summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-08-03cpufreq: intel_pstate: Drop ACPI _PSS states table patchingRafael J. Wysocki1-14/+0
commit e8a0e30b742f76ebd0f3b196973df4bf65d8fbbb upstream. After making acpi_processor_get_platform_limit() use the "no limit" value for its frequency QoS request when _PPC returns 0, it is not necessary to replace the frequency corresponding to the first _PSS return package entry with the maximum turbo frequency of the given CPU in intel_pstate_init_acpi_perf_limits() any more, so drop the code doing that along with the comment explaining it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Hagar Hemdan <hagarhem@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03ACPI: processor: perflib: Avoid updating frequency QoS unnecessarilyRafael J. Wysocki1-4/+14
commit 99387b016022c29234c4ebf9abd34358c6e56532 upstream. Modify acpi_processor_get_platform_limit() to avoid updating its frequency QoS request when the _PPC return value has not changed by comparing that value to the previous _PPC return value stored in the performance_platform_limit field of the struct acpi_processor corresponding to the given CPU. While at it, do the _PPC return value check against the state count earlier, to avoid setting performance_platform_limit to an invalid value, and make acpi_processor_ppc_init() use FREQ_QOS_MAX_DEFAULT_VALUE as the "no limit" frequency QoS for consistency. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Hagar Hemdan <hagarhem@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03ACPI: processor: perflib: Use the "no limit" frequency QoSRafael J. Wysocki1-4/+16
commit c02d5feb6e2f60affc6ba8606d8d614c071e2ba6 upstream. When _PPC returns 0, it means that the CPU frequency is not limited by the platform firmware, so make acpi_processor_get_platform_limit() update the frequency QoS request used by it to "no limit" in that case. This addresses a problem with limiting CPU frequency artificially on some systems after CPU offline/online to the frequency that corresponds to the first entry in the _PSS return package. Reported-by: Pratyush Yadav <ptyadav@amazon.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Pratyush Yadav <ptyadav@amazon.de> Tested-by: Pratyush Yadav <ptyadav@amazon.de> Tested-by: Hagar Hemdan <hagarhem@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03drm/amd/display: Write to correct dirty_rectBenjamin Cheng1-3/+3
commit 751281c55579f0cb0e56c9797d4663f689909681 upstream. When FB_DAMAGE_CLIPS are provided in a non-MPO scenario, the loop does not use the counter i. This causes the fill_dc_dity_rect() to always fill dirty_rects[0], causing graphical artifacts when a damage clip aware DRM client sends more than 1 damage clip. Instead, use the flip_addrs->dirty_rect_count which is incremented by fill_dc_dirty_rect() on a successful fill. Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2453 Signed-off-by: Benjamin Cheng <ben@bcheng.me> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03drm/amd/display: perform a bounds check before filling dirty rectanglesHamza Mahfooz1-9/+4
commit af22d6a869cc26b519bfdcd54293c53f2e491870 upstream. Currently, it is possible for us to access memory that we shouldn't. Since, we acquire (possibly dangling) pointers to dirty rectangles before doing a bounds check to make sure we can actually accommodate the number of dirty rectangles userspace has requested to fill. This issue is especially evident if a compositor requests both MPO and damage clips at the same time, in which case I have observed a soft-hang. So, to avoid this issue, perform the bounds check before filling a single dirty rectangle and WARN() about it, if it is ever attempted in fill_dc_dirty_rect(). Cc: stable@vger.kernel.org # 6.1+ Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support") Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03tracing: Fix trace_event_raw_event_synth() if else statementSteven Rostedt (Google)1-2/+2
commit 9971c3f944489ff7aacb9d25e0cde841a5f6018a upstream. The test to check if the field is a stack is to be done if it is not a string. But the code had: } if (event->fields[i]->is_stack) { and not } else if (event->fields[i]->is_stack) { which would cause it to always be tested. Worse yet, this also included an "else" statement that was only to be called if the field was not a string and a stack, but this code allows it to be called if it was a string (and not a stack). Also fixed some whitespace issues. Link: https://lore.kernel.org/all/202301302110.mEtNwkBD-lkp@intel.com/ Link: https://lore.kernel.org/linux-trace-kernel/20230131095237.63e3ca8d@gandalf.local.home Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 00cf3d672a9d ("tracing: Allow synthetic events to pass around stacktraces") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03drm/amd/display: set per pipe dppclk to 0 when dpp is offDmytro Laktyushkin2-1/+7
commit 6609141c49df1b86fbad26a8643d4b4044f28b11 upstream. The 'commit 52e4fdf09ebc ("drm/amd/display: use low clocks for no plane configs")' introduced a change that set low clock values for DCN31 and DCN32. As a result of these changes, DC started to spam the log with the following warning: ------------[ cut here ]------------ WARNING: CPU: 8 PID: 1486 at drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dccg.c:58 dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu] [..] CPU: 8 PID: 1486 Comm: kms_atomic Tainted: G W 5.18.0+ #1 RIP: 0010:dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu] RSP: 0018:ffffbbd8025334d0 EFLAGS: 00010206 RAX: 00000000000001ee RBX: ffffa02c87dd3de0 RCX: 00000000000a7f80 RDX: 000000000007dec3 RSI: 0000000000000000 RDI: ffffa02c87dd3de0 RBP: ffffbbd8025334e8 R08: 0000000000000001 R09: 0000000000000005 R10: 00000000000331a0 R11: ffffffffc0b03d80 R12: ffffa02ca576d000 R13: ffffa02cd02c0000 R14: 00000000001453bc R15: ffffa02cdc280000 [..] dcn20_update_clocks_update_dpp_dto+0x4e/0xa0 [amdgpu] dcn32_update_clocks+0x5d9/0x650 [amdgpu] dcn20_prepare_bandwidth+0x49/0x100 [amdgpu] dcn30_prepare_bandwidth+0x63/0x80 [amdgpu] dc_commit_state_no_check+0x39d/0x13e0 [amdgpu] dc_commit_streams+0x1f9/0x3b0 [amdgpu] dc_commit_state+0x37/0x120 [amdgpu] amdgpu_dm_atomic_commit_tail+0x5e5/0x2520 [amdgpu] ? _raw_spin_unlock_irqrestore+0x1f/0x40 ? down_trylock+0x2c/0x40 ? vprintk_emit+0x186/0x2c0 ? vprintk_default+0x1d/0x20 ? vprintk+0x4e/0x60 We can easily trigger this issue by using a 4k@120 or a 2k@165 and running some of the kms_atomic tests. This warning is triggered because the per-pipe clock update is not happening; this commit fixes this issue by ensuring that DPPCLK is updated when calculating the watermark and dlg is invoked. Fixes: 2641c7b78081 ("drm/amd/display: use low clocks for no plane configs") Reported-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03rbd: retrieve and check lock owner twice before blocklistingIlya Dryomov1-2/+23
commit 588159009d5b7a09c3e5904cffddbe4a4e170301 upstream. An attempt to acquire exclusive lock can race with the current lock owner closing the image: 1. lock is held by client123, rbd_lock() returns -EBUSY 2. get_lock_owner_info() returns client123 instance details 3. client123 closes the image, lock is released 4. find_watcher() returns 0 as there is no matching watcher anymore 5. client123 instance gets erroneously blocklisted Particularly impacted is mirror snapshot scheduler in snapshot-based mirroring since it happens to open and close images a lot (images are opened only for as long as it takes to take the next mirror snapshot, the same client instance is used for all images). To reduce the potential for erroneous blocklisting, retrieve the lock owner again after find_watcher() returns 0. If it's still there, make sure it matches the previously detected lock owner. Cc: stable@vger.kernel.org # f38cb9d9c204: rbd: make get_lock_owner_info() return a single locker or NULL Cc: stable@vger.kernel.org # 8ff2c64c9765: rbd: harden get_lock_owner_info() a bit Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03rbd: harden get_lock_owner_info() a bitIlya Dryomov2-6/+16
commit 8ff2c64c9765446c3cef804fb99da04916603e27 upstream. - we want the exclusive lock type, so test for it directly - use sscanf() to actually parse the lock cookie and avoid admitting invalid handles - bail if locker has a blank address Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03rbd: make get_lock_owner_info() return a single locker or NULLIlya Dryomov1-33/+51
commit f38cb9d9c2045dad16eead4a2e1aedfddd94603b upstream. Make the "num_lockers can be only 0 or 1" assumption explicit and simplify the API by getting rid of output parameters in preparation for calling get_lock_owner_info() twice before blocklisting. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03dm cache policy smq: ensure IO doesn't prevent cleaner policy progressJoe Thornber1-10/+18
commit 1e4ab7b4c881cf26c1c72b3f56519e03475486fb upstream. When using the cleaner policy to decommission the cache, there is never any writeback started from the cache as it is constantly delayed due to normal I/O keeping the device busy. Meaning @idle=false was always being passed to clean_target_met() Fix this by adding a specific 'cleaner' flag that is set when the cleaner policy is configured. This flag serves to always allow the cleaner's writeback work to be queued until the cache is decommissioned (even if the cache isn't idle). Reported-by: David Jeffery <djeffery@redhat.com> Fixes: b29d4986d0da ("dm cache: significant rework to leverage dm-bio-prison-v2") Cc: stable@vger.kernel.org Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03drm/i915/dpt: Use shmem for dpt objectsRadhakrishna Sripada1-1/+3
commit 3844ed5e78823eebb5f0f1edefc403310693d402 upstream. Dpt objects that are created from internal get evicted when there is memory pressure and do not get restored when pinned during scanout. The pinned page table entries look corrupted and programming the display engine with the incorrect pte's result in DE throwing pipe faults. Create DPT objects from shmem and mark the object as dirty when pinning so that the object is restored when shrinker evicts an unpinned buffer object. v2: Unconditionally mark the dpt objects dirty during pinning(Chris). Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt") Cc: <stable@vger.kernel.org> # v6.0+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Suggested-by: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by: Fei Yang <fei.yang@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230718225118.2562132-1-radhakrishna.sripada@intel.com (cherry picked from commit e91a777a6e602ba0e3366e053e4e094a334a1244) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03ceph: never send metrics if disable_send_metrics is setXiubo Li1-1/+1
commit 50164507f6b7b7ed85d8c3ac0266849fbd908db7 upstream. Even the 'disable_send_metrics' is true so when the session is being opened it will always trigger to send the metric for the first time. Cc: stable@vger.kernel.org Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03PM: sleep: wakeirq: fix wake irq armingJohan Hovold2-4/+9
commit 8527beb12087238d4387607597b4020bc393c4b4 upstream. The decision whether to enable a wake irq during suspend can not be done based on the runtime PM state directly as a driver may use wake irqs without implementing runtime PM. Such drivers specifically leave the state set to the default 'suspended' and the wake irq is thus never enabled at suspend. Add a new wake irq flag to track whether a dedicated wake irq has been enabled at runtime suspend and therefore must not be enabled at system suspend. Note that pm_runtime_enabled() can not be used as runtime PM is always disabled during late suspend. Fixes: 69728051f5bf ("PM / wakeirq: Fix unbalanced IRQ enable for wakeirq") Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03arm64/sme: Set new vector length before reallocatingMark Brown1-2/+2
commit 05d881b85b48c7ac6a7c92ce00aa916c4a84d052 upstream. As part of fixing the allocation of the buffer for SVE state when changing SME vector length we introduced an immediate reallocation of the SVE state, this is also done when changing the SVE vector length for consistency. Unfortunately this reallocation is done prior to writing the new vector length to the task struct, meaning the allocation is done with the old vector length and can lead to memory corruption due to an undersized buffer being used. Move the update of the vector length before the allocation to ensure that the new vector length is taken into account. For some reason this isn't triggering any problems when running tests on the arm64 fixes branch (even after repeated tries) but is triggering issues very often after merge into mainline. Fixes: d4d5be94a878 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230726-arm64-fix-sme-fix-v1-1-7752ec58af27@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03ASoC: wm8904: Fill the cache for WM8904_ADC_TEST_0 registerMark Brown1-0/+3
commit f061e2be8689057cb4ec0dbffa9f03e1a23cdcb2 upstream. The WM8904_ADC_TEST_0 register is modified as part of updating the OSR controls but does not have a cache default, leading to errors when we try to modify these controls in cache only mode with no prior read: wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16 Add a read of the register to probe() to fill the cache and avoid both the error messages and the misconfiguration of the chip which will result. Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03s390/dasd: print copy pair message only for the correct errorStefan Haberland1-1/+1
commit 856d8e3c633b183df23549ce760ae84478a7098d upstream. The DASD driver has certain types of requests that might be rejected by the storage server or z/VM because they are not supported. Since the missing support of the command is not a real issue there is no user visible kernel error message for this. For copy pair setups there is a specific error that IO is not allowed on secondary devices. This error case is explicitly handled and an error message is printed. The code checking for the error did use a bitwise 'and' that is used to check for specific bits. But in this case the whole sense byte has to match. This leads to the problem that the copy pair related error message is erroneously printed for other error cases that are usually not reported. This might heavily confuse users and lead to follow on actions that might disrupt application processing. Fix by checking the sense byte for the exact value and not single bits. Cc: stable@vger.kernel.org # 6.1+ Fixes: 1fca631a1185 ("s390/dasd: suppress generic error messages for PPRC secondary devices") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230721193647.3889634-5-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03s390/dasd: fix hanging device after quiesce/resumeStefan Haberland1-0/+1
commit 05f1d8ed03f547054efbc4d29bb7991c958ede95 upstream. Quiesce and resume are functions that tell the DASD driver to stop/resume issuing I/Os to a specific DASD. On resume dasd_schedule_block_bh() is called to kick handling of IO requests again. This does unfortunately not cover internal requests which are used for path verification for example. This could lead to a hanging device when a path event or anything else that triggers internal requests occurs on a quiesced device. Fix by also calling dasd_schedule_device_bh() which triggers handling of internal requests on resume. Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230721193647.3889634-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03LoongArch: BPF: Enable bpf_probe_read{, str}() on LoongArchChenguang Zhao1-0/+1
commit de0e30bee86d0f99c696a1fea34474e556a946ec upstream. Currently nettrace does not work on LoongArch due to missing bpf_probe_read{,str}() support, with the error message: ERROR: failed to load kprobe-based eBPF ERROR: failed to load kprobe-based bpf According to commit 0ebeea8ca8a4d1d ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work"), we only need to select CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to add said support, because LoongArch does have non-overlapping address ranges for kernel and userspace. Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03LoongArch: BPF: Fix check condition to call lu32id in move_imm()Tiezhu Yang1-1/+1
commit 4eece7e6de94d833c8aeed2f438faf487cbf94ff upstream. As the code comment says, the initial aim is to reduce one instruction in some corner cases, if bit[51:31] is all 0 or all 1, no need to call lu32id. That is to say, it should call lu32id only if bit[51:31] is not all 0 and not all 1. The current code always call lu32id, the result is right but the logic is unexpected and wrong, fix it. Cc: stable@vger.kernel.org # 6.1 Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Reported-by: Colin King (gmail) <colin.i.king@gmail.com> Closes: https://lore.kernel.org/all/bcf97046-e336-712a-ac68-7fd194f2953e@gmail.com/ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03Revert "um: Use swap() to make code cleaner"Andy Shevchenko1-3/+4
commit dddfa05eb58076ad60f9a66e7155a5b3502b2dd5 upstream. This reverts commit 9b0da3f22307af693be80f5d3a89dc4c7f360a85. The sigio.c is clearly user space code which is handled by arch/um/scripts/Makefile.rules (see USER_OBJS rule). The above mentioned commit simply broke this agreement, we may not use Linux kernel internal headers in them without thorough thinking. Hence, revert the wrong commit. Link: https://lkml.kernel.org/r/20230724143131.30090-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202307212304.cH79zJp1-lkp@intel.com/ Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Herve Codina <herve.codina@bootlin.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Richard Weinberger <richard@nod.at> Cc: Yang Guang <yang.guang5@zte.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03soundwire: fix enumeration completionJohan Hovold1-4/+4
commit c40d6b3249b11d60e09d81530588f56233d9aa44 upstream. The soundwire subsystem uses two completion structures that allow drivers to wait for soundwire device to become enumerated on the bus and initialised by their drivers, respectively. The code implementing the signalling is currently broken as it does not signal all current and future waiters and also uses the wrong reinitialisation function, which can potentially lead to memory corruption if there are still waiters on the queue. Not signalling future waiters specifically breaks sound card probe deferrals as codec drivers can not tell that the soundwire device is already attached when being reprobed. Some codec runtime PM implementations suffer from similar problems as waiting for enumeration during resume can also timeout despite the device already having been enumerated. Fixes: fb9469e54fa7 ("soundwire: bus: fix race condition with enumeration_complete signaling") Fixes: a90def068127 ("soundwire: bus: fix race condition with initialization_complete signaling") Cc: stable@vger.kernel.org # 5.7 Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230705123018.30903-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03selftests: mptcp: join: only check for ip6tables if neededMatthieu Baerts1-3/+1
commit 016e7ba47f33064fbef8c4307a2485d2669dfd03 upstream. If 'iptables-legacy' is available, 'ip6tables-legacy' command will be used instead of 'ip6tables'. So no need to look if 'ip6tables' is available in this case. Cc: stable@vger.kernel.org Fixes: 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-1-6f60fe7137a9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03net: dsa: qca8k: fix mdb add/del case with 0 VIDChristian Marangi1-0/+6
commit dfd739f182b00b02bd7470ed94d112684cc04fa2 upstream. The qca8k switch doesn't support using 0 as VID and require a default VID to be always set. MDB add/del function doesn't currently handle this and are currently setting the default VID. Fix this by correctly handling this corner case and internally use the default VID for VID 0 case. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03net: dsa: qca8k: fix broken search_and_delChristian Marangi1-0/+4
commit ae70dcb9d9ecaf7d9836d3e1b5bef654d7ef5680 upstream. On deleting an MDB entry for a port, fdb_search_and_del is used. An FDB entry can't be modified so it needs to be deleted and readded again with the new portmap (and the port deleted as requested) We use the SEARCH operator to search the entry to edit by vid and mac address and then we check the aging if we actually found an entry. Currently the code suffer from a bug where the searched fdb entry is never read again with the found values (if found) resulting in the code always returning -EINVAL as aging was always 0. Fix this by correctly read the fdb entry after it was searched. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03net: dsa: qca8k: fix search_and_insert wrong handling of new ruleChristian Marangi1-3/+6
commit 80248d4160894d7e40b04111bdbaa4ff93fc4bd7 upstream. On inserting a mdb entry, fdb_search_and_insert is used to add a port to the qca8k target entry in the FDB db. A FDB entry can't be modified so it needs to be removed and insert again with the new values. To detect if an entry already exist, the SEARCH operation is used and we check the aging of the entry. If the entry is not 0, the entry exist and we proceed to delete it. Current code have 2 main problem: - The condition to check if the FDB entry exist is wrong and should be the opposite. - When a FDB entry doesn't exist, aging was never actually set to the STATIC value resulting in allocating an invalid entry. Fix both problem by adding aging support to the function, calling the function with STATIC as aging by default and finally by correct the condition to check if the entry actually exist. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03virtio-net: fix race between set queues and probeJason Wang1-2/+2
commit 25266128fe16d5632d43ada34c847d7b8daba539 upstream. A race were found where set_channels could be called after registering but before virtnet_set_queues() in virtnet_probe(). Fixing this by moving the virtnet_set_queues() before netdevice registering. While at it, use _virtnet_set_queues() to avoid holding rtnl as the device is not even registered at that time. Cc: stable@vger.kernel.org Fixes: a220871be66f ("virtio-net: correctly enable multiqueue") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230725072049.617289-1-jasowang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03xen: speed up grant-table reclaimDemi Marie Obenour2-11/+40
commit c04e9894846c663f3278a414f34416e6e45bbe68 upstream. When a grant entry is still in use by the remote domain, Linux must put it on a deferred list. Normally, this list is very short, because the PV network and block protocols expect the backend to unmap the grant first. However, Qubes OS's GUI protocol is subject to the constraints of the X Window System, and as such winds up with the frontend unmapping the window first. As a result, the list can grow very large, resulting in a massive memory leak and eventual VM freeze. To partially solve this problem, make the number of entries that the VM will attempt to free at each iteration tunable. The default is still 10, but it can be overridden via a module parameter. This is Cc: stable because (when combined with appropriate userspace changes) it fixes a severe performance and stability problem for Qubes OS users. Cc: stable@vger.kernel.org Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230726165354.1252-1-demi@invisiblethingslab.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03proc/vmcore: fix signedness bug in read_from_oldmem()Dan Carpenter1-1/+1
commit 641db40f3afe7998011bfabc726dba3e698f8196 upstream. The bug is the error handling: if (tmp < nr_bytes) { "tmp" can hold negative error codes but because "nr_bytes" is type size_t the negative error codes are treated as very high positive values (success). Fix this by changing "nr_bytes" to type ssize_t. The "nr_bytes" variable is used to store values between 1 and PAGE_SIZE and they can fit in ssize_t without any issue. Link: https://lkml.kernel.org/r/b55f7eed-1c65-4adc-95d1-6c7c65a54a6e@moroto.mountain Fixes: 5d8de293c224 ("vmcore: convert copy_oldmem_page() to take an iov_iter") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03locking/rtmutex: Fix task->pi_waiters integrityPeter Zijlstra4-76/+155
[ Upstream commit f7853c34241807bb97673a5e97719123be39a09e ] Henry reported that rt_mutex_adjust_prio_check() has an ordering problem and puts the lie to the comment in [7]. Sharing the sort key between lock->waiters and owner->pi_waiters *does* create problems, since unlike what the comment claims, holding [L] is insufficient. Notably, consider: A / \ M1 M2 | | B C That is, task A owns both M1 and M2, B and C block on them. In this case a concurrent chain walk (B & C) will modify their resp. sort keys in [7] while holding M1->wait_lock and M2->wait_lock. So holding [L] is meaningless, they're different Ls. This then gives rise to a race condition between [7] and [11], where the requeue of pi_waiters will observe an inconsistent tree order. B C (holds M1->wait_lock, (holds M2->wait_lock, holds B->pi_lock) holds A->pi_lock) [7] waiter_update_prio(); ... [8] raw_spin_unlock(B->pi_lock); ... [10] raw_spin_lock(A->pi_lock); [11] rt_mutex_enqueue_pi(); // observes inconsistent A->pi_waiters // tree order Fixing this means either extending the range of the owner lock from [10-13] to [6-13], with the immediate problem that this means [6-8] hold both blocked and owner locks, or duplicating the sort key. Since the locking in chain walk is horrible enough without having to consider pi_lock nesting rules, duplicate the sort key instead. By giving each tree their own sort key, the above race becomes harmless, if C sees B at the old location, then B will correct things (if they need correcting) when it walks up the chain and reaches A. Fixes: fb00aca47440 ("rtmutex: Turn the plist into an rb-tree") Reported-by: Henry Wu <triangletrap12@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Henry Wu <triangletrap12@gmail.com> Link: https://lkml.kernel.org/r/20230707161052.GF2883469%40hirez.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidationMarc Zyngier1-29/+46
[ Upstream commit 926846a703cbf5d0635cc06e67d34b228746554b ] We normally rely on the irq_to_cpuid_[un]lock() primitives to make sure nothing will change col->idx while performing a LPI invalidation. However, these primitives do not cover VPE doorbells, and we have some open-coded locking for that. Unfortunately, this locking is pretty bogus. Instead, extend the above primitives to cover VPE doorbells and convert the whole thing to it. Fixes: f3a059219bc7 ("irqchip/gic-v4.1: Ensure mutual exclusion between vPE affinity change and RD access") Reported-by: Kunkun Jiang <jiangkunkun@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Zenghui Yu <yuzenghui@huawei.com> Cc: wanghaibin.wang@huawei.com Tested-by: Kunkun Jiang <jiangkunkun@huawei.com> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20230617073242.3199746-1-maz@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03irq-bcm6345-l1: Do not assume a fixed block to cpu mappingJonas Gorski1-9/+5
[ Upstream commit 55ad24857341c36616ecc1d9580af5626c226cf1 ] The irq to block mapping is fixed, and interrupts from the first block will always be routed to the first parent IRQ. But the parent interrupts themselves can be routed to any available CPU. This is used by the bootloader to map the first parent interrupt to the boot CPU, regardless wether the boot CPU is the first one or the second one. When booting from the second CPU, the assumption that the first block's IRQ is mapped to the first CPU breaks, and the system hangs because interrupts do not get routed correctly. Fix this by passing the appropriate bcm6434_l1_cpu to the interrupt handler instead of the chip itself, so the handler always has the right block. Fixes: c7c42ec2baa1 ("irqchips/bmips: Add bcm6345-l1 interrupt controller") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230629072620.62527-1-jonas.gorski@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03tpm_tis: Explicitly check for error codeAlexander Steffen1-2/+7
commit 513253f8c293c0c8bd46d09d337fc892bf8f9f48 upstream. recv_data either returns the number of received bytes, or a negative value representing an error code. Adding the return value directly to the total number of received bytes therefore looks a little weird, since it might add a negative error code to a sum of bytes. The following check for size < expected usually makes the function return ETIME in that case, so it does not cause too many problems in practice. But to make the code look cleaner and because the caller might still be interested in the original error code, explicitly check for the presence of an error code and pass that through. Cc: stable@vger.kernel.org Fixes: cb5354253af2 ("[PATCH] tpm: spacing cleanups 2") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info()Guanghui Feng1-3/+0
commit 003e6b56d780095a9adc23efc9cb4b4b4717169b upstream. According to the ARM IORT specifications DEN 0049 issue E, the "Number of IDs" field in the ID mapping format reports the number of IDs in the mapping range minus one. In iort_node_get_rmr_info(), we erroneously skip ID mappings whose "Number of IDs" equal to 0, resulting in valid mapping nodes with a single ID to map being skipped, which is wrong. Fix iort_node_get_rmr_info() by removing the bogus id_count check. Fixes: 491cf4a6735a ("ACPI/IORT: Add support to retrieve IORT RMR reserved regions") Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com> Cc: <stable@vger.kernel.org> # 6.0.x Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Tested-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1689593625-45213-1-git-send-email-guanghuifeng@linux.alibaba.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03nfsd: Remove incorrect check in nfsd4_validate_stateidTrond Myklebust1-2/+0
commit f75546f58a70da5cfdcec5a45ffc377885ccbee8 upstream. If the client is calling TEST_STATEID, then it is because some event occurred that requires it to check all the stateids for validity and call FREE_STATEID on the ones that have been revoked. In this case, either the stateid exists in the list of stateids associated with that nfs4_client, in which case it should be tested, or it does not. There are no additional conditions to be considered. Reported-by: "Frank Ch. Eigler" <fche@redhat.com> Fixes: 7df302f75ee2 ("NFSD: TEST_STATEID should not return NFS4ERR_STALE_STATEID") Cc: stable@vger.kernel.org # v5.7+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03file: always lock position for FMODE_ATOMIC_POSChristian Brauner1-4/+2
commit 20ea1e7d13c1b544fe67c4a8dc3943bb1ab33e6f upstream. The pidfd_getfd() system call allows a caller with ptrace_may_access() abilities on another process to steal a file descriptor from this process. This system call is used by debuggers, container runtimes, system call supervisors, networking proxies etc. So while it is a special interest system call it is used in common tools. That ability ends up breaking our long-time optimization in fdget_pos(), which "knew" that if we had exclusive access to the file descriptor nobody else could access it, and we didn't need the lock for the file position. That check for file_count(file) was always fairly subtle - it depended on __fdget() not incrementing the file count for single-threaded processes and thus included that as part of the rule - but it did mean that we didn't need to take the lock in all those traditional unix process contexts. So it's sad to see this go, and I'd love to have some way to re-instate the optimization. At the same time, the lock obviously isn't ever contended in the case we optimized, so all we were optimizing away is the atomics and the cacheline dirtying. Let's see if anybody even notices that the optimization is gone. Link: https://lore.kernel.org/linux-fsdevel/20230724-vfs-fdget_pos-v1-1-a4abfd7103f3@kernel.org/ Fixes: 8649c322f75c ("pid: Implement pidfd_getfd syscall") Cc: stable@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocksYazen Ghannam1-2/+2
commit 3ba2e83334bed2b1980b59734e6e84dfaf96026c upstream. AMD systems from Family 10h to 16h share MCA bank 4 across multiple CPUs. Therefore, the threshold_bank structure for bank 4, and its threshold_block structures, will be initialized once at boot time. And the kobject for the shared bank will be added to each of the CPUs that share it. Furthermore, the threshold_blocks for the shared bank will be added again to the bank's kobject. These additions will increase the refcount for the bank's kobject. For example, a shared bank with two blocks and shared across two CPUs will be set up like this: CPU0 init bank create and add; bank refcount = 1; threshold_create_bank() block 0 init and add; bank refcount = 2; allocate_threshold_blocks() block 1 init and add; bank refcount = 3; allocate_threshold_blocks() CPU1 init bank add; bank refcount = 3; threshold_create_bank() block 0 add; bank refcount = 4; __threshold_add_blocks() block 1 add; bank refcount = 5; __threshold_add_blocks() Currently in threshold_remove_bank(), if the bank is shared then __threshold_remove_blocks() is called. Here the shared bank's kobject and the bank's blocks' kobjects are deleted. This is done on the first call even while the structures are still shared. Subsequent calls from other CPUs that share the structures will attempt to delete the kobjects. During kobject_del(), kobject->sd is removed. If the kobject is not part of a kset with default_groups, then subsequent kobject_del() calls seem safe even with kobject->sd == NULL. Originally, the AMD MCA thresholding structures did not use default_groups. And so the above behavior was not apparent. However, a recent change implemented default_groups for the thresholding structures. Therefore, kobject_del() will go down the sysfs_remove_groups() code path. In this case, the first kobject_del() may succeed and remove kobject->sd. But subsequent kobject_del() calls will give a WARNing in kernfs_remove_by_name_ns() since kobject->sd == NULL. Use kobject_put() on the shared bank's kobject when "removing" blocks. This decrements the bank's refcount while keeping kobjects enabled until the bank is no longer shared. At that point, kobject_put() will be called on the blocks which drives their refcount to 0 and deletes them and also decrementing the bank's refcount. And finally kobject_put() will be called on the bank driving its refcount to 0 and deleting it. The same example above: CPU1 shutdown bank is shared; bank refcount = 5; threshold_remove_bank() block 0 put parent bank; bank refcount = 4; __threshold_remove_blocks() block 1 put parent bank; bank refcount = 3; __threshold_remove_blocks() CPU0 shutdown bank is no longer shared; bank refcount = 3; threshold_remove_bank() block 0 put block; bank refcount = 2; deallocate_threshold_blocks() block 1 put block; bank refcount = 1; deallocate_threshold_blocks() put bank; bank refcount = 0; threshold_remove_bank() Fixes: 7f99cb5e6039 ("x86/CPU/AMD: Use default_groups in kobj_type") Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Mikulas Patocka <mpatocka@redhat.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/alpine.LRH.2.02.2205301145540.25840@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03btrfs: check for commit error at btrfs_attach_transaction_barrier()Filipe Manana1-2/+7
commit b28ff3a7d7e97456fd86b68d24caa32e1cfa7064 upstream. btrfs_attach_transaction_barrier() is used to get a handle pointing to the current running transaction if the transaction has not started its commit yet (its state is < TRANS_STATE_COMMIT_START). If the transaction commit has started, then we wait for the transaction to commit and finish before returning - however we completely ignore if the transaction was aborted due to some error during its commit, we simply return ERR_PT(-ENOENT), which makes the caller assume everything is fine and no errors happened. This could make an fsync return success (0) to user space when in fact we had a transaction abort and the target inode changes were therefore not persisted. Fix this by checking for the return value from btrfs_wait_for_commit(), and if it returned an error, return it back to the caller. Fixes: d4edf39bd5db ("Btrfs: fix uncompleted transaction") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03btrfs: check if the transaction was aborted at btrfs_wait_for_commit()Filipe Manana1-0/+1
commit bf7ecbe9875061bf3fce1883e3b26b77f847d1e8 upstream. At btrfs_wait_for_commit() we wait for a transaction to finish and then always return 0 (success) without checking if it was aborted, in which case the transaction didn't happen due to some critical error. Fix this by checking if the transaction was aborted. Fixes: 462045928bda ("Btrfs: add START_SYNC, WAIT_SYNC ioctls") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03btrfs: account block group tree when calculating global reserve sizeFilipe Manana1-0/+5
commit 8dbfc14fc736eb701089aff09645c3d4ad3decb1 upstream. When using the block group tree feature, this tree is a critical tree just like the extent, csum and free space trees, and just like them it uses the delayed refs block reserve. So take into account the block group tree, and its current size, when calculating the size for the global reserve. CC: stable@vger.kernel.org # 6.1+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03hwmon: (nct7802) Fix for temp6 (PECI1) processed even if PECI1 disabledGilles Buloz1-1/+1
commit 54685abe660a59402344d5045ce08c43c6a5ac42 upstream. Because of hex value 0x46 used instead of decimal 46, the temp6 (PECI1) temperature is always declared visible and then displayed even if disabled in the chip Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com> Link: https://lore.kernel.org/r/DU0PR10MB62526435ADBC6A85243B90E08002A@DU0PR10MB6252.EURPRD10.PROD.OUTLOOK.COM Fixes: fcdc5739dce03 ("hwmon: (nct7802) add temperature sensor type attribute") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03hwmon: (k10temp) Enable AMD3255 Proc to show negative temperatureBaskaran Kannan1-2/+15
commit e146503ac68418859fb063a3a0cd9ec93bc52238 upstream. Industrial processor i3255 supports temperatures -40 deg celcius to 105 deg Celcius. The current implementation of k10temp_read_temp rounds off any negative temperatures to '0'. To fix this, the following changes have been made. A flag 'disp_negative' is added to struct k10temp_data to support AMD i3255 processors. Flag 'disp_negative' is set if 3255 processor is found during k10temp_probe. Flag 'disp_negative' is used to determine whether to round off negative temperatures to '0' in k10temp_read_temp. Signed-off-by: Baskaran Kannan <Baski.Kannan@amd.com> Link: https://lore.kernel.org/r/20230727162159.1056136-1-Baski.Kannan@amd.com Fixes: aef17ca12719 ("hwmon: (k10temp) Only apply temperature offset if result is positive") Cc: stable@vger.kernel.org [groeck: Fixed multi-line comment] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03ALSA: hda/relatek: Enable Mute LED on HP 250 G8Luka Guzenko1-0/+1
commit d510acb610e6aa07a04b688236868b2a5fd60deb upstream. This HP Notebook used ALC236 codec with COEF 0x07 idx 1 controlling the mute LED. Enable already existing quirk for this device. Signed-off-by: Luka Guzenko <l.guzenko@web.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230725111509.623773-1-l.guzenko@web.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03ALSA: hda/realtek: Support ASUS G713PV laptopPavel Asyutchenko1-0/+1
commit 8019a4ab3d80c7af391a646cccff953753fc025f upstream. This laptop has CS35L41 amp connected via I2C. With this patch speakers begin to work if the missing _DSD properties are added to ACPI tables. Signed-off-by: Pavel Asyutchenko <svenpavel@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230726223732.20775-1-svenpavel@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03Revert "xhci: add quirk for host controllers that don't update endpoint DCS"Oliver Neukum2-27/+2
commit 5bef4b3cb95a5b883dfec8b3ffc0d671323d55bb upstream. This reverts commit 5255660b208aebfdb71d574f3952cf48392f4306. This quirk breaks at least the following hardware: 0b:00.0 0c03: 1106:3483 (rev 01) (prog-if 30 [XHCI]) Subsystem: 1106:3483 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 66 Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=4K] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+ Address: 00000000fee007b8 Data: 0000 Capabilities: [c4] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 89W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Kernel driver in use: xhci_hcd Kernel modules: xhci_pci with the quirk enabled it fails early with [ 0.754373] pci 0000:0b:00.0: xHCI HW did not halt within 32000 usec status = 0x1000 [ 0.754419] pci 0000:0b:00.0: quirk_usb_early_handoff+0x0/0x7a0 took 31459 usecs [ 2.228048] xhci_hcd 0000:0b:00.0: xHCI Host Controller [ 2.228053] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 7 [ 2.260073] xhci_hcd 0000:0b:00.0: Host halt failed, -110 [ 2.260079] xhci_hcd 0000:0b:00.0: can't setup: -110 [ 2.260551] xhci_hcd 0000:0b:00.0: USB bus 7 deregistered [ 2.260624] xhci_hcd 0000:0b:00.0: init 0000:0b:00.0 fail, -110 [ 2.260639] xhci_hcd: probe of 0000:0b:00.0 failed with error -110 The hardware in question is an external PCIe card. It looks to me like the quirk needs to be narrowed down. But this needs information about the hardware showing the issue this quirk is to fix. So for now a clean revert. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 5255660b208a ("xhci: add quirk for host controllers that don't update endpoint DCS") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230713112830.21773-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03tty: n_gsm: fix UAF in gsm_cleanup_muxChaoyuan Peng1-1/+3
commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239 upstream. In gsm_cleanup_mux() the 'gsm->dlci' pointer was not cleaned properly, leaving it a dangling pointer after gsm_dlci_release. This leads to use-after-free where 'gsm->dlci[0]' are freed and accessed by the subsequent gsm_cleanup_mux(). Such is the case in the following call trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106 print_address_description+0x63/0x3b0 mm/kasan/report.c:248 __kasan_report mm/kasan/report.c:434 [inline] kasan_report+0x16b/0x1c0 mm/kasan/report.c:451 gsm_cleanup_mux+0x76a/0x850 drivers/tty/n_gsm.c:2397 gsm_config drivers/tty/n_gsm.c:2653 [inline] gsmld_ioctl+0xaae/0x15b0 drivers/tty/n_gsm.c:2986 tty_ioctl+0x8ff/0xc50 drivers/tty/tty_io.c:2816 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x61/0xcb </TASK> Allocated by task 3501: kasan_save_stack mm/kasan/common.c:38 [inline] kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] ____kasan_kmalloc+0xba/0xf0 mm/kasan/common.c:513 kasan_kmalloc include/linux/kasan.h:264 [inline] kmem_cache_alloc_trace+0x143/0x290 mm/slub.c:3247 kmalloc include/linux/slab.h:591 [inline] kzalloc include/linux/slab.h:721 [inline] gsm_dlci_alloc+0x53/0x3a0 drivers/tty/n_gsm.c:1932 gsm_activate_mux+0x1c/0x330 drivers/tty/n_gsm.c:2438 gsm_config drivers/tty/n_gsm.c:2677 [inline] gsmld_ioctl+0xd46/0x15b0 drivers/tty/n_gsm.c:2986 tty_ioctl+0x8ff/0xc50 drivers/tty/tty_io.c:2816 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x61/0xcb Freed by task 3501: kasan_save_stack mm/kasan/common.c:38 [inline] kasan_set_track+0x4b/0x80 mm/kasan/common.c:46 kasan_set_free_info+0x1f/0x40 mm/kasan/generic.c:360 ____kasan_slab_free+0xd8/0x120 mm/kasan/common.c:366 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_hook mm/slub.c:1705 [inline] slab_free_freelist_hook+0xdd/0x160 mm/slub.c:1731 slab_free mm/slub.c:3499 [inline] kfree+0xf1/0x270 mm/slub.c:4559 dlci_put drivers/tty/n_gsm.c:1988 [inline] gsm_dlci_release drivers/tty/n_gsm.c:2021 [inline] gsm_cleanup_mux+0x574/0x850 drivers/tty/n_gsm.c:2415 gsm_config drivers/tty/n_gsm.c:2653 [inline] gsmld_ioctl+0xaae/0x15b0 drivers/tty/n_gsm.c:2986 tty_ioctl+0x8ff/0xc50 drivers/tty/tty_io.c:2816 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x61/0xcb Fixes: aa371e96f05d ("tty: n_gsm: fix restart handling via CLD command") Signed-off-by: Chaoyuan Peng <hedonistsmith@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()Zhang Shurong1-2/+4
commit 5f1c7031e044cb2fba82836d55cc235e2ad619dc upstream. The "exc->key_len" is a u16 that comes from the user. If it's over IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption. Fixes: b121d84882b9 ("staging: ks7010: simplify calls to memcpy()") Cc: stable <stable@kernel.org> Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/tencent_5153B668C0283CAA15AA518325346E026A09@qq.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03staging: r8712: Fix memory leak in _r8712_init_xmit_priv()Larry Finger2-9/+40
commit ac83631230f77dda94154ed0ebfd368fc81c70a3 upstream. In the above mentioned routine, memory is allocated in several places. If the first succeeds and a later one fails, the routine will leak memory. This patch fixes commit 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel"). A potential memory leak in r8712_xmit_resource_alloc() is also addressed. Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel") Reported-by: syzbot+cf71097ffb6755df8251@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/x/log.txt?x=11ac3fa0a80000 Cc: stable@vger.kernel.org Cc: Nam Cao <namcaov@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by: Nam Cao <namcaov@gmail.com> Link: https://lore.kernel.org/r/20230714175417.18578-1-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03Documentation: security-bugs.rst: clarify CVE handlingGreg Kroah-Hartman1-7/+6
commit 3c1897ae4b6bc7cc586eda2feaa2cd68325ec29c upstream. The kernel security team does NOT assign CVEs, so document that properly and provide the "if you want one, ask MITRE for it" response that we give on a weekly basis in the document, so we don't have to constantly say it to everyone who asks. Link: https://lore.kernel.org/r/2023063022-retouch-kerosene-7e4a@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03Documentation: security-bugs.rst: update preferences when dealing with the ↵Greg Kroah-Hartman1-14/+12
linux-distros group commit 4fee0915e649bd0cea56dece6d96f8f4643df33c upstream. Because the linux-distros group forces reporters to release information about reported bugs, and they impose arbitrary deadlines in having those bugs fixed despite not actually being kernel developers, the kernel security team recommends not interacting with them at all as this just causes confusion and the early-release of reported security problems. Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/2023063020-throat-pantyhose-f110@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-22 04:25:56 +0300