| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Log and handle twp new AMD-specific MCA registers: SYND1 and SYND2
and report the Field Replaceable Unit text info reported through them
- Add support for handling variable-sized SMCA BERT records
- Add the capability for reporting vendor-specific RAS error info
without adding vendor-specific fields to struct mce
- Cleanups
* tag 'ras_core_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/mce_amd: Add support for FRU text in MCA
x86/mce/apei: Handle variable SMCA BERT record size
x86/MCE/AMD: Add support for new MCA_SYND{1,2} registers
tracing: Add __print_dynamic_array() helper
x86/mce: Add wrapper for struct mce to export vendor specific info
x86/mce/intel: Use MCG_BANKCNT_MASK instead of 0xff
x86/mce/mcelog: Use xchg() to get and clear the flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for Bluefield-2 SOCs to bluefield_edac
- Add support for Intel Panther Lake-H to igen6_edac
- Add polling support to igen6_edac as some Intel M100 chips have
trouble with error interrupts
- Add Kaby Lake-S support to ie31200_edac
- Fix memory source detection in the SKX common module which is used by
a couple of Intel EDAC drivers
- Add support for the NXP i.MX9 memory controller to fsl_edac
- The usual fixes and cleanups all over the place
* tag 'edac_updates_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Add polling support
EDAC/igen6: Initialize edac_op_state according to the configuration data
EDAC/igen6: Avoid segmentation fault on module unload
EDAC/ie31200: Add Kaby Lake-S dual-core host bridge ID
MAINTAINERS: Change FSL DDR EDAC maintainership
EDAC/{skx_common,i10nm}: Fix incorrect far-memory error source indicator
EDAC/skx_common: Differentiate memory error sources
EDAC/fsl_ddr: Add support for i.MX9 DDR controller
dt-bindings: memory: fsl: Add compatible string nxp,imx9-memory-controller
EDAC/fsl_ddr: Fix bad bit shift operations
EDAC/fsl_ddr: Move global variables into struct fsl_mc_pdata
EDAC/fsl_ddr: Pass down fsl_mc_pdata in ddr_in32() and ddr_out32()
RAS/AMD/ATL: Add debug prints for DF register reads
EDAC/bluefield: Use Arm SMC for EMI access on BlueField-2
EDAC/bluefield: Fix potential integer overflow
EDAC/igen6: Add Intel Panther Lake-H SoCs support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/melver/linux
Pull Kernel Concurrency Sanitizer (KCSAN) updates from Marco Elver:
- Make KCSAN compatible with PREEMPT_RT
- Minor cleanup
* tag 'kcsan-20241112-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/melver/linux:
kcsan: Remove redundant call of kallsyms_lookup_name()
kcsan: Turn report_filterlist_lock into a raw_spinlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Introduction of the new SRCU-lite flavour with a new pair of
srcu_read_[un]lock_lite() APIs. In practice the read side using
this flavour becomes lighter by removing a full memory barrier on
LOCK and a full memory barrier on UNLOCK. This comes at the expense
of a higher latency write side with two (in the best case of a
snaphot of unused read-sides) or more RCU grace periods on the
update side which now assumes by itself the whole full ordering
guarantee against the LOCK/UNLOCK counters on both indexes, along
with the accesses performed inside.
Uretprobes is a known potential user.
Note this doesn't replace the default normal flavour of SRCU which
still behaves the same as usual.
- Add testing of SRCU-lite through rcutorture and rcuscale
- Various cleanups on the way.
Fixes:
- Allow short-circuiting RCU-TASKS-RUDE grace periods on
architectures that have sane noinstr boundaries forbidding tracing
on low-level idle and kernel entry code. RCU-TASKS is enough on
such configurations because it involves an RCU grace period that
waits for all idle tasks to either schedule out voluntarily or
enter into RCU unwatched noinstr code.
- Allow and test start_poll_synchronize_rcu() with IRQs disabled.
- Mention rcuog kthreads in relevant documentation and Kconfig help
- Various fixes and consolidations
rcutorture:
- Add --no-affinity on tools to leave the affinity setting of guests
up to the user.
- Add guest_os_delay parameter to rcuscale for better warm-up
control.
- Fix and improve some rcuscale error handling.
- Various cleanups and fixes
stall:
- Remove dead code
- Stop dumping tasks if a stalled grace period eventually ended
midway as that only produces confusing output.
- Optimize detection of stalling CPUs and avoid useless node locking
otherwise.
NOCB:
- Fix rcu_barrier() hang due to a race against callbacks
deoffloading. This is not yet used, except by rcutorture, and waits
for its promised cpusets interface.
- Remove leftover function declaration"
* tag 'rcu.release.v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (42 commits)
rcuscale: Remove redundant WARN_ON_ONCE() splat
rcuscale: Do a proper cleanup if kfree_scale_init() fails
srcu: Unconditionally record srcu_read_lock_lite() in ->srcu_reader_flavor
srcu: Check for srcu_read_lock_lite() across all CPUs
srcu: Remove smp_mb() from srcu_read_unlock_lite()
rcutorture: Avoid printing cpu=-1 for no-fault RCU boost failure
rcuscale: Add guest_os_delay module parameter
refscale: Correct affinity check
torture: Add --no-affinity parameter to kvm.sh
rcu/nocb: Fix missed RCU barrier on deoffloading
rcu/kvfree: Fix data-race in __mod_timer / kvfree_call_rcu
rcu/srcutiny: don't return before reenabling preemption
rcu-tasks: Remove open-coded one-byte cmpxchg() emulation
doc: Remove kernel-parameters.txt entry for rcutorture.read_exit
rcutorture: Test start-poll primitives with interrupts disabled
rcu: Permit start_poll_synchronize_rcu*() with interrupts disabled
rcu: Allow short-circuiting of synchronize_rcu_tasks_rude()
doc: Add rcuog kthreads to kernel-per-CPU-kthreads.rst
rcu: Add rcuog kthreads to RCU_NOCB_CPU help text
rcu: Use the BITS_PER_LONG macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hmon updates from Guenter Roeck:
"New drivers:
- ISL28022 power monitor
- Nuvoton NCT7363Y
Added support for new chips to existing drivers:
- The tmp180 driver now supports NXP p3t1085, including its I3C mode
- The ina2xx driver now supports SY24655 and INA260
- The amc6821 driver now supports tsd,mule
Other notable improvements:
- The sht4x driver now supports the chip heater
- The pmbus/isl68137 driver now supports a voltage divider on Vout
- The cros_ec driver registers with the thermal framework
- The pmbus/ltc2978 driver now supports LTC7841
- The PMBus core now allow drivers to override WRITE_PROTECT
Various other minor improvements and cleanups"
* tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (51 commits)
hwmon: (pmbus/isl68137) add support for voltage divider on Vout
dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
hwmon: tmp108: fix I3C dependency
hwmon: (cros_ec) register thermal sensors to thermal framework
hwmon: (tmp108) Add support for I3C device
hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support
hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method
hwmon: (nct6775-core) Fix overflows seen when writing limit attributes
hwmon: (pwm-fan) Introduce start from stopped state handling
dt-bindings: hwmon: pwm-fan: Document start from stopped state properties
hwmon: (tmp108) Add NXP p3t1085 support
dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string
hwmon: (sch5627, max31827) Fix typos in driver documentation
hwmon: (jc42) Drop of_match_ptr() protection
hwmon: (f71882fg) Fix grammar in fan speed trip points explanation
dt-bindings: hwmon: pmbus: add ti tps25990 support
hwmon: (pmbus/core) clear faults after setting smbalert mask
hwmon: (pmbus/core) allow drivers to override WRITE_PROTECT
hwmon: (pmbus) add documentation for existing flags
hwmon: (ina226) Add support for SY24655
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include a couple of fixes, a new ACPI backlight quirk for Apple
MacbookPro11,2 and Air7,2 and a bunch of cleanups:
- Fix _CPC register setting issue for registers located in memory in
the ACPI CPPC library code (Lifeng Zheng)
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it
use devm_ for initializing mutexes and allocating driver data, and
make it check the register_pm_notifier() return value (Thomas
Weißschuh, Andy Shevchenko)
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann)
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King)
- Rearrange the processor_perflib code in the ACPI processor driver
to avoid compiling x86-specific code on other architectures (Arnd
Bergmann)
- Add adev NULL check to acpi_quirk_skip_serdev_enumeration() and
make UART skip quirks work on PCI UARTs without an UID (Hans de
Goede)
- Force native backlight handling Apple MacbookPro11,2 and Air7,2 in
the ACPI video driver (Jonathan Denose)
- Switch several ACPI platform drivers back to using struct
platform_driver::remove() (Uwe Kleine-König)
- Replace strcpy() with strscpy() in multiple places in the ACPI
subsystem (Muhammad Qasim Abdul Majeed, Abdul Rahim)"
* tag 'acpi-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
ACPI: video: force native for Apple MacbookPro11,2 and Air7,2
ACPI: CPPC: Fix _CPC register setting issue
ACPI: Switch back to struct platform_driver::remove()
ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration()
ACPI: x86: Make UART skip quirks work on PCI UARTs without an UID
ACPI: allow building without CONFIG_HAS_IOPORT
ACPI: processor_perflib: extend X86 dependency
ACPI: scan: Use strscpy() instead of strcpy()
ACPI: SBSHC: Use strscpy() instead of strcpy()
ACPI: SBS: Use strscpy() instead of strcpy()
ACPI: power: Use strscpy() instead of strcpy()
ACPI: pci_root: Use strscpy() instead of strcpy()
ACPI: pci_link: Use strscpy() instead of strcpy()
ACPI: event: Use strscpy() instead of strcpy()
ACPI: EC: Use strscpy() instead of strcpy()
ACPI: APD: Use strscpy() instead of strcpy()
ACPI: thermal: Use strscpy() instead of strcpy()
ACPI: battery: Check for error code from devm_mutex_init() call
ACPI: EC: make EC support compile-time conditional
ACPI: pfr_telemetry: remove redundant error check on ret
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These are thermal core changes, including the addition of support for
temperature thresholds that can be set from user space, fixes related
to thermal zone initialization, suspend/resume and exit, locking
rework and rearrangement of the code handling thermal zone temperature
updates.
Specifics:
- Add support for thermal thresholds that can be added and removed
from user space via netlink along with a related library update
(Daniel Lezcano)
- Fix thermal zone initialization, suspend/resume and exit
synchronization issues (Rafael Wysocki)
- Rearrange locking in the thermal core to use guards (Rafael
Wysocki)
- Make the code handling thermal zone temperature updates use sorted
lists of trip points to reduce the number of trip points table
walks in the thermal core (Rafael Wysocki)
- Fix and clean up the thermal testing facility code (Rafael Wysocki)
- Fix a Power Allocator thermal governor issue (ZhengShaobo)"
* tag 'thermal-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (45 commits)
thermal: testing: Initialize some variables annoteded with _free()
thermal: testing: Use DEFINE_FREE() and __free() to simplify code
thermal: testing: Simplify tt_get_tt_zone()
thermal: gov_power_allocator: Granted power set to max when nobody request power
thermal: core: Relocate thermal zone initialization routine
thermal: core: Use trip lists for trip crossing detection
thermal: core: Eliminate thermal_zone_trip_down()
thermal: core: Relocate functions that update trip points
thermal: core: Move some trip processing to thermal_trip_crossed()
thermal: core: Pass trip descriptor to thermal_trip_crossed()
thermal: core: Rearrange __thermal_zone_device_update()
thermal: core: Prepare for moving trips between sorted lists
thermal: core: Rename trip list node in struct thermal_trip_desc
thermal: core: Build sorted lists instead of sorting them later
thermal/lib: Fix memory leak on error in thermal_genl_auto()
thermal: thresholds: Fix thermal lock annotation issue
tools/thermal/thermal-engine: Take into account the thresholds API
tools/lib/thermal: Add the threshold netlink ABI
tools/lib/thermal: Make more generic the command encoding function
thermal: netlink: Add the commands and the events for the thresholds
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The amd-pstate cpufreq driver gets the majority of changes this time.
They are mostly fixes and cleanups, but one of them causes it to
become the default cpufreq driver on some AMD server platforms.
Apart from that, the menu cpuidle governor is modified to not use
iowait any more, the intel_idle gets a custom C-states table for
Granite Rapids Xeon D, and the intel_pstate driver will use a more
aggressive Balance- performance default EPP value on Granite Rapids
now.
There are also some fixes, cleanups and tooling updates.
Specifics:
- Update the amd-pstate driver to set the initial scaling frequency
policy lower bound to be the lowest non-linear frequency (Dhananjay
Ugwekar)
- Enable amd-pstate by default on servers starting with newer AMD
Epyc processors (Swapnil Sapkal)
- Align more codepaths between shared memory and MSR designs in
amd-pstate (Dhananjay Ugwekar)
- Clean up amd-pstate code to rename functions and remove redundant
calls (Dhananjay Ugwekar, Mario Limonciello)
- Do other assorted fixes and cleanups in amd-pstate (Dhananjay
Ugwekar and Mario Limonciello)
- Change the Balance-performance EPP value for Granite Rapids in the
intel_pstate driver to a more performance-biased one (Srinivas
Pandruvada)
- Simplify MSR read on the boot CPU in the ACPI cpufreq driver (Chang
S. Bae)
- Ensure sugov_eas_rebuild_sd() is always called when sugov_init()
succeeds to always enforce sched domains rebuild in case EAS needs
to be enabled (Christian Loehle)
- Switch cpufreq back to platform_driver::remove() (Uwe Kleine-König)
- Use proper frequency unit names in cpufreq (Marcin Juszkiewicz)
- Add a built-in idle states table for Granite Rapids Xeon D to the
intel_idle driver (Artem Bityutskiy)
- Fix some typos in comments in the cpuidle core and drivers (Shen
Lichuan)
- Remove iowait influence from the menu cpuidle governor (Christian
Loehle)
- Add min/max available performance state limits to the Energy Model
management code (Lukasz Luba)
- Update pm-graph to v5.13 (Todd Brandt)
- Add documentation for some recently introduced cpupower utility
options (Tor Vic)
- Make cpupower inform users where cpufreq-bench.conf should be
located when opening it fails (Peng Fan)
- Allow overriding cross-compiling env params in cpupower (Peng Fan)
- Add compile_commands.json to .gitignore in cpupower (John B. Wyatt
IV)
- Improve disable c_state block in cpupower bindings and add a test
to confirm that CPU state is disabled to it (John B. Wyatt IV)
- Add Chinese Simplified translation to cpupower (Kieran Moy)
- Add checks for xgettext and msgfmt to cpupower (Siddharth Menon)"
* tag 'pm-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
cpufreq: intel_pstate: Update Balance-performance EPP for Granite Rapids
cpufreq: ACPI: Simplify MSR read on the boot CPU
sched/cpufreq: Ensure sd is rebuilt for EAS check
intel_idle: add Granite Rapids Xeon D support
PM: EM: Add min/max available performance state limits
cpufreq/amd-pstate: Move registration after static function call update
cpufreq/amd-pstate: Push adjust_perf vfunc init into cpu_init
cpufreq/amd-pstate: Align offline flow of shared memory and MSR based systems
cpufreq/amd-pstate: Call cppc_set_epp_perf in the reenable function
cpufreq/amd-pstate: Do not attempt to clear MSR_AMD_CPPC_ENABLE
cpufreq/amd-pstate: Rename functions that enable CPPC
cpufreq/amd-pstate-ut: Add fix for min freq unit test
amd-pstate: Switch to amd-pstate by default on some Server platforms
amd-pstate: Set min_perf to nominal_perf for active mode performance gov
cpufreq/amd-pstate: Remove the redundant amd_pstate_set_driver() call
cpufreq/amd-pstate: Remove the switch case in amd_pstate_init()
cpufreq/amd-pstate: Call amd_pstate_set_driver() in amd_pstate_register_driver()
cpufreq/amd-pstate: Call amd_pstate_register() in amd_pstate_init()
cpufreq/amd-pstate: Set the initial min_freq to lowest_nonlinear_freq
cpufreq/amd-pstate: Remove the redundant verify() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This contains a single series from Uros to replace uses of
<linux/random.h> with prandom.h or other more specific headers
as needed, in order to avoid a circular header issue.
Uros' goal is to be able to use percpu.h from prandom.h, which
will then allow him to define __percpu in percpu.h rather than
in compiler_types.h"
* tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: Include <linux/percpu.h> in <linux/prandom.h>
random: Do not include <linux/prandom.h> in <linux/random.h>
netem: Include <linux/prandom.h> in sch_netem.c
lib/test_scanf: Include <linux/prandom.h> instead of <linux/random.h>
lib/test_parman: Include <linux/prandom.h> instead of <linux/random.h>
bpf/tests: Include <linux/prandom.h> instead of <linux/random.h>
lib/rbtree-test: Include <linux/prandom.h> instead of <linux/random.h>
random32: Include <linux/prandom.h> instead of <linux/random.h>
kunit: string-stream-test: Include <linux/prandom.h>
lib/interval_tree_test.c: Include <linux/prandom.h> instead of <linux/random.h>
bpf: Include <linux/prandom.h> instead of <linux/random.h>
scsi: libfcoe: Include <linux/prandom.h> instead of <linux/random.h>
fscrypt: Include <linux/once.h> in fs/crypto/keyring.c
mtd: tests: Include <linux/prandom.h> instead of <linux/random.h>
media: vivid: Include <linux/prandom.h> in vivid-vid-cap.c
drm/lib: Include <linux/prandom.h> instead of <linux/random.h>
drm/i915/selftests: Include <linux/prandom.h> instead of <linux/random.h>
crypto: testmgr: Include <linux/prandom.h> instead of <linux/random.h>
x86/kaslr: Include <linux/prandom.h> instead of <linux/random.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add sig driver API
- Remove signing/verification from akcipher API
- Move crypto_simd_disabled_for_test to lib/crypto
- Add WARN_ON for return values from driver that indicates memory
corruption
Algorithms:
- Provide crc32-arch and crc32c-arch through Crypto API
- Optimise crc32c code size on x86
- Optimise crct10dif on arm/arm64
- Optimise p10-aes-gcm on powerpc
- Optimise aegis128 on x86
- Output full sample from test interface in jitter RNG
- Retry without padata when it fails in pcrypt
Drivers:
- Add support for Airoha EN7581 TRNG
- Add support for STM32MP25x platforms in stm32
- Enable iproc-r200 RNG driver on BCMBCA
- Add Broadcom BCM74110 RNG driver"
* tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
crypto: aesni - Move back to module_init
crypto: lib/mpi - Export mpi_set_bit
crypto: aes-gcm-p10 - Use the correct bit to test for P10
hwrng: amd - remove reference to removed PPC_MAPLE config
crypto: arm/crct10dif - Implement plain NEON variant
crypto: arm/crct10dif - Macroify PMULL asm code
crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl
crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code
crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply
crypto: arm64/crct10dif - Remove obsolete chunking logic
crypto: bcm - add error check in the ahash_hmac_init function
crypto: caam - add error check to caam_rsa_set_priv_key_form
hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver
dt-bindings: rng: add binding for BCM74110 RNG
padata: Clean up in padata_do_multithreaded()
crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init()
crypto: qat - Fix missing destroy_workqueue in adf_init_aer()
crypto: rsassa-pkcs1 - Reinstate support for legacy protocols
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Do not double register "simple-framebuffer" platform device if
Generic System Framebuffers (sysfb) already did that
- Fix a missing of unregistering platform driver in error handling path
* tag 'chrome-platform-firmware-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: google: Unregister driver_info on failure
firmware: coreboot: Don't register a pdev if screen_info data is present
firmware: sysfb: Add a sysfb_handles_screen_info() helper function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Fixes:
- Fix a leak of fwnode refcount.
Cleanups:
- Drop unused I2C driver data
- Move back from platform_driver::remove_new() to
platform_driver::remove()"
* tag 'chrome-platform-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Switch back to struct platform_driver::remove()
platform/chrome: cros_ec_typec: fix missing fwnode reference decrement
platform/chrome: Drop explicit initialization of struct i2c_device_id::driver_data to 0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull CSD-lock update from Paul McKenney:
"This switches from sched_clock() to ktime_get_mono_fast_ns(), which on
x86 switches from the rdtsc instruction to the rdtscp instruction,
thus avoiding instruction reorderings that cause false-positive
reports of CSD-lock stalls of almost 2^46 nanoseconds. These false
positives are rare, but really are seen in the wild"
* tag 'csd-lock.2024.11.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
locking/csd-lock: Switch from sched_clock() to ktime_get_mono_fast_ns()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull scftorture updates from Paul McKenney:
- Avoid divide operation
- Fix cleanup code waiting for IPI handlers
- Move memory allocations out of preempt-disable region of code for
PREEMPT_RT compatibility
- Use a lockless list to avoid freeing memory while interrupts are
disabled, again for PREEMPT_RT compatibility
- Make lockless list scf_add_to_free_list() correctly handle freeing a
NULL pointer
* tag 'scftorture.2024.11.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
scftorture: Handle NULL argument passed to scf_add_to_free_list().
scftorture: Use a lock-less list to free memory.
scftorture: Move memory allocation outside of preempt_disable region.
scftorture: Wait until scf_cleanup_handler() completes.
scftorture: Avoid additional div operation.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- Fix potential error due to missing #include on s390
- Compatibility with -Wmissing-fallthrough
- Run qemu with more memory during tests
* tag 'nolibc.2024.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests/nolibc: start qemu with 1 GiB of memory
tools/nolibc: compiler: add macro __nolibc_fallthrough
tools/nolibc: s390: include std.h
|
|
Remove "bus_num" property which is both unused in the kernel and
undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241115195049.3637454-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
property
Remove "pl022,slave-tx-disable" property which is both unused in the kernel
and undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20241115193835.3623725-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove "amd,zlib-support" property which is both unused in the kernel and
undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241115193740.3622591-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner fixes for 6.12
- Fix DCDC5 voltage range on Cubieboard 4
* tag 'sunxi-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: cubieboard4: Fix DCDC5 regulator constraints
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a series for booting as a PVH guest, doing some cleanups after the
previous work to make PVH boot code position independent
- a fix of the xenbus driver avoiding a leak in an error case
* tag 'for-linus-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix the issue of resource not being properly released in xenbus_dev_probe()
x86/pvh: Avoid absolute symbol references in .head.text
x86/xen: Avoid relocatable quantities in Xen ELF notes
x86/pvh: Omit needless clearing of phys_base
x86/pvh: Use correct size value in GDT descriptor
x86/pvh: Call C code via the kernel virtual mapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for running Linux in a protected VM under the Arm
Confidential Compute Architecture (CCA)
- Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from
libc
- AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
- Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously
only exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing
the signal handler in line with the x86 behaviour for 6.12
- arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access
control
- Switch back to platform_driver::remove() now that it returns
'void'
- Add some missing events for the CXL PMU driver
- Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
arm64/ptrace: Clarify documentation of VL configuration via ptrace
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Revive SCSI and early console support on MVME147
- Fix early kernel parameters using static keys
- Prevent and improve handling of kernel configurations that lack
specific platform, CPU, or MMU support, to avoid build failures
- Miscellaneous fixes and improvements
- Defconfig updates
* tag 'm68k-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.12-rc1
m68k: mvme147: Reinstate early console
m68k: Make sure NR_IRQS is never zero
m68k: Select M68020 as fallback for classic
m68k: Move Sun 3 into a top-level platform option
m68k: kernel: Use str_read_write() helper function
m68k: Initialize jump labels early during setup_arch()
m68k: mvme147: Fix SCSI controller IRQ numbers
m68k: mvme147: Make mvme147_sched_init() __init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"
* tag 'mips_6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: dts: realtek: Add I2C controllers
mips: dts: realtek: Add syscon-reboot node
MIPS: loongson3_defconfig: Enable blk_dev_nvme by default
MIPS: loongson3_defconfig: Update configs dependencies
MAINTAINERS: Remove linux-mips.org references
MAINTAINERS: Retire Ralf Baechle
TC: Fix the wrong format specifier
MIPS: kernel: proc: Use str_yes_no() helper function
MIPS: mobileye: eyeq6h-epm6: Use eyeq6h in the board device tree
mips: bmips: bcm6358/6368: define required brcm,bmips-cbr-reg
MIPS: Allow using more than 32-bit addresses for reset vectors when possible
mips: asm: fix warning when disabling MIPS_FP_SUPPORT
mips: sgi-ip22: Replace "s[n]?printf" with sysfs_emit in sysfs callbacks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add firmware sysfs interface which allows user space to retrieve the
dump area size of the machine
- Add 'measurement_chars_full' CHPID sysfs attribute to make the
complete associated Channel-Measurements Characteristics Block
available
- Add virtio-mem support
- Move gmap aka KVM page fault handling from the main fault handler to
KVM code. This is the first step to make s390 KVM page fault handling
similar to other architectures. With this first step the main fault
handler does not have any special handling anymore, and therefore
convert it to support LOCK_MM_AND_FIND_VMA
- With gcc 14 s390 support for flag output operand support for inline
assemblies was added. This allows for several optimizations:
- Provide a cmpxchg inline assembly which makes use of this, and
provide all variants of arch_try_cmpxchg() so that the compiler
can generate slightly better code
- Convert a few cmpxchg() loops to try_cmpxchg() loops
- Similar to x86 add a CC_OUT() helper macro (and other macros),
and convert all inline assemblies to make use of them, so that
depending on compiler version better code can be generated
- List installed host-key hashes in sysfs if the machine supports the
Query Ultravisor Keys UVC
- Add 'Retrieve Secret' ioctl which allows user space in protected
execution guests to retrieve previously stored secrets from the
Ultravisor
- Add pkey-uv module which supports the conversion of Ultravisor
retrievable secrets to protected keys
- Extend the existing paes cipher to exploit the full AES-XTS hardware
acceleration introduced with message-security assist extension 10
- Convert hopefully all sysfs show functions to use sysfs_emit() so
that the constant flow of such patches stop
- For PCI devices make use of the newly added Topology ID attribute to
enable whole card multi-function support despite the change to PCHID
per port. Additionally improve the overall robustness and usability
of the multifunction support
- Various other small improvements, fixes, and cleanups
* tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (133 commits)
s390/cio/ioasm: Convert to use flag output macros
s390/cio/qdio: Convert to use flag output macros
s390/sclp: Convert to use flag output macros
s390/dasd: Convert to use flag output macros
s390/boot/physmem: Convert to use flag output macros
s390/pci: Convert to use flag output macros
s390/kvm: Convert to use flag output macros
s390/extmem: Convert to use flag output macros
s390/string: Convert to use flag output macros
s390/diag: Convert to use flag output macros
s390/irq: Convert to use flag output macros
s390/smp: Convert to use flag output macros
s390/uv: Convert to use flag output macros
s390/pai: Convert to use flag output macros
s390/mm: Convert to use flag output macros
s390/cpu_mf: Convert to use flag output macros
s390/cpcmd: Convert to use flag output macros
s390/topology: Convert to use flag output macros
s390/time: Convert to use flag output macros
s390/pageattr: Convert to use flag output macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
"Thirteen patches, all focused on moving away from the current 'secid'
LSM identifier to a richer 'lsm_prop' structure.
This move will help reduce the translation that is necessary in many
LSMs, offering better performance, and make it easier to support
different LSMs in the future"
* tag 'lsm-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: remove lsm_prop scaffolding
netlabel,smack: use lsm_prop for audit data
audit: change context data from secid to lsm_prop
lsm: create new security_cred_getlsmprop LSM hook
audit: use an lsm_prop in audit_names
lsm: use lsm_prop in security_inode_getsecid
lsm: use lsm_prop in security_current_getsecid
audit: update shutdown LSM data
lsm: use lsm_prop in security_ipc_getsecid
audit: maintain an lsm_prop in audit_context
lsm: add lsmprop_to_secctx hook
lsm: use lsm_prop in security_audit_rule_match
lsm: add the lsm_prop data structure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add support for netlink xperms
Some time ago we added the concept of "xperms" to the SELinux policy
so that we could write policy for individual ioctls, this builds upon
this by using extending xperms to netlink so that we can write
SELinux policy for individual netlnk message types and not rely on
the fairly coarse read/write mapping tables we currently have.
There are limitations involving generic netlink due to the
multiplexing that is done, but it's no worse that what we currently
have. As usual, more information can be found in the commit message.
- Deprecate /sys/fs/selinux/user
We removed the only known userspace use of this back in 2020 and now
that several years have elapsed we're starting down the path of
deprecating it in the kernel.
- Cleanup the build under scripts/selinux
A couple of patches to move the genheaders tool under
security/selinux and correct our usage of kernel headers in the tools
located under scripts/selinux. While these changes originated out of
an effort to build Linux on different systems, they are arguably the
right thing to do regardless.
- Minor code cleanups and style fixes
Not much to say here, two minor cleanup patches that came out of the
netlink xperms work
* tag 'selinux-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: Deprecate /sys/fs/selinux/user
selinux: apply clang format to security/selinux/nlmsgtab.c
selinux: streamline selinux_nlmsg_lookup()
selinux: Add netlink xperm support
selinux: move genheaders to security/selinux/
selinux: do not include <linux/*.h> headers from host programs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"The audit patches are minimal this time around with one patch to
correct some kdoc function parameters and one to leverage the
`str_yes_no()` function; nothing very exciting"
* tag 'audit-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: Use str_yes_no() helper function
audit: Reorganize kerneldoc parameter names
|
|
Pull io_uring updates from Jens Axboe:
- Cleanups of the eventfd handling code, making it fully private.
- Support for sending a sync message to another ring, without having a
ring available to send a normal async message.
- Get rid of the separate unlocked hash table, unify everything around
the single locked one.
- Add support for ring resizing. It can be hard to appropriately size
the CQ ring upfront, if the application doesn't know how busy it will
be. This results in applications sizing rings for the most busy case,
which can be wasteful. With ring resizing, they can start small and
grow the ring, if needed.
- Add support for fixed wait regions, rather than needing to copy the
same wait data tons of times for each wait operation.
- Rewrite the resource node handling, which before was serialized per
ring. This caused issues with particularly fixed files, where one
file waiting on IO could hold up putting and freeing of other
unrelated files. Now each node is handled separately. New code is
much simpler too, and was a net 250 line reduction in code.
- Add support for just doing partial buffer clones, rather than always
cloning the entire buffer table.
- Series adding static NAPI support, where a specific NAPI instance is
used rather than having a list of them available that need lookup.
- Add support for mapped regions, and also convert the fixed wait
support mentioned above to that concept. This avoids doing special
mappings for various planned features, and folds the existing
registered wait into that too.
- Add support for hybrid IO polling, which is a variant of strict
IOPOLL but with an initial sleep delay to avoid spinning too early
and wasting resources on devices that aren't necessarily in the < 5
usec category wrt latencies.
- Various cleanups and little fixes.
* tag 'for-6.13/io_uring-20241118' of git://git.kernel.dk/linux: (79 commits)
io_uring/region: fix error codes after failed vmap
io_uring: restore back registered wait arguments
io_uring: add memory region registration
io_uring: introduce concept of memory regions
io_uring: temporarily disable registered waits
io_uring: disable ENTER_EXT_ARG_REG for IOPOLL
io_uring: fortify io_pin_pages with a warning
switch io_msg_ring() to CLASS(fd)
io_uring: fix invalid hybrid polling ctx leaks
io_uring/uring_cmd: fix buffer index retrieval
io_uring/rsrc: add & apply io_req_assign_buf_node()
io_uring/rsrc: remove '->ctx_ptr' of 'struct io_rsrc_node'
io_uring/rsrc: pass 'struct io_ring_ctx' reference to rsrc helpers
io_uring: avoid normal tw intermediate fallback
io_uring/napi: add static napi tracking strategy
io_uring/napi: clean up __io_napi_do_busy_loop
io_uring/napi: Use lock guards
io_uring/napi: improve __io_napi_add
io_uring/napi: fix io_napi_entry RCU accesses
io_uring/napi: protect concurrent io_napi_entry timeout accesses
...
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)
- MD updates via Song:
- Maintainers update
- raid5 sync IO fix
- Enhance handling of faulty and blocked devices
- raid5-ppl atomic improvement
- md-bitmap fix
- Support for manually defining embedded partition tables
- Zone append fixes and cleanups
- Stop sending the queued requests in the plug list to the driver
->queue_rqs() handle in reverse order.
- Zoned write plug cleanups
- Cleanups disk stats tracking and add support for disk stats for
passthrough IO
- Add preparatory support for file system atomic writes
- Add lockdep support for queue freezing. Already found a bunch of
issues, and some fixes for that are in here. More will be coming.
- Fix race between queue stopping/quiescing and IO queueing
- ublk recovery improvements
- Fix ublk mmap for 64k pages
- Various fixes and cleanups
* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
MAINTAINERS: Update git tree for mdraid subsystem
block: make struct rq_list available for !CONFIG_BLOCK
block/genhd: use seq_put_decimal_ull for diskstats decimal values
block: don't reorder requests in blk_mq_add_to_batch
block: don't reorder requests in blk_add_rq_to_plug
block: add a rq_list type
block: remove rq_list_move
virtio_blk: reverse request order in virtio_queue_rqs
nvme-pci: reverse request order in nvme_queue_rqs
btrfs: validate queue limits
block: export blk_validate_limits
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
md/raid5: Increase r5conf.cache_name size
block: remove the ioprio field from struct request
block: remove the write_hint field from struct request
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Fix typos in comments (Yan Zhen)
- Remove unused macro definitions (Damien Le Moal)
- Switch back to the .remove() callback (Uwe Kleine-König)
- Make use of the get_unaligned_be24() helper instead of open coding
(Andy Shevchenko)
- Refactor and cleanup ata_scsi_simulate() command emulation, such that
all commands use ata_scsi_rbuf_fill() with its own callback (Damien
Le Moal)
- Improve ata_scsi_simulate() command emulation by accurately setting
the SCSI command residual (number of bytes not filled) in the command
reply (Damien Le Moal)
- Add missing iommus property in ahci-platform device tree binding
(Frank Wunderlich)
* tag 'ata-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: ahci-platform: add missing iommus property
ata: libata-scsi: Return residual for emulated SCSI commands
ata: libata-scsi: Remove struct ata_scsi_args
ata: libata-scsi: Document all VPD page inquiry actors
ata: libata-scsi: Refactor ata_scsiop_maint_in()
ata: libata-scsi: Refactor ata_scsiop_read_cap()
ata: libata-scsi: Refactor ata_scsi_simulate()
ata: libata-scsi: Refactor scsi_6_lba_len() with use of get_unaligned_be24()
ata: Switch back to struct platform_driver::remove()
ata: libata: Remove unused macro definitions
ata: Fix typos in the comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Changes outside of btrfs: add io_uring command flag to track a dying
task (the rest will go via the block git tree).
User visible changes:
- wire encoded read (ioctl) to io_uring commands, this can be used on
itself, in the future this will allow 'send' to be asynchronous. As
a consequence, the encoded read ioctl can also work in non-blocking
mode
- new ioctl to wait for cleaned subvolumes, no need to use the
generic and root-only SEARCH_TREE ioctl, will be used by "btrfs
subvol sync"
- recognize different paths/symlinks for the same devices and don't
report them during rescanning, this can be observed with LVM or DM
- seeding device use case change, the sprout device (the one
capturing new writes) will not clear the read-only status of the
super block; this prevents accumulating space from deleted
snapshots
Performance improvements:
- reduce lock contention when traversing extent buffers
- reduce extent tree lock contention when searching for inline
backref
- switch from rb-trees to xarray for delayed ref tracking,
improvements due to better cache locality, branching factors and
more compact data structures
- enable extent map shrinker again (prevent memory exhaustion under
some types of IO load), reworked to run in a single worker thread
(there used to be problems causing long stalls under memory
pressure)
Core changes:
- raid-stripe-tree feature updates:
- make device replace and scrub work
- implement partial deletion of stripe extents
- new selftests
- split the config option BTRFS_DEBUG and add EXPERIMENTAL for
features that are experimental or with known problems so we don't
misuse debugging config for that
- subpage mode updates (sector < page):
- update compression implementations
- update writepage, writeback
- continued folio API conversions:
- buffered writes
- make buffered write copy one page at a time, preparatory work for
future integration with large folios, may cause performance drop
- proper locking of root item regarding starting send
- error handling improvements
- code cleanups and refactoring:
- dead code removal
- unused parameter reduction
- lockdep assertions"
* tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (119 commits)
btrfs: send: check for read-only send root under critical section
btrfs: send: check for dead send root under critical section
btrfs: remove check for NULL fs_info at btrfs_folio_end_lock_bitmap()
btrfs: fix warning on PTR_ERR() against NULL device at btrfs_control_ioctl()
btrfs: fix a typo in btrfs_use_zone_append
btrfs: avoid superfluous calls to free_extent_map() in btrfs_encoded_read()
btrfs: simplify logic to decrement snapshot counter at btrfs_mksnapshot()
btrfs: remove hole from struct btrfs_delayed_node
btrfs: update stale comment for struct btrfs_delayed_ref_node::add_list
btrfs: add new ioctl to wait for cleaned subvolumes
btrfs: simplify range tracking in cow_file_range()
btrfs: remove conditional path allocation in btrfs_read_locked_inode()
btrfs: push cleanup into btrfs_read_locked_inode()
io_uring/cmd: let cmds to know about dying task
btrfs: add struct io_btrfs_cmd as type for io_uring_cmd_to_pdu()
btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)
btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()
btrfs: don't sleep in btrfs_encoded_read() if IOCB_NOWAIT is set
btrfs: change btrfs_encoded_read() so that reading of extent is done by caller
btrfs: remove pointless iocb::ki_pos addition in btrfs_encoded_read()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A lot of miscellaneous ext4 bug fixes and cleanups this cycle, most
notably in the journaling code, bufered I/O, and compiler warning
cleanups"
* tag 'ext4_for_linus-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits)
jbd2: Fix comment describing journal_init_common()
ext4: prevent an infinite loop in the lazyinit thread
ext4: use struct_size() to improve ext4_htree_store_dirent()
ext4: annotate struct fname with __counted_by()
jbd2: avoid dozens of -Wflex-array-member-not-at-end warnings
ext4: use str_yes_no() helper function
ext4: prevent delalloc to nodelalloc on remount
jbd2: make b_frozen_data allocation always succeed
ext4: cleanup variable name in ext4_fc_del()
ext4: use string choices helpers
jbd2: remove the 'success' parameter from the jbd2_do_replay() function
jbd2: remove useless 'block_error' variable
jbd2: factor out jbd2_do_replay()
jbd2: refactor JBD2_COMMIT_BLOCK process in do_one_pass()
jbd2: unified release of buffer_head in do_one_pass()
jbd2: remove redundant judgments for check v1 checksum
ext4: use ERR_CAST to return an error-valued pointer
mm: zero range of eof folio exposed by inode size extension
ext4: partial zero eof block on unaligned inode size extension
ext4: disambiguate the return value of ext4_dio_write_end_io()
...
|
|
Pull statx updates from Al Viro:
"Sanitize struct filename and lookup flags handling in statx and
friends"
* tag 'pull-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
libfs: kill empty_dir_getattr()
fs: Simplify getattr interface function checking AT_GETATTR_NOSEC flag
fs/stat.c: switch to CLASS(fd_raw)
kill getname_statx_lookup_flags()
io_statx_prep(): use getname_uflags()
|
|
- improvement of the way hid-bpf coexists with specific drivers (others than
hid-generic) that are already bound to devices (Benjamin Tissoires)
|
|
- removal of three way-too-aggressive BUG_ON()s from HID drivers (He Lugang)
|
|
- assorted cleanups and small code fixes (Dmitry Torokhov, Yan Zhen,
Nathan Chancellor, Andy Shevchenko)
|
|
- support for Corsair Void headset family (Stuart Hayhurst)
|
|
Pull ufs updates from Al Viro:
"ufs cleanups, fixes and folio conversion"
* tag 'pull-ufs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ufs: ufs_sb_private_info: remove unused s_{2,3}apb fields
ufs: Convert ufs_change_blocknr() to take a folio
ufs: Pass a folio to ufs_new_fragments()
ufs: Convert ufs_inode_getfrag() to take a folio
ufs: Convert ufs_extend_tail() to take a folio
ufs: Convert ufs_inode_getblock() to take a folio
ufs: take the handling of free block counters into a helper
clean ufs_trunc_direct() up a bit...
ufs: get rid of ubh_{ubhcpymem,memcpyubh}()
ufs_inode_getfrag(): remove junk comment
ufs_free_fragments(): fix the braino in sanity check
ufs_clusteracct(): switch to passing fragment number
ufs: untangle ubh_...block...(), part 3
ufs: untangle ubh_...block...(), part 2
ufs: untangle ubh_...block...() macros, part 1
ufs: fix ufs_read_cylinder() failure handling
ufs: missing ->splice_write()
ufs: fix handling of delete_entry and set_link failures
|
|
- Support for Goodix GT7986U SPI (Charles Wang)
- assorted code cleanups and fixes (Charles Wang)
|
|
- code cleanup (Uwe Kleine-König)
|
|
- exposing firmware versions for Intel-ISH devices that load
firmware from the host (Zhang Lixu)
- switch to flex-array members (Erick Archer)
|
|
- initial vendor-specific driver for Kysona, currently adding support for
Kysona M600 (Lode Willems)
|
|
- unused variable removal in hidpp_root_get_feature() (Bastien Nocera)
|
|
- code cleanup for mt_set_mode() (Dmitry Torokhov)
|
|
mt_set_mode() accepts 2 boolean switches indicating whether the device
(if it follows Windows Precision Touchpad specification) should report
hardware buttons and/or surface contacts. For a casual reader it is
completely not clear, as they look at the call site, which exact mode
is being requested.
Define report_mode enum and change mt_set_mode() to accept is as
an argument instead. This allows to write:
mt_set_modes(hdev, HID_LATENCY_NORMAL, TOUCHPAD_REPORT_ALL);
or
mt_set_modes(hdev, HID_LATENCY_HIGH, TOUCHPAD_REPORT_BUTTONS);
which makes intent much more clear.
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/Zx_hBvg5Qa3KU3ta@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Pull xattr updates from Al Viro:
"Sanitize xattr and io_uring interactions with it, add *xattrat()
syscalls, sanitize struct filename handling in there"
* tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xattr: remove redundant check on variable err
fs/xattr: add *at family syscalls
new helpers: file_removexattr(), filename_removexattr()
new helpers: file_listxattr(), filename_listxattr()
replace do_getxattr() with saner helpers.
replace do_setxattr() with saner helpers.
new helper: import_xattr_name()
fs: rename struct xattr_ctx to kernel_xattr_ctx
xattr: switch to CLASS(fd)
io_[gs]etxattr_prep(): just use getname()
io_uring: IORING_OP_F[GS]ETXATTR is fine with REQ_F_FIXED_FILE
getname_maybe_null() - the third variant of pathname copy-in
teach filename_lookup() to treat NULL filename as ""
|
|
- bugfixes for Steelseries Arctis 1 battery level handling (Bastien Nocera)
|
|
- Sanitization of BTN_TOOL_RUBBER handling (Jason Gerecke)
|
|
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull ecryptfs updates from Christian Brauner:
"The folio project is about to remove page->index. This contains the
work required for ecryptfs"
* tag 'vfs-6.13.ecryptfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ecryptfs: Pass the folio index to crypt_extent()
ecryptfs: Convert lower_offset_for_page() to take a folio
ecryptfs: Convert ecryptfs_decrypt_page() to take a folio
ecryptfs: Convert ecryptfs_encrypt_page() to take a folio
ecryptfs: Convert ecryptfs_write_lower_page_segment() to take a folio
ecryptfs: Convert ecryptfs_write() to use a folio
ecryptfs: Convert ecryptfs_read_lower_page_segment() to take a folio
ecryptfs: Convert ecryptfs_copy_up_encrypted_with_header() to take a folio
ecryptfs: Use a folio throughout ecryptfs_read_folio()
ecryptfs: Convert ecryptfs_writepage() to ecryptfs_writepages()
|
