summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-10-09Phonet: cleanup pipe enable socket optionRémi Denis-Courmont3-56/+34
The current code works like this: int garbage, status; socklen_t len = sizeof(status); /* enable pipe */ setsockopt(fd, SOL_PNPIPE, PNPIPE_ENABLE, &garbage, sizeof(garbage)); /* disable pipe */ setsockopt(fd, SOL_PNPIPE, PNPIPE_DISABLE, &garbage, sizeof(garbage)); /* get status */ getsockopt(fd, SOL_PNPIPE, PNPIPE_INQ, &status, &len); ...which does not follow the usual socket option pattern. This patch merges all three "options" into a single gettable&settable option, before Linux 2.6.37 gets out: int status; socklen_t len = sizeof(status); /* enable pipe */ status = 1; setsockopt(fd, SOL_PNPIPE, PNPIPE_ENABLE, &status, sizeof(status)); /* disable pipe */ status = 0; setsockopt(fd, SOL_PNPIPE, PNPIPE_ENABLE, &status, sizeof(status)); /* get status */ getsockopt(fd, SOL_PNPIPE, PNPIPE_ENABLE, &status, &len); This also fixes the error code from EFAULT to ENOTCONN. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Cc: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09Phonet: advise against enabling the pipe controllerRémi Denis-Courmont1-1/+2
As it currently is, the new code path is not compatible with existing Nokia modems. This would break existing userspace for Nokia modem, such as the existing oFono ISI driver. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09Phonet: add to MAINTAINERS and add myselfRémi Denis-Courmont1-0/+8
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09qlcnic: update driver version 5.0.11Amit Kumar Salecha1-2/+2
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09qlcnic: change all P3 references to P3PSritej Velaga5-72/+72
This patch just rename all P3 #define to P3P. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09qlcnic: fix promiscous mode for VFRajesh Borundia3-3/+10
o Allow promiscous mode setting for VF's depending upon the configuration. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09qlcnic: fix board descriptionSritej Velaga1-1/+1
Remove "Flex-10" from board description. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09qlcnic: remove private LRO flagAmit Kumar Salecha3-9/+2
LRO was not getting enable after interface down/up. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09qlcnic: support quiescent modeAmit Kumar Salecha3-17/+74
Put device in quiescent mode during internal loopback test. Before running test, set state to NEED_QUISCENT. After getting ack from all function, change state to QUISCENT and perform test. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09qlcnic: driver private workqueueAmit Kumar Salecha1-1/+11
Currently fw recovery usage global workqueue. As same workqueue used by kernel for ethtool and etc., supporting quiescent mode is not possible, without driver private workqueue. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-09Merge branch 'for-davem' of ↵David S. Miller146-4191/+4231
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-10-08Merge branch 'master' of ↵John W. Linville146-4191/+4231
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ipw2x00/ipw2200.c
2010-10-08ipv4: Remove leftover rcu_read_unlock calls from __mkroute_output()Dimitris Michailidis1-4/+2
Commit "fib: RCU conversion of fib_lookup()" removed rcu_read_lock() from __mkroute_output but left a couple of calls to rcu_read_unlock() in there. This causes lockdep to complain that the rcu_read_unlock() call in __ip_route_output_key causes a lock inbalance and quickly crashes the kernel. The below fixes this for me. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08sfc: Don't try to set filters with search depths we know won't workBen Hutchings1-1/+10
The filter engine will time-out and ignore filters beyond 200-something hops. We also need to avoid infinite loops in efx_filter_search() when the table is full. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08net: Update kernel-doc for netif_set_real_num_rx_queues()Ben Hutchings1-2/+2
Synchronise the comment with the preceding implementation change. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07ath9k_hw: Fix hw reset failure with HTC driverRajkumar Manoharan1-4/+0
The following commit removed DISABLE_REGWRITE_BUFFER ops. The unnecessary REGWRITE_BUFFER_FLUSH was not removed properly which is causing failure on hw reset. Author: Felix Fietkau <nbd@openwrt.org> Date: Tue Oct 5 12:03:42 2010 +0200 ath9k_hw: clean up register write buffering Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07cfg80211: constify WDS addressJohannes Berg3-3/+3
There's no need for the WDS peer address to not be const, so make it const. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07nl80211: use new genl helpers for WDSJohannes Berg1-33/+12
Bill Jordan's patch to allow setting the WDS peer crossed with my patch removing all the boilerplate code in nl80211, and consequently he didn't make use of it yet. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07mac80211: fix sw scan lockingJohannes Berg1-2/+1
The recent scan overhaul broke locking because now we can jump to code that attempts to unlock, while we don't have the mutex held. Fix this by holding the mutex around all the relevant code. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07wl1271: Support FEM autodetectionJuuso Oikarinen1-4/+17
In the NVS/INI-parameters for the driver/firmware there is the FEM (front end module) selection option, which may configure the hardware FEM via autodetection or manual selection. So far, there has been support for manual selection only. Add support for FEM autodetection. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07Merge branch 'wireless-next-2.6' of ↵John W. Linville27-913/+661
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-10-07Merge branch 'master' of ↵John W. Linville1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-10-07Revert "mac80211: use netif_receive_skb in ieee80211_tx_status callpath"John W. Linville1-2/+2
This reverts commit 5ed3bc7288487bd4f891f420a07319e0b538b4fe. It turns-out that not all drivers are calling ieee80211_tx_status from a compatible context. Revert this for now and try again later... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07Revert "rtl8180: use NAPI for bottom-half processing"John W. Linville1-69/+59
This reverts commit 030725d2c7c1fafec7ede618647bf30ed79601f0. This commit relies on commit 5ed3bc7288487bd4f891f420a07319e0b538b4fe ("mac80211: use netif_receive_skb in ieee80211_tx_status callpath") Unfortunately not all drivers are calling ieee80211_tx_status from a compatible context, so that commit needs to be reverted in 2.6.36. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07ixgbe: Use affinity_hint when Flow Director is enabledPeter Waskiewicz2-0/+27
Use the new infrastructure to balance interrupts for flow alignment when ATR or Flow Director are enabled. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07drivers/net/stmmac/: add HAS_IOMEM dependencyMartin Schwidefsky1-1/+1
The stmmac driver does not compile on s390: drivers/net/stmmac/stmmac_main.c: In function 'stmmac_adjust_link': drivers/net/stmmac/stmmac_main.c:210: error: implicit declaration of function 'readl' drivers/net/stmmac/stmmac_main.c:263: error: implicit declaration of function 'writel' drivers/net/stmmac/stmmac_main.c: In function 'stmmac_dvr_probe': drivers/net/stmmac/stmmac_main.c:1674: error: implicit declaration of function 'ioremap' drivers/net/stmmac/stmmac_main.c:1674: warning: assignment makes pointer from integer without a cast drivers/net/stmmac/stmmac_main.c:1761: error: implicit declaration of function 'iounmap' make[3]: *** [drivers/net/stmmac/stmmac_main.o] Error 1 Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Giuseppe CAVALLARO <peppe.cavallaro@st.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07net: netif_set_real_num_rx_queues may cap num_rx_queues at init timeJohn Fastabend1-2/+0
Do not set num_rx_queues in netif_set_real_num_rx_queues() some drivers will increase the real_num_rx_queues later due to a feature changes or available interrupts increasing. By setting num_rx_queues here this ends up creating a cap on the number of rx queues available. For example the ixgbe driver sets the max number of queues it intends to use ever then sets the current number in use with the netif_set_num_{rx|tx}_queues calls. With the current implementation the number of rx queues gets limited so when a feature such as DCB or FCoE is enabled the queues are no longer available. kobjects will only be allocated for real_num_rx_queues so the waste in memory is minimal. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07eicon: make buffer largerDan Carpenter2-2/+2
In diva_mnt_add_xdi_adapter() we do this: strcpy (clients[id].drvName, tmp); strcpy (clients[id].Dbg.drvName, tmp); The "clients[id].drvName" is a 128 character buffer and "clients[id].Dbg.drvName" was originally a 16 character buffer but I've changed it to 128 as well. We don't actually use 128 characters but we do use more than 16. I've also changed the size of "tmp" to 128 characters instead of 256. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07dccp: Kill dead code and add static markers.stephen hemminger5-40/+25
Remove dead code and make some functions static. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07sundance: Drop legacy _COMPAT_WITH_OLD_KERNEL includesDenis Kirjanov1-7/+0
Drop legacy includes since 2.4.x Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07TCP: Fix setting of snd_ssthresh in tcp_mtu_probe_successJohn Heffner1-1/+1
This looks like a simple typo that has gone unnoticed for some time. The impact is relatively low but it's clearly wrong. Signed-off-by: John Heffner <johnwheffner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07Merge branch 'master' of ↵David S. Miller730-4301/+7823
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/pcmcia/pcnet_cs.c net/caif/caif_socket.c
2010-10-07Merge branch 'master' of ↵David S. Miller723-3979/+7368
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-10-07bonding: add Speed/Duplex information to /proc/net/bonding/bondKrzysztof Oledzki1-0/+2
Effect: Slave Interface: eth5 MII Status: up Speed: 10000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: XX:XX:XX:XX:XX:XX Slave queue ID: 0 Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07neigh: RCU conversion of struct neighbourEric Dumazet2-54/+88
This is the second step for neighbour RCU conversion. (first was commit d6bf7817 : RCU conversion of neigh hash table) neigh_lookup() becomes lockless, but still take a reference on found neighbour. (no more read_lock()/read_unlock() on tbl->lock) struct neighbour gets an additional rcu_head field and is freed after an RCU grace period. Future work would need to eventually not take a reference on neighbour for temporary dst (DST_NOCACHE), but this would need dst->_neighbour to use a noref bit like we did for skb->_dst. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07iwlagn: add define for MODULE_FIRMWAREWey-Yi Guy1-0/+1
Adding MODULE_FIRMWARE define for 130 series of devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlagn: fix module firmware name for 130 series deviceWey-Yi Guy1-2/+2
130 series device should use firmware name with 130 in it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07bonding: reread information about speed and duplex when interface goes upKrzysztof Piotr Oledzki1-0/+2
When an interface was enslaved when it was down, bonding thinks it has speed -1 even after it goes up. This leads into selecting a wrong active interface in active/backup mode on mixed 10G/1G or 1G/100M environment. before: bonding: bond0: link status definitely up for interface eth5, 100 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex. after: bonding: bond0: link status definitely up for interface eth5, 10000 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex. Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bonding: print information about speed and duplex seen by the driverKrzysztof Piotr Oledzki1-2/+3
before: bonding: bond0: link status definitely up for interface eth5 bonding: bond0: link status definitely up for interface eth0 after: bonding: bond0: link status definitely up for interface eth5, 100 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex. Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: update version to 1.60.00-1Dmitry Kravkov1-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: properly initialize FW statsDmitry Kravkov1-0/+13
Client statistics need to be initialized to -1 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: code beautifyDmitry Kravkov7-233/+318
This patch does not include any functional changes. The changes are: empty lines, indentation and comments. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x, cnic: Fix SPQ return creditDmitry Kravkov4-47/+91
Return proper L2 and L5 SPQ (slow path queue) credits. Previously, all SPQ events were counted as L5 types. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: move msix table initialization to probe()Dmitry Kravkov4-134/+228
Decide which interrupt mode to use (MSI-X, MSI, INTa) only once in probe() and initialize appropriate structures. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: use L1_CACHE_BYTES instead of magic numberDmitry Kravkov1-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: use proper constants for dma_unmap* callsDmitry Kravkov2-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: remove unused fields in main driver structureDmitry Kravkov1-7/+0
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: remove unused parameter in reuse_rx_skb()Dmitry Kravkov2-3/+3
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: Add 57712 supportDmitry Kravkov14-790/+3428
57712 HW supported with same set of features as for 57710/57711 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: change type of spq_left to atomicDmitry Kravkov3-13/+11
The field is now accessed from different contexts. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 11:44:56 +0300