait for STB status in slave mode tx_xfer spi: rockchip: Support cs-gpio spi: rockchip: Support SPI_CS_HIGH .../devicetree/bindings/spi/spi-rockchip.yaml | 1 + drivers/spi/spi-rockchip.c | 55 ++++++++++++++----- 2 files changed, 41 insertions(+), 15 deletions(-) -- 2.17.1
2021-06-23spi: spi-sh-msiof: : use proper DMAENGINE API for terminationWolfram Sang1-2/+2
dmaengine_terminate_all() is deprecated in favor of explicitly saying if it should be sync or async. Here, we want dmaengine_terminate_sync() because there is no other synchronization code in the driver to handle an async case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210623095843.3228-3-wsa+renesas@sang-engineering.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23spi: spi-rspi: : use proper DMAENGINE API for terminationWolfram Sang1-3/+3
dmaengine_terminate_all() is deprecated in favor of explicitly saying if it should be sync or async. Here, we want dmaengine_terminate_sync() because there is no other synchronization code in the driver to handle an async case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210623095843.3228-2-wsa+renesas@sang-engineering.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23arm64: tlb: fix the TTL value of tlb_get_levelZhenyu Ye1-0/+4
The TTL field indicates the level of page table walk holding the *leaf* entry for the address being invalidated. But currently, the TTL field may be set to an incorrent value in the following stack: pte_free_tlb __pte_free_tlb tlb_remove_table tlb_table_invalidate tlb_flush_mmu_tlbonly tlb_flush In this case, we just want to flush a PTE page, but the tlb->cleared_pmds is set and we get tlb_level = 2 in the tlb_get_level() function. This may cause some unexpected problems. This patch set the TTL field to 0 if tlb->freed_tables is set. The tlb->freed_tables indicates page table pages are freed, not the leaf entry. Cc: <stable@vger.kernel.org> # 5.9.x Fixes: c4ab2cbc1d87 ("arm64: tlb: Set the TTL field in flush_tlb_range") Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: ZhuRui <zhurui3@huawei.com> Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com> Link: https://lore.kernel.org/r/b80ead47-1f88-3a00-18e1-cacc22f54cc4@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2021-06-23spi: spi-rockchip: add description for rv1126Jon Lin1-0/+1
The description below will be used for rv1126.dtsi or compatible one in the future Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210621104800.19088-2-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23spi: rockchip: Support SPI_CS_HIGHJon Lin1-1/+13
1.Add standard spi-cs-high support 2.Refer to spi-controller.yaml for details Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210621104848.19539-2-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23spi: rockchip: Support cs-gpioJon Lin1-5/+10
1.Add standard cs-gpio support 2.Refer to spi-controller.yaml for details Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210621104848.19539-1-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23spi: rockchip: Wait for STB status in slave mode tx_xferJon Lin1-7/+14
After ROCKCHIP_SPI_VER2_TYPE2, SR->STB is a more accurate judgment bit for spi slave transmition. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210621104800.19088-5-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23spi: rockchip: Set rx_fifo interrupt waterline base on transfer itemJon Lin1-2/+2
The error here is to calculate the width as 8 bits. In fact, 16 bits should be considered. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210621104800.19088-4-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23spi: rockchip: add compatible string for rv1126Jon Lin1-0/+1
Add compatible string for rv1126 for potential applications. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210621104800.19088-3-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23regulator: bd9576: Fix uninitializes variable may_have_irqsColin Ian King1-1/+1
The boolean variable may_have_irqs is not ininitialized and is only being set to true in the case where chip is ROHM_CHIP_TYPE_BD9576. Fix this by ininitialized may_have_irqs to false. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: e7bf1fa58c46 ("regulator: bd9576: Support error reporting") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210622144730.22821-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23regulator: max8893: Select REGMAP_I2C to fix build errorAxel Lin1-0/+1
Fix build error if REGMAP_I2C is not set. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210622141526.472175-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23regulator: da9052: Ensure enough delay time for .set_voltage_time_selAxel Lin1-1/+2
Use DIV_ROUND_UP to prevent truncation by integer division issue. This ensures we return enough delay time. Also fix returning negative value when new_sel < old_sel. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210618141412.4014912-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23Merge branch 'topic/ppc-kvm' of ↵Paolo Bonzini331-2892/+4492
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into HEAD - Support for the H_RPT_INVALIDATE hypercall - Conversion of Book3S entry/exit to C - Bug fixes
2021-06-23spi: spi-sun6i: Fix chipselect/clock bugMirko Vogt1-1/+5
The current sun6i SPI implementation initializes the transfer too early, resulting in SCK going high before the transfer. When using an additional (gpio) chipselect with sun6i, the chipselect is asserted at a time when clock is high, making the SPI transfer fail. This is due to SUN6I_GBL_CTL_BUS_ENABLE being written into SUN6I_GBL_CTL_REG at an early stage. Moving that to the transfer function, hence, right before the transfer starts, mitigates that problem. Fixes: 3558fe900e8af (spi: sunxi: Add Allwinner A31 SPI controller driver) Signed-off-by: Mirko Vogt <mirko-dev|linux@nanl.de> Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com> Link: https://lore.kernel.org/r/20210614144507.y3udezjfbko7eavv@runtux.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23regulator: mt6358: Fix vdram2 .vsel_maskHsin-Hsiung Wang1-1/+1
The valid vsel value are 0 and 12, so the .vsel_mask should be 0xf. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/1624424169-510-1-git-send-email-hsin-hsiung.wang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-23x86/sev: Use "SEV: " prefix for messages from sev.cJoerg Roedel1-1/+1
The source file has been renamed froms sev-es.c to sev.c, but the messages are still prefixed with "SEV-ES: ". Change that to "SEV: " to make it consistent. Fixes: e759959fe3b8 ("x86/sev-es: Rename sev-es.{ch} to sev.{ch}") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210622144825.27588-4-joro@8bytes.org
2021-06-23x86/sev: Add defines for GHCB version 2 MSR protocol requestsBrijesh Singh1-1/+15
Add the necessary defines for supporting the GHCB version 2 protocol. This includes defines for: - MSR-based AP hlt request/response - Hypervisor Feature request/response This is the bare minimum of requests that need to be supported by a GHCB version 2 implementation. There are more requests in the specification, but those depend on Secure Nested Paging support being available. These defines are shared between SEV host and guest support. [ bp: Fold in https://lkml.kernel.org/r/20210622144825.27588-2-joro@8bytes.org too. Simplify the brewing macro maze into readability. ] Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/YNLXQIZ5e1wjkshG@8bytes.org
2021-06-23KVM: s390: allow facility 192 (vector-packed-decimal-enhancement facility 2)Christian Borntraeger1-0/+4
pass through newer vector instructions if vector support is enabled. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-06-23KVM: s390: gen_facilities: allow facilities 165, 193, 194 and 196Christian Borntraeger1-0/+4
This enables the NNPA, BEAR enhancement,reset DAT protection and processor activity counter facilities via the cpu model. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-06-23KVM: s390: get rid of register asm usageHeiko Carstens1-9/+9
Using register asm statements has been proven to be very error prone, especially when using code instrumentation where gcc may add function calls, which clobbers register contents in an unexpected way. Therefore get rid of register asm statements in kvm code, even though there is currently nothing wrong with them. This way we know for sure that this bug class won't be introduced here. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20210621140356.1210771-1-hca@linux.ibm.com [borntraeger@de.ibm.com: checkpatch strict fix] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-06-23scsi: sd: Call sd_revalidate_disk() for ioctl(BLKRRPART)Christoph Hellwig1-4/+18
While the disk state has nothing to do with partitions, BLKRRPART is used to force a full revalidate after things like a disk format for historical reasons. Restore that behavior. Link: https://lore.kernel.org/r/20210617115504.1732350-1-hch@lst.de Fixes: 471bd0af544b ("sd: use bdev_check_media_change") Reported-by: Xiang Chen <chenxiang66@hisilicon.com> Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-22module: limit enabling module.sig_enforceMimi Zohar1-5/+9
Irrespective as to whether CONFIG_MODULE_SIG is configured, specifying "module.sig_enforce=1" on the boot command line sets "sig_enforce". Only allow "sig_enforce" to be set when CONFIG_MODULE_SIG is configured. This patch makes the presence of /sys/module/module/parameters/sig_enforce dependent on CONFIG_MODULE_SIG=y. Fixes: fda784e50aac ("module: export module signature enforcement status") Reported-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Tested-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-22btrfs: remove unused btrfs_fs_info::total_pinnedNikolay Borisov1-2/+0
This got added 14 years ago in 324ae4df00fd ("Btrfs: Add block group pinned accounting back") but it was not ever used. Subsequently its usage got gradually removed in 8790d502e440 ("Btrfs: Add support for mirroring across drives") and 11833d66be94 ("Btrfs: improve async block group caching"). Let's remove it for good! Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 01:49:22 +0300