summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-12-07wifi: mt76: mt7915: fix EEPROM offset of TSSI flag on MT7981StanleyYP Wang1-1/+2
The offset of the TSSI flag on the EEPROM of MT7981 devices was wrong. Set the correct offset instead. Fixes: 6bad146d162e ("wifi: mt76: mt7915: add support for MT7981") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: fix EHT phy mode checkMeiChia Chiu1-1/+1
Add a BSS eht_support check before returning EHT phy mode. Without this patch, there might be an inconsistency where the softmac layer thinks the BSS is in HE mode, while the FW thinks it is in EHT mode. Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: add beacon protection support for mt7996Allen Ye5-42/+153
Implement beacon protection feature for mt7996 chipsets, and also do some cleanup on the set key routine. Co-developed-by: Rudra Shahi <rudra.shahi@mediatek.com> Signed-off-by: Rudra Shahi <rudra.shahi@mediatek.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: rework ampdu params settingPeter Chiu2-44/+16
Add sta_rec_ht_uni struct to pass HT ampdu params to firmware. For VHT, HE, and EHT mode, firmware will get the ampdu params by parsing the corresponding capability. Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: fix alignment of sta info eventStanleyYP Wang1-1/+1
Fix the alignment of struct mt7996_mcu_all_sta_info_event. Fixes: adde3eed4a75 ("wifi: mt76: mt7996: Add mcu commands for getting sta tx statistic") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: switch to mcu command for TX GI reportBenjamin Lin5-46/+74
During runtime, the GI value in the WTBL is not updated in real-time. To obtain the latest results for the TX GI, switch to use an MCU command. Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: use chainmask for power delta calculationAllen Ye3-3/+3
The power gain value is related to total TX path, so change the calculation to use per-phy chainmask. Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add txpower setting supportShayne Chen4-0/+85
Add support for setting txpower from upper layer and configuring per-rate txpower limit table. Co-developed-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: change txpower init to per-phyShayne Chen6-29/+47
Use per-phy structure for maximum txpower value initializing, since each phy may have a different chainmask, which can impact the calculation of power gain. Co-developed-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: fix rate usage of inband discovery framesMeiChia Chiu1-2/+2
For UBPR and FILS frames, the BSS_CHANGED_BEACON flag will also be set, which causes those frames to use the beacon rate in TX descriptors. Adjust the statement to fix this issue. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: align the format of fixed rate commandPeter Chiu2-8/+75
Use the new fixed rate command format to let the fixed field function work normally. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: handle IEEE80211_RC_SMPS_CHANGEDPeter Chiu3-4/+10
Make mt7996_mcu_set_fixed_field() non-static in order to handle IEEE80211_RC_SMPS_CHANGED in mt7996_mac_sta_rc_work(). Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: set fixed_bw bit in TX descriptor for fixed rate framesHoward Hsu2-2/+4
Always set the fixed_bw bitfield for fixed rate frames to keep it being sent with specific bandwidth. Without this change, the bw of fixed rate frames will still be decided by hardware. Reported-by: Chank Chen <chank.chen@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: adjust WFDMA settings to improve performancePeter Chiu2-21/+58
Refactor and update dma prefetch parts and also split band 1 traffic to PCIe 1 to enhance throughput. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: fix the size of struct bss_rate_tlvSujuan Chen1-1/+1
Align the format of struct bss_rate_tlv to the firmware. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: add beacon duplicate TX mode support for mt7996StanleyYP Wang7-25/+68
For connac3 chipsets, setting of spe_idx is moved from TX descriptor to the fixed rate table. This patch implements the setting to support duplicate TX mode for beacon. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add thermal sensor device supportHoward Hsu2-0/+130
This patch adds support for thermal sensor device, including the following features: - Support to read current chip temperature. - Support to set/get the trigger/restore temperature for thermal service. - Support to read current chip tx cycle. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: add thermal protection support for mt7996Howard Hsu6-0/+274
Implement thermal protection commands and support Linux cooling device control for mt7996 chipsets. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add TX statistics for EHT mode in debugfsHoward Hsu1-2/+3
Add EHT statistics of beamforming feedback and BW320 in debugfs tx_stats command. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add support for variants with auxiliary RX pathShayne Chen4-5/+35
Add support to correctly configure the rx chainmask of variants that have additional auxiliary RX path. e.g., 4T5R. The auxiliary RX path is transparent to driver, but driver needs to correctly configure it in the set channel fw command. Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7915: fallback to non-wed mode if platform_get_resource fails ↵Lorenzo Bianconi1-1/+1
in mt7915_mmio_wed_init() mt76 assumes mt7915_mmio_wed_init can fail just after wed driver has been attached running mtk_wed_device_attach(). Fall back to non-wed mode if platform_get_resource fails in mt7915_mmio_wed_init routines. Fixes: eebb70976be5 ("wifi: mt76: mt7915: enable wed for mt7986-wmac chipset") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed rro delete session garbage collectorLorenzo Bianconi8-0/+197
Introduce the capability to clear WED rro session configured in the hw according to the event reported by the MCU firmware Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed reset supportLorenzo Bianconi5-9/+114
Introduce the capability to reset mt7996 chipset if requested by wed driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: move wed reset common code in mt76 moduleLorenzo Bianconi6-33/+36
Move WED reset code shared between mt7915 and mt7996 in common module. This is a preliminary patch to introduce WED reset support for mt7996. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed rx supportBo Jiao11-87/+772
Similar to MT7915, enable Wireless Ethernet Ditpatcher for MT7996 to offload traffic received from the WLAN nic and transmitted on the LAN one Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: use u16 for val field in mt7996_mcu_set_rro signatureLorenzo Bianconi2-2/+2
This is a preliminary patch to introduce WED rx support for mt7996 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: dma: introduce __mt76_dma_queue_reset utility routineLorenzo Bianconi1-3/+12
This is a preliminary patch to introduce WED support for mt7996 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed tx supportSujuan Chen10-66/+383
Similar to MT7915, enable Wireless Ethernet Ditpatcher for MT7996 to offload traffic received from the LAN nic and transmitted on the WLAN one Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: increase MT_QFLAG_WED_TYPE sizeLorenzo Bianconi1-2/+2
This is a preliminary patch to introduce WED support for mt7996 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: introduce wed pointer in mt76_queueLorenzo Bianconi13-50/+65
Introduce mtk_wed_device pointer in mt76_queue structure in order to configure WED chip. Get rid of dev parameter in Q_READ and Q_WRITE macros. Introduce wed parameter to the following routine signatures: - mt76_init_queue - mt76_init_tx_queue This is a preliminary patch to introduce WED support for mt7996 since mt7996 runs two separate WED chips. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: introduce mt76_queue_is_wed_tx_free utility routineLorenzo Bianconi3-4/+10
This is a preliminary patch to introduce WED support for mt7996 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: move mt76_net_setup_tc in common codeLorenzo Bianconi3-15/+23
This is a preliminary patch to introduce WED support for mt7996 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: move mt76_mmio_wed_offload_{enable,disable} in common codeLorenzo Bianconi3-27/+26
mt76_mmio_wed_offload_enable and mt76_mmio_wed_offload_disable routines will be reused by mt7996 driver for wed support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mmio: move mt76_mmio_wed_{init,release}_rx_buf in common codeLorenzo Bianconi3-76/+82
Move mt76_mmio_wed_init_rx_buf and mt76_mmio_wed_release_rx_buf routines in common code. This is a preliminary patch to introduce WED support for mt7996 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: Remove unnecessary (void*) conversionsWu Yunchuan7-8/+8
No need cast (void *) to (struct mt7615_phy *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: permit to load precal from NVMEM cell for mt7915Christian Marangi1-1/+6
Permit to load precal from NVMEM cell for mt7915. The NVMEM cell must be named "precal" to be correctly loaded. NVMEM cell must already account the correct offset and be placed after the EEPROM as the function expect the data right from the start. Tested-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: permit to use alternative cell name to eeprom NVMEM loadChristian Marangi2-3/+7
Generilize mt76_get_of_eeprom_from_nvmem to use alternative cell name by passing the cell name as an arg and expose it. Rename it to mt76_get_of_data_from_nvmem to better reflect the now more generic usage. This is to permit driver to load additional cell, like precal cell. Tested-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: make mt76_get_of_eeprom static againChristian Marangi2-5/+3
Since mt76_get_of_eeprom is not used by mt7915 anymore, unexport it and make it static again. Also drop offset arg as it's only supported for MTD and was always set to 0, hardcode the MTD functio instead. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: limit support of precal loading for mt7915 to MTD onlyChristian Marangi3-3/+5
Limit support for precal loading for mt7915 only to MTD. Passing data from DT doesn't support offset and NVMEM require a different cell name and doesn't support offset hence only MTD way is actually supported. Rename mt76_get_of_eeprom_from_mtd to mt76_get_of_data_from_mtd as it is now used for a more generic purpose and export it. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: fix typo in mt76_get_of_eeprom_from_nvmem functionChristian Marangi1-2/+2
Fix typo in mt76_get_of_eeprom_from_nvmem where eeprom was misspelled as epprom. Fixes: 5bef3a406c6e ("wifi: mt76: add support for providing eeprom in nvmem cells") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: fix broken precal loading from MTD for mt7915Christian Marangi1-1/+1
Commit 495184ac91bb ("mt76: mt7915: add support for applying pre-calibration data") was fundamentally broken and never worked. The idea (before NVMEM support) was to expand the MTD function and pass an additional offset. For normal EEPROM load the offset would always be 0. For the purpose of precal loading, an offset was passed that was internally the size of EEPROM, since precal data is right after the EEPROM. Problem is that the offset value passed is never handled and is actually overwrite by offset = be32_to_cpup(list); ret = mtd_read(mtd, offset, len, &retlen, eep); resulting in the passed offset value always ingnored. (and even passing garbage data as precal as the start of the EEPROM is getting read) Fix this by adding to the current offset value, the offset from DT to correctly read the piece of data at the requested location. Cc: stable@vger.kernel.org Fixes: 495184ac91bb ("mt76: mt7915: add support for applying pre-calibration data") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: fix uninitialized variable in parsing txfreeYi-Chia Hsieh1-1/+1
Fix the uninitialized variable warning in mt7996_mac_tx_free. Fixes: 2461599f835e ("wifi: mt76: mt7996: get tx_retries and tx_failed from txfree") Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7921: support 5.9/6GHz channel config in acpiRong Yan4-1/+64
The mtcl table, configured by platform vendor, provides regulatory information for 5.9/6 GHz channels. mt792x should work on corresponding channels supported by mtcl. This patch would parse the settings in mtcl table and apply the result into chip side. Signed-off-by: Rong Yan <rong.yan@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: add ability to explicitly forbid LED registration with DTRyder Lee1-14/+25
Add ability to explicitly forbid LED registration using DT led\status = "disabled". Tested-by: Alexey D. Filimonov <alexey@filimonic.net> Signed-off-by: Alexey D. Filimonov <alexey@filimonic.net> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07Merge tag 'nf-23-12-06' of ↵Jakub Kicinski7-19/+40
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Incorrect nf_defrag registration for bpf link infra, from D. Wythe. 2) Skip inactive elements in pipapo set backend walk to avoid double deactivation, from Florian Westphal. 3) Fix NFT_*_F_PRESENT check with big endian arch, also from Florian. 4) Bail out if number of expressions in NFTA_DYNSET_EXPRESSIONS mismatch stateful expressions in set declaration. 5) Honor family in table lookup by handle. Broken since 4.16. 6) Use sk_callback_lock to protect access to sk->sk_socket in xt_owner. sock_orphan() might zap this pointer, from Phil Sutter. All of these fixes address broken stuff for several releases. * tag 'nf-23-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: xt_owner: Fix for unsafe access of sk->sk_socket netfilter: nf_tables: validate family when identifying table via handle netfilter: nf_tables: bail out on mismatching dynset and set expressions netfilter: nf_tables: fix 'exist' matching on bigendian arches netfilter: nft_set_pipapo: skip inactive elements during set walk netfilter: bpf: fix bad registration on nf_defrag ==================== Link: https://lore.kernel.org/r/20231206180357.959930-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-07io_uring/af_unix: disable sending io_uring over socketsPavel Begunkov2-7/+6
File reference cycles have caused lots of problems for io_uring in the past, and it still doesn't work exactly right and races with unix_stream_read_generic(). The safest fix would be to completely disallow sending io_uring files via sockets via SCM_RIGHT, so there are no possible cycles invloving registered files and thus rendering SCM accounting on the io_uring side unnecessary. Cc: <stable@vger.kernel.org> Fixes: 0091bfc81741b ("io_uring/af_unix: defer registered files gc to io_uring release") Reported-and-suggested-by: Jann Horn <jannh@google.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/c716c88321939156909cfa1bd8b0faaf1c804103.1701868795.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-07Merge tag 'for-netdev' of ↵Jakub Kicinski7-55/+185
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-12-06 We've added 4 non-merge commits during the last 6 day(s) which contain a total of 7 files changed, 185 insertions(+), 55 deletions(-). The main changes are: 1) Fix race found by syzkaller on prog_array_map_poke_run when a BPF program's kallsym symbols were still missing, from Jiri Olsa. 2) Fix BPF verifier's branch offset comparison for BPF_JMP32 | BPF_JA, from Yonghong Song. 3) Fix xsk's poll handling to only set mask on bound xsk sockets, from Yewon Choi. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Add test for early update in prog_array_map_poke_run bpf: Fix prog_array_map_poke_run map poke update xsk: Skip polling event check for unbound socket bpf: Fix a verifier bug due to incorrect branch offset comparison with cpu=v4 ==================== Link: https://lore.kernel.org/r/20231206220528.12093-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-07Merge tag 'nvme-6.7-2023-12-7' of git://git.infradead.org/nvme into block-6.7Jens Axboe10-64/+119
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.7 - Proper nvme ctrl state setting (Keith) - Passthrough command optimization (Keith) - Spectre fix (Nitesh) - Kconfig clarifications (Shin'ichiro) - Frozen state deadlock fix (Bitao) - Power setting quirk (Georg)" * tag 'nvme-6.7-2023-12-7' of git://git.infradead.org/nvme: nvme-pci: Add sleep quirk for Kingston drives nvme: fix deadlock between reset and scan nvme: prevent potential spectre v1 gadget nvme: improve NVME_HOST_AUTH and NVME_TARGET_AUTH config descriptions nvme-ioctl: move capable() admin check to the end nvme: ensure reset state check ordering nvme: introduce helper function to get ctrl state
2023-12-07nvme-pci: Add sleep quirk for Kingston drivesGeorg Gottleuber2-1/+20
Some Kingston NV1 and A2000 are wasting a lot of power on specific TUXEDO platforms in s2idle sleep if 'Simple Suspend' is used. This patch applies a new quirk 'Force No Simple Suspend' to achieve a low power sleep without 'Simple Suspend'. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-07Merge tag 'imx-fixes-6.7' of ↵Arnd Bergmann16-31/+50
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.7: - A MAINTAINERS update to reinstate freescale ARM64 DT directory in i.MX entry. - A series from Alexander Stein to fix #pwm-cells for imx8-ss. - A series from Haibo Chen to fix GPIO node name for i.MX93 and i.MX8ULP. - Add parkmode-disable-ss-quirk for DWC3 on i.MX8MP and i.MX8MQ to fix an issue that the controller may hang when processing transactions under heavy USB traffic from multiple endpoints. - Fix mediamix block power on/off for i.MX93 by correcting the power domain clock to be 'nic_media'. - A couple of Ethernet PHY clock regression fixes for imx6ul-pico and imx6q-skov board. - Fix edma3 power domain for i.MX8QM to fix a panic during startup process. * tag 'imx-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx28-xea: Pass the 'model' property ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry arm64: dts: imx8-apalis: set wifi regulator to always-on ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init arm64: dts: imx8ulp: update gpio node name to align with register address arm64: dts: imx93: update gpio node name to align with register address arm64: dts: imx93: correct mediamix power arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3 ARM: dts: imx6q: skov: fix ethernet clock regression arm64: dt: imx93: tqma9352-mba93xxla: Fix LPUART2 pad config Link: https://lore.kernel.org/r/20231207005202.GF270430@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 09:51:37 +0300