| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This improves the inband IR command handling for NXP BT chipsets.
When the IR vendor command is received, the driver injects a HW
error event, which causes a reset sequence in hci_error_reset().
The vendor IR command is sent to the controller while hci dev
is been closed, and FW is re-downloaded when nxp_setup() is
called during hci_dev_do_open().
The HCI_SETUP flag is set in nxp_hw_err() to make sure that
nxp_setup() is been called during hci_dev_do_open().
This also makes the nxp_setup() and power save functions more
generic.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This adds support for NXP IW624 chipset in btnxpuart driver
by adding FW name and bootloader signature. Based on the
loader version bits 7:6 of the bootloader signature, the
driver can choose between selecting secure and non-secure
FW files.
For cmd5 payload during FW download, this chip has addresses
of few registers offset by 1, so added boot_reg_offset to
handle the chip specific offset.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This removes the unnecessary check for CTS low after FW download.
After FW download is complete, the CTS line is already seen low.
It becomes high after 2 msec, and low again after FW initialization
is complete.
This makes the current check for CTS low redundant.
This removes the wait for CTS low section and increase delay to
1200msec instead, which is sufficiant for all NXP chipsets to
initialize FW.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: FLorian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230823085632.116725-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Leon Romanovsky says:
====================
mlx5 MACsec RoCEv2 support
From Patrisious:
This series extends previously added MACsec offload support
to cover RoCE traffic either.
In order to achieve that, we need configure MACsec with offload between
the two endpoints, like below:
REMOTE_MAC=10:70:fd:43:71:c0
* ip addr add 1.1.1.1/16 dev eth2
* ip link set dev eth2 up
* ip link add link eth2 macsec0 type macsec encrypt on
* ip macsec offload macsec0 mac
* ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
* ip macsec add macsec0 rx port 1 address $REMOTE_MAC
* ip macsec add macsec0 rx port 1 address $REMOTE_MAC sa 0 pn 1 on key 01 ead3664f508eb06c40ac7104cdae4ce5
* ip addr add 10.1.0.1/16 dev macsec0
* ip link set dev macsec0 up
And in a similar manner on the other machine, while noting the keys order
would be reversed and the MAC address of the other machine.
RDMA traffic is separated through relevant GID entries and in case
of IP ambiguity issue - meaning we have a physical GIDs and a MACsec
GIDs with the same IP/GID, we disable our physical GID in order
to force the user to only use the MACsec GID.
v0: https://lore.kernel.org/netdev/20230813064703.574082-1-leon@kernel.org/
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
RDMA/mlx5: Handles RoCE MACsec steering rules addition and deletion
net/mlx5: Add RoCE MACsec steering infrastructure in core
net/mlx5: Configure MACsec steering for ingress RoCEv2 traffic
net/mlx5: Configure MACsec steering for egress RoCEv2 traffic
IB/core: Reorder GID delete code for RoCE
net/mlx5: Add MACsec priorities in RDMA namespaces
RDMA/mlx5: Implement MACsec gid addition and deletion
net/mlx5: Maintain fs_id xarray per MACsec device inside macsec steering
net/mlx5: Remove netdevice from MACsec steering
net/mlx5e: Move MACsec flow steering and statistics database from ethernet to core
net/mlx5e: Rename MACsec flow steering functions/parameters to suit core naming style
net/mlx5: Remove dependency of macsec flow steering on ethernet
net/mlx5e: Move MACsec flow steering operations to be used as core library
macsec: add functions to get macsec real netdevice and check offload
====================
Link: https://lore.kernel.org/r/20230821073833.59042-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's somewhat unfortunate but with (my?) the current tooling
if people post new versions of a set in reply to an old version
managing the review queue gets difficult. So recommend against it.
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230823154922.1162644-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the necessity to modify skb_ext_total_length() when new extension
types are added.
Also reduces the line count a bit.
With optimizations enabled the function is folded down to the same
constant value as before during compilation.
This has been validated on x86 with GCC 6.5.0 and 13.2.1.
Also a similar construct has been validated on godbolt.org with GCC 5.1.
In any case the compiler has to be able to evaluate the construct at
compile-time for the BUILD_BUG_ON() in skb_extensions_init().
Even if not evaluated at compile-time this function would only ever
be executed once at run-time, so the overhead would be very minuscule.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230823-skb_ext-simplify-v2-1-66e26cd66860@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/net/inet_sock.h
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
c274af224269 ("inet: introduce inet->inet_flags")
https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/
Adjacent changes:
drivers/net/bonding/bond_alb.c
e74216b8def3 ("bonding: fix macvlan over alb bond support")
f11e5bd159b0 ("bonding: support balance-alb with openvswitch")
drivers/net/ethernet/broadcom/bgmac.c
d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()")
23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()")
drivers/net/ethernet/broadcom/genet/bcmmii.c
32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()")
acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()")
net/sctp/socket.c
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pu Lehui says:
====================
Add support cpu v4 insns for RV64
Add support cpu v4 instructions for RV64. The relevant tests have passed as show bellow:
Summary: 6/166 PASSED, 0 SKIPPED, 0 FAILED
NOTE: ldsx_insn testcase uses fentry and needs to rely on ftrace direct call [0].
[0] https://lore.kernel.org/all/20230627111612.761164-1-suagrfillet@gmail.com/
v2:
- Use temporary reg to avoid clobbering the source reg in movs_8/16 insns. (Björn)
- Add Acked-by
v1:
https://lore.kernel.org/bpf/20230823231059.3363698-1-pulehui@huaweicloud.com
====================
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230824095001.3408573-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Enable cpu v4 tests for RV64, and the relevant tests have passed.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230824095001.3408573-8-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support unconditional bswap instruction. Since riscv is always
little-endian, just treat the unconditional scenario the same as
big-endian conversion.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230824095001.3408573-7-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support signed div/mod instructions for RV64.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230824095001.3408573-6-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support 32-bit offset jmp instruction for RV64.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230824095001.3408573-5-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support sign-extension mov instructions for RV64.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230824095001.3408573-4-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add Support sign-extension load instructions for RV64.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230824095001.3408573-3-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For LDX_B/H/W, when zext has been inserted by verifier, it'll return 1,
and no exception handling will continue. Also, when the offset is 12-bit
value, the redundant zext inserted by the verifier is not removed. Fix
both scenarios by moving down the removal of redundant zext.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20230824095001.3408573-2-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Toke Høiland-Jørgensen says:
====================
samples/bpf: Remove unmaintained XDP sample utilities
The samples/bpf directory in the kernel tree started out as a way of showcasing
different aspects of BPF functionality by writing small utility programs for
each feature. However, as the BPF subsystem has matured, the preferred way of
including userspace code with a feature has become the BPF selftests, which also
have the benefit of being consistently run as part of the BPF CI system.
As a result of this shift, the utilities in samples/bpf have seen little love,
and have slowly bitrotted. There have been sporadic cleanup patches over the
years, but it's clear that the utilities are far from maintained.
For XDP in particular, some of the utilities have been used as benchmarking aids
when implementing new kernel features, which seems to be the main reason they
have stuck around; any updates the utilities have seen have been targeted at
this use case. However, as the BPF subsystem as a whole has moved on, it has
become increasingly difficult to incorporate new features into these utilities
because they predate most of the modern BPF features (such as kfuncs and BTF).
Rather than try to update these utilities and keep maintaining them in the
kernel tree, we have ported the useful features of the utilities to the
xdp-tools package. In the porting process we also updated the utilities to take
advantage of modern BPF features, integrated them with libxdp, and polished the
user interface.
As these utilities are standalone tools, maintaining them out of tree is
simpler, and we plan to keep maintaining them in the xdp-tools repo. To direct
users of these utilities to the right place, this series removes the utilities
from samples/bpf, leaving in place only a couple of utilities whose
functionality have not yet been ported to xdp-tools.
The xdp-tools repository is located on Github at the following URL:
https://github.com/xdp-project/xdp-tools
The commits in the series removes one utility each, explaining how the
equivalent functionality can be obtained with xdp-tools.
v2:
- Add equivalent xdp-tools commands for each removed utility
v3:
- Add link to xdp-tools in the README
Toke Høiland-Jørgensen (7):
samples/bpf: Remove the xdp_monitor utility
samples/bpf: Remove the xdp_redirect* utilities
samples/bpf: Remove the xdp_rxq_info utility
samples/bpf: Remove the xdp1 and xdp2 utilities
samples/bpf: Remove the xdp_sample_pkts utility
samples/bpf: Cleanup .gitignore
samples/bpf: Add note to README about the XDP utilities moved to
xdp-tools
samples/bpf/.gitignore | 12 -
samples/bpf/Makefile | 48 +-
samples/bpf/README.rst | 6 +
samples/bpf/xdp1_kern.c | 100 ----
samples/bpf/xdp1_user.c | 166 ------
samples/bpf/xdp2_kern.c | 125 -----
samples/bpf/xdp_monitor.bpf.c | 8 -
samples/bpf/xdp_monitor_user.c | 118 -----
samples/bpf/xdp_redirect.bpf.c | 49 --
samples/bpf/xdp_redirect_cpu.bpf.c | 539 -------------------
samples/bpf/xdp_redirect_cpu_user.c | 559 --------------------
samples/bpf/xdp_redirect_map.bpf.c | 97 ----
samples/bpf/xdp_redirect_map_multi.bpf.c | 77 ---
samples/bpf/xdp_redirect_map_multi_user.c | 232 --------
samples/bpf/xdp_redirect_map_user.c | 228 --------
samples/bpf/xdp_redirect_user.c | 172 ------
samples/bpf/xdp_rxq_info_kern.c | 140 -----
samples/bpf/xdp_rxq_info_user.c | 614 ----------------------
samples/bpf/xdp_sample_pkts_kern.c | 57 --
samples/bpf/xdp_sample_pkts_user.c | 196 -------
20 files changed, 7 insertions(+), 3536 deletions(-)
delete mode 100644 samples/bpf/xdp1_kern.c
delete mode 100644 samples/bpf/xdp1_user.c
delete mode 100644 samples/bpf/xdp2_kern.c
delete mode 100644 samples/bpf/xdp_monitor.bpf.c
delete mode 100644 samples/bpf/xdp_monitor_user.c
delete mode 100644 samples/bpf/xdp_redirect.bpf.c
delete mode 100644 samples/bpf/xdp_redirect_cpu.bpf.c
delete mode 100644 samples/bpf/xdp_redirect_cpu_user.c
delete mode 100644 samples/bpf/xdp_redirect_map.bpf.c
delete mode 100644 samples/bpf/xdp_redirect_map_multi.bpf.c
delete mode 100644 samples/bpf/xdp_redirect_map_multi_user.c
delete mode 100644 samples/bpf/xdp_redirect_map_user.c
delete mode 100644 samples/bpf/xdp_redirect_user.c
delete mode 100644 samples/bpf/xdp_rxq_info_kern.c
delete mode 100644 samples/bpf/xdp_rxq_info_user.c
delete mode 100644 samples/bpf/xdp_sample_pkts_kern.c
delete mode 100644 samples/bpf/xdp_sample_pkts_user.c
====================
Link: https://lore.kernel.org/r/20230824102255.1561885-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
To help users find the XDP utilities, add a note to the README about the
new location and the conversion documentation in the commit messages.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-8-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove no longer present XDP utilities from .gitignore. Apart from the
recently removed XDP utilities this also includes the previously removed
xdpsock and xsk utilities.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-7-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The functionality of this utility is covered by the xdpdump utility in
xdp-tools.
There's a slight difference in usage as the xdpdump utility's main focus is
to dump packets before or after they are processed by an existing XDP
program. However, xdpdump also has the --load-xdp-program switch, which
will make it attach its own program if no existing program is loaded. With
this, xdp_sample_pkts usage can be converted as:
xdp_sample_pkts eth0
--> xdpdump --load-xdp-program eth0
To get roughly equivalent behaviour.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-6-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The functionality of these utilities have been incorporated into the
xdp-bench utility in xdp-tools.
Equivalent functionality is:
xdp1 eth0
--> xdp-bench drop -p parse-ip -l load-bytes eth0
xdp2 eth0
--> xdp-bench drop -p swap-macs eth0
Note that there's a slight difference in behaviour of those examples: the
swap-macs operation of xdp-bench doesn't use the bpf_xdp_load_bytes()
helper to load the packet data, whereas the xdp2 utility did so
unconditionally. For the parse-ip action the use of bpf_xdp_load_bytes()
can be selected by the '-l load-bytes' switch, with the difference that the
xdp-bench utility will perform two separate calls to the helper, one to
load the ethernet header and another to load the IP header; where the xdp1
utility only performed one call always loading 60 bytes of data.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-5-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The functionality of this utility has been incorporated into the xdp-bench
utility in xdp-tools, by way of the --rxq-stats argument to the 'drop',
'pass' and 'tx' commands of xdp-bench.
Some examples of how to convert xdp_rxq_info invocations into equivalent
xdp-bench commands:
xdp_rxq_info -d eth0
--> xdp-bench pass --rxq-stats eth0
xdp_rxq_info -d eth0 -a XDP_DROP -m
--> xdp-bench drop --rxq-stats -p swap-macs eth0
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-4-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
These utilities have all been ported to xdp-tools as functions of the
xdp-bench utility. The four different utilities in samples are incorporated
as separate subcommands to xdp-bench, with most of the command line
parameters left intact, except that mandatory arguments are always
positional in xdp-bench. For full usage details see the --help output of
each command, or the xdp-bench man page.
Some examples of how to convert usage to xdp-bench are:
xdp_redirect eth0 eth1
--> xdp-bench redirect eth0 eth1
xdp_redirect_map eth0 eth1
--> xdp-bench redirect-map eth0 eth1
xdp_redirect_map_multi eth0 eth1 eth2 eth3
--> xdp-bench redirect-multi eth0 eth1 eth2 eth3
xdp_redirect_cpu -d eth0 -c 0 -c 1
--> xdp-bench redirect-cpu -c 0 -c 1 eth0
xdp_redirect_cpu -d eth0 -c 0 -c 1 -r eth1
--> xdp-bench redirect-cpu -c 0 -c 1 eth0 -r redirect -D eth1
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-3-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This utility has been ported as-is to xdp-tools as 'xdp-monitor'. The only
difference in usage between the samples and xdp-tools versions is that the
'-v' command line parameter has been changed to '-e' in the xdp-tools
version for consistency with the other utilities.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-2-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wifi, can and netfilter.
Fixes to fixes:
- nf_tables:
- GC transaction race with abort path
- defer gc run if previous batch is still pending
Previous releases - regressions:
- ipv4: fix data-races around inet->inet_id
- phy: fix deadlocking in phy_error() invocation
- mdio: fix C45 read/write protocol
- ipvlan: fix a reference count leak warning in ipvlan_ns_exit()
- ice: fix NULL pointer deref during VF reset
- i40e: fix potential NULL pointer dereferencing of pf->vf in
i40e_sync_vsi_filters()
- tg3: use slab_build_skb() when needed
- mtk_eth_soc: fix NULL pointer on hw reset
Previous releases - always broken:
- core: validate veth and vxcan peer ifindexes
- sched: fix a qdisc modification with ambiguous command request
- devlink: add missing unregister linecard notification
- wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning
- batman:
- do not get eth header before batadv_check_management_packet
- fix batadv_v_ogm_aggr_send memory leak
- bonding: fix macvlan over alb bond support
- mlxsw: set time stamp fields also when its type is MIRROR_UTC"
* tag 'net-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
selftests: bonding: add macvlan over bond testing
selftest: bond: add new topo bond_topo_2d1c.sh
bonding: fix macvlan over alb bond support
rtnetlink: Reject negative ifindexes in RTM_NEWLINK
netfilter: nf_tables: defer gc run if previous batch is still pending
netfilter: nf_tables: fix out of memory error handling
netfilter: nf_tables: use correct lock to protect gc_list
netfilter: nf_tables: GC transaction race with abort path
netfilter: nf_tables: flush pending destroy work before netlink notifier
netfilter: nf_tables: validate all pending tables
ibmveth: Use dcbf rather than dcbfl
i40e: fix potential NULL pointer dereferencing of pf->vf i40e_sync_vsi_filters()
net/sched: fix a qdisc modification with ambiguous command request
igc: Fix the typo in the PTM Control macro
batman-adv: Hold rtnl lock during MTU update via netlink
igb: Avoid starting unnecessary workqueues
can: raw: add missing refcount for memory leak fix
can: isotp: fix support for transmission of SF without flow control
bnx2x: new flag for track HW resource allocation
sfc: allocate a big enough SKB for loopback selftest packet
...
|
|
Add a local kptr test with no special fields in the struct. Without the
previous patch, the following warning will hit:
[ 44.683877] WARNING: CPU: 3 PID: 485 at kernel/bpf/syscall.c:660 bpf_obj_free_fields+0x220/0x240
[ 44.684640] Modules linked in: bpf_testmod(OE)
[ 44.685044] CPU: 3 PID: 485 Comm: kworker/u8:5 Tainted: G OE 6.5.0-rc5-01703-g260d855e9b90 #248
[ 44.685827] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 44.686693] Workqueue: events_unbound bpf_map_free_deferred
[ 44.687297] RIP: 0010:bpf_obj_free_fields+0x220/0x240
[ 44.687775] Code: e8 55 17 1f 00 49 8b 74 24 08 4c 89 ef e8 e8 14 05 00 e8 a3 da e2 ff e9 55 fe ff ff 0f 0b e9 4e fe ff
ff 0f 0b e9 47 fe ff ff <0f> 0b e8 d9 d9 e2 ff 31 f6 eb d5 48 83 c4 10 5b 41 5c e
[ 44.689353] RSP: 0018:ffff888106467cb8 EFLAGS: 00010246
[ 44.689806] RAX: 0000000000000000 RBX: ffff888112b3a200 RCX: 0000000000000001
[ 44.690433] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8881128ad988
[ 44.691094] RBP: 0000000000000002 R08: ffffffff81370bd0 R09: 1ffff110216231a5
[ 44.691643] R10: dffffc0000000000 R11: ffffed10216231a6 R12: ffff88810d68a488
[ 44.692245] R13: ffff88810767c288 R14: ffff88810d68a400 R15: ffff88810d68a418
[ 44.692829] FS: 0000000000000000(0000) GS:ffff8881f7580000(0000) knlGS:0000000000000000
[ 44.693484] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 44.693964] CR2: 000055c7f2afce28 CR3: 000000010fee4002 CR4: 0000000000370ee0
[ 44.694513] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 44.695102] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 44.695747] Call Trace:
[ 44.696001] <TASK>
[ 44.696183] ? __warn+0xfe/0x270
[ 44.696447] ? bpf_obj_free_fields+0x220/0x240
[ 44.696817] ? report_bug+0x220/0x2d0
[ 44.697180] ? handle_bug+0x3d/0x70
[ 44.697507] ? exc_invalid_op+0x1a/0x50
[ 44.697887] ? asm_exc_invalid_op+0x1a/0x20
[ 44.698282] ? btf_find_struct_meta+0xd0/0xd0
[ 44.698634] ? bpf_obj_free_fields+0x220/0x240
[ 44.699027] ? bpf_obj_free_fields+0x1e2/0x240
[ 44.699414] array_map_free+0x1a3/0x260
[ 44.699763] bpf_map_free_deferred+0x7b/0xe0
[ 44.700154] process_one_work+0x46d/0x750
[ 44.700523] worker_thread+0x49e/0x900
[ 44.700892] ? pr_cont_work+0x270/0x270
[ 44.701224] kthread+0x1ae/0x1d0
[ 44.701516] ? kthread_blkcg+0x50/0x50
[ 44.701860] ret_from_fork+0x34/0x50
[ 44.702178] ? kthread_blkcg+0x50/0x50
[ 44.702508] ret_from_fork_asm+0x11/0x20
[ 44.702880] </TASK>
With the previous patch, there is no warnings.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230824063422.203097-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, in function bpf_obj_free_fields(), for local kptr,
a warning will be issued if the struct does not contain any
special fields. But actually the kernel seems totally okay
with a local kptr without any special fields. Permitting
no special fields also aligns with future percpu kptr which
also allows no special fields.
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230824063417.201925-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-08-22
1) Patches #1..#13 From Jiri:
The goal of this patchset is to make the SF code cleaner.
Benefit from previously introduced devlink_port struct containerization
to avoid unnecessary lookups in devlink port ops.
Also, benefit from the devlink locking changes and avoid unnecessary
reference counting.
2) Patches #14,#15:
Add ability to configure proto both UDP and TCP selectors in RX and TX
directions.
* tag 'mlx5-updates-2023-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Support IPsec upper TCP protocol selector
net/mlx5e: Support IPsec upper protocol selector field offload for RX
net/mlx5: Store vport in struct mlx5_devlink_port and use it in port ops
net/mlx5: Check vhca_resource_manager capability in each op and add extack msg
net/mlx5: Relax mlx5_devlink_eswitch_get() return value checking
net/mlx5: Return -EOPNOTSUPP in mlx5_devlink_port_fn_migratable_set() directly
net/mlx5: Reduce number of vport lookups passing vport pointer instead of index
net/mlx5: Embed struct devlink_port into driver structure
net/mlx5: Don't register ops for non-PF/VF/SF port and avoid checks in ops
net/mlx5: Remove no longer used mlx5_esw_offloads_sf_vport_enable/disable()
net/mlx5: Introduce mlx5_eswitch_load/unload_sf_vport() and use it from SF code
net/mlx5: Allow mlx5_esw_offloads_devlink_port_register() to register SFs
net/mlx5: Push devlink port PF/VF init/cleanup calls out of devlink_port_register/unregister()
net/mlx5: Push out SF devlink port init and cleanup code to separate helpers
net/mlx5: Rework devlink port alloc/free into init/cleanup
====================
Link: https://lore.kernel.org/all/20230823051012.162483-1-saeed@kernel.org/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
This PR contains nf_tables updates for your *net* tree.
First patch fixes table validation, I broke this in 6.4 when tracking
validation state per table, reported by Pablo, fixup from myself.
Second patch makes sure objects waiting for memory release have been
released, this was broken in 6.1, patch from Pablo Neira Ayuso.
Patch three is a fix-for-fix from previous PR: In case a transaction
gets aborted, gc sequence counter needs to be incremented so pending
gc requests are invalidated, from Pablo.
Same for patch 4: gc list needs to use gc list lock, not destroy lock,
also from Pablo.
Patch 5 fixes a UaF in a set backend, but this should only occur when
failslab is enabled for GFP_KERNEL allocations, broken since feature
was added in 5.6, from myself.
Patch 6 fixes a double-free bug that was also added via previous PR:
We must not schedule gc work if the previous batch is still queued.
netfilter pull request 2023-08-23
* tag 'nf-23-08-23' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: defer gc run if previous batch is still pending
netfilter: nf_tables: fix out of memory error handling
netfilter: nf_tables: use correct lock to protect gc_list
netfilter: nf_tables: GC transaction race with abort path
netfilter: nf_tables: flush pending destroy work before netlink notifier
netfilter: nf_tables: validate all pending tables
====================
Link: https://lore.kernel.org/r/20230823152711.15279-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Hangbin Liu says:
====================
fix macvlan over alb bond support
Currently, the macvlan over alb bond is broken after commit
14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds").
Fix this and add relate tests.
====================
Link: https://lore.kernel.org/r/20230823071907.3027782-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a macvlan over bonding test with mode active-backup, balance-tlb
and balance-alb.
]# ./bond_macvlan.sh
TEST: active-backup: IPv4: client->server [ OK ]
TEST: active-backup: IPv6: client->server [ OK ]
TEST: active-backup: IPv4: client->macvlan_1 [ OK ]
TEST: active-backup: IPv6: client->macvlan_1 [ OK ]
TEST: active-backup: IPv4: client->macvlan_2 [ OK ]
TEST: active-backup: IPv6: client->macvlan_2 [ OK ]
TEST: active-backup: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv4: server->client [ OK ]
TEST: active-backup: IPv6: server->client [ OK ]
TEST: active-backup: IPv4: macvlan_1->client [ OK ]
TEST: active-backup: IPv6: macvlan_1->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->client [ OK ]
TEST: active-backup: IPv6: macvlan_2->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_2->macvlan_2 [ OK ]
[...]
TEST: balance-alb: IPv4: client->server [ OK ]
TEST: balance-alb: IPv6: client->server [ OK ]
TEST: balance-alb: IPv4: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv4: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: server->client [ OK ]
TEST: balance-alb: IPv6: server->client [ OK ]
TEST: balance-alb: IPv4: macvlan_1->client [ OK ]
TEST: balance-alb: IPv6: macvlan_1->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->client [ OK ]
TEST: balance-alb: IPv6: macvlan_2->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_2->macvlan_2 [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a new testing topo bond_topo_2d1c.sh which is used more commonly.
Make bond_topo_3d1c.sh just source bond_topo_2d1c.sh and add the
extra link.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.
To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.
So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.
Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: susan.zheng@veritas.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Negative ifindexes are illegal, but the kernel does not validate the
ifindex in the ancillary header of RTM_NEWLINK messages, resulting in
the kernel generating a warning [1] when such an ifindex is specified.
Fix by rejecting negative ifindexes.
[1]
WARNING: CPU: 0 PID: 5031 at net/core/dev.c:9593 dev_index_reserve+0x1a2/0x1c0 net/core/dev.c:9593
[...]
Call Trace:
<TASK>
register_netdevice+0x69a/0x1490 net/core/dev.c:10081
br_dev_newlink+0x27/0x110 net/bridge/br_netlink.c:1552
rtnl_newlink_create net/core/rtnetlink.c:3471 [inline]
__rtnl_newlink+0x115e/0x18c0 net/core/rtnetlink.c:3688
rtnl_newlink+0x67/0xa0 net/core/rtnetlink.c:3701
rtnetlink_rcv_msg+0x439/0xd30 net/core/rtnetlink.c:6427
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x536/0x810 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:728 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:751
____sys_sendmsg+0x6ac/0x940 net/socket.c:2538
___sys_sendmsg+0x135/0x1d0 net/socket.c:2592
__sys_sendmsg+0x117/0x1e0 net/socket.c:2621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 38f7b870d4a6 ("[RTNETLINK]: Link creation API")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230823064348.2252280-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/E1qYlA0-006vFr-Ts@formenos.hmeau.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Extracting btf_int_encoding() is only meaningful for BTF_KIND_INT, so we
need to check that first before inferring signedness.
Closes: https://github.com/libbpf/libbpf/issues/704
Reported-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230824000016.2658017-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
It seems like it was forgotten to add uprobe_multi binary to .gitignore.
Fix this trivial omission.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230824000016.2658017-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Daniel Golle says:
====================
net: ethernet: mtk_eth_soc: improve support for MT7988
This series fixes and completes commit 445eb6448ed3b ("net: ethernet:
mtk_eth_soc: add basic support for MT7988 SoC") and also adds support
for using the in-SoC SRAM to previous MT7986 and MT7981 SoCs.
====================
Link: https://lore.kernel.org/r/cover.1692721443.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Systems having 4 GiB of RAM and more require DMA addressing beyond the
current 32-bit limit. Starting from MT7988 the hardware now supports
36-bit DMA addressing, let's use that new capability in the driver to
avoid running into swiotlb on systems with 4 GiB of RAM or more.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/95b919c98876c9e49761e44662e7c937479eecb8.1692721443.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MT7981, MT7986 and MT7988 come with in-SoC SRAM dedicated for Ethernet
DMA rings. Support using the SRAM without breaking existing device tree
bindings, ie. only new SoC starting from MT7988 will have the SRAM
declared as additional resource in device tree. For MT7981 and MT7986
an offset on top of the main I/O base is used.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/e45e0f230c63ad58869e8fe35b95a2fb8925b625.1692721443.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add bits needed to reset the frame engine on MT7988.
Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/89b6c38380e7a3800c1362aa7575600717bc7543.1692721443.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
More register macros need to be adjusted for the 3rd GMAC on MT7988.
Account for added bit in SYSCFG0_SGMII_MASK.
Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1c8da012e2ca80939906d85f314138c552139f0f.1692721443.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As we already added the exception tracing for XDP_TX, I think it is
necessary to add the exception tracing for other XDP actions, such
as XDP_REDIRECT, XDP_ABORTED and unknown error actions.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230822065255.606739-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the standard error pointer macro to shorten the code and simplify.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20230822021455.205101-2-liaoyu15@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For bpf_object__pin_programs() there is bpf_object__unpin_programs().
Likewise bpf_object__unpin_maps() for bpf_object__pin_maps().
But no bpf_object__unpin() for bpf_object__pin(). Adding the former adds
symmetry to the API.
It's also convenient for cleanup in application code. It's an API I
would've used if it was available for a repro I was writing earlier.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/b2f9d41da4a350281a0b53a804d11b68327e14e5.1692832478.git.dxu@dxuuu.xyz
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Make an existing ACPI IRQ override quirk for PCSpecialist Elimina Pro
16 M work as intended (Hans de Goede)"
* tag 'acpi-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Fix IRQ override quirk for PCSpecialist Elimina Pro 16 M
|
|
Yafang Shao says:
====================
bpf: Fix an issue in verifing allow_ptr_leaks
Patch #1: An issue found in our local 6.1 kernel.
This issue also exists in bpf-next.
Patch #2: Selftess for #1
v1->v2:
- Add acked-by from Eduard
- Fix build error reported by Alexei
====================
Link: https://lore.kernel.org/r/20230823020703.3790-1-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
- Without prev commit
$ tools/testing/selftests/bpf/test_progs --name=tc_bpf
#232/1 tc_bpf/tc_bpf_root:OK
test_tc_bpf_non_root:PASS:set_cap_bpf_cap_net_admin 0 nsec
test_tc_bpf_non_root:PASS:disable_cap_sys_admin 0 nsec
0: R1=ctx(off=0,imm=0) R10=fp0
; if ((long)(iph + 1) > (long)skb->data_end)
0: (61) r2 = *(u32 *)(r1 +80) ; R1=ctx(off=0,imm=0) R2_w=pkt_end(off=0,imm=0)
; struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr);
1: (61) r1 = *(u32 *)(r1 +76) ; R1_w=pkt(off=0,r=0,imm=0)
; if ((long)(iph + 1) > (long)skb->data_end)
2: (07) r1 += 34 ; R1_w=pkt(off=34,r=0,imm=0)
3: (b4) w0 = 1 ; R0_w=1
4: (2d) if r1 > r2 goto pc+1
R2 pointer comparison prohibited
processed 5 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
test_tc_bpf_non_root:FAIL:test_tc_bpf__open_and_load unexpected error: -13
#233/2 tc_bpf_non_root:FAIL
- With prev commit
$ tools/testing/selftests/bpf/test_progs --name=tc_bpf
#232/1 tc_bpf/tc_bpf_root:OK
#232/2 tc_bpf/tc_bpf_non_root:OK
#232 tc_bpf:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230823020703.3790-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After we converted the capabilities of our networking-bpf program from
cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program
failed to start. Because it failed the bpf verifier, and the error log
is "R3 pointer comparison prohibited".
A simple reproducer as follows,
SEC("cls-ingress")
int ingress(struct __sk_buff *skb)
{
struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr);
if ((long)(iph + 1) > (long)skb->data_end)
return TC_ACT_STOLEN;
return TC_ACT_OK;
}
Per discussion with Yonghong and Alexei [1], comparison of two packet
pointers is not a pointer leak. This patch fixes it.
Our local kernel is 6.1.y and we expect this fix to be backported to
6.1.y, so stable is CCed.
[1]. https://lore.kernel.org/bpf/CAADnVQ+Nmspr7Si+pxWn8zkE7hX-7s93ugwC+94aXSy4uQ9vBg@mail.gmail.com/
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230823020703.3790-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Final set of three small fixes for 6.5"
* tag 'platform-drivers-x86-v6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/mellanox: Fix mlxbf-tmfifo not handling all virtio CONSOLE notifications
platform/x86: ideapad-laptop: Add support for new hotkeys found on ThinkBook 14s Yoga ITL
platform/x86: lenovo-ymc: Add Lenovo Yoga 7 14ACN6 to ec_trigger_quirk_dmi_table
|
