| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When multiple planes use the same dma buf, each plane will have its own dma
buf attachment and mapping. It is a waste of IOVA space.
This patch adds a dbuf_duplicated boolean in vb2_plane. If a plane's dbuf
is the same as an existing plane, do not create another attachment and
mapping.
Signed-off-by: Yunke Cao <yunkec@chromium.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This patch prepares for allowing multiple planes to share the same DMA
buffer attachment.
Release the planes from num_planes - 1 to 0 so that we don't leave invalid
mem_priv pointers behind.
Signed-off-by: Yunke Cao <yunkec@chromium.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In the existing implementation, validating planes, checking if the planes
changed, releasing previous planes and reaquiring new planes all happens in
the same for loop.
Split the for loop into 3 parts
1. In the first for loop, validate planes and check if planes changed.
2. Call __vb2_buf_dmabuf_put() to release all planes.
3. In the second for loop, reaquire new planes.
Signed-off-by: Yunke Cao <yunkec@chromium.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Clear vb2_plane's memory related fields in __vb2_plane_dmabuf_put(),
including bytesused, length, fd and data_offset.
Remove the duplicated code in __prepare_dmabuf().
Signed-off-by: Yunke Cao <yunkec@chromium.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Document V4L2_PIX_FMT_MT2110T and V4L2_PIX_FMT_MT2110R. These two
formats are nearly identical, reusing MM21 format and expending it
by inserting chunk of 16 bytes of lower 2 bit pixel data after each
chunk of 64 bytes higher 8 bit of data.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This diagram details the partitioning done in each tiles.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This is a 15 bits per pixel (or packed 10 bit format), so move it
into the relevant section.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The diagram have been pushed back at the end of a list of unrelated
pixels formats. Move it back next its related pixel format.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Properly document the function of the mgb4 output "frame_rate" sysfs
parameter and update the default DV timings values according to the latest
code changes.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Change the default DV timings for the outputs to produce a better signal
less "crippled" by the frame rate limiting. While the individual values
are now different, the resulting signal still matches the same default
display as before.
Additionally fix the corner case when the frame rate limit is set to zero
causing a "divide by zero" kernel panic.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Recent mgb4 firmwares have support for setting a variable framerate
independent of the signal framerate. Add/fix (the mgb4 driver already did
promote V4L2_CAP_TIMEPERFRAME, but it didn't work) support for
V4L2_CAP_TIMEPERFRAME to the driver to enable this feature.
Additionally add support for the DV timings API (VIDIOC_G_DV_TIMINGS,
VIDIOC_ENUM_DV_TIMINGS, ...) for the outputs that was missing. The timings
info is required/used for implementing the V4L2_CAP_TIMEPERFRAME
functionality.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Recent mgb4 firmwares support YUV in addition to the RGB image format.
Enable YUV in the driver when the FW supports it.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Recently the function stfcamss_remove() was changed to not return a
value. Drop the documentation of the return value in the kernel doc.
Fixes: b1f3677aebe5 ("media: staging: media: starfive: camss: Convert to platform remove callback returning void")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The rkisp1-params driver assumes the data buffer format is the only
currently supported "fixed" one. The usage of the "fixed" format is
assumed when allocating memory for the scratch buffers and when
initializing the vb2 queue.
In order to prepare to support the "extensible" format beside the
existing "fixed" one, add support in the driver for both formats by
caching a pointer to the active one in the driver structure and use it
in the vb2 queue operations and subdev pad operations implementations.
Do not yet allow userspace to select between the two formats as the
support for the "extensible" format parsing will be introduced in a later
patch in the series.
While at it, document the un-documented ycbcr_encoding field of
struct rkisp1_params_ops.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ISP parameters buffers are queued by userspace to the params video
device and appended by the driver to the list of available buffers for
later consumption.
As the parameters buffer is mapped in the userspace process memory,
applications have access to the buffer content after the buffer has
been queued.
To prevent userspace from modifying the contents of the parameters buffer
after it has been queued to the video device, add to 'struct
rkisp1_params_buffer' a scratch buffer where to copy the parameters.
Allocate the scratch buffer in the vb2 buf_init() operation and copy the
buffer content in the buf_prepare() operation. Free the scratch
buffer in the newly introduced buf_cleanup() operation handler.
Modify the ISP configuration function to access the ISP configuration
from the cached copy of the parameters buffer instead of using the
userspace-mapped one.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Create the 'struct rkisp1_params_buffer' type that wraps a
vb2_v4l2_buffer to prepare to hold a copy of the parameters buffer that
will be used to cache the user-provided configuration buffer in the
following patches.
Replace usage of 'struct rkisp1_buffer' with 'struct
rkisp1_params_buffer' in rkisp1-params.c to prepare for that.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The rkisp1 driver stores ISP configuration parameters in the fixed
rkisp1_params_cfg structure. As the members of the structure are part of
the userspace API, the structure layout is immutable and cannot be
extended further. Introducing new parameters or modifying the existing
ones would change the buffer layout and cause breakages in existing
applications.
The allow for future extensions to the ISP parameters, introduce a new
extensible parameters format, with a new format 4CC. Document usage of
the new format in the rkisp1 admin guide.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add to the rkisp1-config.h header data types and documentation of
the extensible parameters format.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
- RK3399 has input/output limit of main path 4416 x 3312
- PX30 has input/output limit of main path 3264 x 2448
- i.MX8MP has input/output limit of main path 4096 x 3072
Use rkisp1_info struct to encode the limits.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_event_timeout() causing
patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
wait_for_completion_interruptible_timeout()
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of
wait_for_completion_interruptible_timeout() causing patterns like:
timeout = wait_for_completion_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_for_completion_timeout() causing
patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_event_timeout() causing
patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_event_timeout() causing
patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_event_timeout() causing
patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_for_completion_timeout() causing
patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_for_completion_timeout() causing
patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining, also for the code path using 'tmo' as a variable.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Document FCPVD found in RZ/G2UL SoC. FCPVD block is similar to FCP for
VSP found on RZ/{G2L,G2LC,V2L} SoCs.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Document VSPD found in RZ/G2UL SoC. The VSPD block is identical to RZ/G2L
SoC and therefore use RZ/G2L fallback to avoid any driver changes.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Commit d7894721f73b ("media: docs: Fix newline typo") aimed to fix the
newline typos in capture.c, but some of the typos were not fixed. Fix
the remaining newline typos.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
pm_runtime_enable() should happen prior to vfe_get() since vfe_get() calls
pm_runtime_resume_and_get().
This is a basic race condition that doesn't show up for most users so is
not widely reported. If you blacklist qcom-camss in modules.d and then
subsequently modprobe the module post-boot it is possible to reliably show
this error up.
The kernel log for this error looks like this:
qcom-camss ac5a000.camss: Failed to power up pipeline: -13
Fixes: 02afa816dbbf ("media: camss: Add basic runtime PM support")
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZoVNHOTI0PKMNt4_@hovoldconsulting.com/
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The use_count check was introduced so that multiple concurrent Raw Data
Interfaces RDIs could be driven by different virtual channels VCs on the
CSIPHY input driving the video pipeline.
This is an invalid use of use_count though as use_count pertains to the
number of times a video entity has been opened by user-space not the number
of active streams.
If use_count and stream-on count don't agree then stop_streaming() will
break as is currently the case and has become apparent when using CAMSS
with libcamera's released softisp 0.3.
The use of use_count like this is a bit hacky and right now breaks regular
usage of CAMSS for a single stream case. Stopping qcam results in the splat
below, and then it cannot be started again and any attempts to do so fails
with -EBUSY.
[ 1265.509831] WARNING: CPU: 5 PID: 919 at drivers/media/common/videobuf2/videobuf2-core.c:2183 __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common]
...
[ 1265.510630] Call trace:
[ 1265.510636] __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common]
[ 1265.510648] vb2_core_streamoff+0x24/0xcc [videobuf2_common]
[ 1265.510660] vb2_ioctl_streamoff+0x5c/0xa8 [videobuf2_v4l2]
[ 1265.510673] v4l_streamoff+0x24/0x30 [videodev]
[ 1265.510707] __video_do_ioctl+0x190/0x3f4 [videodev]
[ 1265.510732] video_usercopy+0x304/0x8c4 [videodev]
[ 1265.510757] video_ioctl2+0x18/0x34 [videodev]
[ 1265.510782] v4l2_ioctl+0x40/0x60 [videodev]
...
[ 1265.510944] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 0 in active state
[ 1265.511175] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 1 in active state
[ 1265.511398] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 2 in active st
One CAMSS specific way to handle multiple VCs on the same RDI might be:
- Reference count each pipeline enable for CSIPHY, CSID, VFE and RDIx.
- The video buffers are already associated with msm_vfeN_rdiX so
release video buffers when told to do so by stop_streaming.
- Only release the power-domains for the CSIPHY, CSID and VFE when
their internal refcounts drop.
Either way refusing to release video buffers based on use_count is
erroneous and should be reverted. The silicon enabling code for selecting
VCs is perfectly fine. Its a "known missing feature" that concurrent VCs
won't work with CAMSS right now.
Initial testing with this code didn't show an error but, SoftISP and "real"
usage with Google Hangouts breaks the upstream code pretty quickly, we need
to do a partial revert and take another pass at VCs.
This commit partially reverts commit 89013969e232 ("media: camss: sm8250:
Pipeline starting and stopping for multiple virtual channels")
Fixes: 89013969e232 ("media: camss: sm8250: Pipeline starting and stopping for multiple virtual channels")
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZoVNHOTI0PKMNt4_@hovoldconsulting.com/
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
`tda1997x_codec_driver` is not modified after its declaration, and it
is only passed to `devm_snd_soc_register_component()`, which expects
a constant `snd_soc_component_driver`.
Move `tda1997x_codec_driver` to a read-only section by declaring it
const.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Currently, the Raspberry Pi PiSP Backend (BE) ISP is only present on the
Broadcom BCM2712-based Raspberry Pi 5. Hence add a dependency on
ARCH_BCM2835, to prevent asking the user about this driver when
configuring a kernel without Broadcom BCM2835 family support. The
dependency can be relaxed if/when the encoder appears on other SoC
families.
Fixes: 12187bd5d4f8 ("media: raspberrypi: Add support for PiSP BE")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: FLorian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The documentation of the Memory Consistency Flags was part of the struct
v4l2_buffer documentation, but that struct doesn't use those flags. Instead
it is used by VIDIOC_CREATE_BUFS and VIDIOC_REQBUFS. Move the documentation
from buffer.rst to vidioc-reqbufs.rst which is where it belongs.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The v4l_print_create_buffers() function was missing a ', ' in
the pr_cont call, leading to logs like this:
[93293.533425] video0: VIDIOC_CREATE_BUFS: index=0, count=0, memory=dmabuf, capabilities=0x00000297, max num buffers=32type=vid-cap, width=0, height=0, pixelformat=.... little-endian (0x00000000),
field=any, bytesperline=0, sizeimage=0, colorspace=0, flags=0x0, ycbcr_enc=0, quantization=0, xfer_func=0
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
|
|
The documentation for V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS and
V4L2_BUF_CAP_SUPPORTS_REMOVE_BUFS was missing. Add this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
|
|
This reverts commit b9302fa7ed979e84b454e4ca92192cf485a4ed41.
As Fedor Pchelkin pointed out, this commit violates the
convention of using the macro return value, which causes errors.
For example, in functions tda18271_attach(), xc5000_attach(),
simple_tuner_attach().
Link: https://lore.kernel.org/linux-media/20240424202031.syigrtrtipbq5f2l@fpc/
Suggested-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There is a spelling mistake in a string in the gc05a2_test_pattern_menu
array. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Ensure index in rtl2830_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
Fixes: df70ddad81b4 ("[media] rtl2830: implement PID filter")
Signed-off-by: Junlin Li <make24@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Ensure index in rtl2832_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
Signed-off-by: Junlin Li <make24@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 4b01e01a81b6 ("[media] rtl2832: implement PID filter")
[hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg]
|
|
The vivid driver supports media controller support for quite a long
time now, so drop that from the list.
Since commit 4c4dacb052d4 ("media: vivid: loopback based on
'Connected To' controls") making EDID changes causes correct signaling
to happen, but what is still missing is the 100 ms delay required before
signaling that there is an HPD. Modify this TODO item accordingly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
GCC5 cannot figure out that the expressions are constant, and that
triggers a build failure. Rewrite the expressions.
The following gcc5 error is workaround:
#define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
^
BM_PXP_CSC1_COEF0_YCBCR_MODE |
^
#define BM_PXP_CSC1_COEF0_YCBCR_MODE 0x80000000
^
drivers/media/platform/nxp/imx-pxp.c: In function 'pxp_setup_csc':
drivers/media/platform/nxp/imx-pxp.h:582:38: error: initializer element is not constant
drivers/media/platform/nxp/imx-pxp.c:374:4: note: in expansion of macro 'BM_PXP_CSC1_COEF0_YCBCR_MODE'
drivers/media/platform/nxp/imx-pxp.h:582:38: note: (near initialization for 'csc1_coef_bt601_lim[0]')
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
'struct media_entity_operations' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
20694 1394 32 22120 5668 drivers/media/platform/ti/cal/cal-camerarx.o
After:
=====
text data bss dec hex filename
20726 1362 32 22120 5668 drivers/media/platform/ti/cal/cal-camerarx.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
