summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-12-09Merge tag 'arm-soc/for-5.11/devicetree-arm64' of ↵Arnd Bergmann7-0/+303
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 5.11, please pull the following: - Rafal adds initial support for the Broadcom 4908 which are SoCs used in home routers and are based on the DSL architecture and using Broadcom Brahma-B53 CPUs. * tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: add config for Broadcom BCM4908 SoCs arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files dt-bindings: arm: bcm: document BCM4908 bindings Link: https://lore.kernel.org/r/20201128163410.1691529-4-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'arm-soc/for-5.11/devicetree' of ↵Arnd Bergmann34-283/+405
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs changes for 5.11, please pull the following: - Vivek updates the Linksys EA9500 DTS by adding the two additional switch port nodes (5 & 7), providing a flash partition layout to make the device usable with OpenWrt, and finally switches to using the pin controller rather than using mdio-mux to get the same outcome. - Serge fixes the USB Device Tree nodes unit name to be conformant to the recommended name patterns. - Rafal re-arranges all the nodes that belonged to the CRU block to be under the CRU node (such as PLLs). He also disables the USB3 PHY node for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150 DTS. - Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC DTSI. - Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the Raspberry Pi 4 due to some cross-talk between the two blocks. - Pavel updates the DWC2 USB controller RX FIFO sizes to be more accurate for all BCM283x (Raspberr Pi) SoCs. - Florian updates all BCM5301x and NSP Device Tree files to allow switching the Broadcom B53 Ethernet switch device tree binding to YAML. * tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux: (22 commits) dt-bindings: net: dsa: b53: Add YAML bindings ARM: dts: NSP: Provide defaults ports container node ARM: dts: NSP: Add a SRAB compatible string for each board ARM: dts: NSP: Fix Ethernet switch SGMII register name ARM: dts: NSP: Update ethernet switch node name ARM: dts: BCM5301X: Provide defaults ports container node ARM: dts: BCM5301X: Add a default compatible for switch node ARM: dts: BCM5301X: Update Ethernet switch node name dt-bindings: net: dsa: Document sfp and managed properties dt-bindings: net: dsa: Extend switch nodes pattern ARM: dts: bcm283x: increase dwc2's RX FIFO size ARM: dts: rpi-4: disable wifi frequencies ARM: dts: Cygnus: Drop incorrect io-channel-ranges property. ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150 ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3 ARM: dts: BCM5301X: Move CRU devices to the CRU node ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions ARM: dts: BCM5310X: Harmonize xHCI DT nodes name ... Link: https://lore.kernel.org/r/20201128163410.1691529-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'sunxi-dt-for-5.11' of ↵Arnd Bergmann18-9/+570
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to support the Allwinner SoCs, this time adding: - Some nice pinephone additions - I2S support for the A64, H3, H5 and H6 - New boards: Elimo Impetus, Elimo Initium, FriendlyArm ZeroPi, NanoPi R1 * tag 'sunxi-dt-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add gpio-line-names ARM: dts: sun8i: h3: Add initial NanoPi R1 support arm64: dts: allwinner: pinephone: Use generic sensor node names ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC dt-bindings: arm: sunxi: add Elimo bindings ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM arm64: dts: allwinner: pinephone: Add Bluetooth support arm64: dts: allwinner: pinephone: Add WiFi support arm64: dts: allwinner: pinephone: Add light/proximity sensor arm64: dts: allwinner: pinephone: Add LED flash arm64: dts: allwinner: pinephone: Set ALDO3 to exactly 3v0 arm64: dts: allwinner: pinephone: Remove AC power supply arm: dts: sunxi: h3/h5: Add I2S2 node arm64: dts: allwinner: a64: Add I2S2 node arm64: dts: allwinner: h6: Add I2S1 node arm64: dts: allwinner: h6: PineH64 model B: Add wifi ARM: dts: sun8i-v3s: Add I2C1 PB pins description ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi dt-bindings: vendors: add Elimo Engineering vendor prefix ARM: dts: sun8i: add FriendlyArm ZeroPi support ... Link: https://lore.kernel.org/r/551fdf4f-8a0b-4a22-ba49-b4f61520a9ab.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'at91-dt-5.11' of ↵Arnd Bergmann12-41/+62
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.11: - fix USB host pinctrl - fix DT schema warnings * tag 'at91-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host ARM: dts: at91: sam9x60: add pincontrol for USB Host ARM: dts: at91: at91-sama5d27_som1: fix EEPROM compatible ARM: dts: at91: Fix schema warnings for pwm-leds ARM: dts: at91: smartkiz: Reference led node directly Link: https://lore.kernel.org/r/20201127220403.GA1735041@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Merge tag 'tegra-for-5.11-arm64-dt' of ↵Arnd Bergmann11-53/+119
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.11-rc1 These changes are mostly minor fixes across the board, but they also enable PMUs on Tegra186 and enable SATA support on Jetson TX2. * tag 'tegra-for-5.11-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Fix Tegra194 HDA {clock,reset}-names ordering arm64: tegra: Enable AHCI on Jetson TX2 arm64: tegra: Change order of SATA resets for Tegra132 and Tegra210 arm64: tegra: Add XUSB pad controller interrupt arm64: tegra: Rename ADMA device nodes for Tegra210 arm64: tegra: Hook up edp interrupt on Tegra132 SOCTHERM arm64: tegra: Add missing hot temperatures to Tegra210 thermal-zones arm64: tegra: Add missing gpu-throt-level to Tegra210 soctherm arm64: tegra: Add missing hot temperatures to Tegra132 thermal-zones arm64: tegra: Fix DT binding for IO High Voltage entry arm64: tegra: Fix GIC400 missing GICH/GICV register regions arm64: tegra: Add missing CPU PMUs on Tegra186 arm64: tegra: Fix Tegra234 VDK node names arm64: tegra: Wrong AON HSP reg property size arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1 arm64: tegra: Correct the UART for Jetson Xavier NX arm64: tegra: Disable the ACONNECT for Jetson TX2 Link: https://lore.kernel.org/r/20201127144329.124891-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Merge tag 'tegra-for-5.11-arm-dt' of ↵Arnd Bergmann20-22/+5656
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.11-rc1 This adds support for the Tegra30-based Ouya game console and enhances a number of existing device trees. It also fixes a couple of minor issues that were found during DT validation. * tag 'tegra-for-5.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (23 commits) ARM: tegra: Add EMC OPP and ICC properties to Tegra124 EMC and ACTMON device-tree nodes ARM: tegra: Add EMC OPP and ICC properties to Tegra30 EMC and ACTMON device-tree nodes ARM: tegra: Add EMC OPP properties to Tegra20 device-trees ARM: tegra: Add nvidia,memory-controller phandle to Tegra20 EMC device-tree ARM: tegra: Add interconnect properties to Tegra124 device-tree ARM: tegra: Add interconnect properties to Tegra30 device-tree ARM: tegra: Add interconnect properties to Tegra20 device-tree ARM: tegra: acer-a500: Add Embedded Controller ARM: tegra: Change order of SATA resets for Tegra124 ARM: tegra: Correct EMC registers size in Tegra20 device-tree ARM: tegra: Properly align clocks for SOCTHERM ARM: tegra: Hook up edp interrupt on Tegra124 SOCTHERM ARM: tegra: Add missing hot temperatures to Tegra124 thermal-zones ARM: tegra: Add missing gpu-throt-level to Tegra124 soctherm ARM: tegra: Populate OPP table for Tegra20 Ventana ARM: tegra: nexus7: Use panel-lvds as the only panel compatible ARM: tegra: nexus7: Rename gpio-hog nodes ARM: tegra: nexus7: Add power-supply to lvds-encoder node ARM: tegra: nexus7: Improve CPU passive-cooling threshold ARM: tegra: nexus7: Correct thermal zone names ... Link: https://lore.kernel.org/r/20201127144329.124891-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Merge tag 'tegra-for-5.11-dt-bindings' of ↵Arnd Bergmann11-102/+383
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v5.11-rc1 This contains a couple of conversions of bindings to json-schema, as well as symbolic names for the various memory clients on Tegra20, Tegra30 and Tegra124. There's also a couple of fixes for Tegra194 pinmux and ARM GIC bindings. Finally, a new vendor prefix is added for Ouya and the Ouya game console compatible string is defined. * tag 'tegra-for-5.11-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: bus: Convert ACONNECT doc to json-schema dt-bindings: interrupt-controller: arm,gic: Update Tegra compatibles dt-bindings: dma: Convert ADMA doc to json-schema dt-bindings: Fix entry name for I/O High Voltage property dt-bindings: ARM: tegra: Add Ouya game console dt-bindings: Add vendor prefix for Ouya Inc. dt-bindings: memory: tegra124: Add memory client IDs dt-bindings: memory: tegra30: Add memory client IDs dt-bindings: memory: tegra20: Add memory client IDs Link: https://lore.kernel.org/r/20201127144329.124891-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Merge tag 'renesas-arm-dt-for-v5.11-tag2' of ↵Arnd Bergmann1-0/+38
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.11 (take two) - PCIe endpoint support for the R-Car H3 ES2.0+ SoC. * tag 'renesas-arm-dt-for-v5.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a77951: Add PCIe EP nodes Link: https://lore.kernel.org/r/20201127132155.77418-2-geert@linux-m68k.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Merge tag 'stm32-dt-for-v5.11-1' of ↵Arnd Bergmann20-38/+534
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.11, round 1 Highlights: ---------- MCU part: -Fix dmamux reg property (length) on stm32h743. -Explicitly set DCMI bus type on stm32429i eval board. MPU part: -Enable FIFO mode with half-full threshold for DCMI. -Harmonize EHCI/OHCI nodes. -Move SDMMC IP version to v2.0 to get features improvements. -Add LP-timer wakeup support. -Enable crypto/hash/crc support. -Explicitly set DCMI bus type on stm32mp157 eval board. -Add USB type-c controller (STUSB1600) on stm32mp15 DK boards (It is connected to I2C4). -Fix dmamux reg property (length) on stm32mp151. -Optimize USB OTG FIFO sizes on stm32mp151. -Declare tamp node also as "simple-mfd". -LXA: -Document Octavo vendor-prefixes yaml file. -Document lxa,stm32mp157c-mc1 in STM32 yaml file. -DH: -Connect PHY IRQ line on DH SoM. -Add KS8851 Ethernet support on DHCOM which is mapped to FMC2. -Document all DH compatible strings in STM32 yaml file. -Add DHCOM based PicoITX board. This board embedds ethernet port, USB, CAN LEDS and a custom board-to-board connector. * tag 'stm32-dt-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits) ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatibles dt-bindings: arm: stm32: add extra SiP compatible for lxa,stm32mp157c-mc1 dt-bindings: vendor-prefixes: document Octavo Systems oct prefix ARM: dts: stm32: Add DHCOM based PicoITX board dt-bindings: arm: stm32: Add compatible strings for DH SoMs and boards ARM: dts: stm32: support child mfd cells for the stm32mp1 TAMP syscon dt-bindings: arm: stm32: add simple-mfd compatible for tamp node ARM: dts: stm32: update stm32mp151 for remote proc synchronization support ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151 ARM: dts: stm32: fix dmamux reg property on stm32h743 ARM: dts: stm32: fix dmamux reg property on stm32mp151 ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151 ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller dt-bindings: connector: add typec-power-opmode property to usb-connector ARM: dts: stm32: reorder spi4 within stm32mp15-pinctrl ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval board ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board ARM: dts: stm32: enable CRYP by default on stm32mp15 ARM: dts: stm32: enable CRC1 by default on stm32mp15 ... Link: https://lore.kernel.org/r/873c17a5-28d5-9261-f691-1b917611c932@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Merge tag 'omap-for-v5.11/dt-signed' of ↵Arnd Bergmann17-172/+367
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.11 merge window - Two non-urgent pandaboard updates to get gpio button and bluetooth working on pandaboard-es - Updates to follow devicetree binding docs for dwc3 and pwm-leds - Add initial support for droid bionic based on what we have for droid4 - Add second sha instance for dra7 - Add eQEP nodes for am335x for boneblue - Fix wrong comments for am335x gpio_31 * tag 'omap-for-v5.11/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x: Fix comments for AM335X_PIN_GPMC_WPN pin in GPIO mode ARM: dts: am335x-boneblue: Enable eQEP ARM: dts: am33xx: Add nodes for eQEP ARM: dts: dra7: add second SHA instance ARM: dts: xt875: add section for kionix kxtf9 ARM: dts: mapphone: separate out xt894 specific things ARM: dts: omap: Fix schema warnings for pwm-leds ARM: dts: omap5: Harmonize DWC USB3 DT nodes name ARM: dts: am437x: Correct DWC USB3 compatible string ARM: dts: pandaboard es: add bluetooth uart for HCI ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ES Link: https://lore.kernel.org/r/pull-1606462656-588116@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27arm64: dts: renesas: r8a77951: Add PCIe EP nodesYuya Hamamachi1-0/+38
Add PCIe EP nodes for R8A77951 SoC dtsi. Signed-off-by: Yuya Hamamachi <yuya.hamamachi.sx@renesas.com> Link: https://lore.kernel.org/r/20201125073303.19057-3-yuya.hamamachi.sx@renesas.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-11-27Merge tag 'hisi-arm64-dt-for-5.11' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann7-133/+132
into arm/dt ARM64: DT: Hisilicon ARM64 DT updates for 5.11 - Cleanups of the hisilicon DTS to align with the dtschema. All of them do not have any functional effect except passing dtschema checks or dtc W=2 builds. * tag 'hisi-arm64-dt-for-5.11' of git://github.com/hisilicon/linux-hisi: arm64: dts: hisilicon: Use generic "ngpios" rather than "snps,nr-gpios" arm64: dts: hi3660: Harmonize DWC USB3 DT nodes name arm64: dts: hisilicon: list all clocks required by snps-dw-apb-uart.yaml arm64: dts: hisilicon: list all clocks required by pl011.yaml arm64: dts: hisilicon: list all clocks required by spi-pl022.yaml arm64: dts: hisilicon: normalize the node name of the UART devices arm64: dts: hisilicon: normalize the node name of the usb devices arm64: dts: hisilicon: normalize the node name of the SMMU devices arm64: dts: hisilicon: place clock-names "biu" before "ciu" arm64: dts: hisilicon: remove unused property pinctrl-names arm64: dts: hisilicon: write the values of property-units into a uint32 array arm64: dts: hisilicon: separate each group of data in the property "reg" arm64: dts: hisilicon: normalize the node name of the ITS devices Link: https://lore.kernel.org/r/5FBDC416.5060008@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Merge tag 'hisi-arm32-dt-for-5.11' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann10-85/+85
into arm/dt ARM: DT: Hisilicon ARM32 DT updates for 5.11 - Cleanups of the hisilicon DTS to align with the dtschema including serial, usb, amba-bus, memory, mmc, spi and syscon. All of them do not have any functional effect except passing dtschema checks or dtc W=2 builds. * tag 'hisi-arm32-dt-for-5.11' of git://github.com/hisilicon/linux-hisi: ARM: dts: hisilicon: fix errors detected by syscon.yaml ARM: dts: hisilicon: fix errors detected by spi-pl022.yaml ARM: dts: hisilicon: fix errors detected by synopsys-dw-mshc.yaml ARM: dts: hisilicon: fix errors detected by root-node.yaml ARM: dts: hisilicon: fix errors detected by simple-bus.yaml ARM: dts: hisilicon: fix errors detected by usb yaml ARM: dts: hisilicon: fix errors detected by pl011.yaml ARM: dts: hisilicon: fix errors detected by snps-dw-apb-uart.yaml Link: https://lore.kernel.org/r/5FBDC347.4050102@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-26ARM: tegra: Add EMC OPP and ICC properties to Tegra124 EMC and ACTMON ↵Dmitry Osipenko6-0/+461
device-tree nodes Add EMC OPP DVFS/DFS tables and interconnect paths that will be used for dynamic memory bandwidth scaling based on memory utilization statistics. Update board device-trees by removing unsupported EMC OPPs. Note that ACTMON watches all memory interconnect paths, but we use a single CPU-READ interconnect path for driving memory bandwidth, for simplicity. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Add EMC OPP and ICC properties to Tegra30 EMC and ACTMON ↵Dmitry Osipenko4-0/+409
device-tree nodes Add EMC OPP tables and interconnect paths that will be used for dynamic memory bandwidth scaling based on memory utilization statistics. Update board device-trees by removing unsupported EMC OPPs. Note that ACTMON watches all memory interconnect paths, but we use a single CPU-READ interconnect path for driving memory bandwidth, for simplicity. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Add EMC OPP properties to Tegra20 device-treesDmitry Osipenko5-0/+125
Add EMC OPP DVFS tables and update board device-trees by removing unsupported OPPs. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Add nvidia,memory-controller phandle to Tegra20 EMC device-treeDmitry Osipenko1-0/+2
Add nvidia,memory-controller to the Tegra20 External Memory Controller node. This allows to perform a direct lookup of the Memory Controller instead of walking up the whole tree. This puts Tegra20 device-tree on par with Tegra30+. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Add interconnect properties to Tegra124 device-treeDmitry Osipenko1-0/+25
Add interconnect properties to the Memory Controller, External Memory Controller and the Display Controller nodes in order to describe hardware interconnection. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Add interconnect properties to Tegra30 device-treeDmitry Osipenko1-1/+26
Add interconnect properties to the Memory Controller, External Memory Controller and the Display Controller nodes in order to describe hardware interconnection. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Add interconnect properties to Tegra20 device-treeDmitry Osipenko1-1/+25
Add interconnect properties to the Memory Controller, External Memory Controller and the Display Controller nodes in order to describe hardware interconnection. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: acer-a500: Add Embedded ControllerDmitry Osipenko1-0/+17
This patch adds device-tree node for the Embedded Controller which is found on the Picasso board. The Embedded Controller itself is ENE KB930, it provides functions like battery-gauge/LED/GPIO/etc and it uses firmware that is specifically customized for the Acer A500 device. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Change order of SATA resets for Tegra124Sowjanya Komatineni1-3/+3
Tegra AHCI dt-binding doc is converted from text based to yaml based. dtbs_check valdiation strictly follows reset-names order specified in yaml dt-binding. Tegra124 thru Tegra210 has 3 resets sata, sata-oob and sata-cold. Tegra186 has 2 resets sata and sata-cold. This patch changes order of SATA resets to maintain proper resets order for commonly available resets across Tegra124 thru Tegra186 for dtbs_check to pass. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Correct EMC registers size in Tegra20 device-treeDmitry Osipenko1-1/+1
Fix the size of Tegra20 EMC registers, which should be twice bigger. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Properly align clocks for SOCTHERMThierry Reding1-1/+1
Entries on subsequent lines should be aligned with the entry on the first line. Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Hook up edp interrupt on Tegra124 SOCTHERMThierry Reding1-1/+3
For some reason this was never hooked up. Do it now so that over-current interrupts can be logged. Reported-by: Nicolas Chauvet <kwizart@gmail.com> Suggested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Add missing hot temperatures to Tegra124 thermal-zonesNicolas Chauvet1-0/+10
According to dmesg, thermal-zones for mem and cpu are missing hot temperatures properties. throttrip: pll: missing hot temperature ... throttrip: mem: missing hot temperature ... Adding them will clear the messages. Signed-off-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Add missing gpu-throt-level to Tegra124 socthermNicolas Chauvet1-0/+1
On Jetson TK1 the following message can be seen: tegra_soctherm 700e2000.thermal-sensor: throttle-cfg: heavy: no throt prop or invalid prop This patch will fix the invalid prop issue according to the binding. Signed-off-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Populate OPP table for Tegra20 VentanaJon Hunter1-0/+11
Commit 9ce274630495 ("cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)") update the Tegra20 CPUFREQ driver to use the generic CPUFREQ device-tree driver. Since this change CPUFREQ support on the Tegra20 Ventana platform has been broken because the necessary device-tree nodes with the operating point information are not populated for this platform. Fix this by updating device-tree for Venata to include the operating point informration for Tegra20. Fixes: 9ce274630495 ("cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)") Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: nexus7: Use panel-lvds as the only panel compatibleDmitry Osipenko1-2/+10
Depending on a driver probe order, panel-simple driver may probe first, which results in this error: panel-simple display-panel: Reject override mode: panel has a fixed mode We don't want to use panel-simple anyways because customized timings are preferred for Nexus 7, hence remove the panel-simple compatibles from the panel node. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: nexus7: Rename gpio-hog nodesDmitry Osipenko3-4/+4
Devicetree schema now requires gpio-hog nodes to have a certain naming pattern, like a -hog suffix. This patch fixes dtbs_check warnings about the names. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: nexus7: Add power-supply to lvds-encoder nodeDmitry Osipenko1-0/+1
The lvds-encoder binding now supports power-supply property, let's specify it in the device-tree for completeness. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: nexus7: Improve CPU passive-cooling thresholdDmitry Osipenko1-3/+3
The current CPU thermal limit is a bit inappropriate for Nexus 7 once device is getting used on a daily bases. For example, currently it's may be impossible to watch a hardware accelerated 720p video without hitting a severe CPU throttling, which ruins user experience. This patch improves the thermal throttling thresholds. In my experience setting CPU thermal threshold to 57C provides the most reasonable result, where device is a bit warm under constant load and not getting overly hot, in the same time performance is okay. Let's bump the passive-cooling threshold from 50C to 57C and also lower the thermal hysteresis to 0.2C in order to make throttling more reactive. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: nexus7: Correct thermal zone namesDmitry Osipenko1-2/+2
Rename thermal zones in order fix dt_binding_check warning telling that names do not match the expected pattern. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: acer-a500: Add power-supply to lvds-encoder nodeDmitry Osipenko1-0/+1
The lvds-encoder binding now supports power-supply property, let's specify it in the device-tree for completeness. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: acer-a500: Correct thermal zone namesDmitry Osipenko1-2/+2
Rename thermal zones in order fix dt_binding_check warning telling that names do not match the expected pattern. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26ARM: tegra: Add device-tree for OuyaPeter Geis2-1/+4513
The Ouya was the sole device produced by Ouya Inc in 2013. It was a game console originally running Android 5 on top of Linux 3.1.10. This patch adds the device tree supporting the Ouya. It has been tested on the original variant with Samsung ram. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26Merge branch 'for-5.11/dt-bindings' into for-5.11/arm/dtThierry Reding3-0/+188
2020-11-26dt-bindings: bus: Convert ACONNECT doc to json-schemaSameer Pujar2-44/+82
Move ACONNECT documentation to YAML format. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26dt-bindings: interrupt-controller: arm,gic: Update Tegra compatiblesSameer Pujar1-1/+8
Update Tegra compatibles to support newer Tegra chips and required combinations. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26dt-bindings: dma: Convert ADMA doc to json-schemaSameer Pujar2-56/+99
Move ADMA documentation to YAML format. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26dt-bindings: memory: tegra124: Add memory client IDsDmitry Osipenko1-0/+68
Each memory client has unique hardware ID, add these IDs. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26dt-bindings: Fix entry name for I/O High Voltage propertyVidya Sagar1-1/+1
Correct the name of the I/O High Voltage Property from 'nvidia,io-high-voltage' to 'nvidia,io-hv'. Fixes: 2585a584f844 ("pinctrl: Add Tegra194 pinctrl DT bindings") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26dt-bindings: ARM: tegra: Add Ouya game consolePeter Geis1-0/+3
Add a binding for the Tegra30-based Ouya game console. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26dt-bindings: Add vendor prefix for Ouya Inc.Peter Geis1-0/+2
Ouya is a defunct company from 2012 to 2015. They produced a single device, the Ouya game console. In 2015 they were purchased by Razer Inc. and the Ouya was discontinued. All Ouya services were shuttered in 2019. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26dt-bindings: memory: tegra30: Add memory client IDsDmitry Osipenko1-0/+67
Each memory client has unique hardware ID, add these IDs. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26dt-bindings: memory: tegra20: Add memory client IDsDmitry Osipenko1-0/+53
Each memory client has unique hardware ID, add these IDs. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26arm64: tegra: Fix Tegra194 HDA {clock,reset}-names orderingSameer Pujar1-6/+6
As per the HDA binding doc reorder {clock,reset}-names entries for Tegra194. This also serves as a preparation for converting existing binding doc to json-schema. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26arm64: tegra: Enable AHCI on Jetson TX2Sowjanya Komatineni2-0/+32
This patch enables AHCI on Jetson TX2. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26arm64: tegra: Change order of SATA resets for Tegra132 and Tegra210Sowjanya Komatineni2-6/+6
Tegra AHCI dt-binding doc is converted from text based to yaml based. dtbs_check valdiation strictly follows reset-names order specified in yaml dt-binding. Tegra124 thru Tegra210 has 3 resets sata, sata-oob and sata-cold. Tegra186 has 2 resets sata and sata-cold. This patch changes order of SATA resets to maintain proper resets order for commonly available resets across Tegra124 thru Tegra186 for dtbs_check to pass. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26arm64: tegra: Add XUSB pad controller interruptJC Kuo3-0/+3
This commit adds "interrupts" property to Tegra210/Tegra186/Tegra194 XUSB PADCTL node. XUSB PADCTL interrupt will be raised when USB wake event happens. This is required for supporting XUSB host controller ELPG. Signed-off-by: JC Kuo <jckuo@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 12:49:58 +0300