summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-09-29net: hns3: fix show wrong state when add existing uc mac addressJian Shen1-10/+9
Currently, if function adds an existing unicast mac address, eventhough driver will not add this address into hardware, but it will return 0 in function hclge_add_uc_addr_common(). It will cause the state of this unicast mac address is ACTIVE in driver, but it should be in TO-ADD state. To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST if mac address is existing, and delete two error log to avoid printing them all the time after this modification. Fixes: 72110b567479 ("net: hns3: return 0 and print warning when hit duplicate MAC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLEJian Shen2-28/+10
HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is supposed to set when enable multiple TCs with ets. But the driver mixed the flags when updating the tm configuration. Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE too, so remove the unnecessary limitation. Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: don't rollback when destroy mqprio failJian Shen1-6/+11
For destroy mqprio is irreversible in stack, so it's unnecessary to rollback the tc configuration when destroy mqprio failed. Otherwise, it may cause the configuration being inconsistent between driver and netstack. As the failure is usually caused by reset, and the driver will restore the configuration after reset, so it can keep the configuration being consistent between driver and hardware. Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: remove tc enable checkingJian Shen4-17/+2
Currently, in function hns3_nic_set_real_num_queue(), the driver doesn't report the queue count and offset for disabled tc. If user enables multiple TCs, but only maps user priorities to partial of them, it may cause the queue range of the unmapped TC being displayed abnormally. Fix it by removing the tc enable checking, ensure the queue count is not zero. With this change, the tc_en is useless now, so remove it. Fixes: a75a8efa00c5 ("net: hns3: Fix tc setup when netdev is first up") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: hns3: do not allow call hns3_nic_net_open repeatedlyJian Shen1-0/+5
hns3_nic_net_open() is not allowed to called repeatly, but there is no checking for this. When doing device reset and setup tc concurrently, there is a small oppotunity to call hns3_nic_net_open repeatedly, and cause kernel bug by calling napi_enable twice. The calltrace information is like below: [ 3078.222780] ------------[ cut here ]------------ [ 3078.230255] kernel BUG at net/core/dev.c:6991! [ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1 [ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021 [ 3078.276801] Workqueue: hclge hclge_service_task [hclge] [ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 3078.296168] pc : napi_enable+0x80/0x84 tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3] [ 3078.314771] sp : ffff8000108abb20 [ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300 [ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000 [ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880 [ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000 [ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930 [ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4 [ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8 [ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344 [ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938 [ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0 [ 3078.414657] Call trace: [ 3078.418517] napi_enable+0x80/0x84 [ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3] [ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3] [ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge] [ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge] [ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge] [ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge] [ 3078.475675] process_one_work+0x1dc/0x48c [ 3078.481888] worker_thread+0x15c/0x464 [ 3078.487104] kthread+0x160/0x170 [ 3078.492479] ret_from_fork+0x10/0x18 [ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000) [ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]--- Once hns3_nic_net_open() is excute success, the flag HNS3_NIC_STATE_DOWN will be cleared. So add checking for this flag, directly return when HNS3_NIC_STATE_DOWN is no set. Fixes: e888402789b9 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29Merge branch 'mctp-core-updates'David S. Miller8-77/+431
Matt Johnston says: ==================== Updates to MCTP core This series adds timeouts for MCTP tags (a limited resource), and a few other improvements to the MCTP core. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29mctp: Warn if pointer is set for a wrong dev typeMatt Johnston1-7/+24
Should not occur but is a sanity check. May help tracking down Trinity reported issue https://lore.kernel.org/lkml/20210913030701.GA5926@xsang-OptiPlex-9020/ Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29mctp: Set route MTU via netlinkMatt Johnston1-1/+13
A route's RTAX_MTU can be set in nested RTAX_METRICS Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29doc/mctp: Add a little detail about kernel internalsJeremy Kerr1-0/+59
Describe common flows and refcounting behaviour. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29mctp: Do inits as a subsys_initcallJeremy Kerr1-1/+1
In a future change, we'll want to provide a registration call for mctp-specific devices. This requires us to have the networks established before device driver inits, so run the core init as a subsys_initcall. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29mctp: Add tracepoints for tag/key handlingJeremy Kerr3-1/+92
The tag allocation, release and bind events are somewhat opaque outside the kernel; this change adds a few tracepoints to assist in instrumentation and debugging. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29mctp: Implement a timeout for tagsJeremy Kerr3-0/+62
Currently, a MCTP (local-eid,remote-eid,tag) tuple is allocated to a socket on send, and only expires when the socket is closed. This change introduces a tag timeout, freeing the tuple after a fixed expiry - currently six seconds. This is greater than (but close to) the max response timeout in upper-layer bindings. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29mctp: Add refcounts to mctp_devJeremy Kerr4-13/+25
Currently, we tie the struct mctp_dev lifetime to the underlying struct net_device, and hold/put that device as a proxy for a separate mctp_dev refcount. This works because we're not holding any references to the mctp_dev that are different from the netdev lifetime. In a future change we'll break that assumption though, as we'll need to hold mctp_dev references in a workqueue, which might live past the netdev unregister notification. In order to support that, this change introduces a refcount on the mctp_dev, currently taken by the net_device->mctp_ptr reference, and released on netdev unregister events. We can then use this for future references that might outlast the net device. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29mctp: locking, lifetime and validity changes for sk_keysJeremy Kerr3-53/+125
We will want to invalidate sk_keys in a future change, which will require a boolean flag to mark invalidated items in the socket & net namespace lists. We'll also need to take a reference to keys, held over non-atomic contexts, so we need a refcount on keys also. This change adds a validity flag (currently always true) and refcount to struct mctp_sk_key. With a refcount on the keys, using RCU no longer makes much sense; we have exact indications on the lifetime of keys. So, we also change the RCU list traversal to a locked implementation. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29mctp: Allow local delivery to the null EIDJeremy Kerr1-0/+23
We may need to receive packets addressed to the null EID (==0), but addressed to us at the physical layer. This change adds a lookup for local routes when we see a packet addressed to EID 0, and a local phys address. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29mctp: Allow MCTP on tun devicesMatt Johnston2-7/+13
Allowing TUN is useful for testing, to route packets to userspace or to tunnel between machines. Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: phy: micrel: Add support for LAN8804 PHYHoratiu Vultur2-0/+75
The LAN8804 PHY has same features as that of LAN8814 PHY except that it doesn't support 1588, SyncE or Q-USGMII. This PHY is found inside the LAN966X switches. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setupFeng Zhou2-3/+7
The ixgbe driver currently generates a NULL pointer dereference with some machine (online cpus < 63). This is due to the fact that the maximum value of num_xdp_queues is nr_cpu_ids. Code is in "ixgbe_set_rss_queues"". Here's how the problem repeats itself: Some machine (online cpus < 63), And user set num_queues to 63 through ethtool. Code is in the "ixgbe_set_channels", adapter->ring_feature[RING_F_FDIR].limit = count; It becomes 63. When user use xdp, "ixgbe_set_rss_queues" will set queues num. adapter->num_rx_queues = rss_i; adapter->num_tx_queues = rss_i; adapter->num_xdp_queues = ixgbe_xdp_queues(adapter); And rss_i's value is from f = &adapter->ring_feature[RING_F_FDIR]; rss_i = f->indices = f->limit; So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup", for (i = 0; i < adapter->num_rx_queues; i++) if (adapter->xdp_ring[i]->xsk_umem) It leads to panic. Call trace: [exception RIP: ixgbe_xdp+368] RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297 RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90 RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000 R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000 R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235 10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384 11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd 12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb 13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88 14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319 15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290 16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8 17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64 18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9 19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c So I fix ixgbe_max_channels so that it will not allow a setting of queues to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup, take the smaller value of num_rx_queues and num_xdp_queues. Fixes: 4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP") Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller18-144/+584
t-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-09-28 This series contains updates to ice driver only. Dave adds support for QoS DSCP allowing for DSCP to TC mapping via APP TLVs. Ani adds enforcement of DSCP to only supported devices with the introduction of a feature bitmap and corrects messaging of unsupported modules based on link mode. Jake refactors devlink info functions to be void as the functions no longer return errors. Jeff fixes a macro name to properly reflect the value. Len Baker converts a kzalloc allocation to, the preferred, kcalloc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29Merge branch 'octeontx2-ptp-vf'David S. Miller7-38/+66
Subbaraya Sundeep <sbhatta@marvell.com> ==================== octeontx2: Add PTP support for VFs PTP is a shared hardware block which can prepend RX timestamps to packets before directing packets to PFs or VFs and can notify the TX timestamps to PFs or VFs via TX completion queue descriptors. Hence adding PTP support for VFs is exactly similar to PFs with minimal changes. This patchset adds that PTP support for VFs. Patch 1 - When an interface is set in promisc/multicast the same setting is not retained when changing mtu or channels. This is due to toggling of the interface by driver but not calling set_rx_mode in the down-up sequence. Since setting an interface to multicast properly is required for ptp this is addressed in this patch. Patch 2 - Changes in VF driver for registering timestamping ethtool ops and ndo_ioctl. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29octeontx2-nicvf: Add PTP hardware clock support to NIX VFNaveen Mamindlapalli7-3/+23
This patch adds PTP PHC support to NIX VF interfaces. This enables a VF to run PTP master/slave instance. PTP block being a shared hardware resource it is recommended to avoid running multiple PTP instances in the system which will impact the PTP clock accuracy. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29octeontx2-pf: Enable promisc/allmulti match MCAM entries.Rakesh Babu1-35/+43
Whenever the interface is brought up/down then set_rx_mode function is called by the stack which enables promisc/allmulti MCAM entries. But there are cases when driver brings interface down and then up such as while changing number of channels. In these cases promisc/allmulti MCAM entries are left disabled as set_rx_mode callback is not called. This patch enables these MCAM entries in all such cases. Signed-off-by: Rakesh Babu <rsaladi2@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29net: qrtr: combine nameservice into main moduleLuca Weiss2-1/+2
Previously with CONFIG_QRTR=m a separate ns.ko would be built which wasn't done on purpose and should be included in qrtr.ko. Rename qrtr.c to af_qrtr.c so we can build a qrtr.ko with both af_qrtr.c and ns.c. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-By: Steev Klimaszewski <steev@kali.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/20210928171156.6353-1-luca@z3ntu.xyz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-29net: ipv4: remove superfluous header files from fib_notifier.cMianhan Liu1-1/+0
fib_notifier.c hasn't use any macro or function declared in net/netns/ipv4.h. Thus, these files can be removed from fib_notifier.c safely without affecting the compilation of the net/ipv4 module. Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn> Link: https://lore.kernel.org/r/20210928164011.1454-1-liumh1@shanghaitech.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-29net: bridge: mcast: Associate the seqcount with its protecting lock.Thomas Gleixner2-5/+3
The sequence count bridge_mcast_querier::seq is protected by net_bridge::multicast_lock but seqcount_init() does not associate the seqcount with the lock. This leads to a warning on PREEMPT_RT because preemption is still enabled. Let seqcount_init() associate the seqcount with lock that protects the write section. Remove lockdep_assert_held_once() because lockdep already checks whether the associated lock is held. Fixes: 67b746f94ff39 ("net: bridge: mcast: make sure querier port/address updates are consistent") Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Mike Galbraith <efault@gmx.de> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210928141049.593833-1-bigeasy@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-29net: mdio-ipq4019: Fix the error for an optional regs resourceCai Huoqing1-1/+5
The second resource is optional which is only provided on the chipset IPQ5018. But the blamed commit ignores that and if the resource is not there it just fails. the resource is used like this, if (priv->eth_ldo_rdy) { val = readl(priv->eth_ldo_rdy); val |= BIT(0); writel(val, priv->eth_ldo_rdy); fsleep(IPQ_PHY_SET_DELAY_US); } This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: fa14d03e014a ("net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()") Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210928134849.2092-1-caihuoqing@baidu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-29Merge tag 'pinctrl-v5.15-2' of ↵Linus Torvalds8-9/+150
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some few pin control fixes for the v5.15 kernel cycle. The most critical is the AMD fixes. - Fix wakeup interrupts in the AMD driver affecting AMD laptops. - Fix parent irqspec translation in the Qualcomm SPMI GPIO driver. - Fix deferred probe handling in the Rockchip driver, this is a stopgap solution while we look for something more elegant. - Add PM suspend callbacks to the Qualcomm SC7280 driver. - Some minor doc fix (should have come in earlier, sorry)" * tag 'pinctrl-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: sc7280: Add PM suspend callbacks gpio/rockchip: fetch deferred output settings on probe pinctrl/rockchip: add a queue for deferred pin output settings on probe pinctrl: qcom: spmi-gpio: correct parent irqspec translation pinctrl: amd: Handle wake-up interrupt pinctrl: amd: Add irq field data pinctrl: core: Remove duplicated word from devm_pinctrl_unregister()
2021-09-29Merge tag 'vfio-v5.15-rc4' of git://github.com/awilliam/linux-vfioLinus Torvalds2-2/+4
Pull VFIO fixes from Alex Williamson: - Fix vfio-ap leak on uninit (Jason Gunthorpe) - Add missing prototype arg name (Colin Ian King) * tag 'vfio-v5.15-rc4' of git://github.com/awilliam/linux-vfio: vfio/ap_ops: Add missed vfio_uninit_group_dev() vfio/pci: add missing identifier name in argument of function prototype
2021-09-28Merge tag 'm68k-for-v5.15-tag3' of ↵Linus Torvalds24-354/+301
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull more m68k updates from Geert Uytterhoeven: - signal handling fixes - removal of set_fs() [ The set_fs removal isn't strictly a fix, but it's been pending for a while and is very welcome. The signal handling fixes resolved an issue that was incorrectly attributed to the set_fs changes - Linus ] * tag 'm68k-for-v5.15-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Remove set_fs() m68k: Provide __{get,put}_kernel_nofault m68k: Factor the 8-byte lowlevel {get,put}_user code into helpers m68k: Use BUILD_BUG for passing invalid sizes to get_user/put_user m68k: Remove the 030 case in virt_to_phys_slow m68k: Document that access_ok is broken for !CONFIG_CPU_HAS_ADDRESS_SPACES m68k: Leave stack mangling to asm wrapper of sigreturn() m68k: Update ->thread.esp0 before calling syscall_trace() in ret_from_signal m68k: Handle arrivals of multiple signals correctly
2021-09-28Merge tag 'nios2_fixes_for_v5.15_part1' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux Pull nios2 fixes from Dinh Nguyen: - Fix build warning for unmet dependency for EARLY_PRINTK - Remove unused dram_start() function * tag 'nios2_fixes_for_v5.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: NIOS2: setup.c: drop unused variable 'dram_start' NIOS2: fix kconfig unmet dependency warning for SERIAL_CORE_CONSOLE
2021-09-28ice: Prefer kcalloc over open coded arithmeticLen Baker1-1/+1
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. In this case this is not actually dynamic sizes: both sides of the multiplication are constant values. However it is best to refactor this anyway, just to keep the open-coded math idiom out of code. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Fix macro name for IPv4 fragment flagJeff Guo2-2/+2
In IPv4 header, fragment flags indicate whether the packet needs to be fragmented or not. The value 0x20 represents MF (More Fragment); fix the macro name to match this. Signed-off-by: Ting Xu <ting.xu@intel.com> Signed-off-by: Jeff Guo <jia.guo@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: refactor devlink getter/fallback functions to voidJacob Keller1-83/+50
After commit a8f89fa27773 ("ice: do not abort devlink info if board identifier can't be found"), the getter/fallback() functions no longer report an error. Convert the interface to a void so that it is no longer possible to add a version field that is fatal. This makes sense, because we should not fail to report other versions just because one of the version pieces could not be found. Finally, clean up the getter functions line wrapping so that none of them take more than 80 columns, as is the usual style for networking files. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Fix link mode handlingAnirudh Venkataramanan1-2/+6
The messaging for unsupported module detection is different for lenient mode and strict mode. Update the code to print the right messaging for a given link mode. Media topology conflict is not an error in lenient mode, so return an error code only if not in lenient mode. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Add feature bitmap, helpers and a check for DSCPAnirudh Venkataramanan5-2/+63
DSCP a.k.a L3 QoS is only supported on certain devices. To enforce this, this patch introduces a bitmap of features and helper functions. The feature bitmap is set based on device IDs on driver init. Currently, DSCP is the only feature in this bitmap, but there will be more in the future. In the DCB netlink flow, check if the feature bit is set before exercising DSCP. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Add DSCP supportDave Ertman11-56/+464
Implement code to handle submission of APP TLV's containing DSCP to TC mapping. The first such mapping received on an interface will cause that PF to switch to L3 DSCP QoS mode, apply the default config for that mode, and apply the received mapping. Only one such mapping will be allowed per DSCP value, and when the last DSCP mapping is deleted, the PF will switch back into L2 VLAN QoS mode, applying the appropriate default QoS settings. L3 DSCP QoS mode will only be allowed in SW DCBx mode, in other words, when the FW LLDP engine is disabled. Commands that break this mutual exclusivity will be blocked. Co-developed-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28Merge tag 'fsverity-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt Pull fsverity fix from Eric Biggers: "Fix an integer overflow when computing the Merkle tree layout of extremely large files, exposed by btrfs adding support for fs-verity" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fs-verity: fix signed integer overflow with i_size near S64_MAX
2021-09-28Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds4-7/+17
Pull virtio/vdpa fixes from Michael Tsirkin: "Fixes up some issues in rc1" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa: potential uninitialized return in vhost_vdpa_va_map() vdpa/mlx5: Avoid executing set_vq_ready() if device is reset vdpa/mlx5: Clear ready indication for control VQ vduse: Cleanup the old kernel states after reset failure vduse: missing error code in vduse_init() virtio: don't fail on !of_device_is_compatible
2021-09-28Merge tag 'mmc-v5.15-2' of ↵Linus Torvalds2-3/+14
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - renesas_sdhi: Fix regression with hard reset on old SDHIs - dw_mmc: Only inject fault before done/error * tag 'mmc-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi: fix regression with hard reset on old SDHIs mmc: dw_mmc: Only inject fault before done/error
2021-09-28gve: DQO: avoid unused variable warningsArnd Bergmann3-66/+54
The use of dma_unmap_addr()/dma_unmap_len() in the driver causes multiple warnings when these macros are defined as empty, e.g. in an ARCH=i386 allmodconfig build: drivers/net/ethernet/google/gve/gve_tx_dqo.c: In function 'gve_tx_add_skb_no_copy_dqo': drivers/net/ethernet/google/gve/gve_tx_dqo.c:494:40: error: unused variable 'buf' [-Werror=unused-variable] 494 | struct gve_tx_dma_buf *buf = This is not how the NEED_DMA_MAP_STATE macros are meant to work, as they rely on never using local variables or a temporary structure like gve_tx_dma_buf. Remote the gve_tx_dma_buf definition and open-code the contents in all places to avoid the warning. This causes some rather long lines but otherwise ends up making the driver slightly smaller. Fixes: a57e5de476be ("gve: DQO: Add TX path") Link: https://lore.kernel.org/netdev/20210723231957.1113800-1-bcf@google.com/ Link: https://lore.kernel.org/netdev/20210721151100.2042139-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28octeontx2-pf: Use hardware register for CQE countGeetha sowjanya5-7/+85
Current driver uses software CQ head pointer to poll on CQE header in memory to determine if CQE is valid. Software needs to make sure, that the reads of the CQE do not get re-ordered so much that it ends up with an inconsistent view of the CQE. To ensure that DMB barrier after read to first CQE cacheline and before reading of the rest of the CQE is needed. But having barrier for every CQE read will impact the performance, instead use hardware CQ head and tail pointers to find the valid number of CQEs. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller11-53/+139
Daniel Borkmann says: ==================== pull-request: bpf 2021-09-28 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 14 day(s) which contain a total of 11 files changed, 139 insertions(+), 53 deletions(-). The main changes are: 1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk. 2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh. 3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann. 4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi. 5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer. 6) Fix return value handling for struct_ops BPF programs, from Hou Tao. 7) Various fixes to BPF selftests, from Jiri Benc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> ,
2021-09-28Merge branch 'octeontx2-af-external-ptp-clock'David S. Miller13-79/+292
Hariprasad Kelam says: ==================== Externel ptp clock support Externel ptp support is required in a scenario like connecting a external timing device to the chip for time synchronization. This series of patches adds support to ptp driver to use external clock and enables PTP config in CN10K MAC block (RPM). Currently PTP configuration is left unchanged in FLR handler these patches addresses the same. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> ,
2021-09-28octeontx2-af: Add external ptp input clockYi Guo7-6/+187
PTP hardware block can be configured to utilize the external clock. Also the current ptp timestamp can be captured when external trigger is applied on a gpio pin. These features are required in scenarios like connecting a external timing device to the chip for time synchronization. The timing device provides the clock and trigger(PPS signal) to the PTP block. This patch does the following: 1. configures PTP block to use external clock frequency and timestamp capture on external event. 2. sends PTP_REQ_EXTTS events to kernel ptp phc susbsytem with captured timestamps 3. aligns PPS edge to adjusted ptp clock in the ptp device by setting the PPS_THRESH to the reminder of the last timestamp value captured by external PPS Signed-off-by: Yi Guo <yig@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28octeontx2-af: Use ptp input clock info from firmware dataSubbaraya Sundeep3-51/+33
The input clock frequency of PTP block is figured out from hardware reset block currently. The firmware data already has this info in sclk. Hence simplify ptp driver to use sclk from firmware data. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28octeontx2-af: cn10k: RPM hardware timestamp configurationHariprasad Kelam7-26/+58
MAC on CN10K support hardware timestamping such that 8 bytes addition header is prepended to incoming packets. This patch does necessary configuration to enable Hardware time stamping upon receiving request from PF netdev interfaces. Timestamp configuration is different on MAC (CGX) Octeontx2 silicon and MAC (RPM) OcteonTX3 CN10k. Based on silicon variant appropriate fn() pointer is called. Refactor MAC specific mbox messages to remove unnecessary gaps in mboxids. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28octeontx2-af: Reset PTP config in FLR handlerHarman Kalra3-0/+18
Upon receiving ptp config request from netdev interface , Octeontx2 MAC block CGX is configured to append timestamp to every incoming packet and NPC config is updated with DMAC offset change. Currently this configuration is not reset in FLR handler. This patch resets the same. Signed-off-by: Harman Kalra <hkalra@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28net: hns3: fix hclge_dbg_dump_tm_pg() stack usageArnd Bergmann1-4/+24
This function copies strings around between multiple buffers including a large on-stack array that causes a build warning on 32-bit systems: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=] The function can probably be cleaned up a lot, to go back to printing directly into the output buffer, but dynamically allocating the structure is a simpler workaround for now. Fixes: 04d96139ddb3 ("net: hns3: refine function hclge_dbg_dump_tm_pri()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28net: mdio: mscc-miim: Fix the mdio controllerHoratiu Vultur1-5/+10
According to the documentation the second resource is optional. But the blamed commit ignores that and if the resource is not there it just fails. This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: 672a1c394950 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28net/tls: support SM4 CCM algorithmTianjia Zhang2-5/+18
The IV of CCM mode has special requirements, this patch supports CCM mode of SM4 algorithm. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 17:32:01 +0300