summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-07-25ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoMMarek Vasut1-1/+0
[ Upstream commit 5247a50c8b53ca214a488da648e1bb35c35c2597 ] Fix the following dtbs_check warning: touchscreen@38: 'linux,wakeup' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supplyGrzegorz Szymaszek1-1/+1
[ Upstream commit f493162319788802b6a49634f7268e691b4c10ec ] The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC supply set to v3v3 (buck4), the same as the VMMC supply. That was incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3) instead. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7Alexandre Torgue1-1/+1
[ Upstream commit 11aaf2a0f8f070e87833775965950157bf57e49a ] It prevents the following warning: pin-controller@50002000: 'ltdc' does not match any of the regexes: '-[0-9]*$', '^gpio@[0-9a-f]*$', 'pinctrl-[0-9]+' Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15Alexandre Torgue1-6/+6
[ Upstream commit fb1406335c067be074eab38206cf9abfdce2fb0b ] It fixes the following warning seen running "make dtbs_check W=1" Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty reg/ranges property Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warningsAlexandre Torgue1-2/+2
[ Upstream commit ad0ed10ba5792064fc3accbf8f0341152a57eecb ] Replace upper case by lower case in i2c nodes name. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: rockchip: fix supply properties in io-domains nodesJohan Jonker2-3/+3
[ Upstream commit f07edc41220b14ce057a4e6d7161b30688ddb8a2 ] A test with rockchip-io-domain.yaml gives notifications for supply properties in io-domains nodes. Fix them all into ".*-supply$" format. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210606181632.13371-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: juno: Update SCPI nodes as per the YAML schemaSudeep Holla1-3/+3
[ Upstream commit 70010556b158a0fefe43415fb0c58347dcce7da0 ] The SCPI YAML schema expects standard node names for clocks and power domain controllers. Fix those as per the schema for Juno platforms. Link: https://lore.kernel.org/r/20210608145133.2088631-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25i3c: master: svc: drop free_irq of devm_request_irq allocated irqYang Yingliang1-1/+0
[ Upstream commit 59a61e69c4252b4e8ecd15e752b0d2337f0121b7 ] irq allocated with devm_request_irq() will be freed in devm_irq_release(), using free_irq() in ->remove() will causes a dangling pointer, and a subsequent double free. So remove the free_irq() in svc_i3c_master_remove(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210602084935.3977636-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: bcm283x: Fix up GPIO LED node namesStefan Wahren15-21/+21
[ Upstream commit 5f30dacf37bc93308e91e4d0fc94681ca73f0f91 ] Fix the node names for the GPIO LEDs to conform to the standard node name led-.. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-6-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: bcm283x: Fix up MMC node namesStefan Wahren2-2/+2
[ Upstream commit f230c32349eb0a43a012a81c08a7f13859b86cbb ] Fix the node names for the MMC/SD card controller to conform to the standard node name mmc@.. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1622981777-5023-2-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: aspeed: Everest: Fix cable card PCA chipsSantosh Puranik1-85/+83
[ Upstream commit 010da3daf9278ed03d38b7dcb0422f1a7df1bdd3 ] Correct two PCA chips which were placed on the wrong I2C bus and address. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selectedSudeep Holla1-0/+2
[ Upstream commit ab7766b72855e6a68109b915d071181b93086e29 ] 0day CI kernel test robot reported following build error with randconfig aarch64-linux-ld: drivers/firmware/arm_scmi/driver.o:(.rodata+0x1e0): undefined reference to `scmi_mailbox_desc' Fix the error by adding CONFIG_MAILBOX dependency for scmi_mailbox_desc. Link: https://lore.kernel.org/r/20210603072631.1660963-1-sudeep.holla@arm.com Cc: Etienne Carriere <etienne.carriere@linaro.org> Cc: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Tested-by: Cristian Marussi <cristian.marussi@arm.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25firmware: arm_scmi: Add SMCCC discovery dependency in KconfigEtienne Carriere2-2/+2
[ Upstream commit c05b07963e965ae34e75ee8c33af1095350cd87e ] ARM_SCMI_PROTOCOL depends on either MAILBOX or HAVE_ARM_SMCCC_DISCOVERY, not MAILBOX alone. Fix the depedency in Kconfig file and driver to reflect the same. Link: https://lore.kernel.org/r/20210521134055.24271-1-etienne.carriere@linaro.org Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> [sudeep.holla: Minor tweaks to subject and change log] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25memory: tegra: Fix compilation warnings on 64bit platformsDmitry Osipenko2-4/+4
[ Upstream commit e0740fb869730110b36a4afcf05ad1b9d6f5fb6d ] Fix compilation warning on 64bit platforms caused by implicit promotion of 32bit signed integer to a 64bit unsigned value which happens after enabling compile-testing of the EMC drivers. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warningsAlexandre Torgue3-20/+0
[ Upstream commit 2388f14d8747f8304e26ee870790e188c9431efd ] Prevent warning seen with "make dtbs_check W=1" command: Warning (avoid_unnecessary_addr_size): /soc/timers@40001c00: unnecessary address-cells/size-cells without "ranges" or child "reg" property Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix RCC node name on stm32f429 MCUAlexandre Torgue1-1/+1
[ Upstream commit e4b948415a89a219d13e454011cdcf9e63ecc529 ] This prevent warning observed with "make dtbs_check W=1" Warning (simple_bus_reg): /soc/rcc@40023810: simple-bus unit address format error, expected "40023800" Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix gpio-keys node on STM32 MCU boardsAlexandre Torgue5-21/+11
[ Upstream commit bf24b91f4baf7e421c770a1d9c7d381b10206ac9 ] Fix following warning observed with "make dtbs_check W=1" command. It concerns f429 eval and disco boards, f769 disco board. Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name, but no reg or ranges property Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: fix stm32mp157c-odyssey card detect pinGrzegorz Szymaszek1-1/+1
[ Upstream commit 0171b07373cc8c2815ca5fa79a7308fdefa54ca4 ] The microSD card detect pin is physically connected to the MPU pin PI3. The Device Tree configuration of the card detect pin was wrong—it was set to pin PB7 instead. If such configuration was used, the kernel would hang on “Waiting for root device” when booting from a microSD card. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2Marek Vasut1-2/+2
[ Upstream commit 4b5fadef3fc2ab8863ffdf31eed6a745b1bf6e61 ] Fix make dtbs_check warning: arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml:0:0: /soc/i2c@40015000/polytouch@38: failed to match any schema with compatible: ['edt,edt-ft5x06'] Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2Marek Vasut1-2/+0
[ Upstream commit 28b9a4679d8074512f12967497c161b992eb3b75 ] Fix make dtbs_check warning: arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys-polled: '#address-cells' is a dependency of '#size-cells' arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys: '#address-cells' is a dependency of '#size-cells' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: qcom: sc7180: Move rmtfs memory regionSujit Kautkar1-1/+1
[ Upstream commit d4282fb4f8f9683711ae6c076da16aa8e675fdbd ] Move rmtfs memory region so that it does not overlap with system RAM (kernel data) when KAsan is enabled. This puts rmtfs right after mba_mem which is not supposed to increase beyond 0x94600000 Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Sujit Kautkar <sujitka@chromium.org> Link: https://lore.kernel.org/r/20210514113430.1.Ic2d032cd80424af229bb95e2c67dd4de1a70cb0c@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: qcom: sm8250: fix display nodesJonathan Marek1-2/+2
[ Upstream commit dc5d91250ae6b810bc8d599d8d6590a06a4ce84a ] Use sm8250 compatibles instead of sdm845 compatibles Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210329120051.3401567-5-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: qcom: sm8350: fix the node unit addressesVinod Koul1-3/+3
[ Upstream commit 1dee9e3b0997fef7170f7ea2d8eab47d0cd334d8 ] Some node unit addresses were put wrongly in the dts, resulting in below warning when run with W=1 arch/arm64/boot/dts/qcom/sm8350.dtsi:693.34-702.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c222000: simple-bus unit address format error, expected "c263000" arch/arm64/boot/dts/qcom/sm8350.dtsi:704.34-713.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c223000: simple-bus unit address format error, expected "c265000" arch/arm64/boot/dts/qcom/sm8350.dtsi:1180.32-1185.5: Warning (simple_bus_reg): /soc@0/interconnect@90e0000: simple-bus unit address format error, expected "90c0000" Fix by correcting to the correct address as given in reg node Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210513060733.382420-1-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variantDmitry Osipenko1-1/+1
[ Upstream commit c4dd6066bc304649e3159f1c7a08ece25d537e00 ] The 3v3 regulator GPIO is GP6 and not GP7, which is the DDR regulator. Both regulators are always-on, nevertheless the DT model needs to be corrected, fix it. Reported-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-treesDmitry Osipenko8-8/+8
[ Upstream commit 5f45da704de425d74abd75feaa928fc8a3df03ba ] All Tegra boards which use WM8903 audio codec are specifying a wrong polarity for the headphones detection GPIO. The kernel driver hardcodes the polarity to active-low, which is the correct polarity, so we can fix the device-trees safely. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC ↵Grygorii Strashko3-3/+3
direction [ Upstream commit 69db725cdb2b803af67897a08ea54467d11f6020 ] The MCU RGMII MCU_RGMII1_TXC pin is defined as input by mistake, although this does not make any difference functionality wise it's better to update to avoid confusion. Hence fix MCU RGMII MCU_RGMII1_TXC pin pinmux definitions to be an output in K3 am654x/j721e/j7200 board files. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20210526132041.6104-1-grygorii.strashko@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: tegra: Add PMU node for Tegra194Jon Hunter1-0/+14
[ Upstream commit 9e79e58f330ea4860f2ced65a8a35dfb05fc03c1 ] Populate the device-tree node for the PMU device on Tegra194. This also fixes the following warning that is observed on booting Tegra194. ERR KERN kvm: pmu event creation failed -2 Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: OMAP2+: Replace underscores in sub-mailbox node namesSuman Anna8-20/+20
[ Upstream commit 9e7f5ee1137397def6580461e27e5efcb68183ee ] A number of sub-mailbox node names in various OMAP2+ dts files are currently using underscores. This is not adhering to the node name convention, fix all of these to use hiphens. These nodes are already using the prefix mbox, so they will be in compliance with the sub-mailbox node name convention being added in the OMAP Mailbox YAML binding as well. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: am335x: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko5-6/+6
[ Upstream commit d7d30b8fcd111e9feb171023c0e0c8d855582dcb ] The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko2-2/+5
[ Upstream commit 2566d5b8c1670f7d7a44cc1426d254147ec5c421 ] The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpiosGrygorii Strashko2-5/+4
[ Upstream commit b644c5e01c870056e13a096e14b9a92075c8f682 ] The ti,no-reset-on-init flag need to be at the interconnect target module level for the modules that have it defined. The ti-sysc driver handles this case, but produces warning, not a critical issue. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25kbuild: sink stdout from cmd for silent buildMasahiro Yamada1-1/+6
[ Upstream commit 174a1dcc96429efce4ef7eb2f5c4506480da2182 ] When building with 'make -s', no output to stdout should be printed. As Arnd Bergmann reported [1], mkimage shows the detailed information of the generated images. I think this should be suppressed by the 'cmd' macro instead of by individual scripts. Insert 'exec >/dev/null;' in order to redirect stdout to /dev/null for silent builds. [Note about this implementation] 'exec >/dev/null;' may look somewhat tricky, but this has a reason. Appending '>/dev/null' at the end of command line is a common way for redirection, so I first tried this: cmd = @set -e; $(echo-cmd) $(cmd_$(1)) >/dev/null ... but it would not work if $(cmd_$(1)) itself contains a redirection. For example, cmd_wrap in scripts/Makefile.asm-generic redirects the output from the 'echo' command into the target file. It would be expanded into: echo "#include <asm-generic/$*.h>" > $@ >/dev/null Then, the target file gets empty because the string will go to /dev/null instead of $@. Next, I tried this: cmd = @set -e; $(echo-cmd) { $(cmd_$(1)); } >/dev/null The form above would be expanded into: { echo "#include <asm-generic/$*.h>" > $@; } >/dev/null This works as expected. However, it would be a syntax error if $(cmd_$(1)) is empty. When CONFIG_TRIM_UNUSED_KSYMS is disabled, $(call cmd,gen_ksymdeps) in scripts/Makefile.build would be expanded into: set -e; { ; } >/dev/null ..., which causes an syntax error. I also tried this: cmd = @set -e; $(echo-cmd) ( $(cmd_$(1)) ) >/dev/null ... but this causes a syntax error for the same reason. So, finally I adopted: cmd = @set -e; $(echo-cmd) exec >/dev/null; $(cmd_$(1)) [1]: https://lore.kernel.org/lkml/20210514135752.2910387-1-arnd@kernel.org/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: renesas: beacon: Fix USB ref clock referencesAdam Ford1-2/+2
[ Upstream commit ebc666f39ff67a01e748c34d670ddf05a9e45220 ] The RZ/G2 boards expect there to be an external clock reference for USB2 EHCI controllers. For the Beacon boards, this reference clock is controlled by a programmable versaclock. Because the RZ/G2 family has a special clock driver when using an external clock, the third clock reference in the EHCI node needs to point to this special clock, called usb2_clksel. Since the usb2_clksel does not keep the usb_extal clock enabled, the 4th clock entry for the EHCI nodes needs to reference it to keep the clock running and make USB functional. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20210513114617.30191-2-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: renesas: beacon: Fix USB extal referenceAdam Ford1-2/+4
[ Upstream commit 56bc54496f5d6bc638127bfc9df3742cbf0039e7 ] The USB extal clock reference isn't associated to a crystal, it's associated to a programmable clock, so remove the extal reference, add the usb2_clksel. Since usb_extal is referenced by the versaclock, reference it here so the usb2_clksel can get the proper clock speed of 50MHz. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20210513114617.30191-1-aford173@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25rtc: mxc_v2: add missing MODULE_DEVICE_TABLEBixuan Cui1-0/+1
[ Upstream commit 206e04ec7539e7bfdde9aa79a7cde656c9eb308e ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210508031509.53735-1-cuibixuan@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Fix orientation of Janice accelerometerLinus Walleij1-4/+3
[ Upstream commit e409c1e1d5cb164361229e3a3f084e4a32544fb6 ] This fixes up the axis on the Janice accelerometer to give the right orientation according to tests. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE valueOleksij Rempel1-0/+2
[ Upstream commit 723de6a4126b2474a8106e943749e1554012dad6 ] Without SoC specific PHY fixups the network interface on this board will fail to work. Provide missing DT properties to make it work again. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Fix some compatible stringsLinus Walleij3-4/+6
[ Upstream commit 59ba546d1662c4beb738725965041f350afe24b4 ] The Golden and Skomer phones have BCM4334 WLAN+BT chips, so make the compatible strings reflect the new available bindings for these. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Fix orientation of accelerometerLinus Walleij1-0/+3
[ Upstream commit 4beba4011995a2c44ee27e1d358dc32e6b9211b3 ] This adds a mounting matrix to the accelerometer on the TVK1281618 R3. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Rename gpio-controller nodeSebastian Reichel5-5/+5
[ Upstream commit 4917b702818872fdf2a9973705af3aa7d3d1f19e ] Rename the AB8500 gpio controller node from ab8500-gpio to ab8500-gpiocontroller, since -gpio is a common suffix for gpio consumers. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: ux500: Fix interrupt cellsSebastian Reichel2-24/+24
[ Upstream commit e4ff0112a03c2e353c8457cd33c88feb89dfec41 ] Fix interrupt cells in DT AB8500/AB8505 source files. The compiled DTB files will stay the same. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25arm64: dts: rockchip: fix regulator-gpio states arrayJohan Jonker5-9/+9
[ Upstream commit b82f8e2992534aab0fa762a37376be30df263701 ] A test with the command below gives this error: /arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml: sdmmcio-regulator: states:0: [1800000, 1, 3300000, 0] is too long dtbs_check expects regulator-gpio states in a format of 2 per item, so fix them all. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/ regulator/gpio-regulator.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210510215840.16270-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_infoJonathan Neuschäfer1-2/+2
[ Upstream commit 89b759469d525f4d5f9c29cd3b1f490311c67f85 ] The name of the struct, as defined in arch/arm/mach-imx/pm-imx5.c, is imx5_cpu_suspend_info. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: imx6: phyFLEX: Fix UART hardware flow controlPrimoz Fiser1-2/+3
[ Upstream commit 14cdc1f243d79e0b46be150502b7dba9c5a6bdfd ] Serial interface uart3 on phyFLEX board is capable of 5-wire connection including signals RTS and CTS for hardware flow control. Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add missing property "uart-has-rtscts" to allow serial interface to be configured and used with the hardware flow control. Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25soc: mediatek: add missing MODULE_DEVICE_TABLEZou Wei1-0/+1
[ Upstream commit ba96de3ae5a7e2121cac80053b277eb2ab51a0ae ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1620705350-104687-1-git-send-email-zou_wei@huawei.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25soc: bcm: brcmstb: remove unused variable 'brcmstb_machine_match'Jiapeng Chong1-5/+0
[ Upstream commit c1f512182c54dc87efd2f7ac19f16a49ff8bb19e ] Fix the following clang warning: drivers/soc/bcm/brcmstb/common.c:17:34: warning: unused variable 'brcmstb_machine_match' [-Wunused-const-variable]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: BCM5301X: Fix pinmux subnodes namesRafał Miłecki2-4/+4
[ Upstream commit bb95d7d440fefd104c593d9cb20da6d34a474e97 ] This matches pinmux-node.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: Hurricane 2: Fix NAND nodes namesRafał Miłecki1-1/+1
[ Upstream commit a4528d9029e2eda16e4fc9b9da1de1fbec10ab26 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: dts: BCM63xx: Fix NAND nodes namesRafał Miłecki2-3/+3
[ Upstream commit 75e2f012f6e34b93124d1d86eaa8f27df48e9ea0 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25ARM: NSP: dts: fix NAND nodes namesRafał Miłecki9-17/+17
[ Upstream commit 0484594be733d5cdf976f55a2d4e8d887f351b69 ] This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-15 14:34:10 +0300