summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-07-28Merge tag 'v3.17-rockchip-rk3xxx-dts' of ↵Arnd Bergmann7-1143/+1176
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "ARM: dts: changes for existing rockchip boards" from Heiko Stuebner: Collected changes for existing Rockchip boards - convert to new clock driver - bring structure in line with recent rk3288 comments (no soc-nodes, using phandles when adding changes, sorted by address) - i2c, board-pmic and pwm nodes nodes - sd card slot and ir receiver on radxa rock * tag 'v3.17-rockchip-rk3xxx-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rk3188-radxarock: add GPIO IR receiver node ARM: dts: rockchip: add pwm nodes ARM: dts: rockchip: add both clocks to uart nodes ARM: dts: rk3188-radxarock: enable sd-card slot ARM: dts: add i2c and regulator nodes to rk3188-radxarock ARM: dts: rockchip: add tps65910 regulator for bqcurie2 ARM: dts: add rk3066 and rk3188 i2c device nodes and pinctrl settings ARM: dts: rockchip: oder nodes by register address ARM: dts: rockchip: remove address from pinctrl nodes ARM: dts: uses handles to reference nodes for changes ARM: dts: rockchip: add handles for shared nodes that don't have one yet ARM: dts: rockchip: remove soc subnodes arm: dts: rockchip: remove obsolete clock gate definitions ARM: dts: rockchip: move oscillator input clock into main dtsi ARM: dts: rockchip: add cru nodes and update device clocks to use it Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-28Merge tag 'v3.17-rockchip-rk3288' of ↵Arnd Bergmann10-5/+826
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "Initial support for Rockchip RK3288 SoCs" from Heiko Stuebner: * tag 'v3.17-rockchip-rk3288' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: Build dtbs for Rockchip boards ARM: dts: add rk3288 evaluation board ARM: dts: rockchip: add core rk3288 dtsi ARM: rockchip: enable support for RK3288 SoCs ARM: Kconfig: set default gpio number for rockchip SoCs ARM: rockchip: add debug uart used by rk3288 ARM: rockchip: clarify usability of DEBUG_RK3X_UART debug_ll options dt-bindings: arm: add cortex-a12 and cortex-a17 cpu compatible properties Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-28Merge branch 'clk-rockchip' of ↵Arnd Bergmann16-15/+3338
git://git.linaro.org/people/mike.turquette/linux into next/soc This is a dependency for the rk3288 DT updates, the branch should first get merged through Mike's clk git. * 'clk-rockchip' of git://git.linaro.org/people/mike.turquette/linux: ARM: rockchip: Select ARCH_HAS_RESET_CONTROLLER clk: rockchip: add clock controller for rk3288 dt-bindings: add documentation for rk3288 cru clk: rockchip: add clock driver for rk3188 and rk3066 clocks dt-bindings: add documentation for rk3188 clock and reset unit clk: rockchip: add reset controller clk: rockchip: add clock type for pll clocks and pll used on rk3066 clk: rockchip: add basic infrastructure for clock branches clk: composite: improve rate_hw sanity check logic clk: composite: allow read-only clocks clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-27ARM: dts: rk3188-radxarock: add GPIO IR receiver nodeBeniamino Galvani1-0/+13
This adds a device tree node for the infrared receiver connected to a GPIO pin on the Radxa Rock. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: add pwm nodesBeniamino Galvani3-0/+120
This adds the necessary nodex and pinctrl settings for the Rockchip PWM-driver. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Modified to use the new clock defines and added rk3066 pins. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: add both clocks to uart nodesHeiko Stuebner1-4/+8
Use the newly ammended dw_8250 clock binding to define both the baudclk as well as the pclk supplying the ip. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rk3188-radxarock: enable sd-card slotHeiko Stuebner1-0/+22
The Radxa Rock contains one sd-card slot. Add the supplying regulator and enable its dw_mmc node. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: add i2c and regulator nodes to rk3188-radxarockBeniamino Galvani1-0/+112
This enables the 2nd i2c bus and adds the act8846 pmic as device. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: add tps65910 regulator for bqcurie2Heiko Stuebner1-0/+87
The Curie2 uses a tps659102 as its main pmic, so add the i2c1 and tps65910 node as well as define the used voltages and regulator-names according to the schematics. Also fix the supply of the sd0 regulator, as it is supplied by the vio reg. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: add rk3066 and rk3188 i2c device nodes and pinctrl settingsHeiko Stuebner3-0/+209
The core controller settings themself are identical, only the compatible and pinctrl settings differ. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: oder nodes by register addressHeiko Stuebner2-67/+67
To create some sort of ordering of nodes, they are suggested to be ordered by their register address. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: remove address from pinctrl nodesHeiko Stuebner2-2/+2
The pincontroller uses the GRF and PMU syscons nowadays, so should not contain an address in its device node. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: uses handles to reference nodes for changesHeiko Stuebner4-74/+119
Use the handles for subsequent changes to nodes, similar to like the rk3288 submission does it. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: add handles for shared nodes that don't have one yetHeiko Stuebner3-6/+6
Some nodes that are changed in the dtsi hierarchy do not have handles yet. As it was suggested in the rk3288 submission to do subsequent nodes changes through such handle-references, add the missing ones. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: remove soc subnodesHeiko Stuebner5-589/+573
Comments received from the rk3288 submission indicated that a generic subnode to group soc components should not be used. So to keep all rockchip devicetree files similar, remove it from rk3066 and rk3188. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27arm: dts: rockchip: remove obsolete clock gate definitionsHeiko Stuebner4-578/+0
The clock and reset unit is now provided by the rk3188-cru clock driver and thus the old style definitions of the gate clocks can go away. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de>
2014-07-27ARM: dts: rockchip: move oscillator input clock into main dtsiHeiko Stuebner3-12/+7
The clock definitions get a lot shorter due to the soc clocks being handled by rk3188-cru and only the input clock remains. These can now simply live in the main rk3xxx.dtsi without affecting readability. At the same time, rename the node to oscillator, adding a clock-output-names property to match how the rk3288 handles this. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de>
2014-07-27ARM: dts: rockchip: add cru nodes and update device clocks to use itHeiko Stuebner3-21/+41
This adds a node for the clock and reset unit on rk3188 and rk3066 SoCs and also updates the device nodes retrieve their clocks from there, instead of the previous gate clock nodes. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de>
2014-07-26ARM: dts: Build dtbs for Rockchip boardsDoug Anderson1-0/+5
This allows the "make dtbs" target to work. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: dts: add rk3288 evaluation boardHeiko Stuebner3-0/+226
There exist 2 variants using either the act8846 or rk808 as pmic, while the rest of the board stays the same. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: dts: rockchip: add core rk3288 dtsiHeiko Stuebner1-0/+575
Node definitions shared by all rk3288 based boards. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: rockchip: enable support for RK3288 SoCsHeiko Stuebner2-0/+2
Enable HAVE_ARM_ARCH_TIMER and add a rockchip,rk3288 compatible. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: Kconfig: set default gpio number for rockchip SoCsHeiko Stuebner1-0/+1
The new rk3288 needs a bigger gpio space, as it has 9 gpio banks. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: rockchip: add debug uart used by rk3288Heiko Stuebner1-1/+11
The uarts on rk3288 are still compatible with the dw_8250, but located at a different position and need DEBUG_UART_8250_WORD enabled. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: rockchip: clarify usability of DEBUG_RK3X_UART debug_ll optionsHeiko Stuebner1-4/+4
The debug uart settings from the DEBUG_RK3X_UART options are usable on all Rockchip SoCs from the rk30xx and rk31xx series but not on the new rk3288 SoCs. Thus clarify their use to prevent confusion. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26dt-bindings: arm: add cortex-a12 and cortex-a17 cpu compatible propertiesHeiko Stuebner1-0/+2
As announced parts from ARM they will probably be used in socs shortly. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-24Merge tag 'zynq-dt-for-3.17-2' of git://git.xilinx.com/linux-xlnx into next/dtArnd Bergmann1-0/+18
Merge "arm: Xilinx Zynq dt patches for v3.17 second pull request" from Michal Simek: - Add GPIO and XADC node to dtsi * tag 'zynq-dt-for-3.17-2' of git://git.xilinx.com/linux-xlnx: ARM: zynq: DT: Add GPIO node ARM: zynq: DT: Add XADC node Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-24Merge tag 'mvebu-dt-3.17-3' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann1-0/+3
Merge "mvebu DT changes for v3.17 (round 3)" from Jason Cooper: - Armada 375 - Fix ethernet aliases for new node added for v3.17 - Add missing MDIO clock for new node added for v3.17 * tag 'mvebu-dt-3.17-3' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Add missing MDIO clock in Armada 375 ARM: mvebu: Add ethernet aliases required by U-Boot Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-23ARM: zynq: DT: Add GPIO nodeSoren Brinkmann1-0/+10
Add node describing Zynq's GPIO controller. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-23ARM: zynq: DT: Add XADC nodeSoren Brinkmann1-0/+8
Add node for the Xilinx A/D Converter. Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-23ARM: mvebu: Add missing MDIO clock in Armada 375Ezequiel Garcia1-0/+1
In Armada 375 SoCs, the MDIO is handled by a separate orion-mdio driver, despite the register is contained within the "LMS" block of the network controller. Therefore we need to add the clock to the MDIO devicetree to prevent the controller from being accesed with its clock gated. This is needed, for instance, to be able to load the MDIO driver before the network driver. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1405961296-5846-7-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-23ARM: mvebu: Add ethernet aliases required by U-BootMarcin Wojtas1-0/+2
The vendor bootloader provided for Armada 375 boards expect an alias for the ethernet nodes, which is used to fixup the MAC address. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lkml.kernel.org/r/1405961296-5846-6-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-20Merge tag 'mvebu-dt-3.17-2' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson13-27/+186
Merge "ARM: mvebu: DT changes for v3.17 (round 2)" from Jason Cooper: mvebu DT changes for v3.17 (round 2): - kirkwood * Add d2 Network v2 board - mvebu * Add Armada 375 ethernet node * Add CA9 MPcore SoC controller node * Add support for dynamic freq scaling on Armada XP * tag 'mvebu-dt-3.17-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: update Armada XP DT for dynamic frequency scaling ARM: mvebu: add CA9 MPcore SoC Controller node ARM: mvebu: Enable the network controller in Armada 375 DB board ARM: mvebu: Add support for the network controller in Armada 375 SoC ARM: Kirkwood: add DT support for d2 Network v2 ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-20Merge tag 'mvebu-dt-3.17' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson7-3/+309
Merge "ARM: mvebu: DT changes for v3.17" from Jason Cooper: mvebu DT changes for v3.17 - kirkwood * add boards net2big and net5big - dove * add vendor prefix for SolidRun * split CuBox into it's variants * tag 'mvebu-dt-3.17' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: fix net5big regulator gpio assignments ARM: dts: mvebu: split SolidRun CuBox into variants dt-binding: add vendor prefix for SolidRun ARM: Kirkwood: Add DT descriptions for net2big and net5big. Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-20Merge tag 'samsung-dt' of ↵Olof Johansson15-475/+1106
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Merge "Samsung DT updates for v3.17" from Kukjin Kim: exynos3250: add i2s dt for audio interface exynos4 - cleanup arm-pmu node because of 4 pmu on exynos4412 but 2 pmu on other exynos4 SoCs - add support sub-nodes to exynos usb host for exynos4 exynos4412-odroid-common - fix T-FLASH hotplug detection - disable 'always on' for BUCK8 - add support for GPIO based buttons - add MAX98090 audio codec exynos4412-odroidx2 and exynos4412-odroidu3 - refactor exynos4412-odroidx and exynos4412-odroid-common for odroid-x2 and u2/u3 exynos4412-odroidx - add support for USB phy, host and device - enable common hardware blocks, secure firmware calls, watchdog, g2d and fimc (mem2mem) multimedia accelerators - add support for USB phy, host and device - correct memory size exynos5410 - fill in CPU clock-frequency property to avoid warning exynos5420 - remove display pd because of instability exynos5420-peach-pit and exynos5800-peach-pi - sort nodes each other to check its differences easily - enable audio support and add sound-card name property - add mask-tpm-reset node - add cros_ec including keyboard, i2c tunnel and tps65090 and battery under the i2c tunnel * tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add I2S dt node for exynos3250 ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-pi ARM: dts: clean up arm-pmu node for exynos4 ARM: dts: remove display power domain for exynos5420 ARM: dts: Add sound nodes for Odroid-X2/U3 boards ARM: dts: fix T-FLASH hotplug detection for exynos4412-odroid-common ARM: dts: add support for GPIO buttons for exynos4412-odroid ARM: dts: disable 'always on' for BUCK8 regulator for exynos4412-odroid-common ARM: dts: refactor Odroid DTS file and add support for Odroid X2 and U2/U3 ARM: dts: correct memory size for exynos4412-odroidx ARM: dts: add support for USB phy, host and device for exynos4412-odroidx ARM: dts: enable common hardware blocks for exynos4412-odroidx ARM: dts: add port sub-nodes to exynos usb host modules for exynos4 ARM: dts: Add mask-tpm-reset node in exynos5800-peach-pi ARM: dts: Add mask-tpm-reset node in exynos5420-peach-pit ARM: dts: Add sound-card name for Snow/Peach-Pit/Peach-Pi ARM: dts: Fill in CPU clock-frequency for exynos5410 ARM: dts: Sort nodes within Peach-pit/Peach-pi dts files ARM: dts: Enable audio support for exynos5800-peach-pi
2014-07-19Merge tag 'tegra-for-3.17-dt' of ↵Olof Johansson71-1055/+2797
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: device tree changes for 3.17" from Thierry Reding: - New board support: * Apalis T30 - HDA support for Tegra124 and Venice2 - Display on Medcom Wide and Roth - GK20A support on Tegra124 - XUSB pad controller for Tegra124 and Jetson TK1 - Various cleanups This pulls in the for-3.17/fuse-move, for-3.17/dt-cros-ec-kbd and for-3.17/xusb-padctl branches to resolve dependencies. Note that the Apalis T30 support has a runtime dependency on the for-3.17/pcie-regulators branch, so they should preferably be applied in that order. I didn't merge that branch into this because Apalis T30 support is new, therefore can't regress, and because the dependency exists only at runtime. * tag 'tegra-for-3.17-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (28 commits) ARM: tegra: roth: add display DT node ARM: tegra: Fix typoed ams,ext-control properties ARM: tegra: jetson-tk1: Add XUSB pad controller ARM: tegra: tegra124: Add XUSB pad controller ARM: tegra: add GK20A GPU to Tegra124 DT ARM: tegra: of: add GK20A device tree binding ARM: tegra: roth: enable input on mmc clock pins ARM: tegra: roth: fix unsupported pinmux properties ARM: tegra: Migrate Apalis T30 PCIe power supply scheme ARM: tegra: tamonten: add the display to the Medcom Wide ARM: tegra: tamonten: add the base board regulators ARM: tegra: initial support for apalis t30 ARM: tegra: jetson-tk1: mark eMMC as non-removable ARM: tegra: venice2 - Enable HDA ARM: tegra: Add Tegra124 HDA support ARM: tegra: Add the EC i2c tunnel to tegra124-venice2 soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'tegra-for-3.17-xusb-padctl' of ↵Olof Johansson5-0/+1114
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: Add XUSB pad controller support" from Thierry Reding: Adds device tree bindings and a driver for the XUSB pad controller found on Tegra114 and later. This is a prerequisites for PCIe, SATA and XUSB drivers which are all currently being reviewed or pending for merge. This is a separate branch in case it needs to be pulled into the pinctrl tree to resolve conflicts. * tag 'tegra-for-3.17-xusb-padctl' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: pinctrl: Add NVIDIA Tegra XUSB pad controller support of: Add NVIDIA Tegra XUSB pad controller binding Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'sunxi-dt-for-3.17' of ↵Olof Johansson22-13/+1121
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Merge "Allwinner DT additions for 3.17" from Maxime Ripard: Among the few patches that we have so far, there's a few noticeable changes: - Introduction of the Allwinner A23 SoC - Support for the GMAC on the A31. This is only available so far on the boards which bootloader enable the PHY regulator. - Addition of the infrared receiver * tag 'sunxi-dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (22 commits) ARM: dts: sun6i: Add Merrii A31 Hummingbird support ARM: dts: sun6i: Add ethernet alias for GMAC ARM: dts: sun6i: Add A31 GMAC gigabit ethernet controller node ARM: dts: sun6i: Add GMAC clock node to the A31 dtsi ARM: dts: sun6i: Add pin muxing options for GMAC ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI ARM: sun8i: Add reset controller nodes to the DTSI ARM: sun8i: Add basic clock nodes to the DTSI ARM: dts: sun4i: Add ir node to various boards ARM: dts: sun4i: Add ir controller nodes and pinmux ARM: dts: sun4i: Add new ba10-tvbox board ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3 ARM: dts: sun7i: Add ir receiver support to a20-i12-tvbox ARM: dts: sun7i: Rename sun7i-a20-ir to sun4i-a10-ir ARM: dts: sun7i: Add AXP209 support to various boards ARM: dts: sun4i: Add AXP209 support to various boards ARM: dts: sunxi: Add #interrupt-cells to pinctrl nodes ARM: sun8i: dt: Add Ippo-q8h v5 support ARM: sunxi: Add Allwinner A23 dtsi ARM: sunxi: Add IR controllers on A20 to dtsi ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'zynq-dt-for-3.17' of git://git.xilinx.com/linux-xlnx into next/dtOlof Johansson206-790/+1649
Merge "Xilinx Zynq changes for v3.17" from Michal Simek: arm: Xilinx Zynq dt patches for v3.17 - Document and use new cadence serial binding * tag 'zynq-dt-for-3.17' of git://git.xilinx.com/linux-xlnx: ARM: zynq: DT: Migrate UART to Cadence binding tty: cadence: Document DT binding + Linux 3.16-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'imx-dt-3.17' of ↵Olof Johansson189-5052/+9498
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "ARM: imx: device tree updates for 3.17" from Shawn Guo: The i.MX device tree updates for 3.17: - Add device tree sources and pin function header for i.MX6SX SoC - Initial imx6sx-sdb board support with FEC, MMC, USB, PMIC, Audio and GPIO key enabled - New board support: mbimxsd25 and mbimxsd27 from Eukrea, aristainetos imx6dl boards, Rex Pro and Basic, Ka-Ro TX6 - Restructure imx6qdl-wandboard.dtsi for new rev C1 board - Split M28EVK and M53EVK into SoM and EVK parts - A few correction around SDMA, SSI and SATA device nodes - Add eSATA support for Cubox-i board - Updates on edmqmx6 to enable PCIe, I2C and CAN - Use DT macro for clock ID for imx27 and imx6qdl - Add FlexCAN support for VF610 SoC * tag 'imx-dt-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (125 commits) ARM: dts: vf610: add FlexCAN node ARM: dts: add initial Rex Basic board support ARM: dts: add initial Rex Pro board support ARM: dts: mx5: Split M53EVK into SoM and EVK parts ARM: dts: imx6: RIoTboard explicitly define pad settings ARM: dts: vf610: fix length of eshdc1 register property ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. ARM: dts: imx53: correct clock-names of SATA node ARM: imx6: Align ssi nodes between mx6 variants ARM: i.MX27 clk: dts: Use clock defines in DTS files ARM: dts: imx: correct sdma compatbile for imx6sl and imx6sx ARM: dts: imx6sx-sdb: Add audio support ARM: dts: imx6sx: Pass the fsl,fifo-depth property ARM: dts: imx6sx: Fix sdma node ARM: dts: imx6: edmqmx6: Add can bus ARM: dts: imx6: edmqmx6: Add two other i2c buses ARM: dts: imx6: edmqmx6: Add PCIe support ARM: dts: imx25-pdk: Add USB OTG support ARM: dts: i.MX53: add aipstz nodes ARM: dts: mxs: Split M28EVK into SoM and EVK parts ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'keystone-dts' of ↵Olof Johansson6-4/+27
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt Merge "Keystone DTS update for 3.17" from Santosh Shilimkar: Keystone DTS update for 3.17 - Ethernet clock tree fix. - MDIO device tree node. Respective driver update is already queued. - Ethernet phy node. Respective driver update is already queued. * tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-evm: add 1g ethernet phys nodes ARM: dts: keystone: add mdio devices entries ARM: dts: keystone: fix netcp's clocks definitions Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'omap-for-v3.17/dt-part1' of ↵Olof Johansson30-4230/+2084
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap dts changes for v3.17 merge window, part1" from Tony Lindgren: First set of .dts changes for omaps for v3.17 merge window: - Enable irqchip crossbar interrupt mapping. These changes are based on an immutable irqchip branch set up by Jason Cooper to make it easier to merge the related .dts changes. - Removal of omap2 related static clock data that now comes from device tree. - Enabling of PHY regulators for various omaps - Enabling of PCIe for dra7 - Add support for am437x starterkit - Enable audio for for omap5 - Enable display and am335x-evmsk * tag 'omap-for-v3.17/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (43 commits) ARM: DTS: omap5-uevm: Enable basic audio (McPDM <-> twl6040) ARM: DTS: omap5-uevm: Add node for twl6040 audio codec ARM: DTS: omap5-uevm: Enable palmas clk32kgaudio clock ARM: dts: dra7: Add dt data for PCIe controller ARM: dts: dra7: Add dt data for PCIe PHY ARM: dts: dra7: Add dt data for PCIe PHY control module ARM: dts: dra7xx-clocks: Add missing clocks for second PCIe PHY instance ARM: dts: dra7xx-clocks: rename pcie clocks to accommodate second PHY instance ARM: dts: dra7xx-clocks: Add missing 32KHz clocks used for PHY ARM: dts: dra7xx-clocks: Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck ARM: dts: dra7xx-clocks: Add divider table to optfclk_pciephy_div clock ARM: dts: dra7-evm: Add regulator information to USB2 PHYs ARM: omap2plus_defconfig: enable TPS65218 configs ARM: dts: AM437x: Add TPS65218 device tree nodes ARM: dts: AM437x: Fix i2c nodes indentation ARM: dts: AM43x: Add TPS65218 device tree nodes ARM: dts: Add devicetree for Gumstix Pepper board ARM: dts: dra7: add crossbar device binding ARM: dts: dra7: add routable-irqs property for gic node ARM: OMAP24xx: clock: remove legacy clock data ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'renesas-dt3-for-v3.17' of ↵Olof Johansson24-94/+468
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.17" from Simon Horman: * Initialise SCI using DT when booting the kzm9g, armadillo800eva, ape6evm and bockw boards without legacy-C code. * tag 'renesas-dt3-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (24 commits) ARM: shmobile: kzm9g-reference: Initialise SCIF device using DT ARM: shmobile: sh73a0: Add SCIF nodes ARM: shmobile: armadillo800eva-reference: Initialise SCIF device using DT ARM: shmobile: r8a7740: Add SCIF nodes ARM: shmobile: ape6evm-reference: Initialise SCIF device using DT ARM: shmobile: r8a73a4: Add SCIF nodes ARM: shmobile: bockw-reference: Initialise SCIF device using DT ARM: shmobile: r8a7778: Add SCIF nodes ARM: shmobile: sh73a0: add SCI clock support for DT ARM: shmobile: r8a7740: correct SCI clock support for DT ARM: shmobile: r8a73a4: add SCI clock support for DT ARM: shmobile: r8a7778: add SCI clock support for DT ARM: shmobile: r8a7790: lager: use iic cores instead of i2c ARM: shmobile: Lager: Correct I2C bus for VDD MPU regulator ARM: shmobile: kzm9g-reference: Remove early_printk from command line ARM: shmobile: armadillo800eva-reference: Remove early_printk from command line ARM: shmobile: r8a7779: Consistently use tabs for indentation ARM: shmobile: henninger: Consistently use tabs for indentation ARM: shmobile: henninger: enable internal PCI ARM: shmobile: koelsch: enable internal PCI ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19ARM: dts: sun6i: Add Merrii A31 Hummingbird supportMaxime Ripard2-0/+120
This adds support for the A31 Hummingbird: http://www.merrii.com/en/pla_d.asp?id=172 The Merrii A31 Hummingbird is a development board based on the Allwinner A31 SoC with multiple USB ports through a USB hub chip, a uSD slot, a 10/100/1000M ethernet port, an AP6210 WiFi/BT chip, TV-in, HDMI, VGA, audio in/out ports, and LCD/CSI headers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: enable usbphy, ehci0, ohci0 for on-board usb hub; add pcf8563 rtc node; add comments for i2c0 and mmc0 pull-ups; correct ethernet phy address to 0x01; drop uart2 (BT chip has no power) and uart3 (no device); use proper commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2014-07-19ARM: dts: sun6i: Add ethernet alias for GMACChen-Yu Tsai1-0/+1
Alias GMAC as ethernet0 so U-boot can fill in the MAC address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-19ARM: dts: sun6i: Add A31 GMAC gigabit ethernet controller nodeChen-Yu Tsai1-0/+17
The A31 has the same GMAC found on the A20 SoC, except it has an extra reset control. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-19ARM: dts: sun6i: Add GMAC clock node to the A31 dtsiChen-Yu Tsai1-0/+28
The GMAC uses 1 of 2 sources for its transmit clock, depending on the PHY interface mode. Add both sources as dummy clocks, and as parents to the GMAC clock node. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-19ARM: dts: sun6i: Add pin muxing options for GMACChen-Yu Tsai1-0/+42
The A31 SoC has a GMAC gigabit ethernet controller supporting MII, GMII, RGMII modes. Add pin muxing options for these modes. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-18ARM: dts: Add I2S dt node for exynos3250Tomasz Figa1-0/+13
This patch add I2S (Inter-IC Sound) dt node which supports 1-port stereo (1 channels) IIS-bus for audio interface with DMA-based operation. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Inha Song <ideal.song@samsung.com> Tested-by: Inha Song <ideal.song@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-18ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-piDoug Anderson2-0/+290
This adds cros_ec to exynos5420-peach-pit and exynos5800-peach-pi, including: * The keyboard * The i2c tunnel * The tps65090 under the i2c tunnel * The battery under the i2c tunnel To add extra motivation, it should be noted that tps65090 is one of the things needed to get display-related FETs turned on for pit and pi. Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Tushar Behera <tushar.b@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 04:53:23 +0300