summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-07-08drivers/virt: introduce Freescale hypervisor management driverTimur Tabi8-0/+1222
Add the drivers/virt directory, which houses drivers that support virtualization environments, and add the Freescale hypervisor management driver. The Freescale hypervisor management driver provides several services to drivers and applications related to the Freescale hypervisor: 1. An ioctl interface for querying and managing partitions 2. A file interface to reading incoming doorbells 3. An interrupt handler for shutting down the partition upon receiving the shutdown doorbell from a manager partition 4. A kernel interface for receiving callbacks when a managed partition shuts down. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-07powerpc/85xx: Add P5020 SoC device tree include stubKumar Gala2-570/+653
Split out common (non-board specific) parts of the SoC related device tree into a stub so multiple board dts files can include it and we can reduce duplication and maintenance effort. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-07powerpc/85xx: Add P3041 SoC device tree include stubKumar Gala2-578/+661
Split out common (non-board specific) parts of the SoC related device tree into a stub so multiple board dts files can include it and we can reduce duplication and maintenance effort. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-01powerpc: Use -mtraceback=noAnton Blanchard1-1/+1
gcc 4.7 will be more strict about parsing the -mtraceback option: gcc: error: unrecognized argument in option '-mtraceback=none' gcc: note: valid arguments to '-mtraceback=' are: full no part gcc used to do a 2 char compare so both "no" and "none" would match. Switch to using -mtraceback=no should work everywhere. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-01powerpc: Add jump label supportMichael Ellerman4-0/+72
This patch adds support for the new "jump label" feature. Unlike x86 and sparc we just merrily patch the code with no locks etc, as far as I know this is safe, but I'm not really sure what the x86/sparc code is protecting against so maybe it's not. I also don't see any reason for us to implement the poke_early() routine, even though sparc does. [BenH: Updated the patch to upstream generic changes] Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-01powerpc/hvsi: Fix conflict with old HVSI driverBenjamin Herrenschmidt3-43/+43
A mix of think & mismerge on my side caused a problem where both the new hvsi_lib and the old hvsi driver gets compiled and try to define symbols with the same name. This fixes it by renaming the hvsi_lib exported symbols. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-01powerpc: Fix build problem with default ppc_md.progress commitBenjamin Herrenschmidt1-0/+2
a9c0f41b3a64955fd6f4e9d66ae1df1cbdee0cd0 breaks the build on some platforms. The extern declaration must be shielded against assembly. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-30powerpc: Add printk companion for ppc_md.progressDave Carroll3-1/+8
This patch adds a printk companion to replace the udbg progress function when initmem is freed. Suggested-by: Milton Miller <miltonm@bga.com> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Carroll <dcarroll@astekcorp.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-30powerpc: Move free_initmem to common codeDave Carroll4-51/+19
The free_initmem function is basically duplicated in mm/init_32, and init_64, and is moved to the common 32/64-bit mm/mem.c. All other sections except init were removed in v2.6.15 by 6c45ab992e4299c869fb26427944a8f8ea177024 (powerpc: Remove section free() and linker script bits), and therefore the bulk of the executed code is identical. This patch also removes updating ppc_md.progress to NULL in the powermac late_initcall. Suggested-by: Milton Miller <miltonm@bga.com> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Carroll <dcarroll@astekcorp.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-30Merge remote branch 'origin/master' into nextBenjamin Herrenschmidt815-4647/+10199
2011-06-30Merge branch 'drm-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: increase rom size for atrm method
2011-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-3/+3
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix operator precedence in shared descriptor allocation
2011-06-30drm/radeon/kms: increase rom size for atrm methodAlex Deucher1-1/+1
The vbios rom is >64k on a lot of modern asics. Increase the fetch size for atrm to make sure we don't miss part of a larger rom. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-30crypto: caam - fix operator precedence in shared descriptor allocationKim Phillips1-3/+3
setkey allocates 16 bytes (CAAM_CMD_SZ * DESC_AEAD_SHARED_TEXT_LEN) shy of what is needed to store the shared descriptor, resulting in memory corruption. Fix this. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-29Merge branch 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-5/+7
* 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86 emulator: fix %rip-relative addressing with immediate source operand
2011-06-29Merge branch 'i2c-for-linus' of ↵Linus Torvalds2-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c/pca954x: Initialize the mux to disconnected state i2c-taos-evm: Fix log messages
2011-06-29Merge branch 'merge' of ↵Linus Torvalds10-94/+105
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: arch/powerpc: use printk_ratelimited instead of printk_ratelimit powerpc/rtas-rtc: remove sideeffects of printk_ratelimit powerpc/pseries: remove duplicate SCSI_BNX2_ISCSI in pseries_defconfig powerpc/e500: fix breakage with fsl_rio_mcheck_exception powerpc/p1022ds: fix audio-related properties in the device tree powerpc/85xx: fix NAND_CMD_READID read bytes number
2011-06-29ahci: change 'masking port_map' printk to KERN_WARNING levelLinus Torvalds1-1/+1
It's not so much an error as a warning about normal Marvell crazines. So don't use KERN_ERR that ends up spamming the console even in quiet mode, it's not _that_ critical. Explained by Jeff: "Long explanation, it's a mess: Marvell took standard AHCI, and bastardized it to include a weird mode whereby PATA devices appear inside the AHCI DMA and interrupt infrastructure you're familiar with. So, PATA devices appear via pata_marvell driver, using basic legacy IDE programming interface. But SATA devices, which might also be attached to this chip, either work in under-performing mode or simply don't work at all (e.g. newer 6 Gbps devices or port multiplier attachments, NCQ, ...) On the other hand, 'ahci' driver loads and works with the chip's attached SATA devices quite beautifully, but is completely unable to drive any attached PATA devices, due to the Marvell-specific PATA-under-AHCI interface. The "masking port_map 0x7 -> 0x3" message is the ahci driver "hiding" the PATA port(s) from itself, making sure it will only drive the SATA ports it knows how to drive." Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-29i2c/pca954x: Initialize the mux to disconnected statePetri Gynther1-3/+4
pca954x power-on default is channel 0 connected. If multiple pca954x muxes are connected to the same physical I2C bus, the parent bus will see channel 0 devices behind both muxes by default. This is bad. Scenario: -- pca954x @ 0x70 -- ch 0 (I2C-bus-101) -- EEPROM @ 0x50 | I2C-bus-1 --- | -- pca954x @ 0x71 -- ch 0 (I2C-bus-111) -- EEPROM @ 0x50 1. Load I2C bus driver: creates I2C-bus-1 2. Load pca954x driver: creates virtual I2C-bus-101 and I2C-bus-111 3. Load eeprom driver 4. Try to read EEPROM @ 0x50 on I2C-bus-101. The transaction will also bleed onto I2C-bus-111 because pca954x @ 0x71 channel 0 is connected by default. Fix: Initialize pca954x to disconnected state in pca954x_probe() Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2011-06-29i2c-taos-evm: Fix log messagesJean Delvare1-4/+4
* Print all error and information messages even when debugging is disabled. * Don't use adapter device to log messages before it is ready. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2011-06-29powerpc/pseries: Move hvsi support into a libraryBenjamin Herrenschmidt4-385/+482
This will allow a different backend to share it Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/pseries: Re-implement HVSI as part of hvc_vioBenjamin Herrenschmidt11-227/+749
On pseries machines, consoles are provided by the hypervisor using a low level get_chars/put_chars type interface. However, this is really just a transport to the service processor which implements them either as "raw" console (networked consoles, HMC, ...) or as "hvsi" serial ports. The later is a simple packet protocol on top of the raw character interface that is supposed to convey additional "serial port" style semantics. In practice however, all it does is provide a way to read the CD line and set/clear our DTR line, that's it. We currently implement the "raw" protocol as an hvc console backend (/dev/hvcN) and the "hvsi" protocol using a separate tty driver (/dev/hvsi0). However this is quite impractical. The arbitrary difference between the two type of devices has been a major source of user (and distro) confusion. Additionally, there's an additional mini -hvsi implementation in the pseries platform code for our low level debug console and early boot kernel messages, which means code duplication, though that low level variant is impractical as it's incapable of doing the initial protocol negociation to establish the link to the FSP. This essentially replaces the dedicated hvsi driver and the platform udbg code completely by extending the existing hvc_vio backend used in "raw" mode so that: - It now supports HVSI as well - We add support for hvc backend providing tiocm{get,set} - It also provides a udbg interface for early debug and boot console This is overall less code, though this will only be obvious once we remove the old "hvsi" driver, which is still available for now. When the old driver is enabled, the new code still kicks in for the low level udbg console, replacing the old mini implementation in the platform code, it just doesn't provide the higher level "hvc" interface. In addition to producing generally simler code, this has several benefits over our current situation: - The user/distro only has to deal with /dev/hvcN for the hypervisor console, avoiding all sort of confusion that has plagued us in the past - The tty, kernel and low level debug console all use the same code base which supports the full protocol establishment process, thus the console is now available much earlier than it used to be with the old HVSI driver. The kernel console works much earlier and udbg is available much earlier too. Hackers can enable a hard coded very-early debug console as well that works with HVSI (previously that was only supported for the "raw" mode). I've tried to keep the same semantics as hvsi relative to how I react to things like CD changes, with some subtle differences though: - I clear DTR on close if HUPCL is set - Current hvsi triggers a hangup if it detects a up->down transition on CD (you can still open a console with CD down). My new implementation triggers a hangup if the link to the FSP is severed, and severs it upon detecting a up->down transition on CD. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/udbg: Register udbg console genericallyBenjamin Herrenschmidt2-2/+2
When CONFIG_PPC_EARLY_DEBUG is set, call register_early_udbg_console() early from generic code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/pseries: Factor HVSI header struct in packet definitionsBenjamin Herrenschmidt2-45/+37
Embed the struct hvsi_header in the various packet definitions rather than open coding it multiple times. Will help provide stronger type checking. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/hvsi: Move HVSI protocol definitions to a header fileBenjamin Herrenschmidt2-62/+69
This moves various HVSI protocol definitions from the hvsi.c driver to a header file that can be used later on by a udbg implementation Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/maple: Register CPC925 EDAC device on all boards with CPC925Dmitry Eremin-Solenikov1-22/+19
Currently Maple setup code creates cpc925_edac device only on Motorola ATCA-6101 blade. Make setup code check bridge revision and enable EDAC on all U3H bridges. Verified on Momentum MapleD (ppc970fx kit) board. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/pseries: Improve error code on reconfiguration notifier failureAkinobu Mita4-26/+12
Reconfiguration notifier call for device node may fail by several reasons, but it always assumes kmalloc failures. This enables reconfiguration notifier call chain to get the actual error code rather than -ENOMEM by converting all reconfiguration notifier calls to return encapsulate error code with notifier_from_errno(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/pseries: Introduce pSeries_reconfig_notify()Akinobu Mita3-19/+23
This introduces pSeries_reconfig_notify() as a just wrapper of blocking_notifier_call_chain() for pSeries_reconfig_chain. This is a preparation to improvement of error code on reconfiguration notifier failure. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/maple: Enable scom access functions on MapleDmitry Eremin-Solenikov1-2/+2
Enable functions used to access SCOM if PPC_MAPLE is defined: they are used by cpufreq driver to control hardware. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc: mem_init should call memblock_is_reserved with phys_addr_tBecky Bruce1-1/+2
This has been broken for a while but hasn't been an issue until now because nobody was reserving regions at high addresses. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc: Whitespace fix to include/asm/pgtable-ppc64.hBecky Bruce1-1/+2
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/book3e-64: use a separate TLB handler when linear map is boltedScott Wood4-34/+266
On MMUs such as FSL where we can guarantee the entire linear mapping is bolted, we don't need to worry about linear TLB misses. If on top of that we do a full table walk, we get rid of all recursive TLB faults, and can dispense with some state saving. This gains a few percent on TLB-miss-heavy workloads, and around 50% on a benchmark that had a high rate of virtual page table faults under the normal handler. While touching the EX_TLB layout, remove EX_TLB_MMUCR0, EX_TLB_SRR0, and EX_TLB_SRR1 as they're not used. [BenH: Fixed build with 64K pages (wsp config)] Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29KVM: x86 emulator: fix %rip-relative addressing with immediate source operandAvi Kivity1-5/+7
%rip-relative addressing is relative to the first byte of the next instruction, so we need to add %rip only after we've fetched any immediate bytes. Based on original patch by Li Xin <xin.li@intel.com>. Signed-off-by: Avi Kivity <avi@redhat.com> Acked-by: Li Xin <xin.li@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-29powerpc/book3e-64: Reraise doorbell when masked by soft-irq-disableScott Wood4-16/+21
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29arch/powerpc: use printk_ratelimited instead of printk_ratelimitChristian Dietrich5-57/+60
Since printk_ratelimit() shouldn't be used anymore (see comment in include/linux/printk.h), replace it with printk_ratelimited. Signed-off-by: Christian Dietrich <christian.dietrich@informatik.uni-erlangen.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/rtas-rtc: remove sideeffects of printk_ratelimitChristian Dietrich1-12/+17
Don't use printk_ratelimit() as an additional condition for returning on an error. Because when the ratelimit is reached, printk_ratelimit will return 0 and e.g. in rtas_get_boot_time won't check for an error condition. Signed-off-by: Christian Dietrich <christian.dietrich@informatik.uni-erlangen.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29Merge remote branch 'jwb/next' into nextBenjamin Herrenschmidt3-1/+24
2011-06-29powerpc/pseries: remove duplicate SCSI_BNX2_ISCSI in pseries_defconfigMichael Neuling1-1/+0
Remove duplicate assignment of SCSI_BNX2_ISCSI in pseries_defconfig introduced by: 37e0c21e powerpc/pseries: Enable iSCSI support for a number of cards causes warning: arch/powerpc/configs/pseries_defconfig:151:warning: override: reassigning to symbol SCSI_BNX2_ISCSI Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-28Merge branch 'drm-intel-fixes' of ↵Linus Torvalds4-85/+230
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Use chipset-specific irq installers drm/i915: forcewake fix after reset drm/i915: add Ivy Bridge page flip support drm/i915: split page flip queueing into per-chipset functions
2011-06-28Merge branch 'driver-core-linus' of ↵Linus Torvalds7-9/+18
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Connector: Correctly set the error code in case of success when dispatching receive callbacks Connector: Set the CN_NETLINK_USERS correctly pti: PTI semantics fix in pti_tty_cleanup. pti: ENXIO error case memory leak PTI fix. pti: double-free security PTI fix drivers:misc: ti-st: fix skipping of change remote baud drivers/base/platform.c: don't mark platform_device_register_resndata() as __init_or_module st_kim: Handle case of no device found for ID 0 firmware: fix GOOGLE_SMI kconfig dependency warning
2011-06-28Merge branch 'usb-linus' of ↵Linus Torvalds21-34/+164
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: MAINTAINERS: add myself as maintainer of USB/IP usb: r8a66597-hcd: fix cannot detect low/full speed device USB: ehci-ath79: fix a NULL pointer dereference USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c usb/isp1760: Fix bug preventing the unlinking of control urbs USB: Fix up URB error codes to reflect implementation. xhci: Always set urb->status to zero for isoc endpoints. xhci: Add reset on resume quirk for asrock p67 host xHCI 1.0: Incompatible Device Error USB: don't let errors prevent system sleep USB: don't let the hub driver prevent system sleep USB: change maintainership of ohci-hcd and ehci-hcd xHCI 1.0: Force Stopped Event(FSE) xhci: Don't warn about zeroed bMaxBurst descriptor field. USB: Free bandwidth when usb_disable_device is called. xhci: Reject double add of active endpoints. USB: TI 3410/5052 USB Serial Driver: Fix mem leak when firmware is too big. usb: musb: gadget: clear TXPKTRDY flag when set FLUSHFIFO usb: musb: host: compare status for negative error values
2011-06-28Merge branch 'tty-linus' of ↵Linus Torvalds14-19/+295
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: bcm63xx_uart: fix irq storm after rx fifo overrun. amba pl011: platform data for reg lockup and glitch v2 amba pl011: workaround for uart registers lockup tty: n_gsm: improper skb_pull() use was leaking framed data tty: n_gsm: Fixed logic to decode break signal from modem status TTY: ntty, add one more sanity check TTY: ldisc, do not close until there are readers 8250: Fix capabilities when changing the port type 8250_pci: Fix missing const from merges ARM: SAMSUNG: serial: Fix on handling of one clock source for UART serial: ioremap warning fix for jsm driver. 8250_pci: add -ENODEV code for Intel EG20T PCH
2011-06-28Merge branch 'staging-linus' of ↵Linus Torvalds9-11/+40
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: comedi: fix build breakages on some platforms Staging: brcm80211: disable drivers except for X86 or MIPS platforms Staging: brcm80211: disable drivers for PPC platforms Staging: iio: Make IIO depend on GENERIC_HARDIRQS Staging: mei: fix suspend failure Staging: fix iio builds when IIO_RING_BUFFER is not enabled Staging: Comedi: Build only on arches providing PAGE_KERNEL_NOCACHE Staging: fix more iio builds when IIO_RING_BUFFER is not enabled
2011-06-28Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds1-0/+1
* 'for-linus' of git://neil.brown.name/md: md: avoid endless recovery loop when waiting for fail device to complete.
2011-06-28drm/i915: Use chipset-specific irq installersChris Wilson1-2/+2
Konstantin Belousov pointed out that 4697995b98417 replaced the generic i915_driver_irq_*install() functions with chipset specific routines accessible only through driver->irq_*install(). So update the sanity check in i915_request_wait() to match. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-28drm/i915: forcewake fix after resetBen Widawsky1-0/+3
The failure is as follows: 1. Userspace gets forcewake lock, lock count >=1 2. GPU hang/reset occurs (forcewake bit is reset) 3. count is now incorrect The failure can only occur when using the forcewake userspace lock. This has the unfortunate consequence of messing up the driver as well as userspace, unless userspace closes the debugfs file, the kernel will never end up waking the GT since the refcount will be > 1. The solution is to try to recover the correct forcewake state based on the refcount. There is a period of time where userspace reads/writes may occur after the reset, before the GT has been forcewaked. The interface was never designed to be a perfect solution for userspace reads/writes, and the kernel portion is fixed by this patch. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-28proc: restrict access to /proc/PID/ioVasiliy Kulikov1-2/+5
/proc/PID/io may be used for gathering private information. E.g. for openssh and vsftpd daemons wchars/rchars may be used to learn the precise password length. Restrict it to processes being able to ptrace the target process. ptrace_may_access() is needed to prevent keeping open file descriptor of "io" file, executing setuid binary and gathering io information of the setuid'ed process. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28powerpc/4xx: Update Canyonlands and Glacier boards DTS to add HW RNG supportMike Williams2-1/+12
This will allow the new HW RNG driver to bind on these boards Signed-off-by: Mike Williams <mike@mikebwilliams.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2011-06-28ppc4xx: Add crypto and RNG entries to Sequoia DTSJosh Boyer1-0/+12
The Sequoia board has a Security function IP block on it that contains a TRNG. Add the crypto and rng portions of that IP block to the DTS. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2011-06-28md: avoid endless recovery loop when waiting for fail device to complete.NeilBrown1-0/+1
If a device fails in a way that causes pending request to take a while to complete, md will not be able to immediately remove it from the array in remove_and_add_spares. It will then incorrectly look like a spare device and md will try to recover it even though it is failed. This leads to a recovery process starting and instantly aborting over and over again. We should check if the device is faulty before considering it to be a spare. This will avoid trying to start a recovery that cannot proceed. This bug was introduced in 2.6.26 so that patch is suitable for any kernel since then. Cc: stable@kernel.org Reported-by: Jim Paradis <james.paradis@stratus.com> Signed-off-by: NeilBrown <neilb@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 13:07:06 +0300