summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-11-03dts: starfive: Replace sf to starfiveJianlong Huang3-308/+308
Because upstream requirement. Replace sf to starfive. Replace hdmi_output to rgb_output. Replace encoder to dsi_output Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-03dts: starfive: Add wm8960 and ac108 dtsJianlong Huang4-27/+40
Add wm8960 and ac108 dts base default dts Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-03configs: starfive: sync jh7110 config to visionfive2Jianlong Huang1-1/+2
sync jh7110 config to visionfive2 about audio config Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-03riscv: dts: Change the cpu_vdd_0p9 to cpu_vddmason.huo1-3/+3
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
2022-11-03dts: starfive: Add ac108 dts configjianlonghuang2-12/+17
Add ac108 dts Signed-off-by: jianlonghuang <jianlong.huang@starfivetech.com>
2022-11-03dts: starfive: update vf2 dts base on new board A1.1Jianlong Huang4-789/+998
reserve vf2 old board A1.0 dts as jh7110-visionfive-v2-A10.dts new board A1.1 dts as default, jh7110-visionfive-v2.dts vf2 dts common as jh7110-visionfive-v2.dtsi Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-03dts: starfive: Add ac108 dts configJianlong Huang3-9/+21
Add ac108 dts and config Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-03Revert "v4l2: imx219 use pinctrl"Jianlong Huang3-101/+5
This patch just for evb This reverts commit 8d7c702d7bc0fef9ee5882db660390801bbccaa7.
2022-11-03dts: starfive: sync evb dts and configJianlong Huang2-14/+15
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-03riscv: configs: jh7110: Enable StarFive dwmacyanhong.wang1-1/+2
Enable StarFive dwmac. Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
2022-11-03dts: starfive: modify sdio0 configJianlong Huang1-5/+4
set hs400es mode to promote read and write speed Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-03dts: starfive: Modified PCIe pin setting for bring up PCIe USB hub.Kevin.xie2-39/+43
Based on VisionFive V2 SCH. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2022-11-03dts: starfive: Add overlay dtsJianlong Huang5-1/+84
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-03riscv: configs: Fix the pmic config from jh7110 to visionfive2Kevin.xie1-1/+1
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2022-11-03riscv:linux:drm:mipidsishengyang.chen1-5/+5
update dphy reg config for visionfive2 board Signed-off-by:shengyang.chen<shengyang.chen@starfivetech.com>
2022-11-03v4l2: add imx219 supportchanghuang.liang8-35/+73
dts: add imx219 configure Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
2022-11-03riscv:dts:starfive-visionfive2: Add ethernet-phy node to set delay_chainJianlong Huang1-4/+11
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-03arch: riscv: Add dts & defconfig for axp15060 pmic driverKevin.xie1-0/+44
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2022-11-03dts: starfive: Add pwmdac and wm8960 configJianlong Huang2-19/+85
configs : starfive: sync JH7110_515_SDK_v1.0.0-rc2 config Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-03configs: starfive: Add at24 config and deviceJianlong Huang2-0/+7
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-03dts: starfive: Support visionfive2Jianlong Huang3-6/+1008
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-03net: phy: motorcomm: Support the YT8531 gigabit PHYJianlong Huang1-1/+1
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
2022-11-02Merge branch 'CR_2517_sec_jiajie.ho' into 'jh7110-5.15.y-devel'andy.hu1-1/+3
CR_2517_515:crypto:starfive: Fix "Unbalanced pm_runtime_enable!" warning See merge request sdk/linux!583
2022-11-02Merge branch 'CR_2522_ECO_EVB_515_samin.guo' into 'jh7110-5.15.y-devel'andy.hu2-13/+117
CR_2522：support gmac with jh7110B-evb See merge request sdk/linux!585
2022-11-02Merge branch 'CR_2395_I2C_hal.feng' into 'jh7110-5.15.y-devel'andy.hu2-2/+2
CR_2395_I2C_hal.feng See merge request sdk/linux!581
2022-11-02Merge branch 'CR_2498_spi_without_dma_devel_5.15_ziv.xu' into ↵andy.hu2-3/+5
'jh7110-5.15.y-devel' CR 2498 spi without dma devel 5.15 ziv.xu See merge request sdk/linux!582
2022-11-01dts:satrfive:jh7110: default support jh7110A gmac0Samin Guo1-2/+5
default support jh7110A gmac0 Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2022-11-01net:phy:motorcomm: support yt8521 invertedSamin Guo1-26/+36
jh7110B need yt8521 inverted. Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2022-11-01net:phy:motorcomm: support modifying RGMII_TX_CLK delay train from dtsSamin Guo1-11/+102
support use original or inverted RGMII_TX_CLK delay train. 10M/100M/1000M can be configured independently. tx_inverted_xx = val; for example: &gmac0 { #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@0 { tx_inverted_10 = <0>; tx_inverted_100 = <1>; tx_inverted_1000 = <1>; }; }; 0: original (default) 1: inverted Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
2022-11-01CR_2517:crypto:starfive: Fix "Unbalanced pm_runtime_enable!" warningJia Jie Ho1-1/+3
Crypto driver will probe multiple times waiting for DMA to be ready, each time calling pm_runtime_enable(). Only call pm_runtime_enable() when it's not already enabled. Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
2022-11-01spi-pl022-starfive.c: make spi work without dmaziv.xu2-3/+5
make spi work without dma Signed-off-by: ziv.xu <ziv.xu@starfive.com>
2022-11-01clk: starfive: Keep the clock apb0 enabled alwaysHal Feng1-1/+1
This solves crush problem of i2c runtime pm and prevents some aon modules from working abnormally. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2022-11-01Revert "i2c: designware: Descend startup priority"Hal Feng1-1/+1
This reverts commit ef0fec210073c298598ab9a27e362e002dc0bf0b. Then we keep the clock apb0 enabled always to fix crush problem of i2c runtime pm. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2022-10-28Merge branch 'CR_2412_515_Clocktree_PLL1_Xingyu.Wu' into 'jh7110-5.15.y-devel'andy.hu2-7/+1
CR_2412_515_Clocktree_PLL1_Xingyu.Wu See merge request sdk/linux!553
2022-10-28Merge branch 'CR_2440_515_Clocktree_1.5G_Xingyu.Wu' into 'jh7110-5.15.y-devel'andy.hu2-0/+36
CR_2440_515_Clocktree_1.5G_Xingyu.Wu See merge request sdk/linux!564
2022-10-28Merge branch 'CR_2439_CPUFREQ_515_mason.huo' into 'jh7110-5.15.y-devel'andy.hu7-57/+453
Cr 2439 cpufreq 515 mason.huo See merge request sdk/linux!562
2022-10-28Merge branch 'CR_2417_CPUIdle_515_mason.huo' into 'jh7110-5.15.y-devel'andy.hu2-47/+15
Cr 2417 cpu idle 515 mason.huo See merge request sdk/linux!559
2022-10-28Merge branch 'CR_2462_DEV_PM_mason.huo' into 'jh7110-5.15.y-devel'andy.hu55-837/+1826
CR_2462 Port runtime PM from hibernation to devel See merge request sdk/linux!574
2022-10-28regulator: axp15060: Change the cpu_vdd_0p9 to cpu_vddmason.huo2-3/+3
Rename the cpu_vdd_0p9 regulator to cpu_vdd, since the regulator may changed per cpu frequency. Signed-off-by: mason.huo <mason.huo@starfivetech.com>
2022-10-28driver: regulator: Add axp15060 pmic regulator driverKevin.xie5-0/+438
Add support for the axp15060 pmic. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2022-10-28cpufreq: starfive: Remove unuse clocksmason.huo1-23/+3
The jh7110 pll0 is fixed for cpufreq, so we should change the cpu_core clock directly. Remove the pll0 & osc clock. Signed-off-by: mason.huo <mason.huo@starfivetech.com>
2022-10-28riscv: defconfigs: Enable cpufreq for jh7110mason.huo1-0/+8
Set the default cpufreq govenor to ondemand. Signed-off-by: mason.huo <mason.huo@starfivetech.com>
2022-10-28riscv: dts: starfive: Remove unsupported cpu frequenciesmason.huo1-33/+3
As the pll0 is fixed, there are only four cpu frequencies that can be divided from the pll0, so remove the other cpu frequencies. Signed-off-by: mason.huo <mason.huo@starfivetech.com>
2022-10-28sound:dwc:i2s:Add hibernation about i2srx-3chXingyu Wu1-88/+58
Add runtime pm and system pm in i2srx-3ch driver. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2022-10-28sound:dwc:i2s:Add hibernation about i2stx-4ch1Xingyu Wu1-76/+56
Add runtime pm and system pm in i2stx-4ch1 driver. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2022-10-27riscv: deconfig: Enable pm advanced debugmason.huo1-0/+2
Enable pm advanced debug, so that we can check runtime PM status. Signed-off-by: mason.huo <mason.huo@starfivetech.com>
2022-10-27sound:starfive:pwmdac:Add runtime pm operationXingyu Wu1-28/+91
Add runtime pm operation in PWMDAC driver. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
2022-10-27rtc:starfive: add pm ops for rtcziv.xu1-0/+1
add pm ops for rtc Signed-off-by: ziv.xu <ziv.xu@starfive.com>
2022-10-27i2c: designware: Descend startup priorityHal Feng1-1/+1
So i2c will be initialized after uart. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2022-10-27i2c: designware: Uncomment and recover the pm functionsHal Feng1-4/+1
Uncomment the system pm and runtime pm ops functions. Restore the Synopsys DesignWare i2c driver to the original version. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-14 23:05:37 +0300