summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-03-19OMAPDSS: panel-dsi-cm: Add DT supportTomi Valkeinen1-4/+56
Add DT support for panel-dsi-cm. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-03-19OMAPDSS: Add DT support to DSITomi Valkeinen1-1/+138
Add the code to make the DSI driver work with device tree on OMAP3 and OMAP4. A minor hack is needed at the moment in the DSI driver: the DSS driver needs to know the ID number of a DSI device, as clocks are routed in different ways to the DSI devices. At the moment we don't have any proper way to manage this, so this patchs adds a simple lookup table that is used to deduce the ID from the DSI device's base address. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-03-19OMAPDSS: Add DT support to VENCTomi Valkeinen1-0/+61
Add DT support to VENC. In contrast to non-DT version, the DT version gets the invert-polarity and connector type via venc's endpoint, not from the connector. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-03-19OMAPDSS: Add DT support to HDMITomi Valkeinen1-0/+6
Add DT support to HDMI driver. The only thing needed for DT support here is the of_match_table. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-03-19OMAPDSS: Add DT support to DISPCTomi Valkeinen1-0/+8
Add DT support to DISPC. Only thing needed here is the of_match_table. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-03-19OMAPDSS: Add DT support to DSSTomi Valkeinen4-0/+164
Add DT support for DSS. Contrary to the non-DT version, the DSS in DT mode contains DPI and SDI outputs, which better reflects the hardware. The non-DT code will be removed after all boards have been converted to DT, so there's no need to change the non-DT code to act the same way. The code for DPI and SDI needs to be refined later to make it possible to add multiple DPI ports. For now, handling just a single DPI port is enough for all the boards. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-03-19OMAPDSS: Improve regulator names for DTTomi Valkeinen3-3/+12
The regulator names used for DSS components are somewhat ugly for DT use. As we're just adding DT support, it's simple to change the regulator names. This patch makes the DSS driver get the regulators with somewhat cleaner names when bootin with DT. For example, this allows us to define HDMI's VDDA regulator in the DT data as: vdda-supply = <...>; instead of vdda_hdmi_dac-supply = <...>; Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-03-19OMAPDSS: add of helpersTomi Valkeinen3-1/+174
Add helpers to get ports and endpoints from DT data. These helpers parse v4l2 style ports and endpoints, but compared to the v4l2 helpers, these allow iterating ports and endpoints separately. This is a temporary solution until we get generic code to parse the ports and endpoints. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-03-19OMAPFB: search for default display with DT aliasTomi Valkeinen1-1/+22
Improve the search for the default display in two ways: * compare the given display name to the display's alias * if no display name is given, look for "display0" DT alias Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-03-19OMAPFB: clean up default display searchTomi Valkeinen1-17/+29
Separate the code for finding the default display into a function for clarity and to make it easier to extend it in the future. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-03-19OMAPDSS: get dssdev->alias from DT aliasTomi Valkeinen1-2/+17
We currently create a "displayX" style alias name for all displays, using a number that is incremented for each registered display. With the new DSS device model there is no clear order in which the displays are registered, and thus the numbering is somewhat random. This patch improves the behavior for DT case so that if the displays have been assigned DT aliases, those aliases will be used as DSS aliases. This means that "display0" is always the one specified in the DT alias, and thus display0 can be used as default display in case the user didn't specify a default display. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-03-19OMAPDSS: add 'label' support for DTTomi Valkeinen1-0/+9
Add support to get the label (i.e. a "nickname") for a display from the DT data. If there is no label defined, use the display's alias (e.g. 'display0') as a name. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2014-03-19ARM: OMAP2+: DT 'compatible' tweak for displaysTomi Valkeinen3-0/+65
As there is no common panel framework in the kernel, we have OMAP specific panel drivers. However, the DT data should be generic. This brings the issue that some other platform could use the same panels, and would need to create a driver with the same 'compatible' string as the OMAP driver. In the long run, we have to get a common panel framework. For the time being, this patch solves the issue: At early boot time, we go through the DT nodes looking for the panels the kernel supports for OMAP. For each found node, the 'compatible' string is prepended with "omapdss,", i.e. "sony,acx565akm" becomes "omapdss,sony,acx565akm". The OMAP display drivers all have "omapdss," at the beginning of their compatible field. This allows us to have generic DT data, but OMAP specific display drivers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2014-03-19ARM: OMAP2+: add omapdss_init_of()Tomi Valkeinen5-0/+130
The OMAP display architecture requires a bunch of platform devices which are not created via .dts (for now). We also need to pass a few function pointers and the DSS hardware version from the arch code to omapdss driver. This patch adds omapdss_init_of() function, called from board-generic at init time, which handles those tasks. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2014-02-24Linux 3.14-rc4Linus Torvalds1-1/+1
2014-02-24Merge tag 'fixes-for-linus' of ↵Linus Torvalds26-48/+108
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A collection of fixes for ARM platforms. Most are fixes for DTS files, mostly from DT conversion on OMAP which is still finding a few issues here and there. There's a couple of small stale code removal patches that we usually queue for the next release instead, but they seemed harmless enough to bring in now. Also, a fix for backlight on some PXA platforms, and a cache configuration fix for Tegra, etc" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer ARM: tegra: only run PL310 init on systems with one ARM: tegra: Add head numbers to display controllers ARM: imx6: build pm-imx6q.c independently of CONFIG_PM ARM: tegra: fix RTC0 alias for Cardhu ARM: dove: dt: revert PMU interrupt controller node Documentation: dt: OMAP: Update Overo/Tobi ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi ARM: dts: omap3-tobi: Use the correct vendor prefix ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo ARM: OMAP2+: Remove legacy macros for zoom platforms ARM: OMAP2+: Remove MACH_NOKIA_N800 ARM: dts: N900: add missing compatible property ARM: dts: N9/N950: fix boot hang with 3.14-rc1 ARM: OMAP1: nokia770: enable tahvo-usb ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module ARM: dts: omap3-gta04: Fix mmc1 properties. ARM: dts: omap3-gta04: Fix 'aux' gpio key flags. ARM: OMAP2+: add missing ARCH_HAS_OPP ...
2014-02-24Merge tag 'regulator-v3.14-rc4' of ↵Linus Torvalds4-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Mostly unexciting driver fixes, plus one fix to lower the severity of the log message when we don't use an optional regulator - the fixes for ACPI system made this come up more often and it was correctly observed that it was causing undue concern for users" * tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: max14577: Fix invalid return value on DT parse success regulator: core: Change dummy supplies error message to a warning regulator: s5m8767: Add missing of_node_put regulator: s5m8767: Use of_get_child_by_name regulator: da9063: Bug fix when setting max voltage on LDOs 5-11
2014-02-24Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-17/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "Serialize the registration of a new sched_clock in the currently ARM only generic sched_clock facilty to avoid sched_clock havoc" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched_clock: Prevent callers from seeing half-updated data
2014-02-24Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-21/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - a bugfix which prevents a divide by 0 panic when the newly introduced try_msr_calibrate_tsc() fails - enablement of the Baytrail platform to utilize the newfangled msr based calibration * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: tsc: Add missing Baytrail frequency to the table x86, tsc: Fallback to normal calibration if fast MSR calibration fails
2014-02-24Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-3/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Another four fixlets to tame the ARM orion irq chip" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: orion: Fix getting generic chip pointer. irqchip: orion: clear stale interrupts in irq_startup irqchip: orion: use handle_edge_irq on bridge irqs irqchip: orion: clear bridge cause register on init
2014-02-23Merge tag 'usb-3.14-rc4' of ↵Linus Torvalds19-111/+159
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB fixes for reported issues for 3.14-rc4 The majority of these are for USB gadget, phy, and musb driver issues. And there's a few new device ids thrown in for good measure" * tag 'usb-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: need to mask when writting endptflush and endptprime usb: musb: correct use of schedule_delayed_work() usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP usb: gadget: fix NULL pointer dereference usb: gadget: printer: using gadget_is_otg to check otg support at runtime phy: let phy_provider_register be the last step in registering PHY phy-core: Don't allow building phy-core as a module phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller phy-core: phy_get: Leave error logging to the caller phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM usb: musb: correct use of schedule_delayed_work() usb: musb: do not sleep in atomic context USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8 USB: EHCI: add delay during suspend to prevent erroneous wakeups usb: gadget: bcm63xx_udc: fix build failure on DMA channel code usb: musb: do not sleep in atomic context usb: gadget: s3c2410_udc: Fix build error usb: musb: core: Fix remote-wakeup resume usb: musb: host: Fix SuperSpeed hub enumeration usb: musb: fix obex in g_nokia.ko causing kernel panic
2014-02-23Merge tag 'tty-3.14-rc4' of ↵Linus Torvalds2-20/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY revert from Greg KH: "Here is a single commit, a revert of a sysfs file change that ended up breaking a userspace tool" * tag 'tty-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: Set correct tty name in 'active' sysfs attribute"
2014-02-23Merge tag 'staging-3.14-rc4' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree fix from Greg KH: "Here is a single android driver fix for 3.14-rc4 that fixes a reported problem in the binder driver" * tag 'staging-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: binder: Fix death notifications
2014-02-23Merge tag 'char-misc-3.14-rc4' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is a single commit, to fix a reported problem in the mei driver" * tag 'char-misc-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: set client's read_cb to NULL when flow control fails
2014-02-23MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainerMatt Porter1-0/+1
Add myself as an additional maintainer for the Broadcom mobile SoCs. Signed-off-by: Matt Porter <mporter@linaro.org> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-23Merge remote-tracking branches 'regulator/fix/da9063', ↵Mark Brown3-4/+9
'regulator/fix/max14577' and 'regulator/fix/s5m8767' into regulator-linus
2014-02-23Merge remote-tracking branch 'regulator/fix/core' into regulator-linusMark Brown1-1/+1
2014-02-23Revert "tty: Set correct tty name in 'active' sysfs attribute"Greg Kroah-Hartman2-20/+8
This reverts commit d8a5dc3033af2fd6d16030d2ee4fbd073460fe54. This breaks plymouth installs, either because plymouth is using the file "incorrectly" or because the patch is incorrect. Either way, this needs to be reverted until it is all figured out. Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Reported-by: Ray Strode <halfline@gmail.com> Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Werner Fink <werner@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-23Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds6-25/+28
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixlets: a fair number of them resulting from the new SCHED_DEADLINE code" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Remove useless dl_nr_total sched/deadline: Test for CPU's presence explicitly sched: Add 'flags' argument to sched_{set,get}attr() syscalls sched: Fix information leak in sys_sched_getattr() sched,numa: add cond_resched to task_numa_work sched/core: Make dl_b->lock IRQ safe sched/core: Fix sched_rt_global_validate sched/deadline: Fix overflow to handle period==0 and deadline!=0 sched/deadline: Fix bad accounting of nr_running
2014-02-23Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds9-29/+96
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixlets from all around the place" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter table perf/x86: Correctly use FEATURE_PDCM perf, nmi: Fix unknown NMI warning perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || x86_64) arches perf trace: Add fallback definition of EFD_SEMAPHORE perf list: Fix checking for supported events on older kernels perf tools: Handle PERF_RECORD_HEADER_EVENT_TYPE properly perf probe: Do not add offset twice to uprobe address perf/x86: Fix Userspace RDPMC switch perf/x86/intel/p6: Add userspace RDPMC quirk for PPro
2014-02-22Merge tag 'hwmon-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix writing the minimum temperature in max1668 driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max1668) Fix writing the minimum temperature
2014-02-22Merge branch 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfsLinus Torvalds5-27/+43
Pull xfs fixes from Dave Chinner: "This is the first pull request I've had to do for you, so I'm still sorting things out. The reason I'm sending this and not Ben should be obvious from the first commit below - SGI has stepped down from the XFS maintainership role. As such, I'd like to take another opportunity to thank them for their many years of effort maintaining XFS and supporting the XFS community that they developed from the ground up. So I haven't had time to work things like signed tags into my workflows yet, so this is just a repo branch I'm asking you to pull from. And yes, I named the branch -rc4 because I wanted the fixes in rc4, not because the branch was for merging into -rc3. Probably not right, either. Anyway, I should have everything sorted out by the time the next merge window comes around. If there's anything that you don't like in the pull req, feel free to flame me unmercifully. The changes are fixes for recent regressions and important thinkos in verification code: - a log vector buffer alignment issue on ia32 - timestamps on truncate got mangled - primary superblock CRC validation fixes and error message sanitisation" * 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfs: xfs: limit superblock corruption errors to actual corruption xfs: skip verification on initial "guess" superblock read MAINTAINERS: SGI no longer maintaining XFS xfs: xfs_sb_read_verify() doesn't flag bad crcs on primary sb xfs: ensure correct log item buffer alignment xfs: ensure correct timestamp updates from truncate
2014-02-22Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar4-3/+44
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: * Handle PERF_RECORD_HEADER_EVENT_TYPE properly. (Jiri Olsa) * Fix checking for supported events on older kernels in 'perf list' (Vince Weaver) * Do not add offset twice to uprobe address in 'perf probe' (Masami Hiramatsu) * Fix perf trace's ioctl 'request' beautifier build problems on !(i386 || x86_64) arches (Arnaldo Carvalho de Melo) * Fix 'perf trace' build by adding a fallback definition for EFD_SEMAPHORE (Ben Hutchings) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-22regulator: max14577: Fix invalid return value on DT parse successKrzysztof Kozlowski1-2/+3
This fixes bug introduced in 667a6b7a (regulator: max14577: Add missing of_node_put). The DTS parsing function returned number of matched regulators as success status which then was compared against 0 in probe. Result was a probe fail after successful parsing the DTS: max14577-regulator: probe of max14577-regulator failed with error 2 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviwed-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-22Merge tag 'irqchip-mvebu-fixes-3.14' of git://git.infradead.org/linux-mvebu ↵Thomas Gleixner1-3/+19
into irq/urgent irqchip mvebu fixes for v3.14 - orion: - fixes for clearing bridge cause register, and clearing stale interrupts Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-22Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds9-80/+166
Pull devicetree fixes from Grant Likely: "Device tree compatible match order bug fix This branch contains a bug fix for the way devicetree code identifies the type of device. Device drivers can contain a list of of_device_ids, but it more than one entry will match, then the device driver may choose the wrong one. Commit 105353145e, "match each node compatible against all given matches first", was queued for v3.14 but ended up causing other bugs. Commit 06b29e76a7 attempted to fix it but it had other bugs. Merely reverting the fix and waiting until v3.15 isn't a good option because there is code in v3.14 that depends on the revised behaviour to boot. This branch should finally fixes the problem correctly. This time instead of just hoping that the patch is correct, this branch also adds new testcases that validate the behaviour. The changes in this branch are larger than I would like for a -rc pull, but moving the test case data out of out of arch/arm so that it could be validated on other architectures was important" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: of: Add self test for of_match_node() of: Move testcase FDT data into drivers/of of: reimplement the matching method for __of_match_node() Revert "of: search the best compatible match first in __of_match_node()"
2014-02-22Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds1-1/+1
Pull watchdog fix from Wim Van Sebroeck: "It corrects the error code when no device was found for w83697hf_wdt" * git://www.linux-watchdog.org/linux-watchdog: watchdog: w83697hf_wdt: return ENODEV if no device was found
2014-02-22irqchip: orion: Fix getting generic chip pointer.Andrew Lunn1-1/+2
Enabling SPARSE_IRQ shows up a bug in the irq-orion bridge interrupt handler. The bridge interrupt is implemented using a single generic chip. Thus the parameter passed to irq_get_domain_generic_chip() should always be zero. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Fixes: 9dbd90f17e4f ("irqchip: Add support for Marvell Orion SoCs") Cc: <stable@vger.kernel.org> # v3.11+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-22perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter tableStephane Eranian1-1/+9
This patch updates the CBOX PMU filters mapping tables for SNB-EP and IVT (model 45 and 62 respectively). The NID umask always comes in addition to another umask. When set, the NID filter is applied. The current mapping tables were missing some code/umask combinations to account for the NID umask. This patch fixes that. Cc: mingo@elte.hu Cc: ak@linux.intel.com Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140219131018.GA24475@quad Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-22perf/x86: Correctly use FEATURE_PDCMPeter Zijlstra1-4/+1
The current code simply assumes Intel Arch PerfMon v2+ to have the IA32_PERF_CAPABILITIES MSR; the SDM specifies that we should check CPUID[1].ECX[15] (aka, FEATURE_PDCM) instead. This was found by KVM which implements v2+ but didn't provide the capabilities MSR. Change the code to DTRT; KVM will also implement the MSR and return 0. Cc: pbonzini@redhat.com Reported-by: "Michael S. Tsirkin" <mst@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140203132903.GI8874@twins.programming.kicks-ass.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-22perf, nmi: Fix unknown NMI warningMarkus Metzger1-4/+2
When using BTS on Core i7-4*, I get the below kernel warning. $ perf record -c 1 -e branches:u ls Message from syslogd@labpc1501 at Nov 11 15:49:25 ... kernel:[ 438.317893] Uhhuh. NMI received for unknown reason 31 on CPU 2. Message from syslogd@labpc1501 at Nov 11 15:49:25 ... kernel:[ 438.317920] Do you have a strange power saving mode enabled? Message from syslogd@labpc1501 at Nov 11 15:49:25 ... kernel:[ 438.317945] Dazed and confused, but trying to continue Make intel_pmu_handle_irq() take the full exit path when returning early. Cc: eranian@google.com Cc: peterz@infradead.org Cc: mingo@kernel.org Signed-off-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392425048-5309-1-git-send-email-andi@firstfloor.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-22usb: chipidea: need to mask when writting endptflush and endptprimeMatthieu CASTET1-2/+2
ENDPTFLUSH and ENDPTPRIME registers are set by software and clear by hardware. There is a bit for each endpoint. When we are setting a bit for an endpoint we should make sure we do not touch other endpoint bit. There is a race condition if the hardware clear the bit between the read and the write in hw_write. Cc: stable <stable@vger.kernel.org> # 3.11+ Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Tested-by: Michael Grzeschik <mgrzeschik@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22staging: binder: Fix death notificationsArve Hjønnevåg1-2/+1
The change (008fa749e0fe5b2fffd20b7fe4891bb80d072c6a) that moved the node release code to a separate function broke death notifications in some cases. When it encountered a reference without a death notification request, it would skip looking at the remaining references, and therefore fail to send death notifications for them. Cc: Colin Cross <ccross@android.com> Cc: Android Kernel Team <kernel-team@android.com> Cc: stable <stable@vger.kernel.org> # 3.10 Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22sched/deadline: Remove useless dl_nr_totalKirill Tkhai2-4/+1
In deadline class we do not have group scheduling like in RT. dl_nr_total is the same as dl_nr_running. So, one of them should be removed. Cc: Ingo Molnar <mingo@redhat.com> Cc: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/368631392675853@web20h.yandex.ru Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-22sched/deadline: Test for CPU's presence explicitlyBoris Ostrovsky1-3/+3
A hot-removed CPU may have ID that is numerically larger than the number of existing CPUs in the system (e.g. we can unplug CPU 4 from a system that has CPUs 0, 1 and 4). Thus the WARN_ONs should check whether the CPU in question is currently present, not whether its ID value is less than num_present_cpus(). Cc: Ingo Molnar <mingo@kernel.org> Cc: Juri Lelli <juri.lelli@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392646353-1874-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-22sched: Add 'flags' argument to sched_{set,get}attr() syscallsPeter Zijlstra2-7/+10
Because of a recent syscall design debate; its deemed appropriate for each syscall to have a flags argument for future extension; without immediately requiring new syscalls. Cc: juri.lelli@gmail.com Cc: Ingo Molnar <mingo@redhat.com> Suggested-by: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140214161929.GL27965@twins.programming.kicks-ass.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-22sched: Fix information leak in sys_sched_getattr()Vegard Nossum1-1/+1
We're copying the on-stack structure to userspace, but forgot to give the right number of bytes to copy. This allows the calling process to obtain up to PAGE_SIZE bytes from the stack (and possibly adjacent kernel memory). This fix copies only as much as we actually have on the stack (attr->size defaults to the size of the struct) and leaves the rest of the userspace-provided buffer untouched. Found using kmemcheck + trinity. Fixes: d50dde5a10f30 ("sched: Add new scheduler syscalls to support an extended scheduling parameters ABI") Cc: Dario Faggioli <raistlin@linux.it> Cc: Juri Lelli <juri.lelli@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392585857-10725-1-git-send-email-vegard.nossum@oracle.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-22sched,numa: add cond_resched to task_numa_workRik van Riel1-0/+2
Normally task_numa_work scans over a fairly small amount of memory, but it is possible to run into a large unpopulated part of virtual memory, with no pages mapped. In that case, task_numa_work can run for a while, and it may make sense to reschedule as required. Cc: akpm@linux-foundation.org Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Rik van Riel <riel@redhat.com> Reported-by: Xing Gang <gang.xing@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392761566-24834-2-git-send-email-riel@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-22sched/core: Make dl_b->lock IRQ safeJuri Lelli1-4/+6
Fix this lockdep warning: [ 44.804600] ========================================================= [ 44.805746] [ INFO: possible irq lock inversion dependency detected ] [ 44.805746] 3.14.0-rc2-test+ #14 Not tainted [ 44.805746] --------------------------------------------------------- [ 44.805746] bash/3674 just changed the state of lock: [ 44.805746] (&dl_b->lock){+.....}, at: [<ffffffff8106ad15>] sched_rt_handler+0x132/0x248 [ 44.805746] but this lock was taken by another, HARDIRQ-safe lock in the past: [ 44.805746] (&rq->lock){-.-.-.} and interrupts could create inverse lock ordering between them. [ 44.805746] [ 44.805746] other info that might help us debug this: [ 44.805746] Possible interrupt unsafe locking scenario: [ 44.805746] [ 44.805746] CPU0 CPU1 [ 44.805746] ---- ---- [ 44.805746] lock(&dl_b->lock); [ 44.805746] local_irq_disable(); [ 44.805746] lock(&rq->lock); [ 44.805746] lock(&dl_b->lock); [ 44.805746] <Interrupt> [ 44.805746] lock(&rq->lock); by making dl_b->lock acquiring always IRQ safe. Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392107067-19907-3-git-send-email-juri.lelli@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-22sched/core: Fix sched_rt_global_validateJuri Lelli1-1/+2
Don't compare sysctl_sched_rt_runtime against sysctl_sched_rt_period if the former is equal to RUNTIME_INF, otherwise disabling -rt bandwidth management (with CONFIG_RT_GROUP_SCHED=n) fails. Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392107067-19907-2-git-send-email-juri.lelli@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>