summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-08-26ARM: software-based priviledged-no-access supportRussell King7-8/+125
Provide a software-based implementation of the priviledged no access support found in ARMv8.1. Userspace pages are mapped using a different domain number from the kernel and IO mappings. If we switch the user domain to "no access" when we enter the kernel, we can prevent the kernel from touching userspace. However, the kernel needs to be able to access userspace via the various user accessor functions. With the wrapping in the previous patch, we can temporarily enable access when the kernel needs user access, and re-disable it afterwards. This allows us to trap non-intended accesses to userspace, eg, caused by an inadvertent dereference of the LIST_POISON* values, which, with appropriate user mappings setup, can be made to succeed. This in turn can allow use-after-free bugs to be further exploited than would otherwise be possible. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-26ARM: entry: provide uaccess assembly macro hooksRussell King11-11/+55
Provide hooks into the kernel entry and exit paths to permit control of userspace visibility to the kernel. The intended use is: - on entry to kernel from user, uaccess_disable will be called to disable userspace visibility - on exit from kernel to user, uaccess_enable will be called to enable userspace visibility - on entry from a kernel exception, uaccess_save_and_disable will be called to save the current userspace visibility setting, and disable access - on exit from a kernel exception, uaccess_restore will be called to restore the userspace visibility as it was before the exception occurred. These hooks allows us to keep userspace visibility disabled for the vast majority of the kernel, except for localised regions where we want to explicitly access userspace. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-26ARM: entry: get rid of multiple macro definitionsRussell King1-65/+44
The following structure is just asking for trouble: #ifdef CONFIG_symbol .macro foo ... .endm .macro bar ... .endm .macro baz ... .endm #else .macro foo ... .endm .macro bar ... .endm #ifdef CONFIG_symbol2 .macro baz ... .endm #else .macro baz ... .endm #endif #endif such as one defintion being updated, but the other definitions miss out. Where the contents of a macro needs to be conditional, the hint is in the first clause of this very sentence. "contents" "conditional". Not multiple separate definitions, especially not when much of the macro is the same between different configs. This patch fixes this bad style, which had caused the Thumb2 code to miss-out on the uaccess updates. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-25ARM: uaccess: provide uaccess_save_and_enable() and uaccess_restore()Russell King7-21/+97
Provide uaccess_save_and_enable() and uaccess_restore() to permit control of userspace visibility to the kernel, and hook these into the appropriate places in the kernel where we need to access userspace. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-25ARM: mm: improve do_ldrd_abort macroRussell King4-11/+11
Improve the do_ldrd_abort macro code - firstly, it inefficiently checks for the LDRD encoding by doing a multi-stage test of various bits. This can be simplified by generating a mask, bitmasking the instruction and then comparing the result. Secondly, we want to be able to test the result rather than branching to do_DataAbort, so remove the branch at the end and rename the macro to 'teq_ldrd' to reflect it's new usage. teq_ldrd macro returns 'eq' if the instruction was a LDRD. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-21ARM: domains: remove DOMAIN_TABLERussell King1-3/+0
DOMAIN_TABLE is not used; in any case, it aliases to the kernel domain. Remove this definition. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-21ARM: domains: keep vectors in separate domainRussell King4-3/+16
Keep the machine vectors in its own domain to avoid software based user access control from making the vector code inaccessible, and thereby deadlocking the machine. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-21ARM: domains: get rid of manager mode for user domainRussell King2-2/+1
Since we switched to early trap initialisation in 94e5a85b3be0 ("ARM: earlier initialization of vectors page") we haven't been writing directly to the vectors page, and so there's no need for this domain to be in manager mode. Switch it to client mode. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-21ARM: domains: move initial domain setting value to asm/domains.hRussell King2-4/+7
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-21ARM: domains: provide domain_mask()Russell King1-2/+3
Provide a macro to generate the mask for a domain, rather than using domain_val(, DOMAIN_MANAGER) which won't work when CPU_USE_DOMAINS is turned off. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-21ARM: domains: switch to keeping domain value in registerRussell King4-11/+27
Rather than modifying both the domain access control register and our per-thread copy, modify only the domain access control register, and use the per-thread copy to save and restore the register over context switches. We can also avoid the explicit initialisation of the init thread_info structure. This allows us to avoid needing to gain access to the thread information at the uaccess control sites. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-07-05Linux 4.2-rc1Linus Torvalds1-2/+2
2015-07-05Merge tag 'platform-drivers-x86-v4.2-2' of ↵Linus Torvalds7-45/+1004
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull late x86 platform driver updates from Darren Hart: "The following came in a bit later and I wanted them to bake in next a few more days before submitting, thus the second pull. A new intel_pmc_ipc driver, a symmetrical allocation and free fix in dell-laptop, a couple minor fixes, and some updated documentation in the dell-laptop comments. intel_pmc_ipc: - Add Intel Apollo Lake PMC IPC driver tc1100-wmi: - Delete an unnecessary check before the function call "kfree" dell-laptop: - Fix allocating & freeing SMI buffer page - Show info about WiGig and UWB in debugfs - Update information about wireless control" * tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver tc1100-wmi: Delete an unnecessary check before the function call "kfree" dell-laptop: Fix allocating & freeing SMI buffer page dell-laptop: Show info about WiGig and UWB in debugfs dell-laptop: Update information about wireless control
2015-07-05Merge branch 'for-linus' of ↵Linus Torvalds99-553/+784
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted VFS fixes and related cleanups (IMO the most interesting in that part are f_path-related things and Eric's descriptor-related stuff). UFS regression fixes (it got broken last cycle). 9P fixes. fs-cache series, DAX patches, Jan's file_remove_suid() work" [ I'd say this is much more than "fixes and related cleanups". The file_table locking rule change by Eric Dumazet is a rather big and fundamental update even if the patch isn't huge. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits) 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation fs/file.c: __fget() and dup2() atomicity rules fs/file.c: don't acquire files->file_lock in fd_install() fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation vfs: avoid creation of inode number 0 in get_next_ino namei: make set_root_rcu() return void make simple_positive() public ufs: use dir_pages instead of ufs_dir_pages() pagemap.h: move dir_pages() over there remove the pointless include of lglock.h fs: cleanup slight list_entry abuse xfs: Correctly lock inode when removing suid and file capabilities fs: Call security_ops->inode_killpriv on truncate fs: Provide function telling whether file_remove_privs() will do anything ...
2015-07-05bluetooth: fix list handlingLinus Torvalds2-2/+3
Commit 835a6a2f8603 ("Bluetooth: Stop sabotaging list poisoning") thought that the code was sabotaging the list poisoning when NULL'ing out the list pointers and removed it. But what was going on was that the bluetooth code was using NULL pointers for the list as a way to mark it empty, and that commit just broke it (and replaced the test with NULL with a "list_empty()" test on a uninitialized list instead, breaking things even further). So fix it all up to use the regular and real list_empty() handling (which does not use NULL, but a pointer to itself), also making sure to initialize the list properly (the previous NULL case was initialized implicitly by the session being allocated with kzalloc()) This is a combination of patches by Marcel Holtmann and Tedd Ho-Jeong An. [ I would normally expect to get this through the bt tree, but I'm going to release -rc1, so I'm just committing this directly - Linus ] Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Original-by: Tedd Ho-Jeong An <tedd.an@intel.com> Original-by: Marcel Holtmann <marcel@holtmann.org>: Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-05Merge branch 'for-next' of ↵Linus Torvalds68-6312/+3163
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "It's been a busy development cycle for target-core in a number of different areas. The fabric API usage for se_node_acl allocation is now within target-core code, dropping the external API callers for all fabric drivers tree-wide. There is a new conversion to RCU hlists for se_node_acl and se_portal_group LUN mappings, that turns fast-past LUN lookup into a completely lockless code-path. It also removes the original hard-coded limitation of 256 LUNs per fabric endpoint. The configfs attributes for backends can now be shared between core and driver code, allowing existing drivers to use common code while still allowing flexibility for new backend provided attributes. The highlights include: - Merge sbc_verify_dif_* into common code (sagi) - Remove iscsi-target support for obsolete IFMarker/OFMarker (Christophe Vu-Brugier) - Add bidi support in target/user backend (ilias + vangelis + agover) - Move se_node_acl allocation into target-core code (hch) - Add crc_t10dif_update common helper (akinobu + mkp) - Handle target-core odd SGL mapping for data transfer memory (akinobu) - Move transport ID handling into target-core (hch) - Move task tag into struct se_cmd + support 64-bit tags (bart) - Convert se_node_acl->device_list[] to RCU hlist (nab + hch + paulmck) - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch + paulmck) - Simplify target backend driver registration (hch) - Consolidate + simplify target backend attribute implementations (hch + nab) - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch) - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab) - Drop unnecessary core_tpg_register TFO parameter (nab) - Use 64-bit LUNs tree-wide (hannes) - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits) target: Bump core version to v5.0 target: remove target_core_configfs.h target: remove unused TARGET_CORE_CONFIG_ROOT define target: consolidate version defines target: implement WRITE_SAME with UNMAP bit using ->execute_unmap target: simplify UNMAP handling target: replace se_cmd->execute_rw with a protocol_data field target/user: Fix inconsistent kmap_atomic/kunmap_atomic target: Send UA when changing LUN inventory target: Send UA upon LUN RESET tmr completion target: Send UA on ALUA target port group change target: Convert se_lun->lun_deve_lock to normal spinlock target: use 'se_dev_entry' when allocating UAs target: Remove 'ua_nacl' pointer from se_ua structure target_core_alua: Correct UA handling when switching states xen-scsiback: Fix compile warning for 64-bit LUN target: Remove TARGET_MAX_LUNS_PER_TRANSPORT target: use 64-bit LUNs target: Drop duplicate + unused se_dev_check_wce target: Drop unnecessary core_tpg_register TFO parameter ...
2015-07-05Merge tag 'ntb-4.2' of git://github.com/jonmason/ntbLinus Torvalds23-2816/+5545
Pull NTB updates from Jon Mason: "This includes a pretty significant reworking of the NTB core code, but has already produced some significant performance improvements. An abstraction layer was added to allow the hardware and clients to be easily added. This required rewriting the NTB transport layer for this abstraction layer. This modification will allow future "high performance" NTB clients. In addition to this change, a number of performance modifications were added. These changes include NUMA enablement, using CPU memcpy instead of asyncdma, and modification of NTB layer MTU size" * tag 'ntb-4.2' of git://github.com/jonmason/ntb: (22 commits) NTB: Add split BAR output for debugfs stats NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe NTB: Print driver name and version in module init NTB: Increase transport MTU to 64k from 16k NTB: Rename Intel code names to platform names NTB: Default to CPU memcpy for performance NTB: Improve performance with write combining NTB: Use NUMA memory in Intel driver NTB: Use NUMA memory and DMA chan in transport NTB: Rate limit ntb_qp_link_work NTB: Add tool test client NTB: Add ping pong test client NTB: Add parameters for Intel SNB B2B addresses NTB: Reset transport QP link stats on down NTB: Do not advance transport RX on link down NTB: Differentiate transport link down messages NTB: Check the device ID to set errata flags NTB: Enable link for Intel root port mode in probe NTB: Read peer info from local SPAD in transport NTB: Split ntb_hw_intel and ntb_transport drivers ...
2015-07-049p: cope with bogus responses from server in p9_client_{read,write}Al Viro1-0/+8
if server claims to have written/read more than we'd told it to, warn and cap the claimed byte count to avoid advancing more than we are ready to.
2015-07-04p9_client_write(): avoid double p9_free_req()Al Viro1-0/+1
Braino in "9p: switch p9_client_write() to passing it struct iov_iter *"; if response is impossible to parse and we discard the request, get the out of the loop right there. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-049p: forgetting to cancel request on interrupted zero-copy RPCAl Viro1-1/+2
If we'd already sent a request and decide to abort it, we *must* issue TFLUSH properly and not just blindly reuse the tag, or we'll get seriously screwed when response eventually arrives and we confuse it for response to later request that had reused the same tag. Cc: stable@vger.kernel.org # v3.2 and later Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04dax: bdev_direct_access() may sleepMatthew Wilcox1-0/+6
The brd driver is the only in-tree driver that may sleep currently. After some discussion on linux-fsdevel, we decided that any driver may choose to sleep in its ->direct_access method. To ensure that all callers of bdev_direct_access() are prepared for this, add a call to might_sleep(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04block: Add support for DAX reads/writes to block devicesMatthew Wilcox2-2/+8
If a block device supports the ->direct_access methods, bypass the normal DIO path and use DAX to go straight to memcpy() instead of allocating a DIO and a BIO. Includes support for the DIO_SKIP_DIO_COUNT flag in DAX, as is done in do_blockdev_direct_IO(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04dax: Use copy_from_iter_nocacheMatthew Wilcox1-1/+1
When userspace does a write, there's no need for the written data to pollute the CPU cache. This matches the original XIP code. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04dax: Add block size note to documentationMatthew Wilcox1-2/+4
For block devices which are small enough, mkfs will default to creating a filesystem with block sizes smaller than page size. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds10-16/+54
Pull kvm fixes from Paolo Bonzini: "Except for the preempt notifiers fix, these are all small bugfixes that could have been waited for -rc2. Sending them now since I was taking care of Peter's patch anyway" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: add hyper-v crash msrs values KVM: x86: remove data variable from kvm_get_msr_common KVM: s390: virtio-ccw: don't overwrite config space values KVM: x86: keep track of LVT0 changes under APICv KVM: x86: properly restore LVT0 KVM: x86: make vapics_in_nmi_mode atomic sched, preempt_notifier: separate notifier registration from static_key inc/dec
2015-07-04NTB: Add split BAR output for debugfs statsDave Jiang1-15/+68
When split BAR is enabled, the driver needs to dump out the split BAR registers rather than the original 64bit BAR registers. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Change WARN_ON_ONCE to pr_warn_once on unsafeDave Jiang1-8/+16
The unsafe doorbell and scratchpad access should display reason when WARN is called. Otherwise we get a stack dump without any explanation. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Print driver name and version in module initDave Jiang2-0/+6
Printouts driver name and version to indicate what is being loaded. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Increase transport MTU to 64k from 16kDave Jiang1-1/+1
Benchmarking showed a significant performance increase with the MTU size to 64k instead of 16k. Change the driver default to 64k. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Rename Intel code names to platform namesDave Jiang3-465/+465
Instead of using the platform code names, use the correct platform names to identify the respective Intel NTB hardware. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Default to CPU memcpy for performanceDave Jiang1-4/+13
Disable DMA usage by default, since the CPU provides much better performance with write combining. Provide a module parameter to enable DMA usage when offloading the memcpy is preferred. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Improve performance with write combiningDave Jiang1-1/+10
Changing the memory window BAR mappings to write combining significantly boosts the performance. We will also use memcpy that uses non-temporal store, which showed performance improvement when doing non-cached memcpys. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Use NUMA memory in Intel driverAllen Hubbe1-6/+12
Allocate memory for the NUMA node of the NTB device. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Use NUMA memory and DMA chan in transportAllen Hubbe1-14/+32
Allocate memory and request the DMA channel for the same NUMA node as the NTB device. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Rate limit ntb_qp_link_workAllen Hubbe1-1/+1
When the ntb transport is connecting and waiting for the peer, the debug console receives lots of debug level messages about the remote qp link status being down. Rate limit those messages. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add tool test clientAllen Hubbe4-0/+600
This is a simple debugging driver that enables the doorbell and scratch pad registers to be read and written from the debugfs. This tool enables more complicated debugging to be scripted from user space. This driver may be used to test that your ntb hardware and drivers are functioning at a basic level. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add ping pong test clientAllen Hubbe6-1/+289
This is a simple ping pong driver that exercises the scratch pads and doorbells of the ntb hardware. This driver may be used to test that your ntb hardware and drivers are functioning at a basic level. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add parameters for Intel SNB B2B addressesAllen Hubbe2-19/+68
Add module parameters for the addresses to be used in B2B topology. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Reset transport QP link stats on downAllen Hubbe1-8/+28
Reset the link stats when the link goes down. In particular, the TX and RX index and count must be reset, or else the TX side will be sending packets to the RX side where the RX side is not expecting them. Reset all the stats, to be consistent. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Do not advance transport RX on link downAllen Hubbe1-2/+1
On link down, don't advance RX index to the next entry. The next entry should never be valid after receiving the link down flag. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Differentiate transport link down messagesAllen Hubbe1-2/+2
The same message "qp %d: Link Down\n" was printed at two locations in ntb_transport. Change the messages so they are distinct. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Check the device ID to set errata flagsDave Jiang1-5/+44
Set errata flags for the specific device IDs to which they apply, instead of the whole Xeon hardware class. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Enable link for Intel root port mode in probeDave Jiang1-0/+10
Link training should be enabled in the driver probe for root port mode. We should not have to wait for transport to be loaded for this to happen. Otherwise the ntb device will not show up on the transparent bridge side of the link. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Read peer info from local SPAD in transportDave Jiang1-5/+5
The transport was writing and then reading the peer scratch pad, essentially reading what it just wrote instead of exchanging any information with the peer. The transport expects the peer values to be the same as the local values, so this issue was not obvious. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Split ntb_hw_intel and ntb_transport driversAllen Hubbe13-2194/+2588
Change ntb_hw_intel to use the new NTB hardware abstraction layer. Split ntb_transport into its own driver. Change it to use the new NTB hardware abstraction layer. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add NTB hardware abstraction layerAllen Hubbe5-1/+1271
Abstract the NTB device behind a programming interface, so that it can support different hardware and client drivers. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-18/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq update from Thomas Gleixner: "The last update for 4.2 is just moving a macro from a local header to the global one, so it can be used in architecture code as well. Cleanup of the now empty local header is 4.3 material" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Move IRQCHIP_DECLARE macro to include/linux/irqchip.h
2015-07-04Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds5-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two FPU rewrite related fixes. This addresses all known x86 regressions at this stage. Also some other misc fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Fix boot crash in the early FPU code x86/asm/entry/64: Update path names x86/fpu: Fix FPU related boot regression when CPUID masking BIOS feature is enabled x86/boot/setup: Clean up the e820_reserve_setup_data() code x86/kaslr: Fix typo in the KASLR_FLAG documentation
2015-07-04Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds9-35/+71
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Debug info and other statistics fixes and related enhancements" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/numa: Fix numa balancing stats in /proc/pid/sched sched/numa: Show numa_group ID in /proc/sched_debug task listings sched/debug: Move print_cfs_rq() declaration to kernel/sched/sched.h sched/stat: Expose /proc/pid/schedstat if CONFIG_SCHED_INFO=y sched/stat: Simplify the sched_info accounting dependency
2015-07-04Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds54-422/+885
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "This tree includes an x86 PMU scheduling fix, but most changes are late breaking tooling fixes and updates: User visible fixes: - Create config.detected into OUTPUT directory, fixing parallel builds sharing the same source directory (Aaro Kiskinen) - Allow to specify custom linker command, fixing some MIPS64 builds. (Aaro Kiskinen) - Fix to show proper convergence stats in 'perf bench numa' (Srikar Dronamraju) User visible changes: - Validate syscall list passed via -e argument to 'perf trace'. (Arnaldo Carvalho de Melo) - Introduce 'perf stat --per-thread' (Jiri Olsa) - Check access permission for --kallsyms and --vmlinux (Li Zhang) - Move toggling event logic from 'perf top' and into hists browser, allowing freeze/unfreeze with event lists with more than one entry (Namhyung Kim) - Add missing newlines when dumping PERF_RECORD_FINISHED_ROUND and showing the Aggregated stats in 'perf report -D' (Adrian Hunter) Infrastructure fixes: - Add missing break for PERF_RECORD_ITRACE_START, which caused those events samples to be parsed as well as PERF_RECORD_LOST_SAMPLES. ITRACE_START only appears when Intel PT or BTS are present, so.. (Jiri Olsa) - Call the perf_session destructor when bailing out in the inject, kmem, report, kvm and mem tools (Taeung Song) Infrastructure changes: - Move stuff out of 'perf stat' and into the lib for further use (Jiri Olsa) - Reference count the cpu_map and thread_map classes (Jiri Olsa) - Set evsel->{cpus,threads} from the evlist, if not set, allowing the generalization of some 'perf stat' functions that previously were accessing private static evlist variable (Jiri Olsa) - Delete an unnecessary check before the calling free_event_desc() (Markus Elfring) - Allow auxtrace data alignment (Adrian Hunter) - Allow events with dot (Andi Kleen) - Fix failure to 'perf probe' events on arm (He Kuang) - Add testing for Makefile.perf (Jiri Olsa) - Add test for make install with prefix (Jiri Olsa) - Fix single target build dependency check (Jiri Olsa) - Access thread_map entries via accessors, prep patch to hold more info per entry, for ongoing 'perf stat --per-thread' work (Jiri Olsa) - Use __weak definition from compiler.h (Sukadev Bhattiprolu) - Split perf_pmu__new_alias() (Sukadev Bhattiprolu)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) perf tools: Allow to specify custom linker command perf tools: Create config.detected into OUTPUT directory perf mem: Fill in the missing session freeing after an error occurs perf kvm: Fill in the missing session freeing after an error occurs perf report: Fill in the missing session freeing after an error occurs perf kmem: Fill in the missing session freeing after an error occurs perf inject: Fill in the missing session freeing after an error occurs perf tools: Add missing break for PERF_RECORD_ITRACE_START perf/x86: Fix 'active_events' imbalance perf symbols: Check access permission when reading symbol files perf stat: Introduce --per-thread option perf stat: Introduce print_counters function perf stat: Using init_stats instead of memset perf stat: Rename print_interval to process_interval perf stat: Remove perf_evsel__read_cb function perf stat: Move perf_stat initialization counter process code perf stat: Move zero_per_pkg into counter process code perf stat: Separate counters reading and processing perf stat: Introduce read_counters function perf stat: Introduce perf_evsel__read function ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-17 23:00:48 +0300