summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-17can: peak_pci: peak_pci_remove(): fix UAFZheyu Ma1-5/+4
When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250 Fixes: e6d9c80b7ca1 ("can: peak_pci: add support of some new PEAK-System PCI cards") Link: https://lore.kernel.org/all/1634192913-15639-1-git-send-email-zheyuma97@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: m_can: fix iomap_read_fifo() and iomap_write_fifo()Aswath Govindraju1-2/+12
The read and writes from the fifo are from a buffer, with various fields and data at predefined offsets. So, they should not be done to the same address(or port) in case of val_count greater than 1. Therefore, fix this by using iowrite32()/ioread32() instead of ioread32_rep()/iowrite32_rep(). Also, the write into FIFO must be performed with an offset from the message ram base address. Therefore, fix the base address to mram_base. Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/20210920123344.2320-1-a-govindraju@ti.com Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: rcar_can: fix suspend/resumeYoshihiro Shimoda1-8/+12
If the driver was not opened, rcar_can_suspend() should not call clk_disable() because the clock was not enabled. Fixes: fd1159318e55 ("can: add Renesas R-Car CAN driver") Link: https://lore.kernel.org/all/20210924075556.223685-1-yoshihiro.shimoda.uh@renesas.com Cc: stable@vger.kernel.org Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Ayumi Nakamichi <ayumi.nakamichi.kf@renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17netfilter: core: Fix clang warnings about unused static inlinesLukas Wunner1-2/+4
Unlike gcc, clang warns about unused static inlines that are not in an include file: net/netfilter/core.c:344:20: error: unused function 'nf_ingress_hook' [-Werror,-Wunused-function] static inline bool nf_ingress_hook(const struct nf_hook_ops *reg, int pf) ^ net/netfilter/core.c:353:20: error: unused function 'nf_egress_hook' [-Werror,-Wunused-function] static inline bool nf_egress_hook(const struct nf_hook_ops *reg, int pf) ^ According to commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"), the proper resolution is to mark the affected functions as __maybe_unused. An alternative approach would be to move them to include/linux/netfilter_netdev.h, but since Pablo didn't do that in commit ddcfa710d40b ("netfilter: add nf_ingress_hook() helper function"), I'm guessing __maybe_unused is preferred. This fixes both the warning introduced by Pablo in v5.10 as well as the one recently introduced by myself with commit 42df6e1d221d ("netfilter: Introduce egress hook"). Fixes: ddcfa710d40b ("netfilter: add nf_ingress_hook() helper function") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-10-17block, bfq: reset last_bfqq_created on group changePaolo Valente1-0/+6
Since commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"), BFQ maintains a per-group pointer to the last bfq_queue created. If such a queue, say bfqq, happens to move to a different group, then bfqq is no more a valid last bfq_queue created for its previous group. That pointer must then be cleared. Not resetting such a pointer may also cause UAF, if bfqq happens to also be freed after being moved to a different group. This commit performs this missing reset. As such it fixes commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"). Such a missing reset is most likely the cause of the crash reported in [1]. With some analysis, we found that this crash was due to the above UAF. And such UAF did go away with this commit applied [1]. Anyway, before this commit, that crash happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq: honor already-setup queue merges""). Yet commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") contains no error related with the above UAF, and can then be restored. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 Fixes: 430a67f9d616 ("block, bfq: merge bursts of newly-created queues") Tested-by: Grzegorz Kowal <custos.mentis@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20211015144336.45894-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-17block: warn when putting the final reference on a registered diskChristoph Hellwig1-0/+1
Warn when the last reference on a live disk is put without calling del_gendisk first. There are some BDI related bug reports that look like a case of this, so make sure we have the proper instrumentation to catch it. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211014130231.1468538-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-17brd: reduce the brd_devices_mutex scopeTetsuo Handa1-22/+22
As with commit 8b52d8be86d72308 ("loop: reorder loop_exit"), unregister_blkdev() needs to be called first in order to avoid calling brd_alloc() from brd_probe() after brd_del_one() from brd_exit(). Then, we can avoid holding global mutex during add_disk()/del_gendisk() as with commit 1c500ad706383f1a ("loop: reduce the loop_ctl_mutex scope"). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/e205f13d-18ff-a49c-0988-7de6ea5ff823@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-17can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()Ziyang Xuan1-15/+31
When isotp_sendmsg() concurrent, tx.state of all TX processes can be ISOTP_IDLE. The conditions so->tx.state != ISOTP_IDLE and wq_has_sleeper(&so->wait) can not protect TX buffer from being accessed by multiple TX processes. We can use cmpxchg() to try to modify tx.state to ISOTP_SENDING firstly. If the modification of the previous process succeed, the later process must wait tx.state to ISOTP_IDLE firstly. Thus, we can ensure TX buffer is accessed by only one process at the same time. And we should also restore the original tx.state at the subsequent error processes. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/c2517874fbdf4188585cf9ddf67a8fa74d5dbde5.1633764159.git.william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: isotp: isotp_sendmsg(): add result check for wait_event_interruptible()Ziyang Xuan1-1/+3
Using wait_event_interruptible() to wait for complete transmission, but do not check the result of wait_event_interruptible() which can be interrupted. It will result in TX buffer has multiple accessors and the later process interferes with the previous process. Following is one of the problems reported by syzbot. ============================================================= WARNING: CPU: 0 PID: 0 at net/can/isotp.c:840 isotp_tx_timer_handler+0x2e0/0x4c0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:isotp_tx_timer_handler+0x2e0/0x4c0 Call Trace: <IRQ> ? isotp_setsockopt+0x390/0x390 __hrtimer_run_queues+0xb8/0x610 hrtimer_run_softirq+0x91/0xd0 ? rcu_read_lock_sched_held+0x4d/0x80 __do_softirq+0xe8/0x553 irq_exit_rcu+0xf8/0x100 sysvec_apic_timer_interrupt+0x9e/0xc0 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 Add result check for wait_event_interruptible() in isotp_sendmsg() to avoid multiple accessers for tx buffer. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/10ca695732c9dd267c76a3c30f37aefe1ff7e32f.1633764159.git.william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Reported-by: syzbot+78bab6958a614b0c80b9@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: j1939: j1939_xtp_rx_rts_session_new(): abort TP less than 9 bytesZhang Changzhong2-0/+3
The receiver should abort TP if 'total message size' in TP.CM_RTS and TP.CM_BAM is less than 9 or greater than 1785 [1], but currently the j1939 stack only checks the upper bound and the receiver will accept the following broadcast message: vcan1 18ECFF00 [8] 20 08 00 02 FF 00 23 01 vcan1 18EBFF00 [8] 01 00 00 00 00 00 00 00 vcan1 18EBFF00 [8] 02 00 FF FF FF FF FF FF This patch adds check for the lower bound and abort illegal TP. [1] SAE-J1939-82 A.3.4 Row 2 and A.3.6 Row 6. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1634203601-3460-1-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: j1939: j1939_xtp_rx_dat_one(): cancel session if receive TP.DT with ↵Zhang Changzhong1-2/+5
error length According to SAE-J1939-21, the data length of TP.DT must be 8 bytes, so cancel session when receive unexpected TP.DT message. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/1632972800-45091-1-git-send-email-zhangchangzhong@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_privZiyang Xuan1-2/+5
It will trigger UAF for rx_kref of j1939_priv as following. cpu0 cpu1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start j1939_priv_set j1939_priv_get_by_ndev_locked j1939_jsk_add ..... j1939_netdev_stop kref_put_lock(&priv->rx_kref, ...) kref_get(&priv->rx_kref, ...) REFCOUNT_WARN("addition on 0;...") ==================================================== refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0 RIP: 0010:refcount_warn_saturate+0x169/0x1e0 Call Trace: j1939_netdev_start+0x68b/0x920 j1939_sk_bind+0x426/0xeb0 ? security_socket_bind+0x83/0xb0 The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to protect. Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/20210926104757.2021540-1-william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Reported-by: syzbot+85d9878b19c94f9019ad@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-17can: j1939: j1939_tp_rxtimer(): fix errant alert in j1939_tp_rxtimerZiyang Xuan1-3/+2
When the session state is J1939_SESSION_DONE, j1939_tp_rxtimer() will give an alert "rx timeout, send abort", but do nothing actually. Move the alert into session active judgment condition, it is more reasonable. One of the scenarios is that j1939_tp_rxtimer() execute followed by j1939_xtp_rx_abort_one(). After j1939_xtp_rx_abort_one(), the session state is J1939_SESSION_DONE, then j1939_tp_rxtimer() give an alert. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/20210906094219.95924-1-william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-10-16Merge tag 'perf-tools-fixes-for-v5.15-2021-10-16' of ↵Linus Torvalds3-8/+9
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix 'perf test evsel' build error on !x86 architectures - Fix libperf's test_stat_cpu mixup of CPU numbers and CPU indexes - Output offsets for decompressed records, not just useless zeros * tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: libperf tests: Fix test_stat_cpu libperf test evsel: Fix build error on !x86 architectures perf report: Output non-zero offset for decompressed records
2021-10-16Merge tag 'fixes-2021-10-16' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fix from Mike Rapoport: "Fix handling of NOMAP regions with kmemleak. NOMAP regions don't have linear map entries so an attempt to scan these areas in kmemleak would fault. Prevent such faults by excluding NOMAP regions from kmemleak" * tag 'fixes-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock: exclude NOMAP regions from kmemleak
2021-10-16Merge tag 'trace-v5.15-rc3' of ↵Linus Torvalds6-14/+117
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Tracing fixes for 5.15: - Fix defined but not use warning/error for osnoise function - Fix memory leak in event probe - Fix memblock leak in bootconfig - Fix the API of event probes to be like kprobes - Added test to check removal of event probe API - Fix recordmcount.pl for nds32 failed build * tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^' selftests/ftrace: Update test for more eprobe removal process tracing: Fix event probe removal from dynamic events tracing: Fix missing * in comment block bootconfig: init: Fix memblock leak in xbc_make_cmdline() tracing: Fix memory leak in eprobe_register() tracing: Fix missing osnoise tracer on max_latency
2021-10-16Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds5-11/+5
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver fixes from Stephen Boyd: "Clk driver fixes for critical issues found in the past few weeks: - Select gdsc config so qcom sm6350 driver probes - Fix a register offset in qcom gcc-sm6115 so the correct clk is controlled - Fix inverted logic in Renesas RZ/G2L .is_enabled() - Mark some more clks critical in Renesas clk driver - Remove a duplicate clk in the agilex driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: add select QCOM_GDSC for SM6350 clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc clk: socfpga: agilex: fix duplicate s2f_user0_clk clk: renesas: rzg2l: Fix clk status function clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical
2021-10-16Merge tag 'for-5.15/dm-fixes' of ↵Linus Torvalds4-11/+31
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM verity target to skip redundant processing on I/O errors. - Fix request-based DM so that it doesn't queue request to blk-mq when DM device is suspended. - Fix DM core mempool NULL pointer race when completing IO. - Make DM clone target's 'descs' array static. * tag 'for-5.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix mempool NULL pointer race when completing IO dm rq: don't queue request to blk-mq during DM suspend dm clone: make array 'descs' static dm verity: skip redundant verity_handle_err() on I/O errors
2021-10-16Merge tag 's390-5.15-6' of ↵Linus Torvalds2-10/+8
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Maintainers and reviewers changes: * Cornelia decided to free up her time and step down from vfio-ccw maintainer and s390 kvm reviewer duties * Add Alexander Gordeev as s390 arch code reviewer - Fix broken strrchr implementation * tag 's390-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: add Alexander Gordeev as reviewer s390: fix strrchr() implementation vfio-ccw: step down as maintainer KVM: s390: remove myself as reviewer
2021-10-16Merge tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linuxLinus Torvalds4-3/+8
Pull csky fixes from Guo Ren: "Only 5 fixups: - Make HAVE_TCM depend on !COMPILE_TEST - bitops: Remove duplicate __clear_bit define - Select ARCH_WANT_FRAME_POINTERS only if compiler supports it - Fixup regs.sr broken in ptrace - don't let sigreturn play with priveleged bits of status register" * tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linux: csky: Make HAVE_TCM depend on !COMPILE_TEST csky: bitops: Remove duplicate __clear_bit define csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports it csky: Fixup regs.sr broken in ptrace csky: don't let sigreturn play with priveleged bits of status register
2021-10-16Merge tag 'arc-5.15-rc6' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fix from Vineet Gupta: "Small fixlet for ARC" * tag 'arc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: fix potential build snafu
2021-10-16Merge tag 'arm-soc-fixes-5.15-2' of ↵Linus Torvalds10-25/+98
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A small number fixes this time, mostly touching actual code: - Add platform device for i.MX System Reset Controller (SRC) to fix a regression caused by fw_devlink change - A fixup for a boot regression caused by my own rework for the Qualcomm SCM driver - Multiple bugfixes for the Arm FFA and optee firmware drivers, addressing problems when they are built as a loadable module - Four dts bugfixes for the Broadcom SoC used in Raspberry pi, addressing VEC (video encoder), MDIO bus controller #address-cells/#size-cells, SDIO voltage and PCIe host bridge dtc warnings" * tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx: register reset controller from a platform driver iommu/arm: fix ARM_SMMU_QCOM compilation ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting tee: optee: Fix missing devices unregister during optee_remove ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states ARM: dts: bcm2711: fix MDIO #address- and #size-cells ARM: dts: bcm283x: Fix VEC address for BCM2711 firmware: arm_ffa: Fix __ffa_devices_unregister firmware: arm_ffa: Add missing remove callback to ffa_bus_type
2021-10-16Merge tag 'pci-v5.15-fixes-2' of ↵Linus Torvalds1-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: - Don't save msi_populate_sysfs() error code as dev->msi_irq_groups so we don't dereference the error code as a pointer (Wang Hai) * tag 'pci-v5.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/MSI: Handle msi_populate_sysfs() errors correctly
2021-10-16Merge tag 'acpi-5.15-rc6' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Add a missing device ID to a quirk list in the suspend-to-idle support code" * tag 'acpi-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Include alternate AMDI0005 id in special behaviour
2021-10-16net: bridge: mcast: use multicast_membership_interval for IGMPv3Nikolay Aleksandrov1-3/+1
When I added IGMPv3 support I decided to follow the RFC for computing the GMI dynamically: " 8.4. Group Membership Interval The Group Membership Interval is the amount of time that must pass before a multicast router decides there are no more members of a group or a particular source on a network. This value MUST be ((the Robustness Variable) times (the Query Interval)) plus (one Query Response Interval)." But that actually is inconsistent with how the bridge used to compute it for IGMPv2, where it was user-configurable that has a correct default value but it is up to user-space to maintain it. This would make it consistent with the other timer values which are also maintained correct by the user instead of being dynamically computed. It also changes back to the previous user-expected GMI behaviour for IGMPv3 queries which were supported before IGMPv3 was added. Note that to properly compute it dynamically we would need to add support for "Robustness Variable" which is currently missing. Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: 0436862e417e ("net: bridge: mcast: support for IGMPv3/MLDv2 ALLOW_NEW_SOURCES report") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net: make use of helper netif_is_bridge_master()Kyungrok Chung9-14/+14
Make use of netdev helper functions to improve code readability. Replace 'dev->priv_flags & IFF_EBRIDGE' with netif_is_bridge_master(dev). Signed-off-by: Kyungrok Chung <acadx0@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16Merge branch 'smc-rv23'David S. Miller14-383/+1607
Karsten Graul says: ==================== net/smc: introduce SMC-Rv2 support Please apply the following patch series for smc to netdev's net-next tree. SMC-Rv2 support (see https://www.ibm.com/support/pages/node/6326337) provides routable RoCE support for SMC-R, eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of the RoCE adapter hardware. v2: resend of the v1 patch series, and CC linux-rdma this time v3: rebase after net tree was merged into net-next ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net/smc: stop links when their GID is removedKarsten Graul1-0/+53
With SMC-Rv2 the GID is an IP address that can be deleted from the device. When an IB_EVENT_GID_CHANGE event is provided then iterate over all active links and check if their GID is still defined. Otherwise stop the affected link. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net/smc: add netlink support for SMC-Rv2Karsten Graul2-27/+88
Implement the netlink support for SMC-Rv2 related attributes that are provided to user space. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net/smc: extend LLC layer for SMC-Rv2Karsten Graul7-115/+531
Add support for large v2 LLC control messages in smc_llc.c. The new large work request buffer allows to combine control messages into one packet that had to be spread over several packets before. Add handling of the new v2 LLC messages. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net/smc: add v2 support to the work request layerKarsten Graul5-21/+199
In the work request layer define one large v2 buffer for each link group that is used to transmit and receive large LLC control messages. Add the completion queue handling for this buffer. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net/smc: retrieve v2 gid from IB deviceKarsten Graul4-30/+95
In smc_ib.c, scan for RoCE devices that support UDP encapsulation. Find an eligible device and check that there is a route to the remote peer. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net/smc: add v2 format of CLC decline messageKarsten Graul2-10/+55
The CLC decline message changed with SMC-Rv2 and supports up to 4 additional diagnosis codes. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net/smc: add listen processing for SMC-Rv2Karsten Graul4-66/+165
Implement the server side of the SMC-Rv2 processing. Process incoming CLC messages, find eligible devices and check for a valid route to the remote peer. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net/smc: add SMC-Rv2 connection establishmentKarsten Graul6-61/+267
Send a CLC proposal message, and the remote side process this type of message and determine the target GID. Check for a valid route to this GID, and complete the connection establishment. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net/smc: prepare for SMC-Rv2 connectionKarsten Graul4-35/+113
Prepare the connection establishment with SMC-Rv2. Detect eligible RoCE cards and indicate all supported SMC modes for the connection. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net/smc: save stack space and allocate smc_init_infoKarsten Graul1-30/+53
The struct smc_init_info grew over time, its time to save space on stack and allocate this struct dynamically. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16x86/fpu: Mask out the invalid MXCSR bits properlyBorislav Petkov1-1/+1
This is a fix for the fix (yeah, /facepalm). The correct mask to use is not the negation of the MXCSR_MASK but the actual mask which contains the supported bits in the MXCSR register. Reported and debugged by Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: d298b03506d3 ("x86/fpu: Restore the masking out of reserved MXCSR bits") Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ser Olmy <ser.olmy@protonmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/YWgYIYXLriayyezv@intel.com
2021-10-16net: stream: don't purge sk_error_queue in sk_stream_kill_queues()Jakub Kicinski1-3/+0
sk_stream_kill_queues() can be called on close when there are still outstanding skbs to transmit. Those skbs may try to queue notifications to the error queue (e.g. timestamps). If sk_stream_kill_queues() purges the queue without taking its lock the queue may get corrupted, and skbs leaked. This shows up as a warning about an rmem leak: WARNING: CPU: 24 PID: 0 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x... The leak is always a multiple of 0x300 bytes (the value is in %rax on my builds, so RAX: 0000000000000300). 0x300 is truesize of an empty sk_buff. Indeed if we dump the socket state at the time of the warning the sk_error_queue is often (but not always) corrupted. The ->next pointer points back at the list head, but not the ->prev pointer. Indeed we can find the leaked skb by scanning the kernel memory for something that looks like an skb with ->sk = socket in question, and ->truesize = 0x300. The contents of ->cb[] of the skb confirms the suspicion that it is indeed a timestamp notification (as generated in __skb_complete_tx_timestamp()). Removing purging of sk_error_queue should be okay, since inet_sock_destruct() does it again once all socket refs are gone. Eric suggests this may cause sockets that go thru disconnect() to maintain notifications from the previous incarnations of the socket, but that should be okay since the race was there anyway, and disconnect() is not exactly dependable. Thanks to Jonathan Lemon and Omar Sandoval for help at various stages of tracing the issue. Fixes: cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16Merge branch 'dev_addr-conversions-part-1'David S. Miller15-46/+69
Jakub Kicinski says: ==================== ethernet: manual netdev->dev_addr conversions (part 1) Manual conversions of drivers writing directly to netdev->dev_addr (part 1 out of 3). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: ixgb: use eth_hw_addr_set()Jakub Kicinski1-2/+6
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). ixgb_get_ee_mac_addr() is used with a non-nevdev->dev_addr pointer so we can't deal with the problem inside it. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: ibmveth: use ether_addr_to_u64()Jakub Kicinski1-14/+3
We'll want to make netdev->dev_addr const, remove the local helper which is missing a const qualifier on the argument and use ether_addr_to_u64(). Similar story to mlx4. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: enetc: use eth_hw_addr_set()Jakub Kicinski3-3/+7
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Pass a netdev into the helper instead of just the address, read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: ec_bhf: use eth_hw_addr_set()Jakub Kicinski1-1/+3
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Copy the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: enic: use eth_hw_addr_set()Jakub Kicinski1-2/+3
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Use a zero'ed array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: bcmgenet: use eth_hw_addr_set()Jakub Kicinski1-2/+6
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: bnx2x: use eth_hw_addr_set()Jakub Kicinski1-5/+11
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: aquantia: use eth_hw_addr_set()Jakub Kicinski1-2/+4
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Use an array on the stack, then call eth_hw_addr_set(). eth_hw_addr_set() is after error checking, this should be fine, error propagates all the way to failing probe. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: amd: use eth_hw_addr_set()Jakub Kicinski2-5/+12
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: alteon: use eth_hw_addr_set()Jakub Kicinski1-6/+8
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Break the address apart into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 02:18:22 +0300