| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* kvm-arm64/pmu-unchained:
: .
: PMUv3 fixes and improvements:
:
: - Make the CHAIN event handling strictly follow the architecture
:
: - Add support for PMUv3p5 (64bit counters all the way)
:
: - Various fixes and cleanups
: .
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: arm64: PMU: Sanitise PMCR_EL0.LP on first vcpu run
KVM: arm64: PMU: Simplify PMCR_EL0 reset handling
KVM: arm64: PMU: Replace version number '0' with ID_AA64DFR0_EL1_PMUVer_NI
KVM: arm64: PMU: Make kvm_pmc the main data structure
KVM: arm64: PMU: Simplify vcpu computation on perf overflow notification
KVM: arm64: PMU: Allow PMUv3p5 to be exposed to the guest
KVM: arm64: PMU: Implement PMUv3p5 long counter support
KVM: arm64: PMU: Allow ID_DFR0_EL1.PerfMon to be set from userspace
KVM: arm64: PMU: Allow ID_AA64DFR0_EL1.PMUver to be set from userspace
KVM: arm64: PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation
KVM: arm64: PMU: Do not let AArch32 change the counters' top 32 bits
KVM: arm64: PMU: Simplify setting a counter to a specific value
KVM: arm64: PMU: Add counter_index_to_*reg() helpers
KVM: arm64: PMU: Only narrow counters that are not 64bit wide
KVM: arm64: PMU: Narrow the overflow checking when required
KVM: arm64: PMU: Distinguish between 64bit counter and 64bit overflow
KVM: arm64: PMU: Always advertise the CHAIN event
KVM: arm64: PMU: Align chained counter implementation with architecture pseudocode
arm64: Add ID_DFR0_EL1.PerfMon values for PMUv3p7 and IMP_DEF
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/mte-map-shared:
: .
: Update the MTE support to allow the VMM to use shared mappings
: to back the memslots exposed to MTE-enabled guests.
:
: Patches courtesy of Catalin Marinas and Peter Collingbourne.
: .
: Fix a number of issues with MTE, such as races on the tags
: being initialised vs the PG_mte_tagged flag as well as the
: lack of support for VM_SHARED when KVM is involved.
:
: Patches from Catalin Marinas and Peter Collingbourne.
: .
Documentation: document the ABI changes for KVM_CAP_ARM_MTE
KVM: arm64: permit all VM_MTE_ALLOWED mappings with MTE enabled
KVM: arm64: unify the tests for VMAs in memslots when MTE is enabled
arm64: mte: Lock a page for MTE tag initialisation
mm: Add PG_arch_3 page flag
KVM: arm64: Simplify the sanitise_mte_tags() logic
arm64: mte: Fix/clarify the PG_mte_tagged semantics
mm: Do not enable PG_arch_2 for all 64-bit architectures
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pkvm-vcpu-state: (25 commits)
: .
: Large drop of pKVM patches from Will Deacon and co, adding
: a private vm/vcpu state at EL2, managed independently from
: the EL1 state. From the cover letter:
:
: "This is version six of the pKVM EL2 state series, extending the pKVM
: hypervisor code so that it can dynamically instantiate and manage VM
: data structures without the host being able to access them directly.
: These structures consist of a hyp VM, a set of hyp vCPUs and the stage-2
: page-table for the MMU. The pages used to hold the hypervisor structures
: are returned to the host when the VM is destroyed."
: .
KVM: arm64: Use the pKVM hyp vCPU structure in handle___kvm_vcpu_run()
KVM: arm64: Don't unnecessarily map host kernel sections at EL2
KVM: arm64: Explicitly map 'kvm_vgic_global_state' at EL2
KVM: arm64: Maintain a copy of 'kvm_arm_vmid_bits' at EL2
KVM: arm64: Unmap 'kvm_arm_hyp_percpu_base' from the host
KVM: arm64: Return guest memory from EL2 via dedicated teardown memcache
KVM: arm64: Instantiate guest stage-2 page-tables at EL2
KVM: arm64: Consolidate stage-2 initialisation into a single function
KVM: arm64: Add generic hyp_memcache helpers
KVM: arm64: Provide I-cache invalidation by virtual address at EL2
KVM: arm64: Initialise hypervisor copies of host symbols unconditionally
KVM: arm64: Add per-cpu fixmap infrastructure at EL2
KVM: arm64: Instantiate pKVM hypervisor VM and vCPU structures from EL1
KVM: arm64: Add infrastructure to create and track pKVM instances at EL2
KVM: arm64: Rename 'host_kvm' to 'host_mmu'
KVM: arm64: Add hyp_spinlock_t static initializer
KVM: arm64: Include asm/kvm_mmu.h in nvhe/mem_protect.h
KVM: arm64: Add helpers to pin memory shared with the hypervisor at EL2
KVM: arm64: Prevent the donation of no-map pages
KVM: arm64: Implement do_donate() helper for donating memory
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/parallel-faults:
: .
: Parallel stage-2 fault handling, courtesy of Oliver Upton.
: From the cover letter:
:
: "Presently KVM only takes a read lock for stage 2 faults if it believes
: the fault can be fixed by relaxing permissions on a PTE (write unprotect
: for dirty logging). Otherwise, stage 2 faults grab the write lock, which
: predictably can pile up all the vCPUs in a sufficiently large VM.
:
: Like the TDP MMU for x86, this series loosens the locking around
: manipulations of the stage 2 page tables to allow parallel faults. RCU
: and atomics are exploited to safely build/destroy the stage 2 page
: tables in light of multiple software observers."
: .
KVM: arm64: Reject shared table walks in the hyp code
KVM: arm64: Don't acquire RCU read lock for exclusive table walks
KVM: arm64: Take a pointer to walker data in kvm_dereference_pteref()
KVM: arm64: Handle stage-2 faults in parallel
KVM: arm64: Make table->block changes parallel-aware
KVM: arm64: Make leaf->leaf PTE changes parallel-aware
KVM: arm64: Make block->table PTE changes parallel-aware
KVM: arm64: Split init and set for table PTE
KVM: arm64: Atomically update stage 2 leaf attributes in parallel walks
KVM: arm64: Protect stage-2 traversal with RCU
KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make
KVM: arm64: Use an opaque type for pteps
KVM: arm64: Add a helper to tear down unlinked stage-2 subtrees
KVM: arm64: Don't pass kvm_pgtable through kvm_pgtable_walk_data
KVM: arm64: Pass mm_ops through the visitor context
KVM: arm64: Stash observed pte value in visitor context
KVM: arm64: Combine visitor arguments into a context structure
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/dirty-ring:
: .
: Add support for the "per-vcpu dirty-ring tracking with a bitmap
: and sprinkles on top", courtesy of Gavin Shan.
:
: This branch drags the kvmarm-fixes-6.1-3 tag which was already
: merged in 6.1-rc4 so that the branch is in a working state.
: .
KVM: Push dirty information unconditionally to backup bitmap
KVM: selftests: Automate choosing dirty ring size in dirty_log_test
KVM: selftests: Clear dirty ring states between two modes in dirty_log_test
KVM: selftests: Use host page size to map ring buffer in dirty_log_test
KVM: arm64: Enable ring-based dirty memory tracking
KVM: Support dirty ring in conjunction with bitmap
KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h
KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/52bit-fixes:
: .
: 52bit PA fixes, courtesy of Ryan Roberts. From the cover letter:
:
: "I've been adding support for FEAT_LPA2 to KVM and as part of that work have been
: testing various (84) configurations of HW, host and guest kernels on FVP. This
: has thrown up a couple of pre-existing bugs, for which the fixes are provided."
: .
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: Fix PAR_TO_HPFAR() to work independently of PA_BITS.
KVM: arm64: Fix kvm init failure when mode!=vhe and VA_BITS=52.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
get_user_mapping_size() uses kvm's pgtable library to walk a user space
page table created by the kernel, and in doing so, passes metadata
that the library needs, including ia_bits, which defines the size of the
input address.
For the case where the kernel is compiled for 52 VA bits but runs on HW
that does not support LVA, it will fall back to 48 VA bits at runtime.
Therefore we must use vabits_actual rather than VA_BITS to get the true
address size.
This is benign in the current code base because the pgtable library only
uses it for error checking.
Fixes: 6011cf68c885 ("KVM: arm64: Walk userspace page tables to compute the THP mapping size")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221205114031.3972780-1-ryan.roberts@arm.com
|
|
* kvm-arm64/selftest/access-tracking:
: .
: Small series to add support for arm64 to access_tracking_perf_test and
: correct a couple bugs along the way.
:
: Patches courtesy of Oliver Upton.
: .
KVM: selftests: Build access_tracking_perf_test for arm64
KVM: selftests: Have perf_test_util signal when to stop vCPUs
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/selftest/s2-faults:
: .
: New KVM/arm64 selftests exercising various sorts of S2 faults, courtesy
: of Ricardo Koller. From the cover letter:
:
: "This series adds a new aarch64 selftest for testing stage 2 fault handling
: for various combinations of guest accesses (e.g., write, S1PTW), backing
: sources (e.g., anon), and types of faults (e.g., read on hugetlbfs with a
: hole, write on a readonly memslot). Each test tries a different combination
: and then checks that the access results in the right behavior (e.g., uffd
: faults with the right address and write/read flag). [...]"
: .
KVM: selftests: aarch64: Add mix of tests into page_fault_test
KVM: selftests: aarch64: Add readonly memslot tests into page_fault_test
KVM: selftests: aarch64: Add dirty logging tests into page_fault_test
KVM: selftests: aarch64: Add userfaultfd tests into page_fault_test
KVM: selftests: aarch64: Add aarch64/page_fault_test
KVM: selftests: Use the right memslot for code, page-tables, and data allocations
KVM: selftests: Fix alignment in virt_arch_pgd_alloc() and vm_vaddr_alloc()
KVM: selftests: Add vm->memslots[] and enum kvm_mem_region_type
KVM: selftests: Stash backing_src_type in struct userspace_mem_region
tools: Copy bitfield.h from the kernel sources
KVM: selftests: aarch64: Construct DEFAULT_MAIR_EL1 using sysreg.h macros
KVM: selftests: Add missing close and munmap in __vm_mem_region_delete()
KVM: selftests: aarch64: Add virt_get_pte_hva() library function
KVM: selftests: Add a userfaultfd library
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/selftest/linked-bps:
: .
: Additional selftests for the arm64 breakpoints/watchpoints,
: courtesy of Reiji Watanabe. From the cover letter:
:
: "This series adds test cases for linked {break,watch}points to the
: debug-exceptions test, and expands {break,watch}point tests to
: use non-zero {break,watch}points (the current test always uses
: {break,watch}point#0)."
: .
KVM: arm64: selftests: Test with every breakpoint/watchpoint
KVM: arm64: selftests: Add a test case for a linked watchpoint
KVM: arm64: selftests: Add a test case for a linked breakpoint
KVM: arm64: selftests: Change debug_version() to take ID_AA64DFR0_EL1
KVM: arm64: selftests: Stop unnecessary test stage tracking of debug-exceptions
KVM: arm64: selftests: Add helpers to enable debug exceptions
KVM: arm64: selftests: Remove the hard-coded {b,w}pn#0 from debug-exceptions
KVM: arm64: selftests: Add write_dbg{b,w}{c,v}r helpers in debug-exceptions
KVM: arm64: selftests: Use FIELD_GET() to extract ID register fields
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/selftest/memslot-fixes:
: .
: KVM memslot selftest fixes for non-4kB page sizes, courtesy
: of Gavin Shan. From the cover letter:
:
: "kvm/selftests/memslots_perf_test doesn't work with 64KB-page-size-host
: and 4KB-page-size-guest on aarch64. In the implementation, the host and
: guest page size have been hardcoded to 4KB. It's ovbiously not working
: on aarch64 which supports 4KB, 16KB, 64KB individually on host and guest.
:
: This series tries to fix it. After the series is applied, the test runs
: successfully with 64KB-page-size-host and 4KB-page-size-guest."
: .
KVM: selftests: memslot_perf_test: Report optimal memory slots
KVM: selftests: memslot_perf_test: Consolidate memory
KVM: selftests: memslot_perf_test: Support variable guest page size
KVM: selftests: memslot_perf_test: Probe memory slots for once
KVM: selftests: memslot_perf_test: Consolidate loop conditions in prepare_vm()
KVM: selftests: memslot_perf_test: Use data->nslots in prepare_vm()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Fix the bogus masking when computing the period of a 64bit counter
with 32bit overflow. It really should be treated like a 32bit counter
for the purpose of the period.
Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/Y4jbosgHbUDI0WF4@google.com
|
|
Does exactly what it says on the tin.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118211503.4049023-3-oliver.upton@linux.dev
|
|
Signal that a test run is complete through perf_test_args instead of
having tests open code a similar solution. Ensure that the field resets
to false at the beginning of a test run as the structure is reused
between test runs, eliminating a couple of bugs:
access_tracking_perf_test hangs indefinitely on a subsequent test run,
as 'done' remains true. The bug doesn't amount to much right now, as x86
supports a single guest mode. However, this is a precondition of
enabling the test for other architectures with >1 guest mode, like
arm64.
memslot_modification_stress_test has the exact opposite problem, where
subsequent test runs complete immediately as 'run_vcpus' remains false.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[oliver: added commit message, preserve spin_wait_for_next_iteration()]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118211503.4049023-2-oliver.upton@linux.dev
|
|
Document both the restriction on VM_MTE_ALLOWED mappings and
the relaxation for shared mappings.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-9-pcc@google.com
|
|
Certain VMMs such as crosvm have features (e.g. sandboxing) that depend
on being able to map guest memory as MAP_SHARED. The current restriction
on sharing MAP_SHARED pages with the guest is preventing the use of
those features with MTE. Now that the races between tasks concurrently
clearing tags on the same page have been fixed, remove this restriction.
Note that this is a relaxation of the ABI.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-8-pcc@google.com
|
|
Previously we allowed creating a memslot containing a private mapping that
was not VM_MTE_ALLOWED, but would later reject KVM_RUN with -EFAULT. Now
we reject the memory region at memslot creation time.
Since this is a minor tweak to the ABI (a VMM that created one of
these memslots would fail later anyway), no VMM to my knowledge has
MTE support yet, and the hardware with the necessary features is not
generally available, we can probably make this ABI change at this point.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-7-pcc@google.com
|
|
Initialising the tags and setting PG_mte_tagged flag for a page can race
between multiple set_pte_at() on shared pages or setting the stage 2 pte
via user_mem_abort(). Introduce a new PG_mte_lock flag as PG_arch_3 and
set it before attempting page initialisation. Given that PG_mte_tagged
is never cleared for a page, consider setting this flag to mean page
unlocked and wait on this bit with acquire semantics if the page is
locked:
- try_page_mte_tagging() - lock the page for tagging, return true if it
can be tagged, false if already tagged. No acquire semantics if it
returns true (PG_mte_tagged not set) as there is no serialisation with
a previous set_page_mte_tagged().
- set_page_mte_tagged() - set PG_mte_tagged with release semantics.
The two-bit locking is based on Peter Collingbourne's idea.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-6-pcc@google.com
|
|
As with PG_arch_2, this flag is only allowed on 64-bit architectures due
to the shortage of bits available. It will be used by the arm64 MTE code
in subsequent patches.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Steven Price <steven.price@arm.com>
[catalin.marinas@arm.com: added flag preserving in __split_huge_page_tail()]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-5-pcc@google.com
|
|
Currently sanitise_mte_tags() checks if it's an online page before
attempting to sanitise the tags. Such detection should be done in the
caller via the VM_MTE_ALLOWED vma flag. Since kvm_set_spte_gfn() does
not have the vma, leave the page unmapped if not already tagged. Tag
initialisation will be done on a subsequent access fault in
user_mem_abort().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[pcc@google.com: fix the page initializer]
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-4-pcc@google.com
|
|
Currently the PG_mte_tagged page flag mostly means the page contains
valid tags and it should be set after the tags have been cleared or
restored. However, in mte_sync_tags() it is set before setting the tags
to avoid, in theory, a race with concurrent mprotect(PROT_MTE) for
shared pages. However, a concurrent mprotect(PROT_MTE) with a copy on
write in another thread can cause the new page to have stale tags.
Similarly, tag reading via ptrace() can read stale tags if the
PG_mte_tagged flag is set before actually clearing/restoring the tags.
Fix the PG_mte_tagged semantics so that it is only set after the tags
have been cleared or restored. This is safe for swap restoring into a
MAP_SHARED or CoW page since the core code takes the page lock. Add two
functions to test and set the PG_mte_tagged flag with acquire and
release semantics. The downside is that concurrent mprotect(PROT_MTE) on
a MAP_SHARED page may cause tag loss. This is already the case for KVM
guests if a VMM changes the page protection while the guest triggers a
user_mem_abort().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[pcc@google.com: fix build with CONFIG_ARM64_MTE disabled]
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-3-pcc@google.com
|
|
Commit 4beba9486abd ("mm: Add PG_arch_2 page flag") introduced a new
page flag for all 64-bit architectures. However, even if an architecture
is 64-bit, it may still have limited spare bits in the 'flags' member of
'struct page'. This may happen if an architecture enables SPARSEMEM
without SPARSEMEM_VMEMMAP as is the case with the newly added loongarch.
This architecture port needs 19 more bits for the sparsemem section
information and, while it is currently fine with PG_arch_2, adding any
more PG_arch_* flags will trigger build-time warnings.
Add a new CONFIG_ARCH_USES_PG_ARCH_X option which can be selected by
architectures that need more PG_arch_* flags beyond PG_arch_1. Select it
on arm64.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[pcc@google.com: fix build with CONFIG_ARM64_MTE disabled]
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Price <steven.price@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-2-pcc@google.com
|
|
Userspace can play some dirty tricks on us by selecting a given
PMU version (such as PMUv3p5), restore a PMCR_EL0 value that
has PMCR_EL0.LP set, and then switch the PMU version to PMUv3p1,
for example. In this situation, we end-up with PMCR_EL0.LP being
set and spreading havoc in the PMU emulation.
This is specially hard as the first two step can be done on
one vcpu and the third step on another, meaning that we need
to sanitise *all* vcpus when the PMU version is changed.
In orer to avoid a pretty complicated locking situation,
defer the sanitisation of PMCR_EL0 to the point where the
vcpu is actually run for the first tine, using the existing
KVM_REQ_RELOAD_PMU request that calls into kvm_pmu_handle_pmcr().
There is still an obscure corner case where userspace could
do the above trick, and then save the VM without running it.
They would then observe an inconsistent state (PMUv3.1 + LP set),
but that state will be fixed on the first run anyway whenever
the guest gets restored on a host.
Reported-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Resetting PMCR_EL0 is a pretty involved process that includes
poisoning some of the writable bits, just because we can.
It makes it hard to reason about about what gets configured,
and just resetting things to 0 seems like a much saner option.
Reduce reset_pmcr() to just preserving PMCR_EL0.N from the host,
and setting PMCR_EL0.LC if we don't support AArch32.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
kvm_host_pmu_init() returns when detected PMU is either not implemented, or
implementation defined. kvm_pmu_probe_armpmu() also has a similar situation.
Extracted ID_AA64DFR0_EL1_PMUVer value, when PMU is not implemented is '0',
which can be replaced with ID_AA64DFR0_EL1_PMUVer_NI defined as '0b0000'.
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-perf-users@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221128135629.118346-1-anshuman.khandual@arm.com
|
|
Exclusive table walks are the only supported table walk in the hyp, as
there is no construct like RCU available in the hypervisor code. Reject
any attempt to do a shared table walk by returning an error and allowing
the caller to clean up the mess.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118182222.3932898-4-oliver.upton@linux.dev
|
|
Marek reported a BUG resulting from the recent parallel faults changes,
as the hyp stage-1 map walker attempted to allocate table memory while
holding the RCU read lock:
BUG: sleeping function called from invalid context at
include/linux/sched/mm.h:274
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
2 locks held by swapper/0/1:
#0: ffff80000a8a44d0 (kvm_hyp_pgd_mutex){+.+.}-{3:3}, at:
__create_hyp_mappings+0x80/0xc4
#1: ffff80000a927720 (rcu_read_lock){....}-{1:2}, at:
kvm_pgtable_walk+0x0/0x1f4
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc3+ #5918
Hardware name: Raspberry Pi 3 Model B (DT)
Call trace:
dump_backtrace.part.0+0xe4/0xf0
show_stack+0x18/0x40
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
__might_resched+0x178/0x220
__might_sleep+0x48/0xa0
prepare_alloc_pages+0x178/0x1a0
__alloc_pages+0x9c/0x109c
alloc_page_interleave+0x1c/0xc4
alloc_pages+0xec/0x160
get_zeroed_page+0x1c/0x44
kvm_hyp_zalloc_page+0x14/0x20
hyp_map_walker+0xd4/0x134
kvm_pgtable_visitor_cb.isra.0+0x38/0x5c
__kvm_pgtable_walk+0x1a4/0x220
kvm_pgtable_walk+0x104/0x1f4
kvm_pgtable_hyp_map+0x80/0xc4
__create_hyp_mappings+0x9c/0xc4
kvm_mmu_init+0x144/0x1cc
kvm_arch_init+0xe4/0xef4
kvm_init+0x3c/0x3d0
arm_init+0x20/0x30
do_one_initcall+0x74/0x400
kernel_init_freeable+0x2e0/0x350
kernel_init+0x24/0x130
ret_from_fork+0x10/0x20
Since the hyp stage-1 table walkers are serialized by kvm_hyp_pgd_mutex,
RCU protection really doesn't add anything. Don't acquire the RCU read
lock for an exclusive walk.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118182222.3932898-3-oliver.upton@linux.dev
|
|
Rather than passing through the state of the KVM_PGTABLE_WALK_SHARED
flag, just take a pointer to the whole walker structure instead. Move
around struct kvm_pgtable and the RCU indirection such that the
associated ifdeffery remains in one place while ensuring the walker +
flags definitions precede their use.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118182222.3932898-2-oliver.upton@linux.dev
|
|
The PMU code has historically been torn between referencing a counter
as a pair vcpu+index or as the PMC pointer.
Given that it is pretty easy to go from one representation to
the other, standardise on the latter which, IMHO, makes the
code slightly more readable. YMMV.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-17-maz@kernel.org
|
|
The way we compute the target vcpu on getting an overflow is
a bit odd, as we use the PMC array as an anchor for kvm_pmc_to_vcpu,
while we could directly compute the correct address.
Get rid of the intermediate step and directly compute the target
vcpu.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-16-maz@kernel.org
|
|
Now that the infrastructure is in place, bump the PMU support up
to PMUv3p5.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-15-maz@kernel.org
|
|
PMUv3p5 (which is mandatory with ARMv8.5) comes with some extra
features:
- All counters are 64bit
- The overflow point is controlled by the PMCR_EL0.LP bit
Add the required checks in the helpers that control counter
width and overflow, as well as the sysreg handling for the LP
bit. A new kvm_pmu_is_3p5() helper makes it easy to spot the
PMUv3p5 specific handling.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-14-maz@kernel.org
|
|
Allow userspace to write ID_DFR0_EL1, on the condition that only
the PerfMon field can be altered and be something that is compatible
with what was computed for the AArch64 view of the guest.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-13-maz@kernel.org
|
|
Allow userspace to write ID_AA64DFR0_EL1, on the condition that only
the PMUver field can be altered and be at most the one that was
initially computed for the guest.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-12-maz@kernel.org
|
|
As further patches will enable the selection of a PMU revision
from userspace, sample the supported PMU revision at VM creation
time, rather than building each time the ID_AA64DFR0_EL1 register
is accessed.
This shouldn't result in any change in behaviour.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-11-maz@kernel.org
|
|
Even when using PMUv3p5 (which implies 64bit counters), there is
no way for AArch32 to write to the top 32 bits of the counters.
The only way to influence these bits (other than by counting
events) is by writing PMCR.P==1.
Make sure we obey the architecture and preserve the top 32 bits
on a counter update.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-10-maz@kernel.org
|
|
kvm_pmu_set_counter_value() is pretty odd, as it tries to update
the counter value while taking into account the value that is
currently held by the running perf counter.
This is not only complicated, this is quite wrong. Nowhere in
the architecture is it said that the counter would be offset
by something that is pending. The counter should be updated
with the value set by SW, and start counting from there if
required.
Remove the odd computation and just assign the provided value
after having released the perf event (which is then restarted).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-9-maz@kernel.org
|
|
In order to reduce the boilerplate code, add two helpers returning
the counter register index (resp. the event register) in the vcpu
register file from the counter index.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-8-maz@kernel.org
|
|
The current PMU emulation sometimes narrows counters to 32bit
if the counter isn't the cycle counter. As this is going to
change with PMUv3p5 where the counters are all 64bit, fix
the couple of cases where this happens unconditionally.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20221113163832.3154370-7-maz@kernel.org
|
|
For 64bit counters that overflow on a 32bit boundary, make
sure we only check the bottom 32bit to generate a CHAIN event.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20221113163832.3154370-6-maz@kernel.org
|
|
The PMU architecture makes a subtle difference between a 64bit
counter and a counter that has a 64bit overflow. This is for example
the case of the cycle counter, which can generate an overflow on
a 32bit boundary if PMCR_EL0.LC==0 despite the accumulation being
done on 64 bits.
Use this distinction in the few cases where it matters in the code,
as we will reuse this with PMUv3p5 long counters.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-5-maz@kernel.org
|
|
Even when the underlying HW doesn't offer the CHAIN event
(which happens with QEMU), we can always support it as we're
in control of the counter overflow.
Always advertise the event via PMCEID0_EL0.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-4-maz@kernel.org
|
|
pseudocode
Ricardo recently pointed out that the PMU chained counter emulation
in KVM wasn't quite behaving like the one on actual hardware, in
the sense that a chained counter would expose an overflow on
both halves of a chained counter, while KVM would only expose the
overflow on the top half.
The difference is subtle, but significant. What does the architecture
say (DDI0087 H.a):
- Up to PMUv3p4, all counters but the cycle counter are 32bit
- A 32bit counter that overflows generates a CHAIN event on the
adjacent counter after exposing its own overflow status
- The CHAIN event is accounted if the counter is correctly
configured (CHAIN event selected and counter enabled)
This all means that our current implementation (which uses 64bit
perf events) prevents us from emulating this overflow on the lower half.
How to fix this? By implementing the above, to the letter.
This largely results in code deletion, removing the notions of
"counter pair", "chained counters", and "canonical counter".
The code is further restructured to make the CHAIN handling similar
to SWINC, as the two are now extremely similar in behaviour.
Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20221113163832.3154370-3-maz@kernel.org
|
|
Align the ID_DFR0_EL1.PerfMon values with ID_AA64DFR0_EL1.PMUver.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-2-maz@kernel.org
|
|
In mark_page_dirty_in_slot(), we bail out when no running vcpu exists
and a running vcpu context is strictly required by architecture. It may
cause backwards compatible issue. Currently, saving vgic/its tables is
the only known case where no running vcpu context is expected. We may
have other unknown cases where no running vcpu context exists and it's
reported by the warning message and we bail out without pushing the
dirty information to the backup bitmap. For this, the application is
going to enable the backup bitmap for the unknown cases. However, the
dirty information can't be pushed to the backup bitmap even though the
backup bitmap is enabled for those unknown cases in the application,
until the unknown cases are added to the allowed list of non-running
vcpu context with extra code changes to the host kernel.
In order to make the new application, where the backup bitmap has been
enabled, to work with the unchanged host, we continue to push the dirty
information to the backup bitmap instead of bailing out early. With the
added check on 'memslot->dirty_bitmap' to mark_page_dirty_in_slot(), the
kernel crash is avoided silently by the combined conditions: no running
vcpu context, kvm_arch_allow_write_without_running_vcpu() returns 'true',
and the backup bitmap (KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP) isn't enabled
yet.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221112094322.21911-1-gshan@redhat.com
|
|
As a stepping stone towards deprivileging the host's access to the
guest's vCPU structures, introduce some naive flush/sync routines to
copy most of the host vCPU into the hyp vCPU on vCPU run and back
again on return to EL1.
This allows us to run using the pKVM hyp structures when KVM is
initialised in protected mode.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Co-developed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-27-will@kernel.org
|
|
We no longer need to map the host's '.rodata' and '.bss' sections in the
stage-1 page-table of the pKVM hypervisor at EL2, so remove those
mappings and avoid creating any future dependencies at EL2 on
host-controlled data structures.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-25-will@kernel.org
|
|
The pkvm hypervisor at EL2 may need to read the 'kvm_vgic_global_state'
variable from the host, for example when saving and restoring the state
of the virtual GIC.
Explicitly map 'kvm_vgic_global_state' in the stage-1 page-table of the
pKVM hypervisor rather than relying on mapping all of the host '.rodata'
section.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-24-will@kernel.org
|
|
Sharing 'kvm_arm_vmid_bits' between EL1 and EL2 allows the host to
modify the variable arbitrarily, potentially leading to all sorts of
shenanians as this is used to configure the VTTBR register for the
guest stage-2.
In preparation for unmapping host sections entirely from EL2, maintain
a copy of 'kvm_arm_vmid_bits' in the pKVM hypervisor and initialise it
from the host value while it is still trusted.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-23-will@kernel.org
|
|
When pKVM is enabled, the hypervisor at EL2 does not trust the host at
EL1 and must therefore prevent it from having unrestricted access to
internal hypervisor state.
The 'kvm_arm_hyp_percpu_base' array holds the offsets for hypervisor
per-cpu allocations, so move this this into the nVHE code where it
cannot be modified by the untrusted host at EL1.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-22-will@kernel.org
|
