summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-12-17ARM: dts: omap: replace legacy *,wakeup property with wakeup-sourceSudeep Holla22-57/+57
Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "linux,wakeup" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source propertySudeep Holla3-6/+6
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17ARM: DTS: am437x: Use the new DT bindings for the eDMA3Peter Ujfalusi2-27/+62
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3 and enable the DMA even crossbar with ti,am335x-edma-crossbar. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17ARM: DTS: am33xx: Use the new DT bindings for the eDMA3Peter Ujfalusi3-43/+71
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3 and enable the DMA even crossbar with ti,am335x-edma-crossbar. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17Merge commit 'ae0add740cd06169cd124f9aaa6eceb11e5b3060' into omap-for-v4.5/dtTony Lindgren3-25/+40
2015-12-10dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit typePeter Ujfalusi2-9/+27
This change makes the DT file to be easier to read since the reserved slots array does not need the '/bits/ 16' to be specified, which might confuse some people. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-10dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit typePeter Ujfalusi3-16/+13
This change makes the DT file to be easier to read since the memcpy channels array does not need the '/bits/ 16' to be specified, which might confuse some people. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-08ARM: dts: omap3-igep0030: Use MMC pwrseq to init SDIO WiFiJavier Martinez Canillas1-16/+8
When the WiFi support was added to the IGEP0030 board, the MMC subsystem did not provide a mechanism to define power sequence providers. So a DT hack was used to toggle the WiFi chip reset and power down pins by using fake fixed regulators whose enable GPIO was the GPIOs connected to these pins. But now the simple MMC power sequence provider can be used for this and the workaround removed. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-08ARM: dts: omap3-igep0020: Use MMC pwrseq to init SDIO WiFiJavier Martinez Canillas1-16/+8
When the WiFi support was added to the IGEP0020 board, the MMC subsystem did not provide a mechanism to define power sequence providers. So a DT hack was used to toggle the WiFi chip reset and power down pins by using fake fixed regulators whose enable GPIO was the GPIOs connected to these pins. But now the simple MMC power sequence provider can be used for this and the workaround removed. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: cl-som-am57x: skip resetting ETH PHYsDmitry Lifshitz1-0/+10
ETH PHYs setup on CL-SOM-AM57X is established in U-Boot along with bringing them out of reset. This is done by toggling GPIOs belonging to GPIO2/3 controllers on AM57xx. Skip resetting ETH PHYs, by adding "ti,no-reset-on-init" to GPIO2/3 controllers DT nodes. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: sbc-am57x: add HDMI supportDmitry Lifshitz1-0/+42
Add HDMI video output support. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: compulab-sb-som: add HDMI connectorDmitry Lifshitz1-0/+7
Add HDMI connector node without a valid input endpoint. CompuLab SB-SOM is a carrier board, hence the endpoint should be added in the board DT with a valid HDMI output. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: sbc-am57x: add LCD supportDmitry Lifshitz1-0/+38
Startek-kd050c 800x480 LCD panel timings are described in compulab-sb-som.dtsi. Add appropriate DT endpoints to connect DPI output and LCD. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: sbc-am57x: add GPIO expander supportDmitry Lifshitz1-0/+7
Add PCA9555 GPIO expander support (over I2C5 bus). Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: sbc-am57x: add EEPROM supportDmitry Lifshitz1-0/+20
On-board EEPROM chip is used for storing a board production info. Add carrier board EEPROM support (over I2C5 bus). Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: sbc-am57x: add usb vbus pinmuxDmitry Lifshitz1-0/+11
usb1_drvvbus pin is used to Drive-VBUS enable to external charge pump/power switch. Add a pinmux for that pin. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: cl-som-am57x: add MMC1 supportDmitry Lifshitz1-0/+25
Add MMC1 support, used for SD/MMC card. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: sbc-am57x: add basic board supportDmitry Lifshitz3-0/+40
SBC-AM57x is a single board computer designed for industrial and embedded applications. It is based on the Texas Instruments Sitara AM57x system-on-chip family. SBC-AM57x is implemented with the CL-SOM-AM57x computer-on-module providing most of the functions, and SB-SOM-AM57x carrier board providing additional peripheral functions and connectors. https://www.compulab.co.il/products/sbcs/sbc-am57x-ti-am5728-am5718-single-board-computer/ https://www.compulab.co.il/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/ Add basic board support, including UART3, used as a serial console. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: cl-som-am57x: add analog audio supportDmitry Lifshitz1-0/+67
Add analog audio DT nodes: 1. simple-audio-card node 2. wm8731 codec node 3. MCASP3 pinmux Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: cl-som-am57x: add touchscreen supportDmitry Lifshitz1-0/+44
Add ADS7846 touchscreen support. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: cl-som-am57x: add USB supportDmitry Lifshitz1-0/+16
Add USB support. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: cl-som-am57x: add dual EMAC supportDmitry Lifshitz1-0/+105
Add dual EMAC support. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: cl-som-am57x: add spi-flash supportDmitry Lifshitz1-0/+42
On-board spi-flash chip is used as a main boot device. Add spi-flash chip support (over QSPI bus). Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: cl-som-am57x: add eMMC supportDmitry Lifshitz1-0/+34
CM-SOM-AM57X has two options of main storage devices - eMMC or NAND. Add eMMC chip support (over MMC2 bus). Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: cl-som-am57x: add EEPROM supportDmitry Lifshitz1-0/+6
On-board EEPROM chip is used for storing a board production info. Add module EEPROM support (over I2C4 bus). Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: cl-som-am57x: add I2C3 supportDmitry Lifshitz1-0/+14
Enable I2C3 bus and add appropriate pinmux. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: cl-som-am57x: dts: add RTC supportDmitry Lifshitz1-0/+5
Add EM3027 RTC chip support (over I2C4 bus). Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am57xx: cl-som-am57x: add basic module supportDmitry Lifshitz3-1/+279
Add support for CompuLab CM-SOM-AM57X board. CL-SOM-AM57x is a miniature System-on-Module (SoM) based on TI Sitara AM57x ARM Cortex-A15 System-on-Chip family. https://www.compulab.co.il/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/ Add basic DT support for standalone module (without a carrier board): * Memory configuration * Heartbeat led * I2C1 and I2C4 * PMIC * SATA Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add lcd supportNikita Kiryanov1-0/+65
Add the necessary dss configuration to drive the startek lcd on CompuLab sbc-t43 single board computer. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add support for mmc1Nikita Kiryanov1-0/+24
On SBC-T43 the mmc1 interface is connected to an SD-Card slot. Add the necessary muxing and configuration to the device tree. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: sb-som: introduce SB-SOM baseboardNikita Kiryanov4-0/+52
CompuLab SB-SOM baseboard is a carrier board for multiple arm-based SoMs. It currently supports (with minor adjustments to assembly) CM-T43, CM-T54, and CM-QS600 modules. It is a building block in the SBC-T43 single board computer, which consists of cm-t43 on top of sb-som-t43. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add support for baseboard eepromNikita Kiryanov1-0/+6
SB-SOM baseboard comes with an on-board EEPROM. On SBC-T43 this EEPROM resides on the i2c1 bus. Add it to the device tree. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add pca9555 supportNikita Kiryanov1-0/+7
SB-SOM comes with a PCA9555 GPIO extender. On SBC-T43 this resides on the i2c1 bus. Add it to the device tree. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add touchscreen supportNikita Kiryanov1-0/+14
AM437x has an internal touchscreen controller. Add support for it on cm-t43. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add eMMC supportNikita Kiryanov1-0/+33
One of the CompuLab cm-t43 configurations comes with on-board eMMC as primary storage, residing on the mmc2 interface. Add it to the device tree. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add USB supportNikita Kiryanov2-0/+52
Add USB support for CompuLab sbc-t43 single board computer, defaulting to host mode. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add dual emac supportNikita Kiryanov1-0/+66
CM-T43 comes with 2 ethernet ports connected to the cpsw subsystem, which has 2 modes of operation: switch mode and dual emac mode. Add the relevant muxing and set it up to work in dual emac mode by default. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add NAND supportNikita Kiryanov1-0/+79
One of the CompuLab cm-t43 configurations comes with on-board NAND flash as primary storage. It is partitioned into kernel, dtb, and rootfs partitions. Add it to the device tree. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add spi-flash supportNikita Kiryanov1-0/+40
CM-T43 has an on-board 2MB SPI-flash which stores U-Boot and the U-Boot environment. Add it to the device tree. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add PMIC support.Nikita Kiryanov1-0/+64
Add PMIC support for CompuLab cm-t43 module. For now we keep all regulators enabled until this could be refined with power management support. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add support for module eepromNikita Kiryanov1-0/+6
CM-T43 has an on-board EEPROM on i2c bus 0. Add it to the device tree. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03ARM: dts: am437x: cm-t43: add basic support for sbc-t43Nikita Kiryanov4-2/+156
Add basic support for SBC-T43: a CM-T43 based single board computer. CM-T43 is an AM437x based System-on-Module designed to serve as a building block in embedded applications. SBC-T43 is composed of CM-T43 module on top of the SB-SOM-T43 baseboard. Basic support includes UART, GPIO, and I2C. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Rob Herring <robh@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-01ARM: dts: dra72-evm: Mark uart1 rxd as wakeup capableVignesh R1-0/+2
Uart1 rxd is wakeup capable on DRA72 EVM. Hence, mark rxd line as wakeup capable. This is similar to commit 66b0436977e2c ("ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable") for DRA74 EVM. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-01ARM: dts: am4372: add spi alias for qspiMugunthan V N1-0/+1
Set the alias for qspi to spi0 Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-01ARM: dts: dra7: add spi alias for qspiMugunthan V N1-0/+1
Set the alias for qspi to spi0 Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-01arm, am335x: add support for the bosch shc boardHeiko Schocher2-0/+578
add support for the am335x based shc board. UART: 0-2 and 4 DRAM: 512 MiB MMC: OMAP SD/MMC: 0 @ 26 MHz OMAP SD/MMC: 1 @ 26 MHz I2C: at24 eeprom, pcf8563 USB: USB1 (host) Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-01ARM: dts: omap4: Add elm nodeFranklin S Cooper Jr1-0/+8
Add device tree entry for the error location module. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-01regulator: tps65217: remove tps65217.dtsi fileHeiko Schocher7-67/+68
remove tps65217.dtsi and adapt all boards, which used it. Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Keerthy <j-keerthy@ti.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-01ARM: dts: cm-t335: add support for PWM backlightIlya Ledvich1-0/+24
Add pinmux configuration for ECAP0 pin. Add node for PWM backlight device. Use PWM output from ecap0 as backlight source. Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-01ARM: dts: cm-t335: add support for network deviceIlya Ledvich1-0/+85
Add pinmux configurations for RGMII1 based CPSW Ethernet pins and MDIO pins: - default configuration required for module in active state, - sleep configuration required for module in inactive state. Add mac node with single slave device. Add nodes for davinci_mdio and cpsw_emac0. Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-16 09:20:44 +0300