summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-02ravb: Initialize GbEthernet E-MACBiju Das2-13/+62
Initialize GbEthernet E-MAC found on RZ/G2L SoC. This patch also renames ravb_set_rate to ravb_set_rate_rcar and ravb_rcar_emac_init to ravb_emac_init_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add half_duplex to struct ravb_hw_infoBiju Das2-8/+31
RZ/G2L supports half duplex mode. Add a half_duplex hw feature bit to struct ravb_hw_info for supporting half duplex mode for RZ/G2L. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add magic_pkt to struct ravb_hw_infoBiju Das2-1/+5
E-MAC on R-Car supports magic packet detection, whereas RZ/G2L does not support this feature. Add magic_pkt to struct ravb_hw_info and enable this feature only for R-Car. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add tsrq to struct ravb_hw_infoBiju Das2-2/+8
R-Car AVB-DMAC has 4 Transmit start request queues, whereas RZ/G2L has only 1 Transmit start request queue. Add a tsrq variable to struct ravb_hw_info to handle this difference. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Exclude gPTP feature support for RZ/G2LBiju Das1-36/+49
R-Car supports gPTP feature whereas RZ/G2L does not support it. This patch excludes gtp feature support for RZ/G2L. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Initialize GbEthernet DMACBiju Das2-2/+31
Initialize GbEthernet DMAC found on RZ/G2L SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add support for RZ/G2L SoCBiju Das2-0/+64
RZ/G2L SoC has Gigabit Ethernet IP consisting of Ethernet controller (E-MAC), Internal TCP/IP Offload Engine (TOE) and Dedicated Direct memory access controller (DMAC). This patch adds compatible string for RZ/G2L and fills up the ravb_hw_info struct. Function stubs are added which will be used by gbeth_hw_info and will be filled incrementally. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add nc_queue to struct ravb_hw_infoBiju Das2-49/+94
R-Car supports network control queue whereas RZ/G2L does not support it. Add nc_queue to struct ravb_hw_info, so that NC queue is handled only by R-Car. This patch also renames ravb_rcar_dmac_init to ravb_dmac_init_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Rename "no_ptp_cfg_active" and "ptp_cfg_active" variablesBiju Das2-15/+15
Rename the variable "no_ptp_cfg_active" with "gptp" and "ptp_cfg_active" with "ccc_gac" to match the HW features. There is no functional change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Rename "ravb_set_features_rx_csum" function to "ravb_set_features_rcar"Biju Das2-6/+6
Rename "ravb_set_features_rx_csum" function to "ravb_set_features_rcar" and replace the function pointer "set_rx_csum_feature" with "set_feature". Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski132-1149/+8204
Daniel Borkmann says: ==================== bpf-next 2021-10-02 We've added 85 non-merge commits during the last 15 day(s) which contain a total of 132 files changed, 13779 insertions(+), 6724 deletions(-). The main changes are: 1) Massive update on test_bpf.ko coverage for JITs as preparatory work for an upcoming MIPS eBPF JIT, from Johan Almbladh. 2) Add a batched interface for RX buffer allocation in AF_XDP buffer pool, with driver support for i40e and ice from Magnus Karlsson. 3) Add legacy uprobe support to libbpf to complement recently merged legacy kprobe support, from Andrii Nakryiko. 4) Add bpf_trace_vprintk() as variadic printk helper, from Dave Marchevsky. 5) Support saving the register state in verifier when spilling <8byte bounded scalar to the stack, from Martin Lau. 6) Add libbpf opt-in for stricter BPF program section name handling as part of libbpf 1.0 effort, from Andrii Nakryiko. 7) Add a document to help clarifying BPF licensing, from Alexei Starovoitov. 8) Fix skel_internal.h to propagate errno if the loader indicates an internal error, from Kumar Kartikeya Dwivedi. 9) Fix build warnings with -Wcast-function-type so that the option can later be enabled by default for the kernel, from Kees Cook. 10) Fix libbpf to ignore STT_SECTION symbols in legacy map definitions as it otherwise errors out when encountering them, from Toke Høiland-Jørgensen. 11) Teach libbpf to recognize specialized maps (such as for perf RB) and internally remove BTF type IDs when creating them, from Hengqi Chen. 12) Various fixes and improvements to BPF selftests. ==================== Link: https://lore.kernel.org/r/20211002001327.15169-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-02net/core: disable NET_RX_BUSY_POLL on PREEMPT_RTSebastian Andrzej Siewior1-1/+1
napi_busy_loop() disables preemption and performs a NAPI poll. We can't acquire sleeping locks with disabled preemption which would be required while __napi_poll() invokes the callback of the driver. A threaded interrupt performing the NAPI-poll can be preempted on PREEMPT_RT. A RT thread on another CPU may observe NAPIF_STATE_SCHED bit set and busy-spin until it is cleared or its spin time runs out. Given it is the task with the highest priority it will never observe the NEED_RESCHED bit set. In this case the time is better spent by simply sleeping. The NET_RX_BUSY_POLL is disabled by default (the system wide sysctls for poll/read are set to zero). Disabling NET_RX_BUSY_POLL on PREEMPT_RT to avoid wrong locking context in case it is used. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20211001145841.2308454-1-bigeasy@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-02Merge branch 'libbpf: Support uniform BTF-defined key/value specification ↵Andrii Nakryiko14-40/+62
across all BPF maps' Hengqi Chen says: ==================== Currently a bunch of (usually pretty specialized) BPF maps do not support specifying BTF types for they key and value. For such maps, specifying their definition like this: struct { __uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY); __type(key, int); __type(value, int); } my_perf_buf SEC(".maps"); Would actually produce warnings about retrying BPF map creation without BTF. Users are forced to know such nuances and use __uint(key_size, 4) instead. This is non-uniform, annoying, and inconvenient. This patch set teaches libbpf to recognize those specialized maps and removes BTF type IDs when creating BPF map. Also, update existing BPF selftests to exericse this change. ==================== Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2021-10-02selftests/bpf: Use BTF-defined key/value for map definitionsHengqi Chen13-40/+38
Change map definitions in BPF selftests to use BTF-defined key/value types. This unifies the map definitions and ensures libbpf won't emit warning about retrying map creation. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210930161456.3444544-3-hengqi.chen@gmail.com
2021-10-02libbpf: Support uniform BTF-defined key/value specification across all BPF mapsHengqi Chen1-0/+24
A bunch of BPF maps do not support specifying BTF types for key and value. This is non-uniform and inconvenient[0]. Currently, libbpf uses a retry logic which removes BTF type IDs when BPF map creation failed. Instead of retrying, this commit recognizes those specialized maps and removes BTF type IDs when creating BPF map. [0] Closes: https://github.com/libbpf/libbpf/issues/355 Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210930161456.3444544-2-hengqi.chen@gmail.com
2021-10-02Merge tag 'mlx5-updates-2021-09-30' of ↵Jakub Kicinski16-146/+215
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-09-30 1) From Yevgeny Kliteynik: This patch series deals with vport handling in SW steering. For every vport, SW steering queries FW for this vport's properties, such as RX/TX ICM addresses to be able to add this vport as dest action. The following patches rework vport capabilities managements and add support for Scalable Functions (SFs). - Patch 1 fixes the vport number data type all over the DR code to 16 bits in accordance with HW spec. - Patch 2 replaces local SW steering WIRE_PORT macro with the existing mlx5 define. - Patch 3 adds missing query for vport 0 and and handles eswitch manager capabilities for ECPF (BlueField in embedded CPU mode). - Patch 4 fixes error messages for failure to obtain vport caps from different locations in the code to have the same verbosity level and similar wording. - Patch 5 adds support for csum recalculation flow tables on SFs: it implements these FTs management in XArray instead of the fixed size array, thus adding support for csum recalculation table for any valid vport. - Patch 6 is the main patch of this whole series: it refactors vports capabilities handling and adds SFs support. 2) Minor and trivial updates and cleanups * tag 'mlx5-updates-2021-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Use array_size() helper net/mlx5: Use struct_size() helper in kvzalloc() net/mlx5: Use kvcalloc() instead of kvzalloc() net/mlx5: Tolerate failures in debug features while driver load net/mlx5: Warn for devlink reload when there are VFs alive net/mlx5: DR, Add missing string for action type SAMPLER net/mlx5: DR, init_next_match only if needed net/mlx5: DR, Fix typo 'offeset' to 'offset' net/mlx5: DR, Increase supported num of actions to 32 net/mlx5: DR, Add support for SF vports net/mlx5: DR, Support csum recalculation flow table on SFs net/mlx5: DR, Align error messages for failure to obtain vport caps net/mlx5: DR, Add missing query for vport 0 net/mlx5: DR, Replace local WIRE_PORT macro with the existing MLX5_VPORT_UPLINK net/mlx5: DR, Fix vport number data type to u16 ==================== Link: https://lore.kernel.org/r/20210930232050.41779-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-01bpf/tests: Add test of LDX_MEM with operand aliasingJohan Almbladh1-0/+58
This patch adds a set of tests of BPF_LDX_MEM where both operand registers are the same register. Mainly testing 32-bit JITs that may load a 64-bit value in two 32-bit loads, and must not overwrite the address register. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-11-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add test of ALU shifts with operand register aliasingJohan Almbladh1-13/+149
This patch adds a tests of ALU32 and ALU64 LSH/RSH/ARSH operations for the case when the two operands are the same register. Mainly intended to test JITs that implement ALU64 shifts with 32-bit CPU instructions. Also renamed related helper functions for consistency with the new tests. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-10-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add exhaustive tests of BPF_ATOMIC register combinationsJohan Almbladh1-0/+422
This patch adds tests of all register combinations for BPF_ATOMIC operations on both BPF_W and BPF_DW sizes. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-9-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add exhaustive tests of ALU register combinationsJohan Almbladh1-71/+763
This patch replaces the current register combination test with new exhaustive tests. Before, only a subset of register combinations was tested for ALU64 DIV. Now, all combinatons of operand registers are tested, including the case when they are the same, and for all ALU32 and ALU64 operations. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-8-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Minor restructuring of ALU testsJohan Almbladh1-72/+65
This patch moves the ALU LSH/RSH/ARSH reference computations into the common reference value function. Also fix typo in constants so they now have the intended values. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-7-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add more tests for ALU and ATOMIC register clobberingJohan Almbladh1-70/+197
This patch expands the register-clobbering-during-function-call tests to cover more all ALU32/64 MUL, DIV and MOD operations and all ATOMIC operations. In short, if a JIT implements a complex operation with a call to an external function, it must make sure to save and restore all its caller-saved registers that may be clobbered by the call. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-6-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add tests to check source register zero-extensionJohan Almbladh1-0/+143
This patch adds tests to check that the source register is preserved when zero-extending a 32-bit value. In particular, it checks that the source operand is not zero-extended in-place. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-5-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add exhaustive tests of BPF_ATOMIC magnitudesJohan Almbladh1-1/+503
This patch adds a series of test to verify the operation of BPF_ATOMIC with BPF_DW and BPF_W sizes, for all power-of-two magnitudes of the register value operand. Also fixes a confusing typo in the comment for a related test. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-4-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add zero-extension checks in BPF_ATOMIC testsJohan Almbladh1-5/+17
This patch updates the existing tests of BPF_ATOMIC operations to verify that a 32-bit register operand is properly zero-extended. In particular, it checks the operation on archs that require 32-bit operands to be properly zero-/sign-extended or the result is undefined, e.g. MIPS64. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-3-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add tests of BPF_LDX and BPF_STX with small sizesJohan Almbladh1-0/+254
This patch adds a series of tests to verify the behavior of BPF_LDX and BPF_STX with BPF_B//W sizes in isolation. In particular, it checks that BPF_LDX zero-extendeds the result, and that BPF_STX does not overwrite adjacent bytes in memory. BPF_ST and operations on BPF_DW size are deemed to be sufficiently tested by existing tests. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-2-johan.almbladh@anyfinetworks.com
2021-10-01fix up for "net: add new socket option SO_RESERVE_MEM"Stephen Rothwell3-0/+6
Some architectures do not include uapi/asm/socket.h Fixes: 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01Revert "Merge branch 'mctp-kunit-tests'"David S. Miller6-632/+0
This reverts commit 4f42ad2011d2fcbd89f5cdf56121271a8cd5ee5d, reversing changes made to ea2dd331bfaaeba74ba31facf437c29044f7d4cb. These chanfges break the build when mctp is modular. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01sparc: add SO_RESERVE_MEM definition.David S. Miller1-0/+3
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01devlink: report maximum number of snapshots with regionsJacob Keller4-2/+13
Each region has an independently configurable number of maximum snapshots. This information is not reported to userspace, making it not very discoverable. Fix this by adding a new DEVLINK_ATTR_REGION_MAX_SNAPSHOST attribute which is used to report this maximum. Ex: $devlink region pci/0000:af:00.0/nvm-flash: size 10485760 snapshot [] max 1 pci/0000:af:00.0/device-caps: size 4096 snapshot [] max 10 pci/0000:af:00.1/nvm-flash: size 10485760 snapshot [] max 1 pci/0000:af:00.1/device-caps: size 4096 snapshot [] max 10 This information enables users to understand why a new region command may fail due to having too many existing snapshots. Reported-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01Merge branch 'mctp-kunit-tests'David S. Miller6-0/+632
Jeremy Kerr says: ==================== MCTP kunit tests This change adds some initial kunit tests for the MCTP core. We'll expand the coverage in a future series, and augment with a few selftests, but this establishes a baseline set of tests for now. Thanks to the kunit folks for the framework! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01mctp: Add input reassembly testsJeremy Kerr1-0/+134
Add multi-packet route input tests, for message reassembly. These will feed packets to be received by a bound socket, or dropped. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01mctp: Add route input to socket testsJeremy Kerr1-0/+131
Add a few tests for single-packet route inputs, testing the mctp_route_input function. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01mctp: Add packet rx testsJeremy Kerr1-3/+64
Add a few tests for the initial packet ingress through mctp_pkttype_receive function; mainly packet header sanity checks. Full input routing checks will be added as a separate change. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01mctp: Add test utilsJeremy Kerr3-0/+90
Add a new object for shared test utilities Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01mctp: Add initial test structure and fragmentation testJeremy Kerr3-0/+216
This change adds the first kunit test for the mctp subsystem, and an initial test for the fragmentation path. We're adding tests under a new net/mctp/test/ directory. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01Merge tag 'mlx5-fixes-2021-09-30' of ↵David S. Miller14-105/+194
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-09-30 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01net: sched: Use struct_size() helper in kvmalloc()Gustavo A. R. Silva1-1/+1
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Link: https://github.com/KSPP/linux/issues/160 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20210929201718.GA342296@embeddedor Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-01net/mlx5e: Use array_size() helperGustavo A. R. Silva1-4/+6
Use array_size() helper to aid in 2-factor allocation instances. Link: https://github.com/KSPP/linux/issues/160 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-01net/mlx5: Use struct_size() helper in kvzalloc()Gustavo A. R. Silva1-2/+1
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worse scenario, could lead to heap overflows. Link: https://github.com/KSPP/linux/issues/160 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-01net/mlx5: Use kvcalloc() instead of kvzalloc()Gustavo A. R. Silva2-3/+3
Use 2-factor argument form kvcalloc() instead of kvzalloc(). Link: https://github.com/KSPP/linux/issues/162 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-01net/mlx5: Tolerate failures in debug features while driver loadAya Levin1-6/+6
FW tracer and resource dump are debug features. Although failing to initialize them may indicate an error, don't let this stop device loading. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-01net/mlx5: Warn for devlink reload when there are VFs aliveLama Kayal1-0/+5
When performing PF reload, VF can't communicate with FW until it recovers and reloads as well. Add a warning message when performing devlink reload while VFs are still present. Thus, giving a notice of an unfavorable behavior that might occur as a result of a consequential reloads and cause interruption of VF recovery. Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-01net/mlx5: DR, Add missing string for action type SAMPLERYevgeny Kliteynik1-0/+1
Add missing string value for DR_ACTION_TYP_SAMPLER action type Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-01net/mlx5: DR, init_next_match only if neededYevgeny Kliteynik1-3/+5
Allocate next steering table entry only if the remaining space requires to. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-01net/mlx5: DR, Fix typo 'offeset' to 'offset'Yevgeny Kliteynik2-2/+2
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-01net/mlx5: DR, Increase supported num of actions to 32Yevgeny Kliteynik1-1/+1
Increase max supported number of actions in the same rule. Signed-off-by: Hamdan Igbaria <hamdani@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-01net/mlx5: DR, Add support for SF vportsYevgeny Kliteynik5-68/+120
Move all the vport capabilities to a separate struct and store vport caps in XArray: SFs vport numbers will not come in the same range as VF vports, so the existing implementation of vport capabilities as a fixed size array is not suitable here. XArray is a perfect fit: it is efficient when the indices used are densely clustered. In addition to being a perfect fit as a dynamic data structure, XArray also provides locking - it uses RCU and an internal spinlock to synchronise access, so no additional protection needed. Now except for the eswitch manager vport, all other vports (including the uplink vport) are handled in the same way: when a new go-to-vport action is added, this vport's caps are loaded from the xarray. If it is the first time for this particular vport number, then its capabilities are queried from FW and filled in into the appropriate entry. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-01net/mlx5: DR, Support csum recalculation flow table on SFsYevgeny Kliteynik3-42/+29
Implement csum recalculation flow tables in XAarray instead of a fixed array, thus adding support for csum recalc table on any valid vport number, which enables this support for SFs. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-01net/mlx5: DR, Align error messages for failure to obtain vport capsYevgeny Kliteynik2-2/+4
Print similar error messages when an invalid vport number is provided during action creation and during STEv0/1 creation. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 02:22:34 +0300