summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-05-08Merge tag 'riscv-dt-for-v6.10-take2' of ↵Arnd Bergmann9-711/+693
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt-late RISC-V Devicetrees for v6.10 Microchip: A simple addition of a power-monitor on the Icicle dev board, as the binding for it is now in mainline. StarFive: Support for the Milk-V Mars. This board is incredibly similar to the VisionFive v2 that is already supported, with only the really ethernet configuration being slightly different. Emil requested that a common dtsi file, so my fixes branch is pulled into for-next to avoid an annoying conflict between moved content and some erroneously added nodes that were removed as fixes this cycle. T-Head: Re-ordering of some nodes to match the DTS coding style on the th1520. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-for-v6.10-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: microchip: add pac1934 power-monitor to icicle riscv: dts: thead: Fix node ordering in TH1520 device tree riscv: dts: starfive: add Milkv Mars board device tree riscv: dts: starfive: introduce a common board dtsi for jh7110 based boards riscv: dts: starfive: visionfive 2: add "disable-wp" for tfcard riscv: dts: starfive: visionfive 2: add tf cd-gpios riscv: dts: starfive: visionfive 2: use cpus label for timebase freq riscv: dts: starfive: visionfive 2: update sound and codec dt node name dt-bindings: riscv: starfive: add Milkv Mars board riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi riscv: dts: starfive: visionfive 2: Remove non-existing I2S hardware riscv: dts: starfive: visionfive 2: Remove non-existing TDM hardware riscv: dts: starfive: Remove PMIC interrupt info for Visionfive 2 board Link: https://lore.kernel.org/r/20240508-crafter-cement-4f54e4182270@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07riscv: dts: microchip: add pac1934 power-monitor to icicleConor Dooley1-0/+32
The binding for this landed in v6.9, add the description. In the off-chance that there were people carrying local patches for this based on the driver shipped on the Microchip website (or vendor kernel) both the binding and sysfs filenames changed during upstreaming. Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-07RISC-V: add Milkv Mars board devicetreeConor Dooley7-684/+634
The Milkv Mars is a development board based on the Starfive JH7110 SoC. The board features: - JH7110 SoC - 1/2/4/8 GiB LPDDR4 DRAM - AXP15060 PMIC - 40 pin GPIO header - 3x USB 3.0 host port - 1x USB 2.0 host port - 1x M.2 E-Key - 1x eMMC slot - 1x MicroSD slot - 1x QSPI Flash - 1x 1Gbps Ethernet port - 1x HDMI port - 1x 2-lane DSI and 1x 4-lane DSI - 1x 2-lane CSI I fixed up some nits Emil pointed out. This merges fixes into for-next to avoid messing around with some nodes that were removed as fixes this cycle. Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-07riscv: dts: thead: Fix node ordering in TH1520 device treeThomas Bonnefille1-27/+27
According to the device tree coding style, nodes shall be ordered by unit address in ascending order. Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-05-07Merge tag 'aspeed-6.10-devicetree' of ↵Arnd Bergmann22-829/+4460
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt-late ASPEED device tree updates for 6.10 - New and removed machines: * IBM System1 AST2600 BMC, a x86 server * ASUS X4TF AST2600 BMC, a x86 server * ASRock SPC621D8HM3 AST2500 BMC, a Intel Xeon system * ASRock E3C256D4I AST2500 BMC, a Intel Xeon system * Add ASRock X570D4U's AST2500 BMC, an AMD Ryzen 5000 system * Facebook Harma's AST2600 BMC * Facebook Cloudripper is removed - Updates to machines merged this cycle, as well as bonnell, yosemite4, minerva and others * tag 'aspeed-6.10-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (52 commits) ARM: dts: aspeed: Add ASRock E3C256D4I BMC dt-bindings: arm: aspeed: document ASRock E3C256D4I dt-bindings: trivial-devices: add isil,isl69269 ARM: dts: aspeed: x4tf: Add dts for asus x4tf project dt-bindings: arm: aspeed: add ASUS X4TF board ARM: dts: aspeed: Remove Facebook Cloudripper dts ARM: dts: aspeed: drop unused ref_voltage ADC property ARM: dts: aspeed: harma: correct Mellanox multi-host property ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property ARM: dts: aspeed: Modify I2C bus configuration ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name ARM: dts: aspeed: Add vendor prefixes to lm25066 compat strings ARM: dts: aspeed: asrock: Use MAC address from FRU EEPROM ... Link: https://lore.kernel.org/r/CACPK8Xd2Qc9MQUJ-8GuRjmyU50oMHpmmHPHLqAh9W_1Gyqi2ug@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'amlogic-arm64-dt-for-v6.10' of ↵Arnd Bergmann14-5/+1028
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt-late Amlogic ARM64 DT changes for v6.10: - New Boards: - MNT Reform 2 CM4 adapter with a BPI-CM4 Module - AV400 (Amlogic A5) - BA400 (Amlogic A4) - Initial Amlogic A4 & A5 support - MIPI DSI support for G12A, G12B & SM1 SoCs - Overlay for Khadas TS050 panel for the Khadas VIM3/VIM3L - Amlogic T7 reset controller * tag 'amlogic-arm64-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: amlogic: Add Amlogic T7 reset controller arm64: dts: add support for A5 based Amlogic AV400 arm64: dts: add support for A4 based Amlogic BA400 dt-bindings: serial: amlogic,meson-uart: Add compatible string for A4 dt-bindings: arm: amlogic: add A5 support dt-bindings: arm: amlogic: add A4 support arm64: dts: meson: fix S4 power-controller node arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper arm64: meson: khadas-vim3l: add TS050 DSI panel overlay arm64: meson: g12-common: add the MIPI DSI nodes dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module Link: https://lore.kernel.org/r/6030a450-fb4e-4e27-a5c3-6f4e0f326d9a@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-02ARM: dts: aspeed: Add ASRock E3C256D4I BMCZev Weiss2-0/+323
Like the E3C246D4I, this is a reasonably affordable off-the-shelf mini-ITX AST2500/Xeon motherboard with good potential as an OpenBMC development platform. Booting the host requires a modicum of eSPI support that's not yet in the mainline kernel, but most other basic BMC functionality is available with this device-tree. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20240502002836.17862-8-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-05-02dt-bindings: arm: aspeed: document ASRock E3C256D4IZev Weiss1-0/+1
Document ASRock E3C256D4I board compatible. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240502002836.17862-7-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-05-02dt-bindings: trivial-devices: add isil,isl69269Zev Weiss1-0/+2
The ISL69269 is a PMBus voltage regulator with no configurable parameters. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240502002836.17862-6-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-05-01ARM: dts: aspeed: x4tf: Add dts for asus x4tf projectKelly Hung2-0/+582
Base on aspeed-g6.dtsi and can boot into BMC console. Signed-off-by: Kelly Hung <ppighouse@gmail.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://lore.kernel.org/r/20240430045853.3894633-3-Kelly_Hung@asus.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-05-01dt-bindings: arm: aspeed: add ASUS X4TF boardKelly Hung1-0/+1
Document the new compatibles used on ASUS X4TF. Signed-off-by: Kelly Hung <ppighouse@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240430045853.3894633-2-Kelly_Hung@asus.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-05-01ARM: dts: aspeed: Remove Facebook Cloudripper dtsTao Ren2-545/+0
Remove Facebook Cloudripper dts because the switch platform is not actively maintained (all the units are deprecated). Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Link: https://lore.kernel.org/r/20240411045622.7915-1-rentao.bupt@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: drop unused ref_voltage ADC propertyKrzysztof Kozlowski3-5/+0
Aspeed ADC "ref_voltage" property is neither documented nor used. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240405064624.18997-5-krzysztof.kozlowski@linaro.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: harma: correct Mellanox multi-host propertyKrzysztof Kozlowski1-1/+1
"mlx,multi-host" is using incorrect vendor prefix and is not documented. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240405064624.18997-4-krzysztof.kozlowski@linaro.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host propertyKrzysztof Kozlowski1-1/+1
"mlx,multi-host" is using incorrect vendor prefix and is not documented. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240405064624.18997-3-krzysztof.kozlowski@linaro.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: yosemite4: correct Mellanox multi-host propertyKrzysztof Kozlowski1-2/+2
"mlx,multi-host" is using incorrect vendor prefix and is not documented. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240405064624.18997-2-krzysztof.kozlowski@linaro.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: greatlakes: correct Mellanox multi-host propertyKrzysztof Kozlowski1-1/+1
"mlx,multi-host" is using incorrect vendor prefix and is not documented. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240405064624.18997-1-krzysztof.kozlowski@linaro.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Modify I2C bus configurationRenze Nicolai1-0/+7
Enable I2C bus 8 which is exposed on the IPMB_1 connector on the X570D4U mainboard. Additionally adds a descriptive comment to I2C busses 1 and 5. Signed-off-by: Renze Nicolai <renze@rnplus.nl> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMCRenze Nicolai1-16/+13
Additionally adds labels describing the ADC channels. Signed-off-by: Renze Nicolai <renze@rnplus.nl> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMCRenze Nicolai1-58/+37
Restructure GPIO table to fit maximum line length. Fix mistakes found while working on OpenBMC userland configuration and based on probing the board. Schematic for this board is not available. Because of this the choice was made to use a descriptive method for naming the GPIOs. - Push-pull outputs start with output-* - Open-drain outputs start with control-* - LED outputs start with led-* - Inputs start with input-* - Button inputs start with button-* - Active low signals end with *-n Signed-off-by: Renze Nicolai <renze@rnplus.nl> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: yosemite4: set bus13 frequency to 100kDelphine CC Chiu1-1/+1
Since the ocp debug card only supports 100k, the bus is also set to 100k. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> [AJ: Fixed fuzz due to prior IPMB patch] Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: Aspeed: Bonnell: Fix NVMe LED labelsEddie James1-4/+4
The PCA chip for the NVMe LEDs is wired up backwards, so correct the device tree labels. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug cardDelphine CC Chiu1-0/+7
Add OCP debug card devicetree config Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: ahe50dc: Update lm25066 regulator nameZev Weiss1-1/+1
A recent change to the lm25066 driver changed the name of its regulator from vout0 to vout; device-tree users of lm25066's regulator functionality (of which ahe50dc is the only one) thus require a corresponding update. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Cc: Conor Dooley <conor+dt@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Add vendor prefixes to lm25066 compat stringsZev Weiss2-3/+3
Due to the way i2c driver matching works (falling back to the driver's id_table if of_match_table fails) this didn't actually cause any misbehavior, but let's add the vendor prefixes so things actually work the way they were intended to. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: asrock: Use MAC address from FRU EEPROMZev Weiss2-0/+18
Like the more recently added ASRock BMC platforms, e3c246d4i and romed8hm3 also have the BMC's MAC address available in the baseboard FRU EEPROM, so let's add support for using it. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: system1: IBM System1 BMC boardAndrew Geissler2-0/+1624
Added a device tree for IBM system1 BMC board, which uses AST2600 SoC. Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://lore.kernel.org/r/20240125212154.4028640-3-ninad@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01dt-bindings: arm: aspeed: add IBM system1-bmcNinad Palsule1-0/+1
Document the new compatibles used on IBM system1-bmc Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://lore.kernel.org/r/20240125212154.4028640-2-ninad@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: FSI interrupt supportEddie James2-0/+6
Enable FSI interrupt controllers for AST2600 and P10BMC hub master. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20240215220759.976998-27-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Modify GPIO line namePeter Yin1-9/+29
Add: "reset-cause-platrst", "cpu0-err-alert", "leakage-detect-alert", "presence-post-card", "ac-power-button", "P0_I3C_APML_ALERT_L", "irq-uv-detect-alert", "irq-hsc-alert", "cpu0-prochot-alert", "cpu0-thermtrip-alert", "reset-cause-pcie", "pvdd11-ocp-alert" Rename: "power-cpu-good" to "host0-ready", "host-ready-n" to "post-end-n Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-13-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add retimer devicePeter Yin1-0/+8
Add pt5161l device in i2c bus12 and bus21. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-12-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Revise node namePeter Yin1-3/+3
Revise max31790 and delta_brick node name. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-11-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add ltc4286 devicePeter Yin1-0/+7
Add ltc4286 device. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-10-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add NIC Fru devicePeter Yin1-0/+6
Add MB NIC Device Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-9-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Revise max31790 addressPeter Yin1-4/+4
Revise max31790 address from 0x30 to 0x5e Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-8-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add PDB temperaturePeter Yin1-1/+6
Add PDB temperature sensor. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-7-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add spi-gpioPeter Yin1-0/+21
Add spi-gpio for tpm device. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-6-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add cpu power good line namePeter Yin1-1/+1
Add a line name for cpu power good. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-5-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Remove VuartPeter Yin1-4/+0
Remove vuart to avoid port conflict with uart2 Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-4-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: mapping ttyS2 to UART4.Peter Yin1-2/+2
Change routing to match SOL(Serial Over LAN) settings. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-3-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Revise SGPIO line name.Peter Yin1-2/+2
The same name as reset-control-smb-e1s change to reset-control-smb-e1s-0 and reset-control-smb-e1s-0. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-2-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: add sgpio line nameYang Chen1-0/+149
Add the SGPIO line name that the project's function can use by the meaningful name. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-12-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: add gpio line nameYang Chen1-0/+30
Add the GPIO line name that the project's function can use by the meaningful name. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-11-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: Add led-fan-fault gpioYang Chen1-0/+17
Add led-fan-fault gpio pin on the PCA9555 on the i2c bus 0. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-10-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: add fan rpm controllerYang Chen1-0/+42
Add fan rpm controller max31790 on all bus of FCB. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-9-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: add bus labels and aliasesYang Chen1-6/+16
Add bus labels and aliases for the fan control board. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-8-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: correct the address of eepromYang Chen1-2/+2
Correct the address from 0x51 to 0x54 of eeprom on the i2c bus 1 Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-7-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: Add temperature sensorYang Chen1-1/+6
Add one temperature sensor on i2c bus 1 Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-6-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: Enable power monitor deviceYang Chen1-0/+22
Enable power monitor device ina230 and ltc2945 on the i2c bus 0 Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-5-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: Change sgpio useYang Chen1-1/+1
Correct the sgpio use from sgpiom1 to sgpiom0 Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-4-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 12:52:16 +0300