summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-09-27ARM: OMAP: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.cJarkko Nikula3-14/+31
Active sidetone requires that McBSP interface clock doesn't idle and there is no mechanism in hwmod to turn autoidling on/off in runtime. McBSP2 and 3 in OMAP34xx share their interface clock with McBSP sidetone module and that interface clock must be active when the sidetone is operating. Sidetone has its own autoidle bit which should keep the interface clock active but it is broken. Putting the McBSP core to no-idle mode when the sidetone is active is no good either since it results to higher power consumption when using the threshold based DMA transfers. For making the McBSP code more generic, move this sidetone clock management with fixme comments to mach-omap2/mcbsp.c and pass pointer to it via platform data. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Paul Wamsley <paul@pwsan.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-27ARM: OMAP: mcbsp: Use per instance register cache sizeJarkko Nikula2-4/+5
Rationale here is to remove one global variable and to make possible to have variable size McBSP register maps inside SoC. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-27ARM: OMAP: mcbsp: Make threshold based transfer code genericJarkko Nikula2-76/+59
Remove CONFIG_ARCH_OMAP3 conditional compilation and cpu_is_omap34xx test around buffer threshold based transfer and DMA operating mode control. Use instead the buffer_size in platform data to determine when these sysfs controls are exposed and when to access related McBSP registers. Rationale for this is to make code generic and to allow to use it on OMAP4 that also supports threshold based transfers. Currently buffer_size variable is set only for OMAP3 SoCs but it is easy to extend to OMAP4 and any later OMAP version. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-27ARM: OMAP: mcbsp: Make tranceiver configuration control register access genericJarkko Nikula3-6/+9
McBSP transmit and receive configuration control registers must be set up for OMAP2430 and later. Replace is_omap tests in generic code with a new feature flag has_ccr in platform data so that there is no need to change code for any upcoming OMAP version. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-27ARM: OMAP: mcbsp: Make wakeup control genericJarkko Nikula3-34/+15
Currently wakeup control code is compiled only when CONFIG_ARCH_OMAP3 is set even it should be available for CONFIG_ARCH_OMAP4 only builds also. Fix this by making wakeup control generic so that it is executed whenever new feature flag has_wakeup in platform data is set. Currently flag is set for McBSP config types 3 and 4. Remove also old comments about idle mode settings and HW bug workarounds that were not updated during hwmod conversion. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-27ARM: OMAP: mcbsp: Implement generic register accessJarkko Nikula4-116/+82
Register access can be made more generic by calculating register address offsets runtime from common register definitions and by using reg_size and reg_step variables that are passed via platform data. Common register definitions are possible since McBSP registers are ordered similarly between OMAP versions. Remove also references to OMAP2+ specific config_type variable from generic McBSP code since other variables and feature flags are better to carry needed information from platform code. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-27ARM: OMAP: mcbsp: Move out omap_mcbsp_register_board_cfg from ↵Jarkko Nikula3-48/+32
plat-omap/devices.c Only OMAP1s are using omap_mcbsp_register_board_cfg after OMAP2+ hwmod conversion so it can be moved to mach-omap1/mcbsp.c. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-27ARM: OMAP: mcbsp: Remove unused variables from platform dataJarkko Nikula1-7/+0
These variables got unused after McBSP was converted to use resource structures. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-23Merge branch 'for_3.2/pm-cleanup' of ↵Tony Lindgren3-40/+11
git://gitorious.org/khilman/linux-omap-pm into cleanup
2011-09-23Merge branch 'for_3.2/omap_device' of ↵Tony Lindgren240-1119/+2213
git://gitorious.org/khilman/linux-omap-pm into cleanup
2011-09-21ARM: 7082/1: platform_device: pdev_archdata: add omap_device pointerKevin Hilman1-0/+5
Add omap_device pointer to the ARM-specific arch data in the platform_device. This will be used to attach OMAP-specific device-data to the platform device with device lifetime. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-21ARM: OMAP2+: Fix missing inline functions for Makefile cleanupTony Lindgren2-5/+19
Commit f41caddbe73f52a42f529d668ce47b4d693fd2c0 (omap2+: Use Kconfig symbol in Makefile instead of obj-y) cleaned up the omap2+ Makefile. However this did not account for the inline functions that are now needed for board_flash_init and board_nand_init. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-16OMAP3: PM: fix UART handling when using no_console_suspendKevin Hilman1-1/+1
During the idle/suspend path, we expect the console lock to be held so that no console output is done during/after the UARTs are idled. However, when using the no_console_suspend argument on the command-line, the console driver does not take the console lock. This allows the possibility of console activity after UARTs have been disabled. To fix, update the current is_suspending() to also check the console_suspend_enabled flag. Reported-by: Abhilash Koyamangalath <abhilash.kv@ti.com> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-16OMAP: omap_device: decouple platform_device from omap_deviceKevin Hilman3-51/+58
Rather than embedding a struct platform_device inside a struct omap_device, decouple them, leaving only a pointer to the platform_device inside the omap_device. Use the arch-specific data field of the platform_device (pdev_archdata) to add an omap_device pointer after the platform_device has been created. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-16OMAP: omap_device: _disable_idle_on_suspend() takes platform_device pointerKevin Hilman3-7/+10
Public omap_device functions need to take platform_device pointers, conversion to omap_device pointers is done internal to the omap_device layer. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-16OMAP: omap_device: device register functions now take platform_device pointerKevin Hilman1-11/+11
The internal device register functions do not need or use any omap_device internals, so pass in a platform_device pointer instead of an omap_device pointer. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-16OMAP: omap_device: when building return platform_device instead of omap_deviceKevin Hilman13-71/+71
All of the device init and device driver interaction with omap_device is done using platform_device pointers. To make this more explicit, have omap_device return a platform_device pointer instead of an omap_device pointer. All current users of the omap_device pointer were only using it to get at the platform_device pointer or struct device pointer, so fixing all of the users was trivial. This also makes it more difficult for device init code to directly access members of struct omap_device, and allows for easier changing of omap_device internals. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-16OMAP: omap_device: remove internal functions from omap_device.hKevin Hilman2-10/+8
The *_device_register() functions and the count/fill resources functions are internal to omap_device and do not need to be in the header. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-16OMAP: omap_device: make latency autoadjust messages debugGrazvydas Ignotas1-8/+8
During normal system operation warning messages similar to this are appearing quite often: omap_device: omap4-keypad.-1: new worst case activate latency 0: 61035 This doesn't seem to be reporting a problem, nor is it very useful for non-developers, so reduce it to debug level. Acked-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-16OMAP: omap_device: replace debug/warning/error prints with dev_* macrosKevin Hilman1-43/+42
For consistency in kernel printk output for devices, use dev_dbg(), dev_warn(), dev_err() instead of pr_debug(), pr_warning() and pr_err(), some of which currently use direct access of name from platform_device and others of which use dev_name(). Using the dev_* versions uses the standard device naming from the driver core. Some pr_* prints were not converted with this patch since they are used before the platform_device and struct device are created so neither the dev_* prints or dev_name() is valid. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-09-16omap: mcbsp: Remove omap device APIJarkko Nikula1-27/+0
struct omap_device *od is only set with find_omap_device_by_dev but not used otherwise so remove them and references to omap device API. Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
2011-09-16Merge branch 'omap_chip_remove_cleanup_3.2' of git://git.pwsan.com/linux-2.6 ↵Tony Lindgren373-3589/+4313
into cleanup
2011-09-15OMAP: id: remove OMAP_CHIP declarations, codePaul Walmsley3-119/+0
Now that all of the users of the OMAP_CHIP bitfield code have been converted to use lists, the OMAP_CHIP code, data, and declarations can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-09-15OMAP2+: hwmod: remove OMAP_CHIP*Paul Walmsley6-253/+85
At Tony's request, remove the OMAP_CHIP* flags from the hwmod data, and replace it instead with chip family, variant, and ES level-specific lists of hwmods to register. Thanks to Gražvydas Ignotas <notasas@gmail.com> for finding a bug in the AM3517/3505 support, and for other review comments. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Gražvydas Ignotas <notasas@gmail.com>
2011-09-15OMAP: powerdomain: remove omap_chip bitmasksPaul Walmsley8-96/+79
At Tony's request, remove the omap_chip bitmasks from the powerdomain definitions. Instead, initialize powerdomains based on one or more lists that are applicable to a particular SoC family, variant, and silicon revision. Gražvydas Ignotas <notasas@gmail.com> found and reported a bug in a related patch that also applied to this patch - thanks Gražvydas. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Gražvydas Ignotas <notasas@gmail.com>
2011-09-15OMAP: powerdomain: split pwrdm_init() into two functionsPaul Walmsley5-26/+74
In preparation for OMAP_CHIP() removal, split pwrdm_init() into three functions. This allows some of them to be called multiple times: for example, pwrdm_register_pwrdms() can be called once to register powerdomains that are common to a group of SoCs, and once to register powerdomains that are specific to a single SoC. The appropriate order to call these functions - which is enforced by the code - is: 1. pwrdm_register_platform_funcs() 2. pwrdm_register_pwrdms() (can be called multiple times) 3. pwrdm_complete_init() Convert the OMAP2, 3, and 4 powerdomain init code to use these new functions. While here, improve documentation, and increase CodingStyle conformance by shortening some local variable names. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-09-15OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomainPaul Walmsley11-1156/+842
At Tony's request, remove the omap_chip bitmasks from the clockdomain and clockdomain dependency definitions. Instead, initialize clockdomains based on one or more lists that are applicable to a particular SoC family, variant, and silicon revision. Tony Lindgren <tony@atomide.com> found a bug in a previous version of this patch - thanks Tony. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2011-09-15OMAP: clockdomain: split clkdm_init()Paul Walmsley4-34/+121
In preparation for OMAP_CHIP() removal, split clkdm_init() into four functions. This allows some of them to be called multiple times: for example, clkdm_register_clkdms() can be called once to register clockdomains that are common to a group of SoCs, and once to register clockdomains that are specific to a single SoC. The appropriate order to call these functions - which is enforced by the code - is: 1. clkdm_register_platform_funcs() 2. clkdm_register_clkdms() (can be called multiple times) 3. clkdm_register_autodeps() (optional; deprecated) 4. clkdm_complete_init() Convert the OMAP2, 3, and 4 clockdomain init code to use these new functions. While here, improve documentation, and increase CodingStyle conformance by shortening some local variable names. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-09-15OMAP2+: id: remove OMAP_REVBITS_* macrosPaul Walmsley1-23/+10
The OMAP_REVBITS_* macros are just used as otherwise meaningless aliases for the numbers zero through five, so remove these macros. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
2011-09-15OMAP3: id: remove duplicate code for testing SoC ES levelPaul Walmsley1-57/+23
omap3_cpuinfo() contains essentially duplicated code from omap3_check_revision(), just for the purpose of determining the chip ES level. Set the cpu_rev char array pointer in omap3_check_revision() instead, and drop the now-useless code from omap3_cpuinfo(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
2011-09-15OMAP3: id: add fallthrough warning; fix some CodingStyle issuesPaul Walmsley1-5/+6
Emit a warning to the console in omap3_check_revision() if that code cannot determine what type of SoC the system is currently running on. Remove some extra whitespace, remove some duplicate code, and add an appropriate comment to a fallthrough case. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Hemant Pedanekar <hemantp@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
2011-09-15OMAP3: id: use explicit omap_revision codes for 3505/3517 ES levelsPaul Walmsley2-2/+11
Use explicit revision codes for OMAP/AM 3505/3517 ES levels, as the rest of the OMAP2+ SoCs do in mach-omap2/cpu.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Sanjeev Premi <premi@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
2011-09-15OMAP3: id: remove useless strcpy()sPaul Walmsley1-26/+22
omap3_cpuinfo() is filled with useless strcpy() calls; remove them. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Sanjeev Premi <premi@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
2011-09-14OMAP3: id: remove identification codes that only correspond to marketing namesPaul Walmsley3-22/+22
The OMAP3505/AM3505 appears to be based on the same silicon as the OMAP3517/AM3517, with some features disabled via eFuse bits. Follow the same practice as OMAP3430 and identify these devices internally as part of the OMAP3517/AM3517 family. The OMAP3503/3515/3525/3530 chips appear to be based on the same silicon as the OMAP3430, with some features disabled via eFuse bits. Identify these devices internally as part of the OMAP3430 family. Remove the old OMAP35XX_CLASS, which actually covered two very different chip families. The OMAP3503/3515/3525/3530 chips will now be covered by OMAP343X_CLASS, since the silicon appears to be identical. For the OMAP3517/AM3517 family, create a new class, OMAP3517_CLASS. Thanks to Tony Lindgren <tony@atomide.com> for some help with the second revision of this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Sanjeev Premi <premi@ti.com> Cc: Tony Lindgren <tony@atomide.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
2011-09-13Linux 3.1-rc6Linus Torvalds1-1/+1
2011-09-13Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds7-28/+66
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Remove duplicate "return" statement drm/nv04/crtc: Bail out if FB is not bound to crtc drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate drm/nouveau: fix oops on pre-semaphore hardware drm/nv50/crtc: Bail out if FB is not bound to crtc drm/radeon/kms: fix DP detect and EDID fetch for DP bridges
2011-09-12Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds18-18/+72
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc: ARM: CSR: add missing sentinels to of_device_id tables ARM: cns3xxx: Fix newly introduced warnings in the PCIe code ARM: cns3xxx: Fix compile error caused by hardware.h removed ARM: davinci: fix cache flush build error ARM: davinci: correct MDSTAT_STATE_MASK ARM: davinci: da850 EVM: read mac address from SPI flash OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[] OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain OMAP4: clock: fix compile warning OMAP4: clock: re-enable previous clockdomain enable/disable sequence OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup OMAP: powerdomains: Make all powerdomain target states as ON at init
2011-09-12ioctl: register LTTng ioctlMathieu Desnoyers1-0/+2
The LTTng 2.0 kernel tracer (stand-alone module package, available at http://lttng.org) uses the 0xF6 ioctl range for tracer control and transport operations. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-12Merge branch 'for-linus' of git://github.com/chrismason/linuxLinus Torvalds8-22/+62
* 'for-linus' of git://github.com/chrismason/linux: Btrfs: add dummy extent if dst offset excceeds file end in Btrfs: calc file extent num_bytes correctly in file clone btrfs: xattr: fix attribute removal Btrfs: fix wrong nbytes information of the inode Btrfs: fix the file extent gap when doing direct IO Btrfs: fix unclosed transaction handle in btrfs_cont_expand Btrfs: fix misuse of trans block rsv Btrfs: reset to appropriate block rsv after orphan operations Btrfs: skip locking if searching the commit root in csum lookup btrfs: fix warning in iput for bad-inode Btrfs: fix an oops when deleting snapshots
2011-09-12fuse: fix memory leakMiklos Szeredi1-4/+8
kmemleak is reporting that 32 bytes are being leaked by FUSE: unreferenced object 0xe373b270 (size 32): comm "fusermount", pid 1207, jiffies 4294707026 (age 2675.187s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<b05517d7>] kmemleak_alloc+0x27/0x50 [<b0196435>] kmem_cache_alloc+0xc5/0x180 [<b02455be>] fuse_alloc_forget+0x1e/0x20 [<b0245670>] fuse_alloc_inode+0xb0/0xd0 [<b01b1a8c>] alloc_inode+0x1c/0x80 [<b01b290f>] iget5_locked+0x8f/0x1a0 [<b0246022>] fuse_iget+0x72/0x1a0 [<b02461da>] fuse_get_root_inode+0x8a/0x90 [<b02465cf>] fuse_fill_super+0x3ef/0x590 [<b019e56f>] mount_nodev+0x3f/0x90 [<b0244e95>] fuse_mount+0x15/0x20 [<b019d1bc>] mount_fs+0x1c/0xc0 [<b01b5811>] vfs_kern_mount+0x41/0x90 [<b01b5af9>] do_kern_mount+0x39/0xd0 [<b01b7585>] do_mount+0x2e5/0x660 [<b01b7966>] sys_mount+0x66/0xa0 This leak report is consistent and happens once per boot on 3.1.0-rc5-dirty. This happens if a FORGET request is queued after the fuse device was released. Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-12fuse: fix flock breakageMiklos Szeredi1-0/+3
Commit 37fb3a30b4 ("fuse: fix flock") added in 3.1-rc4 caused flock() to fail with ENOSYS with the kernel ABI version 7.16 or earlier. Fix by falling back to testing FUSE_POSIX_LOCKS for ABI versions 7.16 and earlier. Reported-by: Martin Ziegler <ziegler@email.mathematik.uni-freiburg.de> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Martin Ziegler <ziegler@email.mathematik.uni-freiburg.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-12Merge branch 'for_3.1/pm-fixes-2' of ↵Arnd Bergmann1-0/+3
git://gitorious.org/khilman/linux-omap-pm into fixes
2011-09-12Merge branch 'sirf/fixes' into fixesArnd Bergmann4-0/+4
2011-09-12Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linusLinus Torvalds8-93/+49
* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus: [media] vp7045: fix buffer setup [media] nuvoton-cir: simplify raw IR sample handling [media] [Resend] viacam: Don't explode if pci_find_bus() returns NULL [media] v4l2: Fix documentation of the codec device controls [media] gspca - sonixj: Fix the darkness of sensor om6802 in 320x240 [media] gspca - sonixj: Fix wrong register mask for sensor om6802 [media] gspca - ov519: Fix LED inversion of some ov519 webcams [media] pwc: precedence bug in pwc_init_controls()
2011-09-12Merge branch 'for-linus' of git://openrisc.net/~jonas/linuxLinus Torvalds4-27/+96
* 'for-linus' of git://openrisc.net/~jonas/linux: Add missing DMA ops openrisc: don't use pt_regs in struct sigcontext
2011-09-11Btrfs: add dummy extent if dst offset excceeds file end inLi Zefan1-0/+6
You can see there's no file extent with range [0, 4096]. Check this by btrfsck: # btrfsck /dev/sda7 root 5 inode 258 errors 100 ... Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: calc file extent num_bytes correctly in file cloneLi Zefan1-3/+10
num_bytes should be 4096 not 12288. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11btrfs: xattr: fix attribute removalDavid Sterba1-0/+9
An attribute is not removed by 'setfattr -x attr file' and remains visible in attr list. This makes xfstests/062 pass again. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: fix wrong nbytes information of the inodeMiao Xie1-2/+2
If we write some data into the data hole of the file(no preallocation for this hole), Btrfs will allocate some disk space, and update nbytes of the inode, but the other element--disk_i_size needn't be updated. At this condition, we must update inode metadata though disk_i_size is not changed(btrfs_ordered_update_i_size() return 1). # mkfs.btrfs /dev/sdb1 # mount /dev/sdb1 /mnt # touch /mnt/a # truncate -s 856002 /mnt/a # dd if=/dev/zero of=/mnt/a bs=4K count=1 conv=nocreat,notrunc # umount /mnt # btrfsck /dev/sdb1 root 5 inode 257 errors 400 found 32768 bytes used err is 1 Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: fix the file extent gap when doing direct IOMiao Xie1-6/+10
When we write some data to the place that is beyond the end of the file in direct I/O mode, a data hole will be created. And Btrfs should insert a file extent item that point to this hole into the fs tree. But unfortunately Btrfs forgets doing it. The following is a simple way to reproduce it: # mkfs.btrfs /dev/sdc2 # mount /dev/sdc2 /test4 # touch /test4/a # dd if=/dev/zero of=/test4/a seek=8 count=1 bs=4K oflag=direct conv=nocreat,notrunc # umount /test4 # btrfsck /dev/sdc2 root 5 inode 257 errors 100 Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-18 04:59:08 +0300