| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Enabling KVM now causes a build failure on x86-32 if X86_LOCAL_APIC
is disabled:
arch/x86/kvm/svm/svm.c: In function 'svm_emergency_disable_virtualization_cpu':
arch/x86/kvm/svm/svm.c:597:9: error: 'kvm_rebooting' undeclared (first use in this function); did you mean 'kvm_irq_routing'?
597 | kvm_rebooting = true;
| ^~~~~~~~~~~~~
| kvm_irq_routing
arch/x86/kvm/svm/svm.c:597:9: note: each undeclared identifier is reported only once for each function it appears in
make[6]: *** [scripts/Makefile.build:221: arch/x86/kvm/svm/svm.o] Error 1
In file included from include/linux/rculist.h:11,
from include/linux/hashtable.h:14,
from arch/x86/kvm/svm/avic.c:18:
arch/x86/kvm/svm/avic.c: In function 'avic_pi_update_irte':
arch/x86/kvm/svm/avic.c:909:38: error: 'struct kvm' has no member named 'irq_routing'
909 | irq_rt = srcu_dereference(kvm->irq_routing, &kvm->irq_srcu);
| ^~
include/linux/rcupdate.h:538:17: note: in definition of macro '__rcu_dereference_check'
538 | typeof(*p) *local = (typeof(*p) *__force)READ_ONCE(p); \
Move the dependency to the same place as before.
Fixes: ea4290d77bda ("KVM: x86: leave kvm.ko out of the build if no vendor module is requested")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410060426.e9Xsnkvi-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sean Christopherson <seanjc@google.com>
[sean: add Cc to stable, tweak shortlog scope]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241118172002.1633824-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
setup_vmcs_config()"
Revert back to clearing VM_{ENTRY,EXIT}_LOAD_IA32_PERF_GLOBAL_CTRL in KVM's
golden VMCS config, as applying the workaround during vCPU creation is
pointless and broken. KVM *unconditionally* clears the controls in the
values returned by vmx_vmentry_ctrl() and vmx_vmexit_ctrl(), as KVM loads
PERF_GLOBAL_CTRL if and only if its necessary to do so. E.g. if KVM wants
to run the guest with the same PERF_GLOBAL_CTRL as the host, then there's
no need to re-load the MSR on entry and exit.
Even worse, the buggy commit failed to apply the erratum where it's
actually needed, add_atomic_switch_msr(). As a result, KVM completely
ignores the erratum for all intents and purposes, i.e. uses the flawed
VMCS controls to load PERF_GLOBAL_CTRL.
To top things off, the patch was intended to be dropped, as the premise
of an L1 VMM being able to pivot on FMS is flawed, and KVM can (and now
does) fully emulate the controls in software. Simply revert the commit,
as all upstream supported kernels that have the buggy commit should also
have commit f4c93d1a0e71 ("KVM: nVMX: Always emulate PERF_GLOBAL_CTRL
VM-Entry/VM-Exit controls"), i.e. the (likely theoretical) live migration
concern is a complete non-issue.
Opportunistically drop the manual "kvm: " scope from the warning about
the erratum, as KVM now uses pr_fmt() to provide the correct scope (v6.1
kernels and earlier don't, but the erratum only applies to CPUs that are
15+ years old; it's not worth a separate patch).
This reverts commit 9d78d6fb186bc4aff41b5d6c4726b76649d3cb53.
Link: https://lore.kernel.org/all/YtnZmCutdd5tpUmz@google.com
Fixes: 9d78d6fb186b ("KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()")
Cc: stable@vger.kernel.org
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-ID: <20241119011433.1797921-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_vm_create_worker_thread() is meant to be used for kthreads that
can consume significant amounts of CPU time on behalf of a VM or in
response to how the VM behaves (for example how it accesses its memory).
Therefore it wants to charge the CPU time consumed by that work to
the VM's container.
However, because of these threads, cgroups which have kvm instances
inside never complete freezing. This can be trivially reproduced:
root@test ~# mkdir /sys/fs/cgroup/test
root@test ~# echo $$ > /sys/fs/cgroup/test/cgroup.procs
root@test ~# qemu-system-x86_64 -nographic -enable-kvm
and in another terminal:
root@test ~# echo 1 > /sys/fs/cgroup/test/cgroup.freeze
root@test ~# cat /sys/fs/cgroup/test/cgroup.events
populated 1
frozen 0
The cgroup freezing happens in the signal delivery path but
kvm_nx_huge_page_recovery_worker, while joining non-root cgroups, never
calls into the signal delivery path and thus never gets frozen. Because
the cgroup freezer determines whether a given cgroup is frozen by
comparing the number of frozen threads to the total number of threads
in the cgroup, the cgroup never becomes frozen and users waiting for
the state transition may hang indefinitely.
Since the worker kthread is tied to a user process, it's better if
it behaves similarly to user tasks as much as possible, including
being able to send SIGSTOP and SIGCONT. In fact, vhost_task is all
that kvm_vm_create_worker_thread() wanted to be and more: not only it
inherits the userspace process's cgroups, it has other niceties like
being parented properly in the process tree. Use it instead of the
homegrown alternative.
Incidentally, the new code is also better behaved when you flip recovery
back and forth to disabled and back to enabled. If your recovery period
is 1 minute, it will run the next recovery after 1 minute independent
of how many times you flipped the parameter.
(Commit message based on emails from Tejun).
Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Luca Boccassi <bluca@debian.org>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Luca Boccassi <bluca@debian.org>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.13
1. Add iocsr and mmio bus simulation in kernel.
2. Add in-kernel interrupt controller emulation.
3. Add virt extension support for eiointc irqchip.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.13, part #1
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call
was introduced in PSCIv1.3 as a mechanism to request hibernation,
similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested synchronous
external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
|
|
For userspace that wants to disable KVM_X86_QUIRK_STUFF_FEATURE_MSRS, it
is useful to know what bits can be set to 1 in MSR_PLATFORM_INFO (apart
from the TSC ratio). The right way to do that is via /dev/kvm's
feature MSR mechanism.
In fact, MSR_PLATFORM_INFO is already a feature MSR for the purpose of
blocking updates after the vCPU is run, but KVM_GET_MSRS did not return
a valid value for it.
Just like in a VM that leaves KVM_X86_QUIRK_STUFF_FEATURE_MSRS enabled,
the TSC ratio field is left to 0. Only bit 31 is set.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Latest Intel platform Clearwater Forest has introduced new instructions
enumerated by CPUIDs of SHA512, SM3, SM4 and AVX-VNNI-INT16. Advertise
these CPUIDs to userspace so that guests can query them directly.
SHA512, SM3 and SM4 are on an expected-dense CPUID leaf and some other
bits on this leaf have kernel usages. Considering they have not truly
kernel usages, hide them in /proc/cpuinfo.
These new instructions only operate in xmm, ymm registers and have no new
VMX controls, so there is no additional host enabling required for guests
to use these instructions, i.e. advertising these CPUIDs to userspace is
safe.
Tested-by: Jiaan Lu <jiaan.lu@intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20241105054825.870939-1-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 5f6a3badbb74 ("KVM: x86/mmu: Mark page/folio accessed only when zapping leaf SPTEs")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Drop obsolete references to PPC970 KVM, which was removed 10 years ago.
- Fix incorrect references to non-existing ioctls
- List registers supported by KVM_GET/SET_ONE_REG on s390
- Use rST internal links
- Reorganize the introduction to the API document
|
|
KVM x86 misc changes for 6.13
- Clean up and optimize KVM's handling of writes to MSR_IA32_APICBASE.
- Quirk KVM's misguided behavior of initialized certain feature MSRs to
their maximum supported feature set, which can result in KVM creating
invalid vCPU state. E.g. initializing PERF_CAPABILITIES to a non-zero
value results in the vCPU having invalid state if userspace hides PDCM
from the guest, which can lead to save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support LA57
to better follow the "architecture", in quotes because the actual
behavior is poorly documented. E.g. most MSR writes and descriptor
table loads ignore CR4.LA57 and operate purely on whether the CPU
supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(), as
filling the cache from IRQ context is generally unsafe, and harden the
cache accessors to try to prevent similar issues from occuring in the
future.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where KVM
over-advertises SPEC_CTRL when trying to support cross-vendor VMs.
- Minor cleanups
|
|
KVM VMX change for 6.13
- Remove __invept()'s unused @gpa param, which was left behind when KVM
dropped code for invalidating a specific GPA (Intel never officially
documented support for single-address INVEPT; presumably pre-production
CPUs supported it at some point).
|
|
KVM selftests changes for 6.13
- Enable XFAM-based features by default for all selftests VMs, which will
allow removing the "no AVX" restriction.
|
|
KVM x86 MMU changes for 6.13
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve
documentation, harden against unexpected changes, and to simplify
A/D-disabled MMUs by using the hardware-defined A/D bits to track if a
PFN is Accessed and/or Dirty.
- Elide TLB flushes when aging SPTEs, as has been done in x86's primary
MMU for over 10 years.
- Batch TLB flushes when zapping collapsible TDP MMU SPTEs, i.e. when
dirty logging is toggled off, which reduces the time it takes to disable
dirty logging by ~3x.
- Recover huge pages in-place in the TDP MMU instead of zapping the SP
and waiting until the page is re-accessed to create a huge mapping.
Proactively installing huge pages can reduce vCPU jitter in extreme
scenarios.
- Remove support for (poorly) reclaiming page tables in shadow MMUs via
the primary MMU's shrinker interface.
|
|
KVM generic changes for 6.13
- Rework kvm_vcpu_on_spin() to use a single for-loop instead of making two
partial poasses over "all" vCPUs. Opportunistically expand the comment
to better explain the motivation and logic.
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead
of RCU, so that running a vCPU on a different task doesn't encounter
long stalls due to having to wait for all CPUs become quiescent.
|
|
Interrupts can be routed to maximal four virtual CPUs with real HW
EIOINTC interrupt controller model, since interrupt routing is encoded
with CPU bitmap and EIOINTC node combined method. Here add the EIOINTC
virt extension support so that interrupts can be routed to 256 vCPUs in
virtual machine mode. CPU bitmap is replaced with normal encoding and
EIOINTC node type is removed, so there are 8 bits for cpu selection, at
most 256 vCPUs are supported for interrupt routing.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Enable the KVM_IRQ_ROUTING/KVM_IRQCHIP/KVM_MSI configuration items,
add the KVM_CAP_IRQCHIP capability, and implement the query interface
of the in-kernel irqchip.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Implement the communication interface between the user mode programs
and the kernel in PCHPIC interrupt control simulation, which is used
to obtain or send the simulation data of the interrupt controller in
the user mode process, and is also used in VM migration or VM saving
and restoration.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add implementation of IPI interrupt controller's address space read and
write function simulation.
Implement interrupt injection interface under loongarch.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add device model for PCHPIC interrupt controller, implemente basic
create & destroy interface, and register device model to kvm device
table.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Implement the communication interface between the user mode programs
and the kernel in EIOINTC interrupt controller simulation, which is
used to obtain or send the simulation data of the interrupt controller
in the user mode process, and is also used in VM migration or VM saving
and restoration.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add implementation of EIOINTC interrupt controller's address space read
and write function simulation.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add device model for EIOINTC interrupt controller, implement basic
create & destroy interfaces, and register device model to kvm device
table.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Implement the communication interface between the user mode programs
and the kernel in IPI interrupt controller simulation, which is used
to obtain or send the simulation data of the interrupt controller in
the user mode process, and is also used in VM migration or VM saving
and restoration.
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add implementation of IPI interrupt controller's address space read and
write function simulation.
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add device model for IPI interrupt controller, implement basic create &
destroy interfaces, and register device model to kvm device table.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add iocsr and mmio memory read and write simulation to the kernel. When
the VM accesses the device address space through iocsr instructions or
mmio, it does not need to return to the qemu user mode but can directly
completes the access in the kernel mode.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This function can fail but its return value isn't passed onto the
caller. Presumably this could result in a broken state.
Fixes: 66d5b53e20a6 ("KVM: arm64: Allocate memory mapped at hyp for host sve state in pKVM")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241112105604.795809-1-james.clark@linaro.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- second part of the ucontrol selftest
- cpumodel sanity check selftest
- gen17 cpumodel changes
|
|
* kvm-arm64/vgic-its-fixes:
: Fixes for vgic-its save/restore, courtesy of Kunkun Jiang and Jing Zhang
:
: Address bugs where restoring an ITS consumes a stale DTE/ITE, which
: may lead to either garbage mappings in the ITS or the overall restore
: ioctl failing. The fix in both cases is to zero a DTE/ITE when its
: translation has been invalidated by the guest.
KVM: arm64: vgic-its: Clear ITE when DISCARD frees an ITE
KVM: arm64: vgic-its: Clear DTE when MAPD unmaps a device
KVM: arm64: vgic-its: Add a data length check in vgic_its_save_*
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When DISCARD frees an ITE, it does not invalidate the
corresponding ITE. In the scenario of continuous saves and
restores, there may be a situation where an ITE is not saved
but is restored. This is unreasonable and may cause restore
to fail. This patch clears the corresponding ITE when DISCARD
frees an ITE.
Cc: stable@vger.kernel.org
Fixes: eff484e0298d ("KVM: arm64: vgic-its: ITT save and restore")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
[Jing: Update with entry write helper]
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20241107214137.428439-6-jingzhangos@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
vgic_its_save_device_tables will traverse its->device_list to
save DTE for each device. vgic_its_restore_device_tables will
traverse each entry of device table and check if it is valid.
Restore if valid.
But when MAPD unmaps a device, it does not invalidate the
corresponding DTE. In the scenario of continuous saves
and restores, there may be a situation where a device's DTE
is not saved but is restored. This is unreasonable and may
cause restore to fail. This patch clears the corresponding
DTE when MAPD unmaps a device.
Cc: stable@vger.kernel.org
Fixes: 57a9a117154c ("KVM: arm64: vgic-its: Device table save/restore")
Co-developed-by: Shusen Li <lishusen2@huawei.com>
Signed-off-by: Shusen Li <lishusen2@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
[Jing: Update with entry write helper]
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20241107214137.428439-5-jingzhangos@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In all the vgic_its_save_*() functinos, they do not check whether
the data length is 8 bytes before calling vgic_write_guest_lock.
This patch adds the check. To prevent the kernel from being blown up
when the fault occurs, KVM_BUG_ON() is used. And the other BUG_ON()s
are replaced together.
Cc: stable@vger.kernel.org
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
[Jing: Update with the new entry read/write helpers]
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20241107214137.428439-4-jingzhangos@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/nv-pmu:
: Support for vEL2 PMU controls
:
: Align the vEL2 PMU support with the current state of non-nested KVM,
: including:
:
: - Trap routing, with the annoying complication of EL2 traps that apply
: in Host EL0
:
: - PMU emulation, using the correct configuration bits depending on
: whether a counter falls in the hypervisor or guest range of PMCs
:
: - Perf event swizzling across nested boundaries, as the event filtering
: needs to be remapped to cope with vEL2
KVM: arm64: nv: Reprogram PMU events affected by nested transition
KVM: arm64: nv: Apply EL2 event filtering when in hyp context
KVM: arm64: nv: Honor MDCR_EL2.HLP
KVM: arm64: nv: Honor MDCR_EL2.HPME
KVM: arm64: Add helpers to determine if PMC counts at a given EL
KVM: arm64: nv: Adjust range of accessible PMCs according to HPMN
KVM: arm64: Rename kvm_pmu_valid_counter_mask()
KVM: arm64: nv: Advertise support for FEAT_HPMN0
KVM: arm64: nv: Describe trap behaviour of MDCR_EL2.HPMN
KVM: arm64: nv: Honor MDCR_EL2.{TPM, TPMCR} in Host EL0
KVM: arm64: nv: Reinject traps that take effect in Host EL0
KVM: arm64: nv: Rename BEHAVE_FORWARD_ANY
KVM: arm64: nv: Allow coarse-grained trap combos to use complex traps
KVM: arm64: Describe RES0/RES1 bits of MDCR_EL2
arm64: sysreg: Add new definitions for ID_AA64DFR0_EL1
arm64: sysreg: Migrate MDCR_EL2 definition to table
arm64: sysreg: Describe ID_AA64DFR2_EL1 fields
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/mmio-sea:
: Fix for SEA injection in response to MMIO
:
: Fix + test coverage for SEA injection in response to an unhandled MMIO
: exit to userspace. Naturally, if userspace decides to abort an MMIO
: instruction KVM shouldn't continue with instruction emulation...
KVM: arm64: selftests: Add tests for MMIO external abort injection
KVM: arm64: selftests: Convert to kernel's ESR terminology
tools: arm64: Grab a copy of esr.h from kernel
KVM: arm64: Don't retire aborted MMIO instruction
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Drop useless check against vgic state in ICC_CLTR_EL1.SEIS read
: emulation
:
: - Fix trap configuration for pKVM
:
: - Close the door on initialization bugs surrounding userspace irqchip
: static key by removing it.
KVM: selftests: Don't bother deleting memslots in KVM when freeing VMs
KVM: arm64: Get rid of userspace_irqchip_in_use
KVM: arm64: Initialize trap register values in hyp in pKVM
KVM: arm64: Initialize the hypervisor's VM state at EL2
KVM: arm64: Refactor kvm_vcpu_enable_ptrauth() for hyp use
KVM: arm64: Move pkvm_vcpu_init_traps() to init_pkvm_hyp_vcpu()
KVM: arm64: Don't map 'kvm_vgic_global_state' at EL2 with pKVM
KVM: arm64: Just advertise SEIS as 0 when emulating ICC_CTLR_EL1
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When freeing a VM, don't call into KVM to manually remove each memslot,
simply cleanup and free any userspace assets associated with the memory
region. KVM is ultimately responsible for ensuring kernel resources are
freed when the VM is destroyed, deleting memslots one-by-one is
unnecessarily slow, and unless a test is already leaking the VM fd, the
VM will be destroyed when kvm_vm_release() is called.
Not deleting KVM's memslot also allows cleaning up dead VMs without having
to care whether or not the to-be-freed VM is dead or alive.
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvmarm/Zy0bcM0m-N18gAZz@google.com/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/mpam-ni:
: Hiding FEAT_MPAM from KVM guests, courtesy of James Morse + Joey Gouly
:
: Fix a longstanding bug where FEAT_MPAM was accidentally exposed to KVM
: guests + the EL2 trap configuration was not explicitly configured. As
: part of this, bring in skeletal support for initialising the MPAM CPU
: context so KVM can actually set traps for its guests.
:
: Be warned -- if this series leads to boot failures on your system,
: you're running on turd firmware.
:
: As an added bonus (that builds upon the infrastructure added by the MPAM
: series), allow userspace to configure CTR_EL0.L1Ip, courtesy of Shameer
: Kolothum.
KVM: arm64: Make L1Ip feature in CTR_EL0 writable from userspace
KVM: arm64: selftests: Test ID_AA64PFR0.MPAM isn't completely ignored
KVM: arm64: Disable MPAM visibility by default and ignore VMM writes
KVM: arm64: Add a macro for creating filtered sys_reg_descs entries
KVM: arm64: Fix missing traps of guest accesses to the MPAM registers
arm64: cpufeature: discover CPU support for MPAM
arm64: head.S: Initialise MPAM EL2 registers and disable traps
arm64/sysreg: Convert existing MPAM sysregs and add the remaining entries
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/psci-1.3:
: PSCI v1.3 support, courtesy of David Woodhouse
:
: Bump KVM's PSCI implementation up to v1.3, with the added bonus of
: implementing the SYSTEM_OFF2 call. Like other system-scoped PSCI calls,
: this gets relayed to userspace for further processing with a new
: KVM_SYSTEM_EVENT_SHUTDOWN flag.
:
: As an added bonus, implement client-side support for hibernation with
: the SYSTEM_OFF2 call.
arm64: Use SYSTEM_OFF2 PSCI call to power off for hibernate
KVM: arm64: nvhe: Pass through PSCI v1.3 SYSTEM_OFF2 call
KVM: selftests: Add test for PSCI SYSTEM_OFF2
KVM: arm64: Add support for PSCI v1.2 and v1.3
KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation
firmware/psci: Add definitions for PSCI v1.3 specification
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/nv-s1pie-s1poe: (36 commits)
: NV support for S1PIE/S1POE, courtesy of Marc Zyngier
:
: Complete support for S1PIE/S1POE at vEL2, including:
:
: - Save/restore of the vEL2 sysreg context
:
: - Use the S1PIE/S1POE context for fast-path AT emulation
:
: - Enlightening the software walker to the behavior of S1PIE/S1POE
:
: - Like any other good NV series, some trap routing descriptions
KVM: arm64: Handle WXN attribute
KVM: arm64: Handle stage-1 permission overlays
KVM: arm64: Make PAN conditions part of the S1 walk context
KVM: arm64: Disable hierarchical permissions when POE is enabled
KVM: arm64: Add POE save/restore for AT emulation fast-path
KVM: arm64: Add save/restore support for POR_EL2
KVM: arm64: Add basic support for POR_EL2
KVM: arm64: Add kvm_has_s1poe() helper
KVM: arm64: Subject S1PIE/S1POE registers to HCR_EL2.{TVM,TRVM}
KVM: arm64: Drop bogus CPTR_EL2.E0POE trap routing
arm64: Add encoding for POR_EL2
KVM: arm64: Rely on visibility to let PIR*_ELx/TCR2_ELx UNDEF
KVM: arm64: Hide S1PIE registers from userspace when disabled for guests
KVM: arm64: Hide TCR2_EL1 from userspace when disabled for guests
KVM: arm64: Define helper for EL2 registers with custom visibility
KVM: arm64: Add a composite EL2 visibility helper
KVM: arm64: Implement AT S1PIE support
KVM: arm64: Disable hierarchical permissions when S1PIE is enabled
KVM: arm64: Split S1 permission evaluation into direct and hierarchical parts
KVM: arm64: Add AT fast-path support for S1PIE
...
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Only allow userspace to set VIPT(0b10) or PIPT(0b11) for L1Ip based on
what hardware reports as both AIVIVT (0b01) and VPIPT (0b00) are
documented as reserved.
Using a VIPT for Guest where hardware reports PIPT may lead to over
invalidation, but is still correct. Hence, we can allow downgrading
PIPT to VIPT, but not the other way around.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20241022073943.35764-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Check if the PFCR query reported in userspace coincides with the
kernel reported function list. Right now we don't mask the functions
in the kernel so they have to be the same.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-5-brueckner@linux.ibm.com
[frankja@linux.ibm.com: Added commit description]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-5-brueckner@linux.ibm.com>
|
|
Add gen17 facilities and let KVM_CAP_S390_VECTOR_REGISTERS handle
the enablement of the vector extension facilities.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-4-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-4-brueckner@linux.ibm.com>
|
|
Message-security-assist 11 introduces pckmo subfunctions to encrypt
hmac keys.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-3-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-3-brueckner@linux.ibm.com>
|
|
Adding support for concurrent-functions facility which provides
additional subfunctions.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-2-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-2-brueckner@linux.ibm.com>
|
|
The length of the interrupt parameters (IP) are:
a: 2 bytes
b: 4 bytes
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-6-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-6-schlameuss@linux.ibm.com>
|
|
Checkpatch thinks that we're doing a multiplication but we're obviously
not. Fix 4 instances where we adhered to wrong checkpatch advice.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-5-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-5-schlameuss@linux.ibm.com>
|
|
Add a test case verifying KVM_SET_USER_MEMORY_REGION and
KVM_SET_USER_MEMORY_REGION2 cannot be executed on ucontrol VMs.
Executing this test case on not patched kernels will cause a null
pointer dereference in the host kernel.
This is fixed with commit:
commit 7816e58967d0 ("kvm: s390: Reject memory region operations for ucontrol VMs")
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-4-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-4-schlameuss@linux.ibm.com>
|
|
Add a test case manipulating s390 storage keys from within the ucontrol
VM.
Storage key instruction (ISKE, SSKE and RRBE) intercepts and
Keyless-subset facility are disabled on first use, where the skeys are
setup by KVM in non ucontrol VMs.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20241108091620.289406-1-schlameuss@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241108091620.289406-1-schlameuss@linux.ibm.com>
|
|
Add a test case verifying basic running and interaction of ucontrol VMs.
Fill the segment and page tables for allocated memory and map memory on
first access.
* uc_map_unmap
Store and load data to mapped and unmapped memory and use pic segment
translation handling to map memory on access.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link:
https://lore.kernel.org/r/20241107141024.238916-2-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-2-schlameuss@linux.ibm.com>
|
|
|
