summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-03-14power_supply: Change ownership from driver to coreKrzysztof Kozlowski82-1839/+2296
Change the ownership of power_supply structure from each driver implementing the class to the power supply core. The patch changes power_supply_register() function thus all drivers implementing power supply class are adjusted. Each driver provides the implementation of power supply. However it should not be the owner of power supply class instance because it is exposed by core to other subsystems with power_supply_get_by_name(). These other subsystems have no knowledge when the driver will unregister the power supply. This leads to several issues when driver is unbound - mostly because user of power supply accesses freed memory. Instead let the core own the instance of struct 'power_supply'. Other users of this power supply will still access valid memory because it will be freed when device reference count reaches 0. Currently this means "it will leak" but power_supply_put() call in next patches will solve it. This solves invalid memory references in following race condition scenario: Thread 1: charger manager Thread 2: power supply driver, used by charger manager THREAD 1 (charger manager) THREAD 2 (power supply driver) ========================== ============================== psy = power_supply_get_by_name() Driver unbind, .remove power_supply_unregister() Device fully removed psy->get_property() The 'get_property' call is executed in invalid context because the driver was unbound and struct 'power_supply' memory was freed. This could be observed easily with charger manager driver (here compiled with max17040 fuel gauge): $ cat /sys/devices/virtual/power_supply/cm-battery/capacity & $ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind [ 55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 55.732584] pgd = d98d4000 [ 55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000 [ 55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 55.746210] Modules linked in: [ 55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G W 3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496 [ 55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000 [ 55.771647] PC is at 0x0 [ 55.774182] LR is at charger_get_property+0x2f4/0x36c [ 55.779201] pc : [<00000000>] lr : [<c034b0b4>] psr: 60000013 [ 55.779201] sp : daf55e90 ip : 00000003 fp : 00000000 [ 55.790657] r10: 00000000 r9 : c06e2878 r8 : d9b26c68 [ 55.795865] r7 : dad81610 r6 : daec7410 r5 : daf55ebc r4 : 00000000 [ 55.802367] r3 : 00000000 r2 : daf55ebc r1 : 0000002a r0 : d9b26c68 [ 55.808879] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 55.815994] Control: 10c5387d Table: 598d406a DAC: 00000015 [ 55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210) [ 55.827451] Stack: (0xdaf55e90 to 0xdaf56000) [ 55.831795] 5e80: 60000013 c01459c4 0000002a c06f8ef8 [ 55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4 [ 55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80 [ 55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001 [ 55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000 [ 55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000 [ 55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124 [ 55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550 [ 55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364 [ 55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c [ 55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000 [ 55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000 [ 55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c) [ 55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48) [ 55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104) [ 55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28) [ 55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484) [ 55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c) [ 55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100) [ 55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c) [ 55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 56.000626] Code: bad PC value [ 56.011652] ---[ end trace 7b64343fbdae8ef1 ]--- Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [for the nvec part] Reviewed-by: Marc Dietrich <marvin24@gmx.de> [for compal-laptop.c] Acked-by: Darren Hart <dvhart@linux.intel.com> [for the mfd part] Acked-by: Lee Jones <lee.jones@linaro.org> [for the hid part] Acked-by: Jiri Kosina <jkosina@suse.cz> [for the acpi part] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14power_supply: charger-manager: Use power_supply_*() API for accessing ↵Krzysztof Kozlowski1-17/+20
function attrs Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14power_supply: bq2415x_charger: Use power_supply_*() API for accessing ↵Krzysztof Kozlowski1-1/+2
function attrs Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14power_supply: apm_power: Use power_supply_*() API for accessing function attrsKrzysztof Kozlowski1-2/+2
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14mfd: ab8500: Use power_supply_*() API for accessing function attrsKrzysztof Kozlowski1-3/+4
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14power_supply: ab8500: Use power_supply_*() API for accessing function attrsKrzysztof Kozlowski4-5/+5
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14power_supply: 88pm860x_charger: Use power_supply_*() API for accessing ↵Krzysztof Kozlowski1-5/+8
function attrs Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property - set_property -> power_supply_set_property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14power_supply: sysfs: Use power_supply_*() API for accessing function attrsKrzysztof Kozlowski1-3/+3
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property - set_property -> power_supply_set_property - property_is_writeable -> power_supply_property_is_writeable Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14power_supply: Add API for safe access of power supply function attrsKrzysztof Kozlowski2-1/+62
Add simple wrappers for accessing power supply's function attributes: - get_property -> power_supply_get_property - set_property -> power_supply_set_property - property_is_writeable -> power_supply_property_is_writeable - external_power_changed -> power_supply_external_power_changed This API along with atomic usage counter adds a safe way of accessing a power supply from another driver. If power supply is unregistered after obtaining reference to it by some driver, then the API wrappers won't be executed in invalid (freed) context. Next patch changing the ownership of power supply class is still needed to fully fix race conditions in accessing freed power supply. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14power_supply: Move run-time configuration to separate structureKrzysztof Kozlowski69-167/+224
Add new structure 'power_supply_config' for holding run-time initialization data like of_node, supplies and private driver data. The power_supply_register() function is changed so all power supply drivers need updating. When registering the power supply this new 'power_supply_config' should be used instead of directly initializing 'struct power_supply'. This allows changing the ownership of power_supply structure from driver to the power supply core in next patches. When a driver does not use of_node or supplies then it should use NULL as config. If driver uses of_node or supplies then it should allocate config on stack and initialize it with proper values. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> [for the nvec part] Reviewed-by: Marc Dietrich <marvin24@gmx.de> [for drivers/platform/x86/compal-laptop.c] Reviewed-by: Darren Hart <dvhart@linux.intel.com> [for drivers/hid/*] Reviewed-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14power_supply: Add driver private dataKrzysztof Kozlowski2-0/+10
Allow drivers to store private data inside power_supply structure for later usage in power supply operations. Usage of driver private data is necessary to access driver's state container object from power supply calls (like get_property()) if struct 'power_supply' is a stored there as a pointer, for example: struct some_driver_info { struct i2c_client *client; struct power_supply *power_supply; ... } In such case one cannot use container_of() and must store pointer to state container as private data. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14compal-laptop: Check return value of power_supply_registerKrzysztof Kozlowski1-1/+3
The return value of power_supply_register() call was not checked and even on error probe() function returned 0. If registering failed then during unbind the driver tried to unregister power supply which was not actually registered. This could lead to memory corruption because power_supply_unregister() unconditionally cleans up given power supply. Fix this by checking return status of power_supply_register() call. In case of failure, clean up sysfs entries and fail the probe. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 9be0fcb5ed46 ("compal-laptop: add JHL90, battery & hwmon interface") Cc: <stable@vger.kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-14compal-laptop: Fix leaking hwmon deviceKrzysztof Kozlowski1-3/+3
The commit c2be45f09bb0 ("compal-laptop: Use devm_hwmon_device_register_with_groups") wanted to change the registering of hwmon device to resource-managed version. It mostly did it except the main thing - it forgot to use devm-like function so the hwmon device leaked after device removal or probe failure. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: c2be45f09bb0 ("compal-laptop: Use devm_hwmon_device_register_with_groups") Cc: <stable@vger.kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-09power: generic-adc-battery: Fix power_supply_property returned valueNicolas Saenz Julienne1-1/+1
The POWER_SUPPLY_PROP_STATUS case in gab_get_property() wasn't providing any value. Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-07ab8500_fg.c: only request threaded IRQs when necessaryValentin Rothberg1-13/+33
All 5 IRQ handlers of the driver are requested as threaded interrupt handlers. However, only 1 handler can block. The remaining 4 handlers defer the actual handling to a workqueue. Hence, 4 of 5 IRQ handlers have a considerable overhead, since they are executed in a kernel thread to schedule another kernel thread (workqueue). This change splits up the 5 interrupt handlers into top halves (_th) and bottom halves (_bh) and resolves the aforementioned overhead by only requesting threaded interrupts (i.e., bottom halves) when necessary. Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-07X-Power AXP288 PMIC Fuel Gauge DriverTodd Brandt3-0/+1161
New power_supply driver at driver/power which interfaces with the axp20x mfd driver as a cell. Provides battery info, monitors for changes, and generates alerts on temperature and capacity issues Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-07mfd/axp20x: change battery cell name to fuel gaugeTodd Brandt1-4/+4
Name changes to the battery cell structure to a more generic cell type: fuel gauge. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-07bq2415x_charger: Add support for bq24157sAnda-Maria Nicolae1-0/+8
This patch adds bq24157s charger in the list of supported chargers. bq24157s is similar to bq24158, except for Bit6 from Special Charger Voltage/Enable Pin Status register, but this register is currently not used by bq2415x_charger. Signed-off-by: Anda-Maria Nicolae <anda-maria.nicolae@intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-07bq2415x_charger: Remove unnecessary else after returnAnda-Maria Nicolae1-16/+8
Fix coding style to comply with checkpatch.pl Signed-off-by: Anda-Maria Nicolae <anda-maria.nicolae@intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-02power/smb347-charger.c: set IRQF_ONESHOT flag to ensure IRQ requestValentin Rothberg1-1/+2
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request may fail. Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-28power: bq27x00_battery: add bq27510 supportAlexandre Belloni1-5/+45
Add support for bq27510 to the bq27x00 driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-26power_supply core: support use of devres to register/unregister a power supply.NeilBrown2-0/+49
Using devm_power_supply_register allows the unregister to happen automatically on error or final put. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-26bq2415x_charger, bq27x00_battery.c: comment cleanupsPavel Machek2-10/+1
Cleanup comments for bq2415x_charger, bq27x00_battery.c. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-26ab8500_fg: use jiffies_to_msecs for jiffies conversionNicholas Mc Guire1-2/+2
Converting jiffies to milliseconds by "val * 1000 / HZ" is technically OK but jiffies_to_msecs(val) is the cleaner solution and handles all corner cases correctly. This is a minor API consolidation only and should make things more readable. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-26ab8500_fg: match return type of wait_for_completion_timeoutNicholas Mc Guire1-2/+2
return type of wait_for_completion_timeout is unsigned long not int. as timeout is used for wait_for_completion_timeout exclusively here its type is simply changed to unsigned long. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-26power_supply: ab8500_fg: Simplify creation and removal of sysfs entriesKrzysztof Kozlowski1-18/+11
Simplify a little ab8500_fg_sysfs_psy_create_attrs () and ab8500_fg_sysfs_psy_remove_attrs() functions because they received pointer to power supply device which was then converted into power supply instance. Then it was converted into struct ab8500_fg. The path looked like: ab8500_fg->psy.dev -> psy -> ab8500_fg Instead just pass pointer to struct ab8500_fg directly so all conversions won't be necessary. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-26Merge branch 'fixes' into nextSebastian Reichel3-5/+28
2015-02-26power_supply: lp8788-charger: Fix leaked power supply on probe failKrzysztof Kozlowski1-1/+3
Driver forgot to unregister charger power supply if registering of battery supply failed in probe(). In such case the memory associated with power supply leaked. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 98a276649358 ("power_supply: Add new lp8788 charger driver") Cc: <stable@vger.kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-26power_supply: ipaq_micro_battery: Check return values in probeKrzysztof Kozlowski1-2/+19
The return values of create_singlethread_workqueue() and power_supply_register() calls were not checked and even on error probe() function returned 0. 1. If allocation of workqueue failed (returning NULL) then further accesses could lead to NULL pointer dereference. The queue_delayed_work() expects workqueue to be non-NULL. 2. If registration of power supply failed then during unbind the driver tried to unregister power supply which was not actually registered. This could lead to memory corruption because power_supply_unregister() unconditionally cleans up given power supply. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 00a588f9d27f ("power: add driver for battery reading on iPaq h3xxx") Cc: <stable@vger.kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-26power_supply: ipaq_micro_battery: Fix leaking workqueueKrzysztof Kozlowski1-0/+1
Driver allocates singlethread workqueue in probe but it is not destroyed during removal. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 00a588f9d27f ("power: add driver for battery reading on iPaq h3xxx") Cc: <stable@vger.kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-26power_supply: twl4030_madc: Check return value of power_supply_registerKrzysztof Kozlowski1-2/+5
The return value of power_supply_register() call was not checked and even on error probe() function returned 0. If registering failed then during unbind the driver tried to unregister power supply which was not actually registered. This could lead to memory corruption because power_supply_unregister() unconditionally cleans up given power supply. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: da0a00ebc239 ("power: Add twl4030_madc battery driver.") Cc: <stable@vger.kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25power_supply: max17042: Use regmap_update_bits instead read and writeKrzysztof Kozlowski1-6/+4
Consolidate regmap_read() and regmap_write() into one regmap_update_bits() call. This is more readable and safer because regmap's mutex will prevent any concurrent access to modified registers (the concurrent access could happen through max17042_init_chip() in scheduled work). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25power_supply: max17040: Use system efficient workqueuesKrzysztof Kozlowski1-3/+6
The scheduled work in max17040_battery driver reads device parameters and stores them in memory. Any CPU could do that so use system efficient workqueues to limit unnecessary CPU wake ups. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25power_supply: max14577: Properly handle error conditionsKrzysztof Kozlowski1-36/+73
Re-work and fix handling of errors when retrieving power supply properties: 1. Return errno values directly from get_property() instead of storing 'unknown' as intval for given property. 2. Handle regmap_read() errors and return errno code. Previously the regmap_read() return code was ignored so an uninitialized value from the stack could be used for calculating the property. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25power_supply: max14577: Don't store charging and battery states for laterKrzysztof Kozlowski1-5/+0
Remove caching of charging and battery states in driver's state container because the cached value was not used later. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25power_supply: max77693: Properly handle error conditionsKrzysztof Kozlowski1-44/+55
Re-work and fix handling of errors when retrieving power supply properties: 1. Return errno values directly from get_property() instead of storing 'unknown' as intval for given property. 2. Handle regmap_read() errors when getting 'online' and 'present' proprties and return errno code. Previously the regmap_read() return code was ignored so an uninitialized value from the stack could be used for calculating the property. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25power: Use subdir-ccflags-* to inherit debug flagGeert Uytterhoeven1-1/+1
Use subdir-ccflags-* instead of ccflags-* to inherit the debug settings from Kconfig when traversing subdirectories. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25bq27x00_battery: register as non-wakeup power supply.NeilBrown1-1/+1
power_supply status changes for the bq27x00 are only noticed via polling, not via interrupts. So they are never the source of events which should reliably wake the system from suspend. So it is appropriate to register as a no_ws power source, just like the ACPI battery. This removes some debugging messages which occasionally confusingly identify bq27x00 as a wakeup source. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25power_supply: rt5033: Constify struct regmap_configKrzysztof Kozlowski1-1/+1
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25MAINTAINERS: Include DA9150 files in Dialog Semiconductor support list.Adam Thomson1-0/+4
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25power: da9150: Add DT binding documentation for chargerAdam Thomson1-0/+26
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25power: Add support for DA9150 ChargerAdam Thomson3-0/+701
This patch adds support for DA9150 Charger & Fuel-Gauge IC Charger. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25Merge branch 'da9150-charger-fuelgauge' into nextSebastian Reichel4-0/+433
2015-02-25power: ltc2941-battery-gauge: Fix typo in conversion formula (58 instead of 85)Mike Looijmans1-1/+1
The driver reported 30% less than actually measured. This turned out to be caused by a simple typo in the formula to calculate the LSB quantity. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25iio: da9150: Add DT binding documentation for GPADCAdam Thomson1-0/+16
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25iio: Add support for DA9150 GPADCAdam Thomson3-0/+417
This patch adds support for DA9150 Charger & Fuel-Gauge IC GPADC. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25power: ltc2941-battery-gauge: Fix typo in conversion formula (58 instead of 85)Mike Looijmans1-1/+1
The driver reported 30% less than actually measured. This turned out to be caused by a simple typo in the formula to calculate the LSB quantity. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-23Linux 4.0-rc1Linus Torvalds1-4/+4
.. after extensive statistical analysis of my G+ polling, I've come to the inescapable conclusion that internet polls are bad. Big surprise. But "Hurr durr I'ma sheep" trounced "I like online polls" by a 62-to-38% margin, in a poll that people weren't even supposed to participate in. Who can argue with solid numbers like that? 5,796 votes from people who can't even follow the most basic directions? In contrast, "v4.0" beat out "v3.20" by a slimmer margin of 56-to-44%, but with a total of 29,110 votes right now. Now, arguably, that vote spread is only about 3,200 votes, which is less than the almost six thousand votes that the "please ignore" poll got, so it could be considered noise. But hey, I asked, so I'll honor the votes.
2015-02-23Merge tag 'ext4_for_linus' of ↵Linus Torvalds5-56/+108
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes. We also reserved code points for encryption and read-only images (for which the implementation is mostly just the reserved code point for a read-only feature :-)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix indirect punch hole corruption ext4: ignore journal checksum on remount; don't fail ext4: remove duplicate remount check for JOURNAL_CHECKSUM change ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize ext4: support read-only images ext4: change to use setup_timer() instead of init_timer() ext4: reserve codepoints used by the ext4 encryption feature jbd2: complain about descriptor block checksum errors
2015-02-23Merge branch 'for-linus-2' of ↵Linus Torvalds70-758/+907
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted stuff from this cycle. The big ones here are multilayer overlayfs from Miklos and beginning of sorting ->d_inode accesses out from David" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits) autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation procfs: fix race between symlink removals and traversals debugfs: leave freeing a symlink body until inode eviction Documentation/filesystems/Locking: ->get_sb() is long gone trylock_super(): replacement for grab_super_passive() fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) SELinux: Use d_is_positive() rather than testing dentry->d_inode Smack: Use d_is_positive() rather than testing dentry->d_inode TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR() Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb VFS: Split DCACHE_FILE_TYPE into regular and special types VFS: Add a fallthrough flag for marking virtual dentries VFS: Add a whiteout dentry type VFS: Introduce inode-getting helpers for layered/unioned fs environments Infiniband: Fix potential NULL d_inode dereference posix_acl: fix reference leaks in posix_acl_create autofs4: Wrong format for printing dentry ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-24 07:55:49 +0300