summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-12-23ARM: dts: tango4: Initial device treesMarc Gonzalez4-0/+200
This device tree was tested on a Sigma Designs SMP8758 Vantage-1172 Rev E1 development board. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23Merge tag 'sunxi-dt-for-4.5-2' of ↵Olof Johansson9-1/+356
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner DT patches, round 2 Mostly some audio codec patches to enable it on more boards, and a bunch devices activation (Ethernet, touchscreen, backlights). One more board has been added too. * tag 'sunxi-dt-for-4.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet ARM: dts: sun7i: Enable gmac on Wits Pro A20 DKT ARM: dt: sun7i: Enable audio codec on MK808C ARM: sunxi: dt: enable audio codec on mk802 ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet ARM: dts: sun7i: Add backlight node to Wexler TAB7200 tablet ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet ARM: dts: sun7i: Enable PWM controller on Wexler TAB7200 tablet ARM: dts: sun4i: gemei-g9: Enable PA GPIO pin configuration ARM: dts: sun4i: Enable onboard codec used on the pov protab2-ips9 tablet ARM: dts: sun5i: Enable onboard codec used on the UTOO P66 tablet Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23Merge tag 'at91-4.5-dt2' of ↵Olof Johansson4-1/+298
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Second batch of DT changes for 4.5: - addition of sound nodes for sama5d2 and the xplained - addition of a new patform by Landis+Gyr: VInCo * tag 'at91-4.5-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91/dt: sama5d2 Xplained: add pdmic node ARM: at91/dt: sama5d2: add pdmic node ARM: at91/dt: Add Support for the L+G VInCo platform Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23Merge tag 'imx-dt-4.5' of ↵Olof Johansson43-76/+2028
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt The i.MX device tree updates for 4.5: - New boards support: imx51-ts4800, imx6q-novena, CompuLab imx7d SoM/SBC, vf610m4-cosmic - Add ADC device support for imx6ul and imx7d - Remove config space from PCIe controller ranges property for i.MX6 - Add Vivante GPU nodes for i.MX6 - Add DCU, LCD, and SATA devices for LS1021A - A series to update Ventana gw5xxx boards getting HDMI and LVDS to work simultaneously and devices like PWM and SPI added - Quite a few random cleanups and minor updates * tag 'imx-dt-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits) ARM: dts: imx7d: sbc-imx7: add basic board support ARM: dts: imx7d: cl-som-imx7: add basic module support ARM: dts: TS-4800: add touchscreen support ARM: dts: ts-4800: Add LCD support ARM: dts: imx6q: add Novena board devicetree: bindings: Add vendor prefix for Kosagi ARM: dts: TS-4800: use weim IP to map the FPGA ARM: dts: TS-4800: drop uart rts/cts pin reservations ARM: dts: imx6: add Vivante GPU nodes ARM: dts: imx28: add alternate auart4 pinmux ARM: dts: ls1021a: add sata node to dts ARM: dts: TS-4800: add basic device tree of: documentation: add bindings documentation for TS-4800 of: add vendor prefix for Technologic Systems ARM: dts: imx7d-sdb: add ADC support ARM: dts: imx7d.dtsi: add ADC support ARM: dts: vf-colibri: add CAN support ARM: mxs: dt: cfa10057: fix backlight PWM ARM: dts: imx6qdl: move GIC to right location in DT ARM: dts: imx6qdl: add IPU aliases ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23Merge tag 'omap-for-v4.5/dt-pt2' of ↵Olof Johansson40-175/+689
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Second set of omap device tree changes for v4.5 merge window. This series updates the EDMA bindings based on the various fixes to split EDMA into separate independent devices. It also adds support for more devices on the CompuLab cm-t335 and LogicPD Torpedo boards, and enables the new bindings for qspi for am437x and dra7. There are also few dra7 regulator fixes, and change of gpoi-key,wakeup to wakeup-source. These depend on commit ae0add740cd0 ("dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type") already merged into mainline. * tag 'omap-for-v4.5/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: LogicPD Torpedo: Add Touchscreen Support ARM: dts: DRA7-EVM: Add regulator-allow-bypass property for ldo9 ARM: dts: DRA72-EVM: Add regulator-allow-bypass property for ldo1 and ldo2 ARM: dts: AM4372: add entry for qspi mmap region ARM: dts: DRA7: add entry for qspi mmap region ARM: OMAP2+: LogicPD Torpedo: Revert Duplicative Entries ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth ARM: OMAP2+: LogicPD Torpedo: Add LCD Type 15 Support ARM: dts: cm-t335: add support for bluetooth ARM: dts: cm-t335: add support for DVI/LCD ARM: dts: cm-t335: add support for I2C GPIO expander ARM: dts: cm-t335: add support for SBC-T335 ARM: dts: cm-t335: add support for USB0 ARM: dts: omap: replace legacy *,wakeup property with wakeup-source ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source property ARM: DTS: am437x: Use the new DT bindings for the eDMA3 ARM: DTS: am33xx: Use the new DT bindings for the eDMA3 dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23Merge tag 'socfpga_dts_for_v4.5_part_2' of ↵Olof Johansson7-54/+60
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS update for v4.5, part 2 - clean up mcvevk dts file, replace space with tab - Disable SDMMC node in base socfpga.dtsi file * tag 'socfpga_dts_for_v4.5_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: Enable MMC support at correct place in the DT ARM: socfpga: Repair incorrectly applied MCV patch Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23Merge tag 'v4.5-rockchip-dts32-2' of ↵Olof Johansson14-59/+1237
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Another new soc - the rk3228 quad-core cortex-a7, a new rk3036 board, support for the efuses on Rockchip socs and some improvements for rk3288 regulators. * tag 'v4.5-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add the kylin board for rk3036 ARM: dts: rockchip: add the sdio/sdmmc node for rk3036 ARM: dts: rockchip: fix the pinctrl bias settings for rk3036 ARM: dts: rockchip: add eFuse node for rk3188 SoCs ARM: dts: rockchip: add eFuse node for rk3066a SoCs ARM: dts: rockchip: add eFuse config of rk3288 SoC ARM: dts: rockchip: add rk3228-evb board ARM: dts: rockchip: add core rk3228 dtsi clk: rockchip: Add the clock ids of rk3288 eFuses ARM: dts: rockchip: Fix typo in rk3288 sdmmc card detect pin name ARM: dts: rockchip: fix voltage ranges for rk3288-evb-act8846 board ARM: dts: rockchip: move the public part to rk3288-evb common ARM: dts: rockchip: add 2 regulators for rk3288-evb-act8846 ARM: dts: rockchip: correct the name of REG8 for rk3288-evb-act8846 clk: rockchip: add dt-binding header for rk3228 clk: rockchip: add id for mipidsi sclk on rk3288 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23Merge tag 'lpc18xx_dts_for_4.5' of https://github.com/manabian/linux-lpc ↵Olof Johansson4-0/+54
into next/dt Device Tree additions for LPC18xx platform NXP LPC18xx EEPROM support plus board updates for CIAA board and EA4357 Dev kit. * tag 'lpc18xx_dts_for_4.5' of https://github.com/manabian/linux-lpc: ARM: dts: lpc4337-ciaa: add i2c0 and devices ARM: dts: lpc4337-ciaa: enable SCT-PWM ARM: dts: lpc4357-ea4357: add mma7455 i2c accelerometer ARM: dts: lpc4357: enable EEPROM memory ARM: dts: lpc18xx: add EEPROM memory node Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-23Merge tag 'v4.4-next-dts' of https://github.com/mbgg/linux-mediatek into next/dtOlof Johansson16-12/+211
Add regulators to the scpsys binding. Move the include of the reset contoller to include/dt-bindings/reset. Add basic support for mt2701 SoC and evaluation board. * tag 'v4.4-next-dts' of https://github.com/mbgg/linux-mediatek: dt-bindings: soc: Add supplies for Mediatek SCPSYS unit ARM: mediatek: DT: Move reset controller constants into common location ARM: dts: mediatek: add MT2701 basic support Document: DT: Add bindings for mediatek MT2701 SoC Platform Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'mvebu-dt-4.5-3' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson9-3/+447
mvebu dt for 4.5 (part 3) Add dts for the following boards: - Zyxel NSA325 - PogoPlug series 4 Add GPU support for Dove Update boolean property to wakeup source for isil * tag 'mvebu-dt-4.5-3' of git://git.infradead.org/linux-mvebu: ARM: dts: armada: replace isil, irq2-can-wakeup-machine with wakeup-source property ARM: dts: enable GPU for SolidRun's Cubox ARM: dts: dove: add DT GPU support ARM: mvebu: kirkwood: add PogoPlug series 4 device tree ARM: mvebu: add kirkwood compatibles for cloudengine boards ARM: dts: kirkwood: Add DTS for Zyxel NSA325 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'renesas-dt3-for-v4.5' of ↵Olof Johansson16-60/+363
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Third Round of Renesas ARM Based SoC DT Updates for v4.5 * Use SoC-specific usb-dmac and IPMMU compatibility strings * Add internal delay for i2c IPs * Add missing serial devices to r8a7793 * Enable DMA for r8a7793 serial devices * Add serial port config to chosen/stdout-path * Tidyup #sound-dai-cells settings for r8a7798/bockw * Remove deprecated #gpio-range-cells from r8a7793 * Add EtherAVB support to r8a7791 * Add MSIOF support to sh73a0 * tag 'renesas-dt3-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (25 commits) ARM: shmobile: r8a779x: use SoC-specific usb-dmac compatibility strings ARM: shmobile: r8a7794: IPMMU compat string SoC part number update ARM: shmobile: r8a7793: IPMMU compat string SoC part number update ARM: shmobile: r8a7791: IPMMU compat string SoC part number update ARM: shmobile: r8a7790: IPMMU compat string SoC part number update ARM: shmobile: r8a7794: dtsi: add internal delay for i2c IPs ARM: shmobile: r8a7791: dtsi: add internal delay for i2c IPs ARM: shmobile: r8a7790: dtsi: add internal delay for i2c IPs ARM: shmobile: r8a7793: Describe DMA for the serial ports ARM: shmobile: r8a7793: Add missing serial devices to DT ARM: shmobile: lager dts: Add serial port config to chosen/stdout-path ARM: shmobile: porter dts: Add serial port config to chosen/stdout-path ARM: shmobile: silk dts: Add serial port config to chosen/stdout-path ARM: shmobile: gose dts: Add serial port config to chosen/stdout-path ARM: shmobile: bockw dts: Update console parameters ARM: shmobile: ape6evm dts: Add serial port config to chosen/stdout-path ARM: shmobile: alt dts: Add serial port config to chosen/stdout-path ARM: shmobile: koelsch dts: Add serial port config to chosen/stdout-path ARM: shmobile: r8a7778: tidyup #sound-dai-cells settings ARM: shmobile: bockw dts: Override #sound-dai-cells to zero ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'qcom-dt-for-4.5' of ↵Olof Johansson17-46/+1340
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm ARM Based Device Tree Updates for v4.5 * Add support for Sony Xperia Z * Updates for Sony Honami board * Updates for APQ8064 generic platform * Updates for MSM8974 generic platform * Add fixed rate oscillators for MSM8960 and APQ8064 * Add documentation for SMSM and SMP2P * Fixup PMIC compat strings * Add support for SMEM, RPM/SMD on APQ8084 * Fixup compat on IFC5640 * tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (24 commits) arm: dts: Add support for PMA8084 on APQ8084 arm: dts: Add RPM/SMD support on APQ8084 arm: dts: Add APQ8084 SMEM nodes ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6 arm: dts: qcom: apq8064: Add fixed rate on-board oscillators ARM: dts: qcom: msm8974: Add i2c8 node ARM: dts: qcom: msm8974: Disable wled and move it to honami arm: dts: qcom: Add generic PMIC gpio/MPP compat strings arm: dts: qcom: Add aliases for PMICs arm: dts: qcom: Update ifc6540 compat for qcom boot format arm: dts: qcom: Add board clocks ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node ARM: dts: qcom: apq8064: Declare all pm8921 regulators ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes dt-binding: soc: qcom: Introduce qcom, smp2p binding documentation dt-binding: soc: qcom: Add Qualcomm SMSM device tree documentation devicetree: Add hardware rng entry to qcom-apq8064.dtsi ARM: dts: qcom: msm8974-honami: Specify charging parameters ARM: dts: qcom: msm8974-honami: Add uSD slot nodes ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'at91-dt' of ↵Olof Johansson6-9/+327
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt First batch of DT changes for 4.5: - addition of nodes for sama5d2 & sama5d4 - some fixes for i2c hold time, compatible stings - addition of a new patform by DENX: the MA5D4 SoM and EVK * tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: sama5d2 Xplained: pmic needs a specific sda hold time ARM: at91/dt: sama5d4: update i2c compatible string ARM: at91/dt: sama5d4 master clock can run at 200MHz now ARM: at91/dt: sama5d2: add watchdog node ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK ARM: at91/dt: sama5d4: Add pinmux for 8-bit MMC0 bus ARM: at91/dt: sama5d4: Fix mmc0 pinmux comments Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'sunxi-dt-for-4.5' of ↵Olof Johansson23-25/+1536
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner DT changes for 4.5 Allwinner device-tree related patches for the 4.5 merge window. * Support for the H3 * Addition of the RSB to the relevant devices (sun8i, sun9i) * Addition of the Video Engine clocks for the older SoCs (sun4i, sun7i) * Addition of the DRAM gates for the older SoCs (sun4i, sun7i) * Addition of the audio codec to a bunch of boards * New board: ICNova SWAC * tag 'sunxi-dt-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (40 commits) ARM: dts: sun7i: Olimex A20-SOM-EVB: Enable mmc3 (baseboard SD socket) ARM: dts: sun7i: Olimex A20-SOM-EVB: Add LRADC keys ARM: dts: sun9i: cubieboard4: Enable Reduced Serial Bus controller ARM: dts: sun9i: cubieboard4: Enable consumer IR receiver ARM: dts: sun9i: cubieboard4: Enable LEDs ARM: dts: sun7i: Add VE (Video Engine) module clock node ARM: dts: sun4i: Add VE (Video Engine) module clock node ARM: dts: sun8i: Add Orange Pi Plus support ARM: dts: sunxi: Add Allwinner H3 DTSI ARM: dts: sun7i: Add DRAM gates ARM: dts: sun4i: Add DRAM gates ARM: dts: sun9i: Add NMI controller device node ARM: dts: sun9i: optimus: Enable Reduced Serial Bus controller ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi ARM: dts: sun9i: optimus: Enable consumer IR receiver ARM: dts: sun9i: Add consumer IR receiver device node and pinmux settings ARM: dts: sun9i: optimus: Enable LED3 ARM: dts: sun9i: Add A80 R_PIO pin controller device node ARM: dts: sun9i: Add TODO comments for the main and low power clocks ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'zynq-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx into next/dtOlof Johansson2-5/+7
arm: Xilinx Zynq dt patches for v4.5 - Various small DT changes, GPIO, slcr, cpu label * tag 'zynq-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx: ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs. ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property ARM: zynq: DT: Add interrupt-controller property to GPIO Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22ARM: dts: imx7d: sbc-imx7: add basic board supportIlya Ledvich2-0/+43
SBC-iMX7 is a single board computer designed for industrial and embedded applications. It is based on the Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with the CL-SOM-iMX7 System-on-Module providing most of the functions, and SB-SOM-iMX7 carrier board providing additional peripheral functions and connectors. http://www.compulab.co.il/products/sbcs/sbc-imx7-freescale-i-mx-7-single-board-computer/ http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/ Add basic board support, including SD card as a secondary boot and storage device Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2015-12-22ARM: dts: imx7d: cl-som-imx7: add basic module supportIlya Ledvich2-0/+287
CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on Freescale i.MX7 System-on-Chip family. http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/ Add basic DT support for standalone module (without a carrier board): * Memory configuration * eMMC * 2x Gigabit Ethernet ports (FEC1 and FEC2) * I2C2 bus * EEPROM * PCA9555 GPIO extender * PMIC * UART1 * USB OTG port Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2015-12-22ARM: dts: TS-4800: add touchscreen supportDamien Riegel1-0/+6
This commit enables the touchscreen on TS-4800, using the ts4800-ts driver. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: ts-4800: Add LCD supportDamien Riegel1-0/+102
This commit adds LCD support for the TS-4800. The panel is an Okaya RS800480T-7X0WQ and the timings have been extracted from Technologic Systems' tree. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx6q: add Novena boardSean Cross2-0/+786
Novena is an open-hardware laptop/desktop/bare board. See http://www.kosagi.com/w/index.php?title=Novena_Main_Page Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22devicetree: bindings: Add vendor prefix for KosagiSean Cross1-0/+1
Add a vendor prefix for Sutajio Ko-Usagi PTE Ltd., which goes by the more common name of Kosagi. Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Rob Herring <robh@kernel.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: TS-4800: use weim IP to map the FPGADamien Riegel1-21/+39
Previously, the device tree mapped the FPGA like any other IPs inside the SoC, but it is actually mapped through the WEIM (Wireless External Interface Module). This patch updates the device tree to make use of it. About the timings: in the image provided by the manufacturer, only CS0GCR1 is changed. The other values are the default ones, but the WEIM bindings expect them to be all explicitly set in the device tree, so I just put the default values in the dt. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: TS-4800: drop uart rts/cts pin reservationsDamien Riegel1-4/+0
These pins are actually not routed for UARTs, they should not be reserved. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx6: add Vivante GPU nodesLucas Stach3-0/+41
This adds the device nodes for 2D, 3D and VG GPU cores. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx28: add alternate auart4 pinmuxMans Rullgard1-0/+11
Add auart4 2-pin configuration on auart0 rts/cts pads. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: ls1021a: add sata node to dtsTang Yuantian3-0/+19
Added sata node to ls1021aqds and ls1021atwr board to support sata function. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: TS-4800: add basic device treeDamien Riegel2-1/+182
This device tree adds support for TS-4800 by Technologic Systems. This board is based on MX51-babbage, but there are some subtle differences in the pins used, and there is an additional FPGA that is memory-mapped. More details here: http://wiki.embeddedarm.com/wiki/TS-4800 Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22of: documentation: add bindings documentation for TS-4800Damien Riegel1-0/+6
This adds the documentation for the TS-4800 by Technologic Systems. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22of: add vendor prefix for Technologic SystemsDamien Riegel1-0/+1
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx7d-sdb: add ADC supportHaibo Chen1-0/+10
Add ADC support for imx7d-sdb board. Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx7d.dtsi: add ADC supportHaibo Chen1-0/+18
Add imx7d ADC support. Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: vf-colibri: add CAN supportStefan Agner1-0/+26
Add Colibri standard pinmux for FlexCAN controller instances. CAN is not a standard Colibri feature, but the datasheet predefines pins which provide CAN (compatible across some modules). Hence, add the pinmux on module level. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: mxs: dt: cfa10057: fix backlight PWMAlexandre Belloni1-2/+2
The backlight PWM is actually pwm4. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx6qdl: move GIC to right location in DTLucas Stach1-9/+9
No functional change, just moving the node to the place where it belongs according to its unit address. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx6qdl: add IPU aliasesPhilipp Zabel2-0/+2
This allows for consistent numbering of the IPU output and input ports. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx6: remove config space from PCIe controller ranges propertyLucas Stach1-2/+1
This has been moved to the reg property where it belongs for quite some time. The range has been unused by the kernel since then and with kernel 4.4 it's flagged as an unparsable range, as it does not comply to the PCI ranges DT binding. Fix this by removing the superfluous range. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx6: Change the clock name for spba clockShengjiu Wang3-7/+7
Audio IP need the spba clock, but original clock name "dma" is not accurate, so change it to name "spba". The audio driver has been using the new name "spba", the binding document has been updated. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: ls1021a: Add a TFT LCD panel.Meng Yi1-0/+9
Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Signed-off-by: Meng Yi <b56799@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: ls1021a: Add DCU dts node.Meng Yi1-0/+10
Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Signed-off-by: Meng Yi <b56799@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx: modify the clocks used by cpufreq driverBai Ping1-3/+1
As on i.MX7D, we using a virtual arm clk for CPU frequency scaling, so correct the clocks info used by the cpufreq driver. Signed-off-by: Bai Ping <b51503@freescale.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx: ventana: Add SPI support for GW52xxTim Harvey1-0/+17
This addes support for SPI available on an off-board connector available on some models of the GW52xx. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx: ventana: add PWM nodes for Ventana boardsTim Harvey6-0/+168
Ventana boards have an off-board connector with signals that can be pinmuxed as either GPIO or PWM. This patch adds pwm device-tree nodes in the disabled state which the bootloader can decide to enable based on bootloader config. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: vf6xx: Cosmic+: M4(nommu) initial supportAfzal Mohammed2-0/+91
Minimal Cortex-M4 device tree to boot Linux to shell. M4 is booted via Cortex-A5 running Linux using Stefan Agner's <stefan@agner.ch> "m4boot" utility. Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: vfxxx: Include support for dspi[23] functionality.Cory Tusar1-0/+24
Extend the existing Vybrid DSPI devicetree implementation to also describe the dspi2 and dspi3 functional blocks. Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx25: add alias for pwm nodesMarc Kleine-Budde1-0/+4
This, together with the corresponding patch to pwm-imx.c, allows to order the pwm devices correctly. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx6dl: Fix gpt compatibles, remove imx6q-gptMarkus Pargmann1-1/+1
imx6qdl.dtsi uses compatibles "fsl,imx6q-gpt", "fsl,imx31-gpt". imx6dl.dtsi uses compatibles "fsl,imx6dl-gpt", "fsl,imx6q-gpt" since commit 4e415ed8143f (ARM: dts: imx6dl: add imx6dl gpt specific compatible string) If imx6dl would be compatible with imx6q-gpt it would also have to be compatible with imx31-gpt which is currently missing. Based on the above mentioned patch I assume imx6q-gpt and imx6dl-gpt are not compatible. So imx6q-gpt should be removed as compatible. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx: ventana: Allow HDMI and LVDS to work simultaneouslyTim Harvey3-0/+21
Currently it is not possible to have HDMI and LVDS working simultaneously, because both ports try to use PLL5. Move the LVDS clock parent to PLL3_USB_OTG, so that HDMI and LVDS can be driven from independent sources. With this change the LDB pixel clock goes to 68.57 MHz, which is still within the valid range for the displays supported by the Ventana boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx: ventana: fix GW53xx/GW54xx lvds channelTim Harvey2-2/+2
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx: ventana: GW54xx PMIC swbst reg always-onTim Harvey1-0/+2
The GW54xx PMIC swbst regulator is used for LVDS power, CANbus xceiver and HDMI DDC and is enabled by the bootloader. Set the regulator to always-on so that Linux doesn't turn it off thinking its not needed. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22ARM: dts: imx25-pinfunc: add some more pin configurationsUwe Kleine-König1-0/+3
This patch adds some values that are needed for an out-of-tree device tree I'm currently working with. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 21:15:14 +0300