summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-06-23Merge branch 'bonding-initial-support-for-hardware-crypto-offload'David S. Miller6-27/+183
Jarod Wilson says: ==================== bonding: initial support for hardware crypto offload This is an initial functional implementation for doing pass-through of hardware encryption from bonding device to capable slaves, in active-backup bond setups. This was developed and tested using ixgbe-driven Intel x520 interfaces with libreswan and a transport mode connection, primarily using netperf, with assorted connection failures forced during transmission. The failover works quite well in my testing, and overall performance is right on par with offload when running on a bare interface, no bond involved. Caveats: this is ONLY enabled for active-backup, because I'm not sure how one would manage multiple offload handles for different devices all running at the same time in the same xfrm, and it relies on some minor changes to both the xfrm code and slave device driver code to get things to behave, and I don't have immediate access to any other hardware that could function similarly, but the NIC driver changes are minimal and straight-forward enough that I've included what I think ought to be enough for mlx5 devices too. v2: reordered patches, switched (back) to using CONFIG_XFRM_OFFLOAD to wrap the code additions and wrapped overlooked additions. v3: rebase w/net-next open, add proper cc list to cover letter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23bonding: support hardware encryption offload to slavesJarod Wilson2-2/+128
Currently, this support is limited to active-backup mode, as I'm not sure about the feasilibity of mapping an xfrm_state's offload handle to multiple hardware devices simultaneously, and we rely on being able to pass some hints to both the xfrm and NIC driver about whether or not they're operating on a slave device. I've tested this atop an Intel x520 device (ixgbe) using libreswan in transport mode, succesfully achieving ~4.3Gbps throughput with netperf (more or less identical to throughput on a bare NIC in this system), as well as successful failover and recovery mid-netperf. v2: just use CONFIG_XFRM_OFFLOAD for wrapping, isolate more code with it CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jakub Kicinski <kuba@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23mlx5: become aware of when running as a bonding slaveJarod Wilson1-0/+6
I've been unable to get my hands on suitable supported hardware to date, but I believe this ought to be all that is needed to enable the mlx5 driver to also work with bonding active-backup crypto offload passthru. CC: Boris Pismenny <borisp@mellanox.com> CC: Saeed Mahameed <saeedm@mellanox.com> CC: Leon Romanovsky <leon@kernel.org> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jakub Kicinski <kuba@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23ixgbe_ipsec: become aware of when running as a bonding slaveJarod Wilson1-8/+31
Slave devices in a bond doing hardware encryption also need to be aware that they're slaves, so we operate on the slave instead of the bonding master to do the actual hardware encryption offload bits. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jakub Kicinski <kuba@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org Acked-by: Jeff Kirsher <Jeffrey.t.kirsher@intel.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23xfrm: bail early on slave pass over skbJarod Wilson2-17/+18
This is prep work for initial support of bonding hardware encryption pass-through support. The bonding driver will fill in the slave_dev pointer, and we use that to know not to skb_push() again on a given skb that was already processed on the bond device. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jakub Kicinski <kuba@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23Merge branch 'devlink-Support-get-set-mac-address-of-a-port-function'David S. Miller10-69/+343
Parav Pandit says: ==================== devlink: Support get,set mac address of a port function Currently, ip link set dev <pfndev> vf <vf_num> <param> <value> has below few limitations. 1. Command is limited to set VF parameters only. It cannot set the default MAC address for the PCI PF. 2. It can be set only on system where PCI SR-IOV capability exists. In smartnic based system, eswitch of a NIC resides on a different embedded cpu which has the VF and PF representors for the SR-IOV functions of a host system in which this smartnic is plugged-in. 3. It cannot setup the function attributes of sub-function described in detail in comprehensive RFC [1] and [2]. This series covers the first small part to let user query and set MAC address (hardware address) of a PCI PF/VF which is represented by devlink port pcipf, pcivf port flavours respectively. Whenever a devlink port manages a function connected to a devlink port, it allows to query and set its hardware address. Driver implements necessary get/set callback functions if it supports port function for a given port type. Patch summary: Patch-1 Prepares devlink port fill routines for extack Patch-2 and 3 extended devlink interface to get/set port function attributes, mainly hardware address to start with. Patch-2 Extended port dump command to query port function hardware address Patch-3 Introduces a command to set the hardware address of a port function Patch-4 to 9 refactors and implement devlink callbacks in mlx5_core driver. Patch-4 Constify the mac address pointer in set routines Patch-5 Introduces eswich check helper to use in devlink facing callbacks Patch-6 Moves port index, port number conversion routine to eswitch header file Patch-7 Implements port function query devlink callback Patch-8 Refactors mac address setting routine to uniformly use state_lock Patch-9 Implements port function set devlink callback [1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/ [2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net/mlx5: E-switch, Supporting setting devlink port function mac addressParav Pandit3-0/+41
Enable user to set mac address of the PCI PF and VF port function. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net/mlx5: Split mac address setting function for using state_lockParav Pandit1-14/+24
Refactor mac address setting function to let caller hold the necessary state_lock mutex, so that subsequent patch and use this helper routine. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net/mlx5: E-switch, Support querying port function mac addressParav Pandit3-0/+55
Support querying mac address of the eswitch devlink port function. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net/mlx5: Move helper to eswitch layerParav Pandit2-7/+8
To use port number to port index conversion at eswitch level, move it to eswitch header. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net/mlx5: E-switch, Introduce and use eswitch support check helperParav Pandit3-40/+50
Introduce an helper routine to get esw from a devlink device and use it at eswitch callbacks and in subsequent patch. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net/mlx5: Constify mac address pointerParav Pandit4-5/+5
Since none of the functions need to modify the input mac address, constify them. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net/devlink: Support setting hardware address of port functionParav Pandit2-0/+86
PCI PF and VF devlink port can manage the function represented by a devlink port. Allow users to set port function's hardware address. Example of a PCI VF port which supports a port function: $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 function: hw_addr 00:00:00:00:00:00 $ devlink port function set pci/0000:06:00.0/2 hw_addr 00:11:22:33:44:55 $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 function: hw_addr 00:11:22:33:44:55 Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net/devlink: Support querying hardware address of port functionParav Pandit3-0/+67
PCI PF and VF devlink port can manage the function represented by a devlink port. Enable users to query port function's hardware address. Example of a PCI VF port which supports a port function: $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 function: hw_addr 00:11:22:33:44:66 $ devlink port show pci/0000:06:00.0/2 -jp { "port": { "pci/0000:06:00.0/2": { "type": "eth", "netdev": "enp6s0pf0vf1", "flavour": "pcivf", "pfnum": 0, "vfnum": 1, "function": { "hw_addr": "00:11:22:33:44:66" } } } } Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net/devlink: Prepare devlink port functions to fill extackParav Pandit1-4/+8
Prepare devlink port related functions to optionally fill up the extack information which will be used in subsequent patch by port function attribute(s). Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23KVM: nVMX: Plumb L2 GPA through to PML emulationSean Christopherson5-10/+11
Explicitly pass the L2 GPA to kvm_arch_write_log_dirty(), which for all intents and purposes is vmx_write_pml_buffer(), instead of having the latter pull the GPA from vmcs.GUEST_PHYSICAL_ADDRESS. If the dirty bit update is the result of KVM emulation (rare for L2), then the GPA in the VMCS may be stale and/or hold a completely unrelated GPA. Fixes: c5f983f6e8455 ("nVMX: Implement emulated Page Modification Logging") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200622215832.22090-2-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-22MAINTAINERS: update email address for Felix FietkauFelix Fietkau1-1/+1
The old address has been bouncing for a while now Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22IB/mad: Fix use after free when destroying MAD agentShay Drory1-1/+1
Currently, when RMPP MADs are processed while the MAD agent is destroyed, it could result in use after free of rmpp_recv, as decribed below: cpu-0 cpu-1 ----- ----- ib_mad_recv_done() ib_mad_complete_recv() ib_process_rmpp_recv_wc() unregister_mad_agent() ib_cancel_rmpp_recvs() cancel_delayed_work() process_rmpp_data() start_rmpp() queue_delayed_work(rmpp_recv->cleanup_work) destroy_rmpp_recv() free_rmpp_recv() cleanup_work()[1] spin_lock_irqsave(&rmpp_recv->agent->lock) <-- use after free [1] cleanup_work() == recv_cleanup_handler Fix it by waiting for the MAD agent reference count becoming zero before calling to ib_cancel_rmpp_recvs(). Fixes: 9a41e38a467c ("IB/mad: Use IDR for agent IDs") Link: https://lore.kernel.org/r/20200621104738.54850-2-leon@kernel.org Signed-off-by: Shay Drory <shayd@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-22RDMA/mlx5: Protect from kernel crash if XRC_TGT doesn't have udataLeon Romanovsky1-1/+1
Don't deref udata if it is NULL BUG: kernel NULL pointer dereference, address: 0000000000000030 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 SMP PTI CPU: 2 PID: 1592 Comm: python3 Not tainted 5.7.0-rc6+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:create_qp+0x39e/0xae0 [mlx5_ib] Code: c0 0d 00 00 bf 10 01 00 00 e8 be a9 e4 e0 48 85 c0 49 89 c2 0f 84 0c 07 00 00 41 8b 85 74 63 01 00 0f c8 a9 00 00 00 10 74 0a <41> 8b 46 30 0f c8 41 89 42 14 41 8b 52 18 41 0f b6 4a 1c 0f ca 89 RSP: 0018:ffffc9000067f8b0 EFLAGS: 00010206 RAX: 0000000010170000 RBX: ffff888441313000 RCX: 0000000000000000 RDX: 0000000000000200 RSI: 0000000000000000 RDI: ffff88845b1d4400 RBP: ffffc9000067fa60 R08: 0000000000000200 R09: ffff88845b1d4200 R10: ffff88845b1d4200 R11: ffff888441313000 R12: ffffc9000067f950 R13: ffff88846ac00140 R14: 0000000000000000 R15: ffff88846c2bc000 FS: 00007faa1a3c0540(0000) GS:ffff88846fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000446dca003 CR4: 0000000000760ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 mlx5_ib_create_qp+0x897/0xfa0 [mlx5_ib] ib_create_qp+0x9e/0x300 [ib_core] create_qp+0x92d/0xb20 [ib_uverbs] ? ib_uverbs_cq_event_handler+0x30/0x30 [ib_uverbs] ? release_resource+0x30/0x30 ib_uverbs_create_qp+0xc4/0xe0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xc8/0xf0 [ib_uverbs] ib_uverbs_run_method+0x223/0x770 [ib_uverbs] ? track_pfn_remap+0xa7/0x100 ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs] ? remap_pfn_range+0x358/0x490 ib_uverbs_cmd_verbs.isra.6+0x19b/0x370 [ib_uverbs] ? rdma_umap_priv_init+0x82/0xe0 [ib_core] ? vm_mmap_pgoff+0xec/0x120 ib_uverbs_ioctl+0xc0/0x120 [ib_uverbs] ksys_ioctl+0x92/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e383085c2425 ("RDMA/mlx5: Set ECE options during QP create") Link: https://lore.kernel.org/r/20200621115959.60126-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-22KVM: x86/mmu: Avoid mixing gpa_t with gfn_t in walk_addr_generic()Vitaly Kuznetsov1-6/+3
translate_gpa() returns a GPA, assigning it to 'real_gfn' seems obviously wrong. There is no real issue because both 'gpa_t' and 'gfn_t' are u64 and we don't use the value in 'real_gfn' as a GFN, we do real_gfn = gpa_to_gfn(real_gfn); instead. 'If you see a "buffalo" sign on an elephant's cage, do not trust your eyes', but let's fix it for good. No functional change intended. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200622151435.752560-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-22KVM: LAPIC: ensure APIC map is up to date on concurrent update requestsPaolo Bonzini2-21/+32
The following race can cause lost map update events: cpu1 cpu2 apic_map_dirty = true ------------------------------------------------------------ kvm_recalculate_apic_map: pass check mutex_lock(&kvm->arch.apic_map_lock); if (!kvm->arch.apic_map_dirty) and in process of updating map ------------------------------------------------------------- other calls to apic_map_dirty = true might be too late for affected cpu ------------------------------------------------------------- apic_map_dirty = false ------------------------------------------------------------- kvm_recalculate_apic_map: bail out on if (!kvm->arch.apic_map_dirty) To fix it, record the beginning of an update of the APIC map in apic_map_dirty. If another APIC map change switches apic_map_dirty back to DIRTY during the update, kvm_recalculate_apic_map should not make it CLEAN, and the other caller will go through the slow path. Reported-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-22RDMA/counter: Query a counter before releaseMark Zhang1-1/+3
Query a dynamically-allocated counter before release it, to update it's hwcounters and log all of them into history data. Otherwise all values of these hwcounters will be lost. Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read") Link: https://lore.kernel.org/r/20200621110000.56059-1-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-22Merge tag 'spi-fix-v5.8-rc2' of ↵Linus Torvalds8-58/+90
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "Quite a lot of fixes here for no single reason. There's a collection of the usual sort of device specific fixes and also a bunch of people have been working on spidev and the userspace test program spidev_test so they've got an unusually large collection of small fixes" * tag 'spi-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spidev: fix a potential use-after-free in spidev_release() spi: spidev: fix a race between spidev_release and spidev_remove spi: stm32-qspi: Fix error path in case of -EPROBE_DEFER spi: uapi: spidev: Use TABs for alignment spi: spi-fsl-dspi: Free DMA memory with matching function spi: tools: Add macro definitions to fix build errors spi: tools: Make default_tx/rx and input_tx static spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a spi: rspi: Use requested instead of maximum bit rate spi: spidev_test: Use %u to format unsigned numbers spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH
2020-06-22kvm: lapic: fix broken vcpu hotplugIgor Mammedov1-0/+1
Guest fails to online hotplugged CPU with error smpboot: do_boot_cpu failed(-1) to wakeup CPU#4 It's caused by the fact that kvm_apic_set_state(), which used to call recalculate_apic_map() unconditionally and pulled hotplugged CPU into apic map, is updating map conditionally on state changes. In this case the APIC map is not considered dirty and the is not updated. Fix the issue by forcing unconditional update from kvm_apic_set_state(), like it used to be. Fixes: 4abaffce4d25a ("KVM: LAPIC: Recalculate apic map in batch") Cc: stable@vger.kernel.org Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200622160830.426022-1-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-22Merge tag 'regulator-fix-v5.8-rc2' of ↵Linus Torvalds4-24/+41
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "This has a fix for the refactoring out of the pickable ranges functionality, plus the removal of a BROKEN dependency on mt6358 now that the dependencies were merged in -rc1 and a couple of device specific fixes" * tag 'regulator-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: mt6358: Remove BROKEN dependency regualtor: pfuze100: correct sw1a/sw2 on pfuze3000 regulator: Fix pickable ranges mapping regulator: da9063: fix LDO9 suspend and warning.
2020-06-22Merge tag 'regmap-fix-v5.8-rc2' of ↵Linus Torvalds1-56/+50
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "A few small fixes, none of which are likely to have any substantial impact here - the most substantial one is a fix for a long standing memory leak on devices that use register patching which will only have an impact if the device is removed and re-added" * tag 'regmap-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix memory leak from regmap_register_patch regmap: fix the kerneldoc for regmap_test_bits() regmap: fix alignment issue
2020-06-22tools/virtio: Use tools/include/list.h instead of stubsEugenio Pérez4-9/+6
It should not make any significant difference but reduce stub code. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Link: https://lore.kernel.org/r/20200418102217.32327-9-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22tools/virtio: Reset index in virtio_test --reset.Eugenio Pérez1-2/+24
This way behavior for vhost is more like a VM. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Link: https://lore.kernel.org/r/20200418102217.32327-8-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22tools/virtio: Extract virtqueue initialization in vq_resetEugenio Pérez1-7/+14
So we can reset after that in the main loop. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Link: https://lore.kernel.org/r/20200418102217.32327-7-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22tools/virtio: Use __vring_new_virtqueue in virtio_test.cEugenio Pérez1-4/+3
As updated in ("2a2d1382fe9d virtio: Add improved queue allocation API") Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Link: https://lore.kernel.org/r/20200418102217.32327-6-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22tools/virtio: Add --resetEugenio Pérez3-4/+95
Currently, it only removes and add backend, but it will reset vq position in future commits. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Link: https://lore.kernel.org/r/20200418102217.32327-5-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22tools/virtio: Add --batch=random optionEugenio Pérez1-4/+14
So we can test with non-deterministic batches in flight. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Link: https://lore.kernel.org/r/20200418102217.32327-4-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22tools/virtio: Add --batch optionEugenio Pérez1-10/+37
This allow to test vhost having >1 buffers in flight Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Link: https://lore.kernel.org/r/20200401183118.8334-5-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20200418102217.32327-3-eperezma@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22virtio-mem: add memory via add_memory_driver_managed()David Hildenbrand1-3/+22
Virtio-mem managed memory is always detected and added by the virtio-mem driver, never using something like the firmware-provided memory map. This is the case after an ordinary system reboot, and has to be guaranteed after kexec. Especially, virtio-mem added memory resources can contain inaccessible parts ("unblocked memory blocks"), blindly forwarding them to a kexec kernel is dangerous, as unplugged memory will get accessed (esp. written). Let's use the new way of adding special driver-managed memory introduced in commit 7b7b27214bba ("mm/memory_hotplug: introduce add_memory_driver_managed()"). This will result in no entries in /sys/firmware/memmap ("raw firmware- provided memory map"), the memory resource will be flagged IORESOURCE_MEM_DRIVER_MANAGED (esp., kexec_file_load() will not place kexec images on this memory), and it is exposed as "System RAM (virtio_mem)" in /proc/iomem, so esp. kexec-tools can properly handle it. Example /proc/iomem before this change: [...] 140000000-333ffffff : virtio0 140000000-147ffffff : System RAM 334000000-533ffffff : virtio1 338000000-33fffffff : System RAM 340000000-347ffffff : System RAM 348000000-34fffffff : System RAM [...] Example /proc/iomem after this change: [...] 140000000-333ffffff : virtio0 140000000-147ffffff : System RAM (virtio_mem) 334000000-533ffffff : virtio1 338000000-33fffffff : System RAM (virtio_mem) 340000000-347ffffff : System RAM (virtio_mem) 348000000-34fffffff : System RAM (virtio_mem) [...] Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: teawater <teawaterz@linux.alibaba.com> Fixes: 5f1f79bbc9e26 ("virtio-mem: Paravirtualized memory hotplug") Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200611093518.5737-1-david@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
2020-06-22virtio-mem: silence a static checker warningDan Carpenter1-1/+1
Smatch complains that "rc" can be uninitialized if we hit the "break;" statement on the first iteration through the loop. I suspect that this can't happen in real life, but returning a zero literal is cleaner and silence the static checker warning. Fixes: 5f1f79bbc9e2 ("virtio-mem: Paravirtualized memory hotplug") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200610085911.GC5439@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22vhost_vdpa: Fix potential underflow in vhost_vdpa_mmap()Dan Carpenter1-1/+1
The "vma->vm_pgoff" variable is an unsigned long so if it's larger than INT_MAX then "index" can be negative leading to an underflow. Fix this by changing the type of "index" to "unsigned long". Fixes: ddd89d0a059d ("vhost_vdpa: support doorbell mapping via mmap") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200610085852.GB5439@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22vdpa: fix typos in the comments for __vdpa_alloc_device()Jason Wang1-1/+1
Fix two typos in the comments for __vdpa_alloc_device(). Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200527060528.9100-1-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-22Merge tag 'asoc-fix-v5.8-rc2' of ↵Takashi Iwai26-151/+295
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.8 This is a collection of mostly small fixes, mostly fixing fallout from some of the DPCM changes that went in last time around which shook out some issues on i.MX and Qualcomm platforms. The addition of a managed version of snd_soc_register_dai() is to fix resource leaks. There's also a few new device IDs for x86 systems.
2020-06-22Revert "kernel/printk: add kmsg SEEK_CUR handling"Jason A. Donenfeld2-15/+0
This reverts commit 8ece3b3eb576a78d2e67ad4c3a80a39fa6708809. This commit broke userspace. Bash uses ESPIPE to determine whether or not the file should be read using "unbuffered I/O", which means reading 1 byte at a time instead of 128 bytes at a time. I used to use bash to read through kmsg in a really quite nasty way: while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do echo "SARU $line" done < /dev/kmsg This will show all lines that can fit into the 128 byte buffer, and skip lines that don't. That's pretty awful, but at least it worked. With this change, bash now tries to do 1-byte reads, which means it skips all the lines, which is worse than before. Now, I don't really care very much about this, and I'm already look for a workaround. But I did just spend an hour trying to figure out why my scripts were broken. Either way, it makes no difference to me personally whether this is reverted, but it might be something to consider. If you declare that "trying to read /dev/kmsg with bash is terminally stupid anyway," I might be inclined to agree with you. But do note that bash uses lseek(fd, 0, SEEK_CUR)==>ESPIPE to determine whether or not it's reading from a pipe. Cc: Bruno Meneguele <bmeneg@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-22Linux 5.8-rc2Linus Torvalds1-1/+1
2020-06-22Merge tag 'selinux-pr-20200621' of ↵Linus Torvalds2-13/+12
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux fixes from Paul Moore: "Three small patches to fix problems in the SELinux code, all found via clang. Two patches fix potential double-free conditions and one fixes an undefined return value" * tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix undefined return of cond_evaluate_expr selinux: fix a double free in cond_read_node()/cond_read_list() selinux: fix double free
2020-06-21Merge tag 'pinctrl-v5.8-2' of ↵Linus Torvalds6-23/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some early fixes collected during the first week after the merge window, all pretty self-evident, with the details below. The revert is the crucial thing. - Fix a warning on the Qualcomm SPMI GPIO chip being instatiated twice without a unique irqchip struct - Use the noirq variants of the suspend and resume callbacks in the Tegra driver - Clean up the errorpath on the MCP23s08 driver - Revert the use of devm_of_iomap() in the Freescale driver as it was regressing the platform - Add some missing pins in the Qualcomm IPQ6018 driver - Fix a simple documentation bug in the pinctrl-single driver" * tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: single: fix function name in documentation pinctrl: qcom: ipq6018 Add missing pins in qpic pin group Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'" pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings pinctrl: tegra: Use noirq suspend/resume callbacks pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage
2020-06-21Merge tag 'kbuild-fixes-v5.8' of ↵Linus Torvalds8-34/+18
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED - improve cc-option in scripts/Kbuild.include to clean up temp files - improve cc-option in scripts/Kconfig.include for more reliable compile option test - do not copy modules.builtin by 'make install' because it would break existing systems - use 'userprogs' syntax for watch_queue sample * tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: samples: watch_queue: build sample program for target architecture Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n" scripts: Fix typo in headers_install.sh kconfig: unify cc-option and as-option kbuild: improve cc-option to clean up all temporary files Makefile: Improve compressed debug info support detection
2020-06-21Merge tag 'powerpc-5.8-3' of ↵Linus Torvalds7-20/+37
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - One fix for the interrupt rework we did last release which broke KVM-PR - Three commits fixing some fallout from the READ_ONCE() changes interacting badly with our 8xx 16K pages support, which uses a pte_t that is a structure of 4 actual PTEs - A cleanup of the 8xx pte_update() to use the newly added pmd_off() - A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is enabled - A minor fix for the SPU syscall generation Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike Rapoport, Nicholas Piggin. * tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/8xx: Provide ptep_get() with 16k pages mm: Allow arches to provide ptep_get() mm/gup: Use huge_ptep_get() in gup_hugepte() powerpc/syscalls: Use the number when building SPU syscall table powerpc/8xx: use pmd_off() to access a PMD entry in pte_update() powerpc/64s: Fix KVM interrupt using wrong save area powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
2020-06-21Merge branch 'linus' of ↵Linus Torvalds12-35/+45
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - NULL dereference in octeontx - PM reference imbalance in ks-sa - deadlock in crypto manager - memory leak in drbg - missing socket limit check on receive SG list size in algif_skcipher - typos in caam - warnings in ccp and hisilicon * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: drbg - always try to free Jitter RNG instance crypto: marvell/octeontx - Fix a potential NULL dereference crypto: algboss - don't wait during notifier callback crypto: caam - fix typos crypto: ccp - Fix sparse warnings in sev-dev crypto: hisilicon - Cap block size at 2^31 crypto: algif_skcipher - Cap recv SG list at ctx->used hwrng: ks-sa - Fix runtime PM imbalance on error
2020-06-21samples: watch_queue: build sample program for target architectureMasahiro Yamada2-7/+5
This userspace program includes UAPI headers exported to usr/include/. 'make headers' always works for the target architecture (i.e. the same architecture as the kernel), so the sample program should be built for the target as well. Kbuild now supports 'userprogs' for that. I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because $(CC) may not provide libc. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-21Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n"Masahiro Yamada1-11/+3
This reverts commit e0b250b57dcf403529081e5898a9de717f96b76b, which broke build systems that need to install files to a certain path, but do not set INSTALL_MOD_PATH when invoking 'make install'. $ make INSTALL_PATH=/tmp/destdir install mkdir: cannot create directory ‘/lib/modules/5.8.0-rc1+/’: Permission denied Makefile:1342: recipe for target '_builtin_inst_' failed make: *** [_builtin_inst_] Error 1 While modules.builtin is useful also for CONFIG_MODULES=n, this change in the behavior is quite unexpected. Maybe "make modules_install" can install modules.builtin irrespective of CONFIG_MODULES as Jonas originally suggested. Anyway, that commit should be reverted ASAP. Reported-by: Douglas Anderson <dianders@chromium.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net>
2020-06-21Merge branch 'Marvell-mvpp2-improvements'David S. Miller1-75/+88
Russell King says: ==================== Marvell mvpp2 improvements This series primarily cleans up mvpp2, but also fixes a left-over from 91a208f2185a ("net: phylink: propagate resolved link config via mac_link_up()"). Patch 1 introduces some port helpers: mvpp2_port_supports_xlg() - does the port support the XLG MAC mvpp2_port_supports_rgmii() - does the port support RGMII modes Patch 2 introduces mvpp2_phylink_to_port(), rather than having repeated open coding of container_of(). Patch 3 introduces mvpp2_modify(), which reads-modifies-writes a register - I've converted the phylink specific code to use this helper. Patch 4 moves the hardware control of the pause modes from mvpp2_xlg_config() (which is called via the phylink_config method) to mvpp2_mac_link_up() - a change that was missed in the above referenced commit. v2: remove "inline" in patch 2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-21net: mvpp2: set xlg flow control in mvpp2_mac_link_up()Russell King1-12/+11
Set the flow control settings in mvpp2_mac_link_up() for 10G links just as we do for 1G and slower links. This is now the preferred location. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-21net: mvpp2: add register modification helperRussell King1-42/+46
Add a helper to read-modify-write a register, and use it in the phylink helpers. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 20:17:43 +0300