summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-02Coccinelle: memdup: Fix typo in warning messagesDafna Hirschfeld1-2/+2
Replace 'kmemdep' with 'kmemdup' in warning messages. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Nicolas Palix <nicolas.palix@imag.fr> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kconfig: Update ncurses package names for menuconfigArvind Prasanna1-1/+2
The package name is ncurses-devel for Redhat based distros and libncurses-dev for Debian based distros. Signed-off-by: Arvind Prasanna <arvindprasanna@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kbuild/kallsyms: trivial typo fixCao jin1-1/+1
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kbuild: test --build-id linker flag by ld-option instead of cc-ldoptionMasahiro Yamada1-2/+1
'--build-id' is passed to $(LD), so it should be tested by 'ld-option'. This seems a kind of misconversion when ld-option was renamed to cc-ldoption. Commit f86fd3066052 ("kbuild: rename ld-option to cc-ldoption") renamed all instances of 'ld-option' to 'cc-ldoption'. Then, commit 691ef3e7fdc1 ("kbuild: introduce ld-option") re-added 'ld-option' as a new implementation. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignmentCao jin1-1/+1
GCC_PLUGINS_CFLAGS is already in the environment, so it is superfluous to add it in commandline of final build of init/. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kconfig: Don't leak choice names during parsingMasahiro Yamada1-0/+1
The named choice is not used in the kernel tree, but if it were used, it would not be freed. The intention of the named choice can be seen in the log of commit 5a1aa8a1aff6 ("kconfig: add named choice group"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-02sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCEMasahiro Yamada1-1/+3
If CONFIG_USE_BUILTIN_DTB is enabled, but CONFIG_BUILTIN_DTB_SOURCE is empty (for example, allmodconfig), it fails to build, like this: make[2]: *** No rule to make target 'arch/sh/boot/dts/.dtb.o', needed by 'arch/sh/boot/dts/built-in.o'. Stop. Surround obj-y with ifneq ... endif. I replaced $(CONFIG_USE_BUILTIN_DTB) with 'y' since this is always the case from the following code from arch/sh/Makefile: core-$(CONFIG_USE_BUILTIN_DTB) += arch/sh/boot/dts/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_listMasahiro Yamada1-0/+1
The 'defconfig_list' is a weird attribute. If the '.config' is missing, conf_read_simple() iterates over all visible defaults, then it uses the first one for which fopen() succeeds. config DEFCONFIG_LIST string depends on !UML option defconfig_list default "/lib/modules/$UNAME_RELEASE/.config" default "/etc/kernel-config" default "/boot/config-$UNAME_RELEASE" default "$ARCH_DEFCONFIG" default "arch/$ARCH/defconfig" However, like other symbols, the first visible default is always written out to the .config file. This might be different from what has been actually used. For example, on my machine, the third one "/boot/config-$UNAME_RELEASE" is opened, like follows: $ rm .config $ make oldconfig 2>/dev/null scripts/kconfig/conf --oldconfig Kconfig # # using defaults found in /boot/config-4.4.0-112-generic # * * Restart config... * * * IRQ subsystem * Expose irq internals in debugfs (GENERIC_IRQ_DEBUGFS) [N/y/?] (NEW) However, the resulted .config file contains the first one since it is visible: $ grep CONFIG_DEFCONFIG_LIST .config CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" In order to stop confusing people, prevent this CONFIG option from being written to the .config file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-01kconfig: add xstrdup() helperMasahiro Yamada6-5/+17
We already have xmalloc(), xcalloc(), and xrealloc((). Add xstrdup() as well to save tedious error handling. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-01kbuild: disable sparse warnings about unknown attributesLuc Van Oostenryck1-1/+1
Currently, sparse issues warnings on code using an attribute it doesn't know about. One of the problem with this is that these warnings have no value for the developer, it's just noise for him. At best these warnings tell something about some deficiencies of sparse itself but not about a potential problem with code analyzed. A second problem with this is that sparse release are, alas, less frequent than new attributes are added to GCC. So, avoid the noise by asking sparse to not warn about attributes it doesn't know about. Reference: https://marc.info/?l=linux-sparse&m=151871600016790 Reference: https://marc.info/?l=linux-sparse&m=151871725417322 Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-01Makefile: Fix lying comment re. silentoldconfigUlf Magnusson1-4/+3
The comment above the silentoldconfig invocation is outdated. 'make oldconfig' updates just .config and doesn't touch the include/config/ tree. This came up in https://lkml.org/lkml/2018/2/12/415. While fixing the comment, make it more informative by explaining the purpose of the unfortunately named silentoldconfig. I can't make sense of the comment re. auto.conf.cmd and a cleaned tree. include/config/auto.conf and include/config/auto.conf.cmd are both created simultaneously by silentoldconfig (in scripts/kconfig/confdata.c, by conf_write_autoconf()), and nothing seems to remove auto.conf.cmd that wouldn't remove auto.conf. Remove that part of the comment rather than blindly copying it. It might be a leftover from an older way of doing things. The include/config/auto.conf.cmd prerequisite might be there to ensure that silentoldconfig gets rerun if conf_write_autoconf() fails between writing out auto.conf.cmd and auto.conf (a comment in the function indicates that auto.conf is deliberately written out last to mark completion of the operation). It seems the Makefile dependency between include/config/auto.conf and .config would already take care of that though, since include/config/auto.conf would still be out of date re. .config if the operation fails. Cop out and leave the prerequisite in for now. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-26Linux 4.16-rc3Linus Torvalds1-1/+1
2018-02-26Merge tag 'xtensa-20180225' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds2-17/+93
Pull Xtensa fixes from Max Filippov: "Two fixes for reserved memory/DMA buffers allocation in high memory on xtensa architecture - fix memory accounting when reserved memory is in high memory region - fix DMA allocation from high memory" * tag 'xtensa-20180225' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: support DMA buffers in high memory xtensa: fix high memory/reserved memory collision
2018-02-26Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds6-22/+48
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A small set of fixes: - UAPI data type correction for hyperv - correct the cpu cores field in /proc/cpuinfo on CPU hotplug - return proper error code in the resctrl file system failure path to avoid silent subsequent failures - correct a subtle accounting issue in the new vector allocation code which went unnoticed for a while and caused suspend/resume failures" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations x86/topology: Fix function name in documentation x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system x86/apic/vector: Handle vector release on CPU unplug correctly genirq/matrix: Handle CPU offlining proper x86/headers/UAPI: Use __u64 instead of u64 in <uapi/asm/hyperv.h>
2018-02-26Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Thomas Gleixner: "A single commit which shuts up a bogus GCC-8 warning" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()
2018-02-26Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds3-18/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Three patches to fix memory ordering issues on ALPHA and a comment to clarify the usage scope of a mutex internal function" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of __ASM__MB locking/xchg/alpha: Add unconditional memory barrier to cmpxchg() locking/mutex: Add comment to __mutex_owner() to deter usage
2018-02-26Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds17-19/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cleanup patchlet from Thomas Gleixner: "A single commit removing a bunch of bogus double semicolons all over the tree" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide/trivial: Remove ';;$' typo noise
2018-02-26Merge tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds3-11/+11
Pull NFS client bugfixes from Trond Myklebust: - fix a broken cast in nfs4_callback_recallany() - fix an Oops during NFSv4 migration events - make struct nlmclnt_fl_close_lock_ops static * tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: make struct nlmclnt_fl_close_lock_ops static nfs: system crashes after NFS4ERR_MOVED recovery NFSv4: Fix broken cast in nfs4_callback_recallany()
2018-02-25Merge tag 'powerpc-4.16-4' of ↵Linus Torvalds8-9/+20
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Add handling for a missing instruction in our 32-bit BPF JIT so that it can be used for seccomp filtering. - Add a missing NULL pointer check before a function call in new EEH code. - Fix an error path in the new ocxl driver to correctly return EFAULT. - The support for the new ibm,drc-info device tree property turns out to need several fixes, so for now we just stop advertising to firmware that we support it until the bugs can be ironed out. - One fix for the new drmem code which was incorrectly modifying the device tree in place. - Finally two fixes for the RFI flush support, so that firmware can advertise to us that it should be disabled entirely so as not to affect performance. Thanks to: Bharata B Rao, Frederic Barrat, Juan J. Alvarez, Mark Lord, Michael Bringmann. * tag 'powerpc-4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Support firmware disable of RFI flush powerpc/pseries: Support firmware disable of RFI flush powerpc/mm/drmem: Fix unexpected flag value in ibm,dynamic-memory-v2 powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access powerpc/pseries: Revert support for ibm,drc-info devtree property powerpc/pseries: Fix duplicate firmware feature for DRC_INFO ocxl: Fix potential bad errno on irq allocation powerpc/eeh: Fix crashes in eeh_report_resume()
2018-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds108-455/+625
Pull networking fixes from David Miller: 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh. 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang. 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song. 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang. 5) Fix potential deadlocks in netfilter getsockopt() code paths, from Paolo Abeni. 6) Netfilter stackpointer size checks really are needed to validate user input, from Florian Westphal. 7) Missing timer init in x_tables, from Paolo Abeni. 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg. 9) When an ibmvnic device is brought down then back up again, it can be sent queue entries from a previous session, handle this properly instead of crashing. From Thomas Falcon. 10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman. 11) When we are dumping filters in cls_api, the output SKB is empty, and the filter we are dumping is too large for the space in the SKB, we should return -EMSGSIZE like other netlink dump operations do. Otherwise userland has no signal that is needs to increase the size of its read buffer. From Roman Kapl. 12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer. 13) Module refcount leak in netlink when a dump start fails, from Jason Donenfeld. 14) Handle sub-optimal GSO sizes better in TCP BBR congestion control, from Eric Dumazet. 15) Releasing bpf per-cpu arraymaps can take a long time, add a condtional scheduling point. From Eric Dumazet. 16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From Daniel Borkmann. 17) Fix page leak in gianfar driver, from Andy Spencer. 18) Missed clearing of estimator scratch buffer, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net_sched: gen_estimator: fix broken estimators based on percpu stats gianfar: simplify FCS handling and fix memory leak ipv6 sit: work around bogus gcc-8 -Wrestrict warning macvlan: fix use-after-free in macvlan_common_newlink() bpf, arm64: fix out of bounds access in tail call bpf, x64: implement retpoline for tail call rxrpc: Fix send in rxrpc_send_data_packet() net: aquantia: Fix error handling in aq_pci_probe() bpf: fix rcu lockdep warning for lpm_trie map_free callback bpf: add schedule points in percpu arrays management regulatory: add NUL to request alpha2 ibmvnic: Fix early release of login buffer net/smc9194: Remove bogus CONFIG_MAC reference net: ipv4: Set addr_type in hash_keys for forwarded case tcp_bbr: better deal with suboptimal GSO smsc75xx: fix smsc75xx_set_features() netlink: put module reference if dump start fails selftests/bpf/test_maps: exit child process without error in ENOMEM case selftests/bpf: update gitignore with test_libbpf_open selftests/bpf: tcpbpf_kern: use in6_* macros from glibc ..
2018-02-24Merge branch 'fixes-v4.16-rc3' of ↵Linus Torvalds9-41/+179
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris: - keys fixes via David Howells: "A collection of fixes for Linux keyrings, mostly thanks to Eric Biggers: - Fix some PKCS#7 verification issues. - Fix handling of unsupported crypto in X.509. - Fix too-large allocation in big_key" - Seccomp updates via Kees Cook: "These are fixes for the get_metadata interface that landed during -rc1. While the new selftest is strictly not a bug fix, I think it's in the same spirit of avoiding bugs" - an IMA build fix from Randy Dunlap * 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: integrity/security: fix digsig.c build error with header file KEYS: Use individual pages in big_key for crypto buffers X.509: fix NULL dereference when restricting key with unsupported_sig X.509: fix BUG_ON() when hash algorithm is unsupported PKCS#7: fix direct verification of SignerInfo signature PKCS#7: fix certificate blacklisting PKCS#7: fix certificate chain verification seccomp: add a selftest for get_metadata ptrace, seccomp: tweak get_metadata behavior slightly seccomp, ptrace: switch get_metadata types to arch independent
2018-02-24Merge tag 'arm64-fixes' of ↵Linus Torvalds17-184/+183
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "arm64 and perf fixes: - build error when accessing MPIDR_HWID_BITMASK from .S - fix CTR_EL0 field definitions - remove/disable some kernel messages on user faults (unhandled signals, unimplemented syscalls) - fix kernel page fault in unwind_frame() with function graph tracing - fix perf sleeping while atomic errors when booting with ACPI" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix unwind_frame() for filtered out fn for function graph tracing arm64: Enforce BBM for huge IO/VMAP mappings arm64: perf: correct PMUVer probing arm_pmu: acpi: request IRQs up-front arm_pmu: note IRQs and PMUs per-cpu arm_pmu: explicitly enable/disable SPIs at hotplug arm_pmu: acpi: check for mismatched PPIs arm_pmu: add armpmu_alloc_atomic() arm_pmu: fold platform helpers into platform code arm_pmu: kill arm_pmu_platdata ARM: ux500: remove PMU IRQ bouncer arm64: __show_regs: Only resolve kernel symbols when running at EL1 arm64: Remove unimplemented syscall log message arm64: Disable unhandled signal log messages by default arm64: cpufeature: Fix CTR_EL0 field definitions arm64: uaccess: Formalise types for access_ok() arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S files
2018-02-24Merge tag 'mips_fixes_4.16_3' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fix from James Hogan: "A single MIPS fix for mismatching struct compat_flock, resulting in bus errors starting Firefox on Debian 8 since 4.13" * tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: Drop spurious __unused in struct compat_flock
2018-02-24Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk fixlet from Petr Mladek: "People expect to see the real pointer value for %px. Let's substitute '(null)' only for the other %p? format modifiers that need to deference the pointer" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: vsprintf: avoid misleading "(null)" for %px
2018-02-24Merge branch 'i2c/for-current' of ↵Linus Torvalds6-5/+29
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two bugfixes, one v4.16 regression fix, and two documentation fixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Consider SCL GPIO optional i2c: busses: i2c-sirf: Fix spelling: "formular" -> "formula". i2c: bcm2835: Set up the rising/falling edge delays i2c: i801: Add missing documentation entries for Braswell and Kaby Lake i2c: designware: must wait for enable
2018-02-24Merge tag 'scsi-fixes' of ↵Linus Torvalds20-98/+107
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "These are mostly fixes for problems with merge window code. In addition we have one doc update (alua) and two dead code removals (aiclib and octogon) a spurious assignment removal (csiostor) and a performance improvement for storvsc involving better interrupt spreading and increasing the command per lun handling" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla4xxx: skip error recovery in case of register disconnect. scsi: aacraid: fix shutdown crash when init fails scsi: qedi: Cleanup local str variable scsi: qedi: Fix truncation of CHAP name and secret scsi: qla2xxx: Fix incorrect handle for abort IOCB scsi: qla2xxx: Fix double free bug after firmware timeout scsi: storvsc: Increase cmd_per_lun for higher speed devices scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els() scsi: scsi_dh: Document alua_rtpg_queue() arguments scsi: Remove Makefile entry for oktagon files scsi: aic7xxx: remove aiclib.c scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion() scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo() scsi: sym53c8xx_2: iterator underflow in sym_getsync() scsi: bnx2fc: Fix check in SCSI completion handler for timed out request scsi: csiostor: remove redundant assignment to pointer 'ln' scsi: ufs: Enable quirk to ignore sending WRITE_SAME command scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info scsi: qla2xxx: Fix memory corruption during hba reset test scsi: mpt3sas: fix an out of bound write
2018-02-23Merge tag 'drm-fixes-for-v4.16-rc3' of ↵Linus Torvalds26-107/+261
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "A bunch of fixes for rc3: Exynos: - fixes for using monotonic timestamps - register definitions - removal of unused file ipu-v3L - minor changes - make some register arrays const+static - fix some leaks meson: - fix for vsync atomic: - fix for memory leak EDID parser: - add quirks for some more non-desktop devices - 6-bit panel fix. drm_mm: - fix a bug in the core drm mm hole handling cirrus: - fix lut loading regression Lastly there is a deadlock fix around runtime suspend for secondary GPUs. There was a deadlock between one thread trying to wait for a workqueue job to finish in the runtime suspend path, and the workqueue job it was waiting for in turn waiting for a runtime_get_sync to return. The fixes avoids it by not doing the runtime sync in the workqueue as then we always wait for all those tasks to complete before we runtime suspend" * tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm/tve200: fix kernel-doc documentation comment include drm/edid: quirk Sony PlayStation VR headset as non-desktop drm/edid: quirk Windows Mixed Reality headsets as non-desktop drm/edid: quirk Oculus Rift headsets as non-desktop drm/meson: fix vsync buffer update drm: Handle unexpected holes in color-eviction drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1 drm/exynos: remove exynos_drm_rotator.h drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions drm/exynos: fix comparison to bitshift when dealing with a mask drm/exynos: g2d: use monotonic timestamps drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle drm/amdgpu: Fix deadlock on runtime suspend drm/radeon: Fix deadlock on runtime suspend drm/nouveau: Fix deadlock on runtime suspend drm: Allow determining if current task is output poll worker ...
2018-02-23net_sched: gen_estimator: fix broken estimators based on percpu statsEric Dumazet1-0/+1
pfifo_fast got percpu stats lately, uncovering a bug I introduced last year in linux-4.10. I missed the fact that we have to clear our temporary storage before calling __gnet_stats_copy_basic() in the case of percpu stats. Without this fix, rate estimators (tc qd replace dev xxx root est 1sec 4sec pfifo_fast) are utterly broken. Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller10-15/+80
Alexei Starovoitov says: ==================== pull-request: bpf 2018-02-22 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) two urgent fixes for bpf_tail_call logic for x64 and arm64 JITs, from Daniel. 2) cond_resched points in percpu array alloc/free paths, from Eric. 3) lockdep and other minor fixes, from Yonghong, Arnd, Anders, Li. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23gianfar: simplify FCS handling and fix memory leakAndy Spencer1-16/+7
Previously, buffer descriptors containing only the frame check sequence (FCS) were skipped and not added to the skb. However, the page reference count was still incremented, leading to a memory leak. Fixing this inside gfar_add_rx_frag() is difficult due to reserved memory handling and page reuse. Instead, move the FCS handling to gfar_process_frame() and trim off the FCS before passing the skb up the networking stack. Signed-off-by: Andy Spencer <aspencer@spacex.com> Signed-off-by: Jim Gruen <jgruen@spacex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23ipv6 sit: work around bogus gcc-8 -Wrestrict warningArnd Bergmann1-1/+1
gcc-8 has a new warning that detects overlapping input and output arguments in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(), which is actually correct: net/ipv6/sit.c: In function 'sit_init_net': net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] The problem here is that the logic detecting the memcpy() arguments finds them to be the same, but the conditional that tests for the input and output of ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant. We know that netdev_priv(t->dev) is the same as t for a tunnel device, and comparing "dev" directly here lets the compiler figure out as well that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so it no longer warns. This code is old, so Cc stable to make sure that we don't get the warning for older kernels built with new gcc. Cc: Martin Sebor <msebor@gmail.com> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23macvlan: fix use-after-free in macvlan_common_newlink()Alexey Kodanev1-1/+1
The following use-after-free was reported by KASan when running LTP macvtap01 test on 4.16-rc2: [10642.528443] BUG: KASAN: use-after-free in macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10642.626607] Read of size 8 at addr ffff880ba49f2100 by task ip/18450 ... [10642.963873] Call Trace: [10642.994352] dump_stack+0x5c/0x7c [10643.035325] print_address_description+0x75/0x290 [10643.092938] kasan_report+0x28d/0x390 [10643.137971] ? macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10643.207963] macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10643.275978] macvtap_newlink+0x171/0x260 [macvtap] [10643.334532] rtnl_newlink+0xd4f/0x1300 ... [10646.256176] Allocated by task 18450: [10646.299964] kasan_kmalloc+0xa6/0xd0 [10646.343746] kmem_cache_alloc_trace+0xf1/0x210 [10646.397826] macvlan_common_newlink+0x6de/0x14a0 [macvlan] [10646.464386] macvtap_newlink+0x171/0x260 [macvtap] [10646.522728] rtnl_newlink+0xd4f/0x1300 ... [10647.022028] Freed by task 18450: [10647.061549] __kasan_slab_free+0x138/0x180 [10647.111468] kfree+0x9e/0x1c0 [10647.147869] macvlan_port_destroy+0x3db/0x650 [macvlan] [10647.211411] rollback_registered_many+0x5b9/0xb10 [10647.268715] rollback_registered+0xd9/0x190 [10647.319675] register_netdevice+0x8eb/0xc70 [10647.370635] macvlan_common_newlink+0xe58/0x14a0 [macvlan] [10647.437195] macvtap_newlink+0x171/0x260 [macvtap] Commit d02fd6e7d293 ("macvlan: Fix one possible double free") handles the case when register_netdevice() invokes ndo_uninit() on error and as a result free the port. But 'macvlan_port_get_rtnl(dev))' check (returns dev->rx_handler_data), which was added by this commit in order to prevent double free, is not quite correct: * for macvlan it always returns NULL because 'lowerdev' is the one that was used to register rx handler (port) in macvlan_port_create() as well as to unregister it in macvlan_port_destroy(). * for macvtap it always returns a valid pointer because macvtap registers its own rx handler before macvlan_common_newlink(). Fixes: d02fd6e7d293 ("macvlan: Fix one possible double free") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23arm64: fix unwind_frame() for filtered out fn for function graph tracingPratyush Anand3-2/+7
do_task_stat() calls get_wchan(), which further does unwind_frame(). unwind_frame() restores frame->pc to original value in case function graph tracer has modified a return address (LR) in a stack frame to hook a function return. However, if function graph tracer has hit a filtered function, then we can't unwind it as ftrace_push_return_trace() has biased the index(frame->graph) with a 'huge negative' offset(-FTRACE_NOTRACE_DEPTH). Moreover, arm64 stack walker defines index(frame->graph) as unsigned int, which can not compare a -ve number. Similar problem we can have with calling of walk_stackframe() from save_stack_trace_tsk() or dump_backtrace(). This patch fixes unwind_frame() to test the index for -ve value and restore index accordingly before we can restore frame->pc. Reproducer: cd /sys/kernel/debug/tracing/ echo schedule > set_graph_notrace echo 1 > options/display-graph echo wakeup > current_tracer ps -ef | grep -i agent Above commands result in: Unable to handle kernel paging request at virtual address ffff801bd3d1e000 pgd = ffff8003cbe97c00 [ffff801bd3d1e000] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 96000006 [#1] SMP [...] CPU: 5 PID: 11696 Comm: ps Not tainted 4.11.0+ #33 [...] task: ffff8003c21ba000 task.stack: ffff8003cc6c0000 PC is at unwind_frame+0x12c/0x180 LR is at get_wchan+0xd4/0x134 pc : [<ffff00000808892c>] lr : [<ffff0000080860b8>] pstate: 60000145 sp : ffff8003cc6c3ab0 x29: ffff8003cc6c3ab0 x28: 0000000000000001 x27: 0000000000000026 x26: 0000000000000026 x25: 00000000000012d8 x24: 0000000000000000 x23: ffff8003c1c04000 x22: ffff000008c83000 x21: ffff8003c1c00000 x20: 000000000000000f x19: ffff8003c1bc0000 x18: 0000fffffc593690 x17: 0000000000000000 x16: 0000000000000001 x15: 0000b855670e2b60 x14: 0003e97f22cf1d0f x13: 0000000000000001 x12: 0000000000000000 x11: 00000000e8f4883e x10: 0000000154f47ec8 x9 : 0000000070f367c0 x8 : 0000000000000000 x7 : 00008003f7290000 x6 : 0000000000000018 x5 : 0000000000000000 x4 : ffff8003c1c03cb0 x3 : ffff8003c1c03ca0 x2 : 00000017ffe80000 x1 : ffff8003cc6c3af8 x0 : ffff8003d3e9e000 Process ps (pid: 11696, stack limit = 0xffff8003cc6c0000) Stack: (0xffff8003cc6c3ab0 to 0xffff8003cc6c4000) [...] [<ffff00000808892c>] unwind_frame+0x12c/0x180 [<ffff000008305008>] do_task_stat+0x864/0x870 [<ffff000008305c44>] proc_tgid_stat+0x3c/0x48 [<ffff0000082fde0c>] proc_single_show+0x5c/0xb8 [<ffff0000082b27e0>] seq_read+0x160/0x414 [<ffff000008289e6c>] __vfs_read+0x58/0x164 [<ffff00000828b164>] vfs_read+0x88/0x144 [<ffff00000828c2e8>] SyS_read+0x60/0xc0 [<ffff0000080834a0>] __sys_trace_return+0x0/0x4 Fixes: 20380bb390a4 (arm64: ftrace: fix a stack tracer's output under function graph tracer) Signed-off-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Jerome Marchand <jmarchan@redhat.com> [catalin.marinas@arm.com: replace WARN_ON with WARN_ON_ONCE] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-23x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across ↵Samuel Neves1-0/+1
CPU hotplug operations Without this fix, /proc/cpuinfo will display an incorrect amount of CPU cores, after bringing them offline and online again, as exemplified below: $ cat /proc/cpuinfo | grep cores cpu cores : 4 cpu cores : 8 cpu cores : 8 cpu cores : 20 cpu cores : 4 cpu cores : 3 cpu cores : 2 cpu cores : 2 This patch fixes this by always zeroing the booted_cores variable upon turning off a logical CPU. Tested-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Samuel Neves <sneves@dei.uc.pt> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jgross@suse.com Cc: luto@kernel.org Cc: prarit@redhat.com Cc: vkuznets@redhat.com Link: http://lkml.kernel.org/r/20180221205036.5244-1-sneves@dei.uc.pt Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23x86/topology: Fix function name in documentationDou Liyang1-1/+1
topology_sibling_cpumask() is the correct thread-related topology function in the kernel: s/topology_sibling_mask/topology_sibling_cpumask Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/20180222084812.14497-1-douly.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugsAndrea Parri1-3/+18
Successful RMW operations are supposed to be fully ordered, but Alpha's xchg() and cmpxchg() do not meet this requirement. Will Deacon noticed the bug: > So MP using xchg: > > WRITE_ONCE(x, 1) > xchg(y, 1) > > smp_load_acquire(y) == 1 > READ_ONCE(x) == 0 > > would be allowed. ... which thus violates the above requirement. Fix it by adding a leading smp_mb() to the xchg() and cmpxchg() implementations. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-alpha@vger.kernel.org Link: http://lkml.kernel.org/r/1519291488-5752-1-git-send-email-parri.andrea@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of ↵Andrea Parri2-14/+8
__ASM__MB Replace each occurrence of __ASM__MB with a (trailing) smp_mb() in xchg(), cmpxchg(), and remove the now unused __ASM__MB definitions; this improves readability, with no additional synchronization cost. Suggested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-alpha@vger.kernel.org Link: http://lkml.kernel.org/r/1519291469-5702-1-git-send-email-parri.andrea@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23x86/intel_rdt: Fix incorrect returned value when creating rdgroup ↵Wang Hui1-0/+1
sub-directory in resctrl file system If no monitoring feature is detected because all monitoring features are disabled during boot time or there is no monitoring feature in hardware, creating rdtgroup sub-directory by "mkdir" command reports error: mkdir: cannot create directory ‘/sys/fs/resctrl/p1’: No such file or directory But the sub-directory actually is generated and content is correct: cpus cpus_list schemata tasks The error is because rdtgroup_mkdir_ctrl_mon() returns non zero value after the sub-directory is created and the returned value is reported as an error to user. Clear the returned value to report to user that the sub-directory is actually created successfully. Signed-off-by: Wang Hui <john.wanghui@huawei.com> Signed-off-by: Zhang Yanfei <yanfei.zhang@huawei.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vikas <vikas.shivappa@intel.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Link: http://lkml.kernel.org/r/1519356363-133085-1-git-send-email-fenghua.yu@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23x86/apic/vector: Handle vector release on CPU unplug correctlyThomas Gleixner1-3/+22
When a irq vector is replaced, then the previous vector is normally released when the first interrupt happens on the new vector. If the target CPU of the previous vector is already offline when the new vector is installed, then the previous vector is silently discarded, which leads to accounting issues causing suspend failures and other problems. Adjust the logic so that the previous vector is freed in the underlying matrix allocator to ensure that the accounting stays correct. Fixes: 69cde0004a4b ("x86/vector: Use matrix allocator for vector assignment") Reported-by: Yuriy Vostrikov <delamonpansie@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Yuriy Vostrikov <delamonpansie@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180222112316.930791749@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-23powerpc/powernv: Support firmware disable of RFI flushMichael Ellerman1-0/+4
Some versions of firmware will have a setting that can be configured to disable the RFI flush, add support for it. Fixes: 6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush settings") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-23powerpc/pseries: Support firmware disable of RFI flushMichael Ellerman1-1/+2
Some versions of firmware will have a setting that can be configured to disable the RFI flush, add support for it. Fixes: 8989d56878a7 ("powerpc/pseries: Query hypervisor for RFI flush settings") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-23powerpc/mm/drmem: Fix unexpected flag value in ibm,dynamic-memory-v2Bharata B Rao1-3/+3
Memory addtion and removal by count and indexed-count methods temporarily mark the LMBs that are being added/removed by a special flag value DRMEM_LMB_RESERVED. Accessing flags value directly at a few places without proper accessor method is causing two unexpected side-effects: - DRMEM_LMB_RESERVED bit is becoming part of the flags word of drconf_cell_v2 entries in ibm,dynamic-memory-v2 DT property. - This results in extra drconf_cell entries in ibm,dynamic-memory-v2. For example if 1G memory is added, it leads to one entry for 3 LMBs and 1 separate entry for the last LMB. All the 4 LMBs should be defined by one entry here. Fix this by always accessing the flags by its accessor method drmem_lmb_flags(). Fixes: 2b31e3aec1db ("powerpc/drmem: Add support for ibm, dynamic-memory-v2 property") Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-23integrity/security: fix digsig.c build error with header fileRandy Dunlap1-0/+1
security/integrity/digsig.c has build errors on some $ARCH due to a missing header file, so add it. security/integrity/digsig.c:146:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: linux-integrity@vger.kernel.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: James Morris <james.morris@microsoft.com>
2018-02-23Merge tag 'keys-fixes-20180222-2' of ↵James Morris5-37/+111
https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into fixes-v4.16-rc3 Keyrings fixes.
2018-02-23Merge tag 'imx-drm-next-2018-02-22' of ↵Dave Airlie5-2/+12
git://git.pengutronix.de/git/pza/linux into drm-fixes drm/imx: ipu-v3 fixups and grayscale support - Make const interrupt register arrays static, reduces object size. - Fix device_node leaks in PRE/PRG phandle lookup functions. - Add 8-bit and 16-bit grayscale buffer support to ipu_cpmem_set_image, - add 10-bit and 12-bit grayscale media bus support to ipu-csi, to be used by the imx-media driver. * tag 'imx-drm-next-2018-02-22' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle gpu: ipu-cpmem: add 8-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: make const arrays int_reg static, shrinks object size
2018-02-23MIPS: boot: Define __ASSEMBLY__ for its.S buildKees Cook1-0/+1
The MIPS %.its.S compiler command did not define __ASSEMBLY__, which meant when compiler_types.h was added to kconfig.h, unexpected things appeared (e.g. struct declarations) which should not have been present. As done in the general %.S compiler command, __ASSEMBLY__ is now included here too. The failure was: Error: arch/mips/boot/vmlinux.gz.its:201.1-2 syntax error FATAL ERROR: Unable to parse input tree /usr/bin/mkimage: Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument /usr/bin/mkimage Can't add hashes to FIT blob Reported-by: kbuild test robot <lkp@intel.com> Fixes: 28128c61e08e ("kconfig.h: Include compiler types to avoid missed struct attributes") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-23Merge branch 'siginfo-linus' of ↵Linus Torvalds1-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo fix from Eric Biederman: "This fixes a build error that only shows up on blackfin" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: fs/signalfd: fix build error for BUS_MCEERR_AR
2018-02-23Merge branch 'linus' of ↵Linus Torvalds1-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix an oops in the s5p-sss driver when used with ecb(aes)" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s5p-sss - Fix kernel Oops in AES-ECB mode
2018-02-23bpf, arm64: fix out of bounds access in tail callDaniel Borkmann2-2/+29
I recently noticed a crash on arm64 when feeding a bogus index into BPF tail call helper. The crash would not occur when the interpreter is used, but only in case of JIT. Output looks as follows: [ 347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510 [...] [ 347.043065] [fffb850e96492510] address between user and kernel address ranges [ 347.050205] Internal error: Oops: 96000004 [#1] SMP [...] [ 347.190829] x13: 0000000000000000 x12: 0000000000000000 [ 347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10 [ 347.201427] x9 : 0000000000000000 x8 : 0000000000000000 [ 347.206726] x7 : 0000000000000000 x6 : 001c991738000000 [ 347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a [ 347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500 [ 347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500 [ 347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61) [ 347.235221] Call trace: [ 347.237656] 0xffff000002f3a4fc [ 347.240784] bpf_test_run+0x78/0xf8 [ 347.244260] bpf_prog_test_run_skb+0x148/0x230 [ 347.248694] SyS_bpf+0x77c/0x1110 [ 347.251999] el0_svc_naked+0x30/0x34 [ 347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b) [...] In this case the index used in BPF r3 is the same as in r1 at the time of the call, meaning we fed a pointer as index; here, it had the value 0xffff808fd7cf0500 which sits in x2. While I found tail calls to be working in general (also for hitting the error cases), I noticed the following in the code emission: # bpftool p d j i 988 [...] 38: ldr w10, [x1,x10] 3c: cmp w2, w10 40: b.ge 0x000000000000007c <-- signed cmp 44: mov x10, #0x20 // #32 48: cmp x26, x10 4c: b.gt 0x000000000000007c 50: add x26, x26, #0x1 54: mov x10, #0x110 // #272 58: add x10, x1, x10 5c: lsl x11, x2, #3 60: ldr x11, [x10,x11] <-- faulting insn (f86b694b) 64: cbz x11, 0x000000000000007c [...] Meaning, the tests passed because commit ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper") was using signed compares instead of unsigned which as a result had the test wrongly passing. Change this but also the tail call count test both into unsigned and cap the index as u32. Latter we did as well in 90caccdd8cc0 ("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here, too. Tested on HiSilicon Hi1616. Result after patch: # bpftool p d j i 268 [...] 38: ldr w10, [x1,x10] 3c: add w2, w2, #0x0 40: cmp w2, w10 44: b.cs 0x0000000000000080 48: mov x10, #0x20 // #32 4c: cmp x26, x10 50: b.hi 0x0000000000000080 54: add x26, x26, #0x1 58: mov x10, #0x110 // #272 5c: add x10, x1, x10 60: lsl x11, x2, #3 64: ldr x11, [x10,x11] 68: cbz x11, 0x0000000000000080 [...] Fixes: ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-23bpf, x64: implement retpoline for tail callDaniel Borkmann2-4/+42
Implement a retpoline [0] for the BPF tail call JIT'ing that converts the indirect jump via jmp %rax that is used to make the long jump into another JITed BPF image. Since this is subject to speculative execution, we need to control the transient instruction sequence here as well when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop. The latter aligns also with what gcc / clang emits (e.g. [1]). JIT dump after patch: # bpftool p d x i 1 0: (18) r2 = map[id:1] 2: (b7) r3 = 0 3: (85) call bpf_tail_call#12 4: (b7) r0 = 2 5: (95) exit With CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000072 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000072 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000072 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: callq 0x000000000000006d |+ 66: pause | 68: lfence | 6b: jmp 0x0000000000000066 | 6d: mov %rax,(%rsp) | 71: retq | 72: mov $0x2,%eax [...] * relative fall-through jumps in error case + retpoline for indirect jump Without CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000063 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000063 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000063 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: jmpq *%rax |- 63: mov $0x2,%eax [...] * relative fall-through jumps in error case - plain indirect jump as before [0] https://support.google.com/faqs/answer/7625886 [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2b Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-16 12:51:45 +0300