summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-06-22usb: cdnsp: Fixed setting last_trb incorrectlyJing Leng1-8/+11
commit 5c7578c39c3fffe85b7d15ca1cf8cf7ac38ec0c1 upstream. When ZLP occurs in bulk transmission, currently cdnsp will set last_trb for the last two TRBs, it will trigger an error "ERROR Transfer event TRB DMA ptr not part of current TD ...". Fixes: e913aada0683 ("usb: cdnsp: Fixed issue with ZLP") Cc: stable <stable@kernel.org> Acked-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Jing Leng <jleng@ambarella.com> Link: https://lore.kernel.org/r/20220609021134.1606-1-3090101217@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22usb: dwc2: Fix memory leak in dwc2_hcd_initMiaoqian Lin1-1/+1
commit 3755278f078460b021cd0384562977bf2039a57a upstream. usb_create_hcd will alloc memory for hcd, and we should call usb_put_hcd to free it when platform_get_resource() fails to prevent memory leak. goto error2 label instead error1 to fix this. Fixes: 856e6e8e0f93 ("usb: dwc2: check return value after calling platform_get_resource()") Cc: stable <stable@kernel.org> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220530085413.44068-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22arm64: mm: Don't invalidate FROM_DEVICE buffers at start of DMA transferWill Deacon1-2/+0
commit c50f11c6196f45c92ca48b16a5071615d4ae0572 upstream. Invalidating the buffer memory in arch_sync_dma_for_device() for FROM_DEVICE transfers When using the streaming DMA API to map a buffer prior to inbound non-coherent DMA (i.e. DMA_FROM_DEVICE), we invalidate any dirty CPU cachelines so that they will not be written back during the transfer and corrupt the buffer contents written by the DMA. This, however, poses two potential problems: (1) If the DMA transfer does not write to every byte in the buffer, then the unwritten bytes will contain stale data once the transfer has completed. (2) If the buffer has a virtual alias in userspace, then stale data may be visible via this alias during the period between performing the cache invalidation and the DMA writes landing in memory. Address both of these issues by cleaning (aka writing-back) the dirty lines in arch_sync_dma_for_device(DMA_FROM_DEVICE) instead of discarding them using invalidation. Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220606152150.GA31568@willie-the-truck Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220610151228.4562-2-will@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22USB: serial: io_ti: add Agilent E5805A supportRobert Eckelmann2-0/+3
commit 908e698f2149c3d6a67d9ae15c75545a3f392559 upstream. Add support for Agilent E5805A (rebranded ION Edgeport/4) to io_ti. Signed-off-by: Robert Eckelmann <longnoserob@gmail.com> Link: https://lore.kernel.org/r/20220521230808.30931eca@octoberrain Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22USB: serial: option: add support for Cinterion MV31 with new baselineSlark Xiao1-0/+6
commit 158f7585bfcea4aae0ad4128d032a80fec550df1 upstream. Adding support for Cinterion device MV31 with Qualcomm new baseline. Use different PIDs to separate it from previous base line products. All interfaces settings keep same as previous. Below is test evidence: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b8 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B8 USB Mobile Broadband S: SerialNumber=90418e79 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b9 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B9 USB Mobile Broadband S: SerialNumber=90418e79 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option For PID 00b8, interface 3 is GNSS port which don't use serial driver. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220601034740.5438-1-slark_xiao@163.com [ johan: rename defines using a "2" infix ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22crypto: memneq - move into lib/Jason A. Donenfeld6-1/+7
commit abfed87e2a12bd246047d78c01d81eb9529f1d06 upstream. This is used by code that doesn't need CONFIG_CRYPTO, so move this into lib/ with a Kconfig option so that it can be selected by whatever needs it. This fixes a linker error Zheng pointed out when CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m: lib/crypto/curve25519-selftest.o: In function `curve25519_selftest': curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq' Reported-by: Zheng Bin <zhengbin13@huawei.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: stable@vger.kernel.org Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22comedi: vmk80xx: fix expression for tx buffer sizeIan Abbott1-1/+1
commit 242439f7e279d86b3f73b5de724bc67b2f8aeb07 upstream. The expression for setting the size of the allocated bulk TX buffer (`devpriv->usb_tx_buf`) is calling `usb_endpoint_maxp(devpriv->ep_rx)`, which is using the wrong endpoint (should be `devpriv->ep_tx`). Fix it. Fixes: a23461c47482 ("comedi: vmk80xx: fix transfer-buffer overflow") Cc: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 4.9+ Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20220607171819.4121-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22mei: me: add raptor lake point S DIDAlexander Usyskin2-0/+4
commit 3ed8c7d39cfef831fe508fc1308f146912fa72e6 upstream. Add Raptor (Point) Lake S device id. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20220606144225.282375-3-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22mei: hbm: drop capability response on early shutdownAlexander Usyskin1-1/+2
commit 68553650bc9c57c7e530c84e5b2945e9dfe1a560 upstream. Drop HBM responses also in the early shutdown phase where the usual traffic is allowed. Extend the rule that drop HBM responses received during the shutdown phase by also in MEI_DEV_POWERING_DOWN state. This resolves the stall if the driver is stopping in the middle of the link initialization or link reset. Drop the capabilities response on early shutdown. Fixes: 6d7163f2c49f ("mei: hbm: drop hbm responses on early shutdown") Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20220606144225.282375-2-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22i2c: mediatek: Fix an error handling path in mtk_i2c_probe()Christophe JAILLET1-2/+7
[ Upstream commit de87b603b0919e31578c8fa312a3541f1fb37e1c ] The clsk are prepared, enabled, then disabled. So if an error occurs after the disable step, they are still prepared. Add an error handling path to unprepare the clks in such a case, as already done in the .remove function. Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22i2c: designware: Use standard optional ref clock implementationSerge Semin2-5/+11
[ Upstream commit 27071b5cbca59d8e8f8750c199a6cbf8c9799963 ] Even though the DW I2C controller reference clock source is requested by the method devm_clk_get() with non-optional clock requirement the way the clock handler is used afterwards has a pure optional clock semantic (though in some circumstances we can get a warning about the clock missing printed in the system console). There is no point in reimplementing that functionality seeing the kernel clock framework already supports the optional interface from scratch. Thus let's convert the platform driver to using it. Note by providing this commit we get to fix two problems. The first one was introduced in commit c62ebb3d5f0d ("i2c: designware: Add support for an interface clock"). It causes not having the interface clock (pclk) enabled/disabled in case if the reference clock isn't provided. The second problem was first introduced in commit b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided"). Since that modification the deferred probe procedure has been unsupported in case if the interface clock isn't ready. Fixes: c62ebb3d5f0d ("i2c: designware: Add support for an interface clock") Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22sched: Fix balance_push() vs __sched_setscheduler()Peter Zijlstra2-3/+38
[ Upstream commit 04193d590b390ec7a0592630f46d559ec6564ba1 ] The purpose of balance_push() is to act as a filter on task selection in the case of CPU hotplug, specifically when taking the CPU out. It does this by (ab)using the balance callback infrastructure, with the express purpose of keeping all the unlikely/odd cases in a single place. In order to serve its purpose, the balance_push_callback needs to be (exclusively) on the callback list at all times (noting that the callback always places itself back on the list the moment it runs, also noting that when the CPU goes down, regular balancing concerns are moot, so ignoring them is fine). And here-in lies the problem, __sched_setscheduler()'s use of splice_balance_callbacks() takes the callbacks off the list across a lock-break, making it possible for, an interleaving, __schedule() to see an empty list and not get filtered. Fixes: ae7927023243 ("sched: Optimize finish_lock_switch()") Reported-by: Jing-Ting Wu <jing-ting.wu@mediatek.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Jing-Ting Wu <jing-ting.wu@mediatek.com> Link: https://lkml.kernel.org/r/20220519134706.GH2578@worktop.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22irqchip/realtek-rtl: Fix refcount leak in map_interruptsMiaoqian Lin1-1/+1
[ Upstream commit eff4780f83d0ae3e5b6c02ff5d999dc4c1c5c8ce ] of_find_node_by_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. This function doesn't call of_node_put() in error path. Call of_node_put() directly after of_property_read_u32() to cover both normal path and error path. Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-7-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitionsMiaoqian Lin1-1/+4
[ Upstream commit fa1ad9d4cc47ca2470cd904ad4519f05d7e43a2b ] of_find_node_by_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: e3825ba1af3a ("irqchip/gic-v3: Add support for partitioned PPIs") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-6-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitionsMiaoqian Lin1-1/+1
[ Upstream commit ec8401a429ffee34ccf38cebf3443f8d5ae6cb0d ] of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. When kcalloc fails, it missing of_node_put() and results in refcount leak. Fix this by goto out_put_node label. Fixes: 52085d3f2028 ("irqchip/gic-v3: Dynamically allocate PPI partition descriptors") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-5-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22irqchip/apple-aic: Fix refcount leak in aic_of_ic_initMiaoqian Lin1-0/+1
[ Upstream commit 3d45670fab3c25a7452721e4588cc95c51cda134 ] of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: a5e8801202b3 ("irqchip/apple-aic: Parse FIQ affinities from device-tree") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-4-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22irqchip/apple-aic: Fix refcount leak in build_fiq_affinityMiaoqian Lin1-0/+1
[ Upstream commit b1ac803f47cb1615468f35cf1ccb553c52087301 ] of_find_node_by_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: a5e8801202b3 ("irqchip/apple-aic: Parse FIQ affinities from device-tree") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-3-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22irqchip/gic/realview: Fix refcount leak in realview_gic_of_initMiaoqian Lin1-0/+1
[ Upstream commit f4b98e314888cc51486421bcf6d52852452ea48b ] of_find_matching_node_and_match() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 82b0a434b436 ("irqchip/gic/realview: Support more RealView DCC variants") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-2-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22i2c: npcm7xx: Add check for platform_driver_registerJiasheng Jiang1-2/+1
[ Upstream commit 6ba12b56b9b844b83ed54fb7ed59fb0eb41e4045 ] As platform_driver_register() could fail, it should be better to deal with the return value in order to maintain the code consisitency. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usageJosh Poimboeuf4-7/+20
[ Upstream commit 7b6c7a877cc616bc7dc9cd39646fe454acbed48b ] The file-wide OBJECT_FILES_NON_STANDARD annotation is used with CONFIG_FRAME_POINTER to tell objtool to skip the entire file when frame pointers are enabled. However that annotation is now deprecated because it doesn't work with IBT, where objtool runs on vmlinux.o instead of individual translation units. Instead, use more fine-grained function-specific annotations: - The 'save_mcount_regs' macro does funny things with the frame pointer. Use STACK_FRAME_NON_STANDARD_FP to tell objtool to ignore the functions using it. - The return_to_handler() "function" isn't actually a callable function. Instead of being called, it's returned to. The real return address isn't on the stack, so unwinding is already doomed no matter which unwinder is used. So just remove the STT_FUNC annotation, telling objtool to ignore it. That also removes the implicit ANNOTATE_NOENDBR, which now needs to be made explicit. Fixes the following warning: vmlinux.o: warning: objtool: __fentry__+0x16: return with modified stack frame Fixes: ed53a0d97192 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/b7a7a42fe306aca37826043dac89e113a1acdbac.1654268610.git.jpoimboe@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22faddr2line: Fix overlapping text section failures, the sequelJosh Poimboeuf1-11/+34
[ Upstream commit dcea997beed694cbd8705100ca1a6eb0d886de69 ] If a function lives in a section other than .text, but .text also exists in the object, faddr2line may wrongly assume .text. This can result in comically wrong output. For example: $ scripts/faddr2line vmlinux.o enter_from_user_mode+0x1c enter_from_user_mode+0x1c/0x30: find_next_bit at /home/jpoimboe/git/linux/./include/linux/find.h:40 (inlined by) perf_clear_dirty_counters at /home/jpoimboe/git/linux/arch/x86/events/core.c:2504 Fix it by passing the section name to addr2line, unless the object file is vmlinux, in which case the symbol table uses absolute addresses. Fixes: 1d1a0e7c5100 ("scripts/faddr2line: Fix overlapping text section failures") Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/7d25bc1408bd3a750ac26e60d2f2815a5f4a8363.1654130536.git.jpoimboe@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22block: Fix handling of offline queues in blk_mq_alloc_request_hctx()Bart Van Assche1-0/+2
[ Upstream commit 14dc7a18abbe4176f5626c13c333670da8e06aa1 ] This patch prevents that test nvme/004 triggers the following: UBSAN: array-index-out-of-bounds in block/blk-mq.h:135:9 index 512 is out of range for type 'long unsigned int [512]' Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x3b __ubsan_handle_out_of_bounds.cold+0x44/0x49 blk_mq_alloc_request_hctx+0x304/0x310 __nvme_submit_sync_cmd+0x70/0x200 [nvme_core] nvmf_connect_io_queue+0x23e/0x2a0 [nvme_fabrics] nvme_loop_connect_io_queues+0x8d/0xb0 [nvme_loop] nvme_loop_create_ctrl+0x58e/0x7d0 [nvme_loop] nvmf_create_ctrl+0x1d7/0x4d0 [nvme_fabrics] nvmf_dev_write+0xae/0x111 [nvme_fabrics] vfs_write+0x144/0x560 ksys_write+0xb7/0x140 __x64_sys_write+0x42/0x50 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Fixes: 20e4d8139319 ("blk-mq: simplify queue mapping & schedule with each possisble CPU") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220615210004.1031820-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22init: Initialize noop_backing_dev_info earlyJan Kara3-9/+6
[ Upstream commit 4bca7e80b6455772b4bf3f536dcbc19aac424d6a ] noop_backing_dev_info is used by superblocks of various pseudofilesystems such as kdevtmpfs. After commit 10e14073107d ("writeback: Fix inode->i_io_list not be protected by inode->i_lock error") this broke because __mark_inode_dirty() started to access more fields from noop_backing_dev_info and this led to crashes inside locked_inode_to_wb_and_lock_list() called from __mark_inode_dirty(). Fix the problem by initializing noop_backing_dev_info before the filesystems get mounted. Fixes: 10e14073107d ("writeback: Fix inode->i_io_list not be protected by inode->i_lock error") Reported-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reported-and-tested-by: Alexandru Elisei <alexandru.elisei@arm.com> Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22certs/blacklist_hashes.c: fix const confusion in certs blacklistMasahiro Yamada1-1/+1
[ Upstream commit 6a1c3767d82ed8233de1263aa7da81595e176087 ] This file fails to compile as follows: CC certs/blacklist_hashes.o certs/blacklist_hashes.c:4:1: error: ignoring attribute ‘section (".init.data")’ because it conflicts with previous ‘section (".init.rodata")’ [-Werror=attributes] 4 | const char __initdata *const blacklist_hashes[] = { | ^~~~~ In file included from certs/blacklist_hashes.c:2: certs/blacklist.h:5:38: note: previous declaration here 5 | extern const char __initconst *const blacklist_hashes[]; | ^~~~~~~~~~~~~~~~ Apply the same fix as commit 2be04df5668d ("certs/blacklist_nohashes.c: fix const confusion in certs blacklist"). Fixes: 734114f8782f ("KEYS: Add a system blacklist keyring") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Mickaël Salaün <mic@linux.microsoft.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22arm64: ftrace: consistently handle PLTs.Mark Rutland1-71/+66
[ Upstream commit a6253579977e4c6f7818eeb05bf2bc65678a7187 ] Sometimes it is necessary to use a PLT entry to call an ftrace trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(), with each having *almost* identical logic, but this is not handled by ftrace_modify_call() since its introduction in commit: 3b23e4991fb66f6d ("arm64: implement ftrace with regs") Due to this, if we ever were to call ftrace_modify_call() for a callsite which requires a PLT entry for a trampoline, then either: a) If the old addr requires a trampoline, ftrace_modify_call() will use an out-of-range address to generate the 'old' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm() and ftrace_modify_code(), and no instructions will be modified. As ftrace_modify_call() will return an error, this will result in subsequent internal ftrace errors. b) If the old addr does not require a trampoline, but the new addr does, ftrace_modify_call() will use an out-of-range address to generate the 'new' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace the 'old' branch with a BRK. This will result in a kernel panic when this BRK is later executed. Practically speaking, case (a) is vastly more likely than case (b), and typically this will result in internal ftrace errors that don't necessarily affect the rest of the system. This can be demonstrated with an out-of-tree test module which triggers ftrace_modify_call(), e.g. | # insmod test_ftrace.ko | test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024 | branch_imm_common: offset out of range | branch_imm_common: offset out of range | ------------[ ftrace bug ]------------ | ftrace failed to modify | [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace] | actual: 1d:00:00:94 | Updating ftrace call site to call a different ftrace function | ftrace record flags: e0000002 | (2) R | expected tramp: ffffb374ae42ed54 | ------------[ cut here ]------------ | WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0 | Modules linked in: test_ftrace(+) | CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13 | Hardware name: linux,dummy-virt (DT) | pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : ftrace_bug+0x280/0x2b0 | lr : ftrace_bug+0x280/0x2b0 | sp : ffff80000839ba00 | x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0 | x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000 | x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8 | x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff | x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4 | x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666 | x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8 | x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167 | x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022 | Call trace: | ftrace_bug+0x280/0x2b0 | ftrace_replace_code+0x98/0xa0 | ftrace_modify_all_code+0xe0/0x144 | arch_ftrace_update_code+0x14/0x20 | ftrace_startup+0xf8/0x1b0 | register_ftrace_function+0x38/0x90 | test_ftrace_init+0xd0/0x1000 [test_ftrace] | do_one_initcall+0x50/0x2b0 | do_init_module+0x50/0x1f0 | load_module+0x17c8/0x1d64 | __do_sys_finit_module+0xa8/0x100 | __arm64_sys_finit_module+0x2c/0x3c | invoke_syscall+0x50/0x120 | el0_svc_common.constprop.0+0xdc/0x100 | do_el0_svc+0x3c/0xd0 | el0_svc+0x34/0xb0 | el0t_64_sync_handler+0xbc/0x140 | el0t_64_sync+0x18c/0x190 | ---[ end trace 0000000000000000 ]--- We can solve this by consistently determining whether to use a PLT entry for an address. Note that since (the earlier) commit: f1a54ae9af0da4d7 ("arm64: module/ftrace: intialize PLT at load time") ... we can consistently determine the PLT address that a given callsite will use, and therefore ftrace_make_nop() does not need to skip validation when a PLT is in use. This patch factors the existing logic out of ftrace_make_call() and ftrace_make_nop() into a common ftrace_find_callable_addr() helper function, which is used by ftrace_make_call(), ftrace_make_nop(), and ftrace_modify_call(). In ftrace_make_nop() the patching is consistently validated by ftrace_modify_code() as we can always determine what the old instruction should have been. Fixes: 3b23e4991fb6 ("arm64: implement ftrace with regs") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Will Deacon <will@kernel.org> Tested-by: "Ivan T. Ivanov" <iivanov@suse.de> Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220614080944.1349146-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22arm64: ftrace: fix branch range checksMark Rutland1-2/+2
[ Upstream commit 3eefdf9d1e406f3da47470b2854347009ffcb6fa ] The branch range checks in ftrace_make_call() and ftrace_make_nop() are incorrect, erroneously permitting a forwards branch of 128M and erroneously rejecting a backwards branch of 128M. This is because both functions calculate the offset backwards, calculating the offset *from* the target *to* the branch, rather than the other way around as the later comparisons expect. If an out-of-range branch were erroeously permitted, this would later be rejected by aarch64_insn_gen_branch_imm() as branch_imm_common() checks the bounds correctly, resulting in warnings and the placement of a BRK instruction. Note that this can only happen for a forwards branch of exactly 128M, and so the caller would need to be exactly 128M bytes below the relevant ftrace trampoline. If an in-range branch were erroeously rejected, then: * For modules when CONFIG_ARM64_MODULE_PLTS=y, this would result in the use of a PLT entry, which is benign. Note that this is the common case, as this is selected by CONFIG_RANDOMIZE_BASE (and therefore RANDOMIZE_MODULE_REGION_FULL), which distributions typically seelct. This is also selected by CONFIG_ARM64_ERRATUM_843419. * For modules when CONFIG_ARM64_MODULE_PLTS=n, this would result in internal ftrace failures. * For core kernel text, this would result in internal ftrace failues. Note that for this to happen, the kernel text would need to be at least 128M bytes in size, and typical configurations are smaller tha this. Fix this by calculating the offset *from* the branch *to* the target in both functions. Fixes: f8af0b364e24 ("arm64: ftrace: don't validate branch via PLT in ftrace_make_nop()") Fixes: e71a4e1bebaf ("arm64: ftrace: add support for far branches to dynamic ftrace") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Will Deacon <will@kernel.org> Tested-by: "Ivan T. Ivanov" <iivanov@suse.de> Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220614080944.1349146-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsgDuoming Zhou1-5/+28
[ Upstream commit 219b51a6f040fa5367adadd7d58c4dda0896a01d ] The skb_recv_datagram() in ax25_recvmsg() will hold lock_sock and block until it receives a packet from the remote. If the client doesn`t connect to server and calls read() directly, it will not receive any packets forever. As a result, the deadlock will happen. The fail log caused by deadlock is shown below: [ 369.606973] INFO: task ax25_deadlock:157 blocked for more than 245 seconds. [ 369.608919] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 369.613058] Call Trace: [ 369.613315] <TASK> [ 369.614072] __schedule+0x2f9/0xb20 [ 369.615029] schedule+0x49/0xb0 [ 369.615734] __lock_sock+0x92/0x100 [ 369.616763] ? destroy_sched_domains_rcu+0x20/0x20 [ 369.617941] lock_sock_nested+0x6e/0x70 [ 369.618809] ax25_bind+0xaa/0x210 [ 369.619736] __sys_bind+0xca/0xf0 [ 369.620039] ? do_futex+0xae/0x1b0 [ 369.620387] ? __x64_sys_futex+0x7c/0x1c0 [ 369.620601] ? fpregs_assert_state_consistent+0x19/0x40 [ 369.620613] __x64_sys_bind+0x11/0x20 [ 369.621791] do_syscall_64+0x3b/0x90 [ 369.622423] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 369.623319] RIP: 0033:0x7f43c8aa8af7 [ 369.624301] RSP: 002b:00007f43c8197ef8 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [ 369.625756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f43c8aa8af7 [ 369.626724] RDX: 0000000000000010 RSI: 000055768e2021d0 RDI: 0000000000000005 [ 369.628569] RBP: 00007f43c8197f00 R08: 0000000000000011 R09: 00007f43c8198700 [ 369.630208] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff845e6afe [ 369.632240] R13: 00007fff845e6aff R14: 00007f43c8197fc0 R15: 00007f43c8198700 This patch replaces skb_recv_datagram() with an open-coded variant of it releasing the socket lock before the __skb_wait_for_more_packets() call and re-acquiring it after such call in order that other functions that need socket lock could be executed. what's more, the socket lock will be released only when recvmsg() will block and that should produce nicer overall behavior. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Thomas Osterried <thomas@osterried.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reported-by: Thomas Habets <thomas@@habets.se> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22net: remove noblock parameter from skb_recv_datagram()Oliver Hartkopp37-70/+57
[ Upstream commit f4b41f062c424209e3939a81e6da022e049a45f2 ] skb_recv_datagram() has two parameters 'flags' and 'noblock' that are merged inside skb_recv_datagram() by 'flags | (noblock ? MSG_DONTWAIT : 0)' As 'flags' may contain MSG_DONTWAIT as value most callers split the 'flags' into 'flags' and 'noblock' with finally obsolete bit operations like this: skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &rc); And this is not even done consistently with the 'flags' parameter. This patch removes the obsolete and costly splitting into two parameters and only performs bit operations when really needed on the caller side. One missing conversion thankfully reported by kernel test robot. I missed to enable kunit tests to build the mctp code. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22net: bgmac: Fix an erroneous kfree() in bgmac_remove()Christophe JAILLET1-1/+0
[ Upstream commit d7dd6eccfbc95ac47a12396f84e7e1b361db654b ] 'bgmac' is part of a managed resource allocated with bgmac_alloc(). It should not be freed explicitly. Remove the erroneous kfree() from the .remove() function. Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22ice: Fix memory corruption in VF driverPrzemyslaw Patynowski1-0/+5
[ Upstream commit efe41860008e57fb6b69855b4b93fdf34bc42798 ] Disable VF's RX/TX queues, when it's disabled. VF can have queues enabled, when it requests a reset. If PF driver assumes that VF is disabled, while VF still has queues configured, VF may unmap DMA resources. In such scenario device still can map packets to memory, which ends up silently corrupting it. Previously, VF driver could experience memory corruption, which lead to crash: [ 5119.170157] BUG: unable to handle kernel paging request at 00001b9780003237 [ 5119.170166] PGD 0 P4D 0 [ 5119.170173] Oops: 0002 [#1] PREEMPT_RT SMP PTI [ 5119.170181] CPU: 30 PID: 427592 Comm: kworker/u96:2 Kdump: loaded Tainted: G W I --------- - - 4.18.0-372.9.1.rt7.166.el8.x86_64 #1 [ 5119.170189] Hardware name: Dell Inc. PowerEdge R740/014X06, BIOS 2.3.10 08/15/2019 [ 5119.170193] Workqueue: iavf iavf_adminq_task [iavf] [ 5119.170219] RIP: 0010:__page_frag_cache_drain+0x5/0x30 [ 5119.170238] Code: 0f 0f b6 77 51 85 f6 74 07 31 d2 e9 05 df ff ff e9 90 fe ff ff 48 8b 05 49 db 33 01 eb b4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <f0> 29 77 34 74 01 c3 48 8b 07 f6 c4 80 74 0f 0f b6 77 51 85 f6 74 [ 5119.170244] RSP: 0018:ffffa43b0bdcfd78 EFLAGS: 00010282 [ 5119.170250] RAX: ffffffff896b3e40 RBX: ffff8fb282524000 RCX: 0000000000000002 [ 5119.170254] RDX: 0000000049000000 RSI: 0000000000000000 RDI: 00001b9780003203 [ 5119.170259] RBP: ffff8fb248217b00 R08: 0000000000000022 R09: 0000000000000009 [ 5119.170262] R10: 2b849d6300000000 R11: 0000000000000020 R12: 0000000000000000 [ 5119.170265] R13: 0000000000001000 R14: 0000000000000009 R15: 0000000000000000 [ 5119.170269] FS: 0000000000000000(0000) GS:ffff8fb1201c0000(0000) knlGS:0000000000000000 [ 5119.170274] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5119.170279] CR2: 00001b9780003237 CR3: 00000008f3e1a003 CR4: 00000000007726e0 [ 5119.170283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5119.170286] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5119.170290] PKRU: 55555554 [ 5119.170292] Call Trace: [ 5119.170298] iavf_clean_rx_ring+0xad/0x110 [iavf] [ 5119.170324] iavf_free_rx_resources+0xe/0x50 [iavf] [ 5119.170342] iavf_free_all_rx_resources.part.51+0x30/0x40 [iavf] [ 5119.170358] iavf_virtchnl_completion+0xd8a/0x15b0 [iavf] [ 5119.170377] ? iavf_clean_arq_element+0x210/0x280 [iavf] [ 5119.170397] iavf_adminq_task+0x126/0x2e0 [iavf] [ 5119.170416] process_one_work+0x18f/0x420 [ 5119.170429] worker_thread+0x30/0x370 [ 5119.170437] ? process_one_work+0x420/0x420 [ 5119.170445] kthread+0x151/0x170 [ 5119.170452] ? set_kthread_struct+0x40/0x40 [ 5119.170460] ret_from_fork+0x35/0x40 [ 5119.170477] Modules linked in: iavf sctp ip6_udp_tunnel udp_tunnel mlx4_en mlx4_core nfp tls vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support dell_smbios wmi_bmof dell_wmi_descriptor dcdbas kvm_intel kvm irqbypass intel_rapl_common isst_if_common skx_edac irdma nfit libnvdimm x86_pkg_temp_thermal i40e intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ib_uverbs rapl ipmi_ssif intel_cstate intel_uncore mei_me pcspkr acpi_ipmi ib_core mei lpc_ich i2c_i801 ipmi_si ipmi_devintf wmi ipmi_msghandler acpi_power_meter xfs libcrc32c sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ice ahci drm libahci crc32c_intel libata tg3 megaraid_sas [ 5119.170613] i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod fuse [last unloaded: iavf] [ 5119.170627] CR2: 00001b9780003237 Fixes: ec4f5a436bdf ("ice: Check if VF is disabled for Opcode and other operations") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Co-developed-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22ice: Fix queue config fail handlingPrzemyslaw Patynowski1-27/+26
[ Upstream commit be2af71496a54a7195ac62caba6fab49cfe5006c ] Disable VF's RX/TX queues, when VIRTCHNL_OP_CONFIG_VSI_QUEUES fail. Not disabling them might lead to scenario, where PF driver leaves VF queues enabled, when VF's VSI failed queue config. In this scenario VF should not have RX/TX queues enabled. If PF failed to set up VF's queues, VF will reset due to TX timeouts in VF driver. Initialize iterator 'i' to -1, so if error happens prior to configuring queues then error path code will not disable queue 0. Loop that configures queues will is using same iterator, so error path code will only disable queues that were configured. Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Suggested-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22ice: Sync VLAN filtering features for DVMRoman Storozhenko1-18/+31
[ Upstream commit 9542ef4fba8c73e176b8aa18a8adf04aecb889e5 ] VLAN filtering features, that is C-Tag and S-Tag, in DVM mode must be both enabled or disabled. In case of turning off/on only one of the features, another feature must be turned off/on automatically with issuing an appropriate message to the kernel log. Fixes: 1babaf77f49d ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev") Signed-off-by: Roman Storozhenko <roman.storozhenko@intel.com> Co-developed-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22ice: Fix PTP TX timestamp offset calculationMichal Michalik2-1/+32
[ Upstream commit 71a579f0d3777a704355e6f1572dfba92a9b58b2 ] The offset was being incorrectly calculated for E822 - that led to collisions in choosing TX timestamp register location when more than one port was trying to use timestamping mechanism. In E822 one quad is being logically split between ports, so quad 0 is having trackers for ports 0-3, quad 1 ports 4-7 etc. Each port should have separate memory location for tracking timestamps. Due to error for example ports 1 and 2 had been assigned to quad 0 with same offset (0), while port 1 should have offset 0 and 1 offset 16. Fix it by correctly calculating quad offset. Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support") Signed-off-by: Michal Michalik <michal.michalik@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22mlxsw: spectrum_cnt: Reorder counter poolsPetr Machata1-1/+1
[ Upstream commit 4b7a632ac4e7101ceefee8484d5c2ca505d347b3 ] Both RIF and ACL flow counters use a 24-bit SW-managed counter address to communicate which counter they want to bind. In a number of Spectrum FW releases, binding a RIF counter is broken and slices the counter index to 16 bits. As a result, on Spectrum-2 and above, no more than about 410 RIF counters can be effectively used. This translates to 205 netdevices for which L3 HW stats can be enabled. (This does not happen on Spectrum-1, because there are fewer counters available overall and the counter index never exceeds 16 bits.) Binding counters to ACLs does not have this issue. Therefore reorder the counter allocation scheme so that RIF counters come first and therefore get lower indices that are below the 16-bit barrier. Fixes: 98e60dce4da1 ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22nvme: add device name to warning in uuid_show()Thomas Weißschuh1-2/+2
[ Upstream commit 1fc766b5c08417248e0008bca14c3572ac0f1c26 ] This provides more context to users. Old message: [ 00.000000] No UUID available providing old NGUID New message: [ 00.000000] block nvme0n1: No UUID available providing old NGUID Fixes: d934f9848a77 ("nvme: provide UUID value to userspace") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22net: hns3: fix tm port shapping of fibre port is incorrect after driver ↵Guangbin Huang3-4/+10
initialization [ Upstream commit 12a3670887725df364cc3e030cf3bede6f13b364 ] Currently in driver initialization process, driver will set shapping parameters of tm port to default speed read from firmware. However, the speed of SFP module may not be default speed, so shapping parameters of tm port may be incorrect. To fix this problem, driver sets new shapping parameters for tm port after getting exact speed of SFP module in this case. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22net: hns3: fix PF rss size initialization bugJie Wang1-1/+3
[ Upstream commit 71b215f36dca1a3d5d1c576b2099e6d7ea03047e ] Currently hns3 driver misuses the VF rss size to initialize the PF rss size in hclge_tm_vport_tc_info_update. So this patch fix it by checking the vport id before initialization. Fixes: 7347255ea389 ("net: hns3: refactor PF rss get APIs with new common rss get APIs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22net: hns3: restore tm priority/qset to default settings when tc disabledGuangbin Huang2-31/+65
[ Upstream commit e93530ae0e5d8fcf2d908933d206e0c93bc3c09b ] Currently, settings parameters of schedule mode, dwrr, shaper of tm priority or qset of one tc are only be set when tc is enabled, they are not restored to the default settings when tc is disabled. It confuses users when they cat tm_priority or tm_qset files of debugfs. So this patch fixes it. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22net: hns3: don't push link state to VF if unaliveJian Shen1-0/+6
[ Upstream commit 283847e3ef6dbf79bf67083b5ce7b8033e8b6f34 ] It's unnecessary to push link state to unalive VF, and the VF will query link state from PF when it being start works. Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22net: hns3: set port base vlan tbl_sta to false before removing old vlanGuangbin Huang1-0/+1
[ Upstream commit 9eda7d8bcbdb6909f202edeedff51948f1cad1e5 ] When modify port base vlan, the port base vlan tbl_sta needs to set to false before removing old vlan, to indicate this operation is not finish. Fixes: c0f46de30c96 ("net: hns3: fix port base vlan add fail when concurrent with reset") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22drm/i915/reset: Fix error_state_read ptr + offset useAlan Previn1-3/+12
[ Upstream commit c9b576d0c7bf55aeae1a736da7974fa202c4394d ] Fix our pointer offset usage in error_state_read when there is no i915_gpu_coredump but buf offset is non-zero. This fixes a kernel page fault can happen when multiple tests are running concurrently in a loop and one is producing engine resets and consuming the i915 error_state dump while the other is forcing full GT resets. (takes a while to trigger). The dmesg call trace: [ 5590.803000] BUG: unable to handle page fault for address: ffffffffa0b0e000 [ 5590.803009] #PF: supervisor read access in kernel mode [ 5590.803013] #PF: error_code(0x0000) - not-present page [ 5590.803016] PGD 5814067 P4D 5814067 PUD 5815063 PMD 109de4067 PTE 0 [ 5590.803022] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5590.803026] CPU: 5 PID: 13656 Comm: i915_hangman Tainted: G U 5.17.0-rc5-ups69-guc-err-capt-rev6+ #136 [ 5590.803033] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-M LP4x RVP, BIOS ADLPFWI1.R00. 3031.A02.2201171222 01/17/2022 [ 5590.803039] RIP: 0010:memcpy_erms+0x6/0x10 [ 5590.803045] Code: fe ff ff cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe [ 5590.803054] RSP: 0018:ffffc90003a8fdf0 EFLAGS: 00010282 [ 5590.803057] RAX: ffff888107ee9000 RBX: ffff888108cb1a00 RCX: 0000000000000f8f [ 5590.803061] RDX: 0000000000001000 RSI: ffffffffa0b0e000 RDI: ffff888107ee9071 [ 5590.803065] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 5590.803069] R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000019 [ 5590.803073] R13: 0000000000174fff R14: 0000000000001000 R15: ffff888107ee9000 [ 5590.803077] FS: 00007f62a99bee80(0000) GS:ffff88849f880000(0000) knlGS:0000000000000000 [ 5590.803082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5590.803085] CR2: ffffffffa0b0e000 CR3: 000000010a1a8004 CR4: 0000000000770ee0 [ 5590.803089] PKRU: 55555554 [ 5590.803091] Call Trace: [ 5590.803093] <TASK> [ 5590.803096] error_state_read+0xa1/0xd0 [i915] [ 5590.803175] kernfs_fop_read_iter+0xb2/0x1b0 [ 5590.803180] new_sync_read+0x116/0x1a0 [ 5590.803185] vfs_read+0x114/0x1b0 [ 5590.803189] ksys_read+0x63/0xe0 [ 5590.803193] do_syscall_64+0x38/0xc0 [ 5590.803197] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 5590.803201] RIP: 0033:0x7f62aaea5912 [ 5590.803204] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 5a b9 0c 00 e8 05 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 5590.803213] RSP: 002b:00007fff5b659ae8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5590.803218] RAX: ffffffffffffffda RBX: 0000000000100000 RCX: 00007f62aaea5912 [ 5590.803221] RDX: 000000000008b000 RSI: 00007f62a8c4000f RDI: 0000000000000006 [ 5590.803225] RBP: 00007f62a8bcb00f R08: 0000000000200010 R09: 0000000000101000 [ 5590.803229] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000006 [ 5590.803233] R13: 0000000000075000 R14: 00007f62a8acb010 R15: 0000000000200000 [ 5590.803238] </TASK> [ 5590.803240] Modules linked in: i915 ttm drm_buddy drm_dp_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers nfnetlink br_netfilter overlay mei_pxp mei_hdcp x86_pkg_temp_thermal coretemp kvm_intel snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm mei_me mei fuse ip_tables x_tables crct10dif_pclmul e1000e crc32_pclmul ptp i2c_i801 ghash_clmulni_intel i2c_smbus pps_core [last unloa ded: ttm] [ 5590.803277] CR2: ffffffffa0b0e000 [ 5590.803280] ---[ end trace 0000000000000000 ]--- Fixes: 0e39037b3165 ("drm/i915: Cache the error string") Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220311004311.514198-2-alan.previn.teres.alexis@intel.com (cherry picked from commit 3304033a1e69cd81a2044b4422f0d7e593afb4e6) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22io_uring: fix races with buffer table unregisterPavel Begunkov1-0/+7
[ Upstream commit d11d31fc5d8a96f707facee0babdcffaafa38de2 ] Fixed buffer table quiesce might unlock ->uring_lock, potentially letting new requests to be submitted, don't allow those requests to use the table as they will race with unregistration. Reported-and-tested-by: van fantasy <g1042620637@gmail.com> Fixes: bd54b6fe3316ec ("io_uring: implement fixed buffers registration similar to fixed files") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22io_uring: fix races with file table unregisterPavel Begunkov1-0/+8
[ Upstream commit b0380bf6dad4601d92025841e2b7a135d566c6e3 ] Fixed file table quiesce might unlock ->uring_lock, potentially letting new requests to be submitted, don't allow those requests to use the table as they will race with unregistration. Reported-and-tested-by: van fantasy <g1042620637@gmail.com> Fixes: 05f3fb3c53975 ("io_uring: avoid ring quiesce for fixed file set unregister and update") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22riscv: dts: microchip: re-add pdma to mpfs device treeConor Dooley1-0/+9
[ Upstream commit 5e757deddd918edb8cb2fdb56eb79656ffc6dade ] PolarFire SoC /does/ have a SiFive pdma, despite what I suggested as a conflict resolution to Zong. Somehow the entry fell through the cracks between versions of my dt patches, so re-add it with Zong's updated compatible & dma-channels property. Fixes: c5094f371008 ("riscv: dts: microchip: refactor icicle kit device tree") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22misc: atmel-ssc: Fix IRQ check in ssc_probeMiaoqian Lin1-2/+2
[ Upstream commit 1c245358ce0b13669f6d1625f7a4e05c41f28980 ] platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example: int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; Fix the check of return value to catch errors correctly. Fixes: eb1f2930609b ("Driver for the Atmel on-chip SSC on AT32AP and AT91") Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220601123026.7119-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22tty: goldfish: Fix free_irq() on removeVincent Whitchurch1-1/+1
[ Upstream commit 499e13aac6c762e1e828172b0f0f5275651d6512 ] Pass the correct dev_id to free_irq() to fix this splat when the driver is unbound: WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq Trying to free already-free IRQ 65 Call Trace: warn_slowpath_fmt free_irq goldfish_tty_remove platform_remove device_remove device_release_driver_internal device_driver_detach unbind_store drv_attr_store ... Fixes: 465893e18878e119 ("tty: goldfish: support platform_device with id -1") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220609141704.1080024-1-vincent.whitchurch@axis.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22Drivers: hv: vmbus: Release cpu lock in error caseSaurabh Sengar1-0/+1
[ Upstream commit 656c5ba50b7172a0ea25dc1b37606bd51d01fe8d ] In case of invalid sub channel, release cpu lock before returning. Fixes: a949e86c0d780 ("Drivers: hv: vmbus: Resolve race between init_vp_index() and CPU hotplug") Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1654794996-13244-1-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22iavf: Fix issue with MAC address of VF shown as zeroMichal Wilczynski1-1/+1
[ Upstream commit 645603844270b69175899268be68b871295764fe ] After reinitialization of iavf, ice driver gets VIRTCHNL_OP_ADD_ETH_ADDR message with incorrectly set type of MAC address. Hardware address should have is_primary flag set as true. This way ice driver knows what it has to set as a MAC address. Check if the address is primary in iavf_add_filter function and set flag accordingly. To test set all-zero MAC on a VF. This triggers iavf re-initialization and VIRTCHNL_OP_ADD_ETH_ADDR message gets sent to PF. For example: ip link set dev ens785 vf 0 mac 00:00:00:00:00:00 This triggers re-initialization of iavf. New MAC should be assigned. Now check if MAC is non-zero: ip link show dev ens785 Fixes: a3e839d539e0 ("iavf: Add usage of new virtchnl format to set default MAC") Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22i40e: Fix call trace in setup_tx_descriptorsAleksandr Loktionov1-8/+17
[ Upstream commit fd5855e6b1358e816710afee68a1d2bc685176ca ] After PF reset and ethtool -t there was call trace in dmesg sometimes leading to panic. When there was some time, around 5 seconds, between reset and test there were no errors. Problem was that pf reset calls i40e_vsi_close in prep_for_reset and ethtool -t calls i40e_vsi_close in diag_test. If there was not enough time between those commands the second i40e_vsi_close starts before previous i40e_vsi_close was done which leads to crash. Add check to diag_test if pf is in reset and don't start offline tests if it is true. Add netif_info("testing failed") into unhappy path of i40e_diag_test() Fixes: e17bc411aea8 ("i40e: Disable offline diagnostics if VFs are enabled") Fixes: 510efb2682b3 ("i40e: Fix ethtool offline diagnostic with netqueues") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22i40e: Fix calculating the number of queue pairsGrzegorz Szczurek1-1/+1
[ Upstream commit 0bb050670ac90a167ecfa3f9590f92966c9a3677 ] If ADQ is enabled for a VF, then actual number of queue pair is a number of currently available traffic classes for this VF. Without this change the configuration of the Rx/Tx queues fails with error. Fixes: d29e0d233e0d ("i40e: missing input validation on VF message handling by the PF") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 02:29:52 +0300