summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-12-08arm64: dts: qcom: sm8650: add interconnect dependent device nodesNeil Armstrong1-11/+2956
Add Hardware nodes that depends on an interconnect property to be valid. The includes: - all QUP i2s/spi nodes - PCIe - UFS - SDHCI - Display - HWMON Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-6-b25fb781da52@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-08arm64: dts: qcom: sm8650: add initial SM8650 QRD dtsNeil Armstrong2-0/+532
Add initial QRD (Qualcomm Reference Device) DT, it supports boot to shell with buttons, leds and USB peripheral. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-5-b25fb781da52@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-08arm64: dts: qcom: sm8650: add initial SM8650 MTP dtsNeil Armstrong2-0/+447
Add initial QRD (Qualcomm Reference Device) DT, only boots to shell with USB device support. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-4-b25fb781da52@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-08arm64: dts: qcom: pm8550ve: make PMK8550VE SID configurableNeil Armstrong3-3/+5
The pm8550ve can be found with a different SID on SM8650 platforms, make it configurable. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-3-b25fb781da52@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-08arm64: dts: qcom: add initial SM8650 dtsiNeil Armstrong1-0/+2437
Add initial DTSI for the Qualcomm SM8650 platform, only contains nodes which doesn't depend on interconnect. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-2-b25fb781da52@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-08dt-bindings: arm: qcom: document SM8650 and the reference boardsNeil Armstrong1-0/+7
Document the SM8650 SoC and based MTP (Mobile Test Platforms) and QRD (Qualcomm Reference Device) boards. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-1-b25fb781da52@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-08Merge branch 'icc-sm8650' of ↵Bjorn Andersson2-0/+290
https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into arm64-for-6.8 Merge the SM8650 interconnect binding, to gain access to the interconnect port constants.
2023-12-08Merge branch ↵Bjorn Andersson10-2/+617
'20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into arm64-for-6.8 Merge the SM8650 clock bindings, to gain access to the clock constants.
2023-12-07arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device treeLuka Panio2-0/+624
Initial support for Xiaomi Pad 6 tablet, that have sm8250 soc. Signed-off-by: Luka Panio <lukapanio@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231125220315.118922-2-lukapanio@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07dt-bindings: arm: qcom: Add Xiaomi Pad 6 (xiaomi-pipa)Luka Panio1-0/+1
Add a compatible for Xiaomi Pad 6. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Luka Panio <lukapanio@gmail.com> Link: https://lore.kernel.org/r/20231125220315.118922-1-lukapanio@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sm8550-qrd: enable IPAAlex Elder1-0/+7
Enable IPA on the SM8550 QRD. The GSI firmware on this platform is loaded by the AP. Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20231124181718.915208-3-elder@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sm8550: add IPA informationAlex Elder1-0/+39
Add IPA-related nodes and definitions to "sm8550.dtsi", which uses IPA v5.5. Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20231124181718.915208-2-elder@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07dt-bindings: arm: qcom-soc: extend pattern matching for X1E80100 SoCSibi Sankar1-4/+4
Extend pattern matching to support the X1E platform name. Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231124100608.29964-2-quic_sibis@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: minor whitespace cleanup around '='Krzysztof Kozlowski5-5/+5
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231124095049.58618-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: ipq8074: Add QUP4 SPI nodeRobert Marko1-0/+14
Add node to support the QUP4 SPI controller inside of IPQ8074. Some devices use this bus to communicate to a Bluetooth controller. Signed-off-by: Robert Marko <robimarko@gmail.com> Link: https://lore.kernel.org/r/20231123121324.1046164-1-robimarko@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: qdu1000: Add ECPRI clock controllerImran Shaik1-0/+14
Add device node for ECPRI clock controller on qcom QDU1000 and QRU1000 SoCs. Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231123064735.2979802-5-quic_imrashai@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sm8550: fix USB wakeup interrupt typesJohan Hovold1-2/+2
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Note that only triggering on rising edges can be used to detect resume events but not disconnect events. Fixes: 7f7e5c1b037f ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes") Cc: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20231120164331.8116-12-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sm8150: fix USB wakeup interrupt typesJohan Hovold1-4/+4
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes") Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes") Cc: stable@vger.kernel.org # 5.10 Cc: Jonathan Marek <jonathan@marek.ca> Cc: Jack Pham <quic_jackp@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Jack Pham <quic_jackp@quicinc.com> Link: https://lore.kernel.org/r/20231120164331.8116-11-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sm6375: fix USB wakeup interrupt typesJohan Hovold1-2/+2
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: 59d34ca97f91 ("arm64: dts: qcom: Add initial device tree for SM6375") Cc: stable@vger.kernel.org # 6.2 Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231120164331.8116-10-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sdm845: fix USB wakeup interrupt typesJohan Hovold1-4/+4
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes") Cc: stable@vger.kernel.org # 4.20 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231120164331.8116-9-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sdm670: fix USB wakeup interrupt typesJohan Hovold1-2/+2
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: 07c8ded6e373 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees") Cc: stable@vger.kernel.org # 6.2 Cc: Richard Acayan <mailingradian@gmail.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Richard Acayan <mailingradian@gmail.com> Link: https://lore.kernel.org/r/20231120164331.8116-8-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sc8180x: fix USB wakeup interrupt typesJohan Hovold1-4/+4
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes") Cc: stable@vger.kernel.org # 6.5 Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231120164331.8116-7-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sc7280: fix usb_2 wakeup interrupt typesJohan Hovold1-2/+2
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Note that only triggering on rising edges can be used to detect resume events but not disconnect events. Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231120164331.8116-6-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sc7280: fix usb_1 wakeup interrupt typesJohan Hovold1-2/+2
A recent cleanup reordering the usb_1 wakeup interrupts inadvertently switched the DP and SuperSpeed interrupt trigger types. Fixes: 4a7ffc10d195 ("arm64: dts: qcom: align DWC3 USB interrupts with DT schema") Cc: stable@vger.kernel.org # 5.19 Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231120164331.8116-5-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sc7180: fix USB wakeup interrupt typesJohan Hovold1-2/+2
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes") Cc: stable@vger.kernel.org # 5.10 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231120164331.8116-4-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sa8775p: fix USB wakeup interrupt typesJohan Hovold1-6/+6
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Note that only triggering on rising edges can be used to detect resume events but not disconnect events. Fixes: de1001525c1a ("arm64: dts: qcom: sa8775p: add USB nodes") Cc: Shazad Hussain <quic_shazhuss@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20231120164331.8116-3-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: msm8916-longcheer-l8150: Add battery and chargerNikita Travkin1-6/+37
Longcheer L8150 doesn't have any dedicated fuel-gauge or charger, instead making use of the pmic hardware blocks for those purposes. Add pm8916 bms and charger, as well as the battery cell description that those blocks rely on. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20231120-pm8916-dtsi-bms-lbc-v4-3-4f91056c8252@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: pm8916: Add BMS and chargerNikita Travkin1-0/+48
pm8916 contains some hardware blocks for battery powered devices: - VM-BMS: Battery voltage monitoring block. - LBC: Linear battery charger. Add them to the pmic dtsi so the devices that make use of those blocks can enable them. Signed-off-by: Nikita Travkin <nikita@trvn.ru> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231120-pm8916-dtsi-bms-lbc-v4-2-4f91056c8252@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sc7280: Add 0xac Adreno speed binKonrad Dybcio1-6/+6
A643 (A635 speedbin 0xac) tops out at 812 MHz. Fill in the opp-supported-hw appropriately. Note that fuseval 0xac is referred to as speedbin 1 downstream, but that was already in use upstream, so 2 was chosen instead. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230926-topic-a643-v2-4-06fa3d899c0a@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sc7280: Mark Adreno SMMU as DMA coherentKonrad Dybcio1-0/+1
The SMMUs on sc7280 are cache-coherent. APPS_SMMU is marked as such, mark the GPU one as well. Fixes: 96c471970b7b ("arm64: dts: qcom: sc7280: Add gpu support") Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230926-topic-a643-v2-3-06fa3d899c0a@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sc7280: Fix up GPU SIDsKonrad Dybcio1-1/+2
GPU_SMMU SID 1 is meant for Adreno LPAC (Low Priority Async Compute). On platforms that support it (in firmware), it is necessary to describe that link, or Adreno register access will hang the board. The current settings are functionally identical, *but* due to what is likely hardcoded security policies, the secure firmware rejects them, resulting in the board hanging. To avoid that, alter the settings such that SID 0 and 1 are described separately. Fixes: 96c471970b7b ("arm64: dts: qcom: sc7280: Add gpu support") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230926-topic-a643-v2-2-06fa3d899c0a@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sc7280: Add ZAP shader supportKonrad Dybcio2-0/+11
Non-Chrome SC7280-family platforms ship a ZAP shader with the Adreno GPU. Describe that and make sure it doesn't interfere with Chrome devices. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230926-topic-a643-v2-1-06fa3d899c0a@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07dt-bindings: arm: qcom-soc: extend pattern for matching existing SoCsKrzysztof Kozlowski1-8/+8
Add missing QDU, QRU and SDA platform names to the pattern matching all Qualcomm compatibles. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231120100617.47156-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sdx75-idp: Enable USB3 and PHY supportRohit Agarwal1-0/+29
Enable the support for USB3 controller, QMP PHY and HS PHY on SDX75 IDP. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20231117080737.606687-4-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: Add USB3 and PHY support on SDX75Rohit Agarwal1-0/+118
Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and HS PHY on SDX75. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20231117080737.606687-3-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: Add interconnect nodes for SDX75Rohit Agarwal1-0/+52
Add interconnect nodes to support interconnects on SDX75. Also parallely add the interconnect property for UART required so that the bootup to shell does not break with interconnects in place. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20231117080737.606687-2-quic_rohiagar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sm8350: Fix remoteproc interrupt typeNia Espera1-4/+4
In a similar vein to https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasivam@linaro.org/, the remote processors on sm8350 fail to initialize with the 'correct' (i.e., specified in downstream) IRQ type. Change this to EDGE_RISING. Signed-off-by: Nia Espera <nespera@igalia.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-4-3a638b02eea5@igalia.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: pm8350k: Remove hanging whitespaceNia Espera1-1/+1
pmk8350 has a random tab character inserted, so remove it. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Nia Espera <nespera@igalia.com> Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-3-3a638b02eea5@igalia.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sm8350: Fix DMA0 addressNia Espera1-2/+2
DMA0 node downstream is specified at 0x900000, so fix the typo. Without this, enabling any i2c node using DMA0 causes a hang. Fixes: bc08fbf49bc8 ("arm64: dts: qcom: sm8350: Define GPI DMA engines") Fixes: 41d6bca799b3 ("arm64: dts: qcom: sm8350: correct DMA controller unit address") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Nia Espera <nespera@igalia.com> Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-2-3a638b02eea5@igalia.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07dt-bindings: iio: adc: qcom: Add Qualcomm smb139xNia Espera2-0/+22
Bindings for a charger controller chip found on sm8350 Signed-off-by: Nia Espera <nespera@igalia.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-1-3a638b02eea5@igalia.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sc8180x: align APSS with bindingsKrzysztof Kozlowski1-1/+1
SC8180x APSS Devicetree bindings expect qcom,sc8180x-apss-shared to use qcom,sdm845-apss-shared fallback: sc8180x-lenovo-flex-5g.dtb: mailbox@17c00000: compatible: 'oneOf' conditional failed, one must be fixed: ['qcom,sc8180x-apss-shared'] is too short Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231111204725.35707-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sm6375-pdx225: add fixed touchscreen AVDD regulatorKrzysztof Kozlowski1-2/+12
The Samsung S6SY761 touchscreen bindings expect AVDD regulator which is missing in the Sony Xperia PDX225 DTS. There is however pinctrl setting for in the touchscreen device node with similar name: "avdd", so assume author wanted to control a fixed regulator with a GPIO. This fixes dtbs_check warning: sm6375-sony-xperia-murray-pdx225.dtb: touchscreen@48: 'avdd-supply' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231111164229.63803-6-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sm6125: add interrupts to DWC3 USB controllerKrzysztof Kozlowski1-0/+4
Add interrupts to SM6125 DWC3 USB controller, based on downstream/vendor code of Trinket DTSI from Xiaomi Laurel device, to fix dtbs_check warnings: sm6125-xiaomi-laurel-sprout.dtb: usb@4ef8800: 'interrupt-names' is a required property sm6125-xiaomi-laurel-sprout.dtb: usb@4ef8800: 'oneOf' conditional failed, one must be fixed: 'interrupts' is a required property 'interrupts-extended' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20231111164229.63803-5-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sm6115: align mem timer size cells with bindingsKrzysztof Kozlowski1-9/+9
Commit 70d1e09ebf19 ("arm64: dts: qcom: sm6115: Use 64 bit addressing") converted all addresses to 64-bit addressing, but the ARMv7 memory mapped architected timer bindings expect sizes up to 32-bit. Keep 64-bit addressing but change size of memory mapping to 32-bit (size-cells=1) and adjust the ranges to match this. This fixes dtbs_check warnings like: sm6115p-lenovo-j606f.dtb: timer@f120000: #size-cells:0:0: 1 was expected Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231111164229.63803-4-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOsKrzysztof Kozlowski1-2/+2
Linux handles both versions, but bindings expect GPIO properties to have 'gpios' suffix instead of 'gpio': sa8155p-adp.dtb: pci@1c00000: Unevaluated properties are not allowed ('perst-gpio' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231111164229.63803-3-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sc8180x-primus: use 'gpios' suffix for PCI GPIOsKrzysztof Kozlowski1-2/+2
Linux handles both versions, but bindings expect GPIO properties to have 'gpios' suffix instead of 'gpio': sc8180x-primus.dtb: pci@1c10000: Unevaluated properties are not allowed ('perst-gpio', 'wake-gpio' were unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231111164229.63803-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sc8180x-flex-5g: use 'gpios' suffix for PCI GPIOsKrzysztof Kozlowski1-2/+2
Linux handles both versions, but bindings expect GPIO properties to have 'gpios' suffix instead of 'gpio': sc8180x-lenovo-flex-5g.dtb: pci@1c08000: Unevaluated properties are not allowed ('perst-gpio', 'wake-gpio' were unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231111164229.63803-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sdm845: correct Soundwire node nameKrzysztof Kozlowski4-4/+4
Soundwire Devicetree bindings expect the Soundwire controller device node to be named just "soundwire": sdm845-db845c.dtb: swm@c85: $nodename:0: 'swm@c85' does not match '^soundwire(@.*)?$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20231111095617.16496-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: sdm845-db845c: correct LED panic indicatorKrzysztof Kozlowski1-1/+1
There is no "panic-indicator" default trigger but a property with that name: sdm845-db845c.dtb: leds: led-0: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected) Fixes: 3f72e2d3e682 ("arm64: dts: qcom: Add Dragonboard 845c") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231111095617.16496-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07arm64: dts: qcom: qrb5165-rb5: correct LED panic indicatorKrzysztof Kozlowski1-1/+1
There is no "panic-indicator" default trigger but a property with that name: qrb5165-rb5.dtb: leds: led-user4: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected) Fixes: b5cbd84e499a ("arm64: dts: qcom: qrb5165-rb5: Add onboard LED support") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231111094623.12476-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 02:39:30 +0300