summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2008-02-29rt2x00: Update copyright noticeIvo van Doorn26-26/+26
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29wireless/iwlwifi/iwl-4965.c: add parenthesesRoel Kluin1-1/+1
'!' has a higher priority than '&': bitanding has no effect. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: dissolve pre-rx handlersJohannes Berg3-62/+37
These handlers do not really return a status and the compiler can do a much better job when they're simply static functions that it can inline if appropriate. Also makes the code shorter. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29iwlwifi: enable 802.11n in KconfigTomas Winkler1-1/+0
This patch removes 'IWL4965_HT: depends on n' from iwlwifi's Kconfig 1. 11n is functional so no need to make it invisible in the configuration 2. Latest Johannes patch 'cfg80211 API for channels/bitrates, mac80211 and driver conversion' broke compilation because this config option was invisible - patch fixing it will be provided later Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29iwlwifi: A-MPDU Tx activation by load measuresRon Rindjunsky5-487/+199
This patch gives a heuristic for activation of the A-MPDU Tx. As the rate scaling is rate aware, it now also measures estimated load, and sends A-MPDU activation after a threshold has been met. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29iwlwifi: A-MPDU Tx conform block Ack rate scaling to mac80211Ron Rindjunsky2-34/+60
This patch uses the changes in ieee80211_tx_status to pass Block Ack data to rate scaling module, and uses this data in rate scaling calculations Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29iwlwifi: A-MPDU Tx conform flows to mac80211Ron Rindjunsky4-221/+302
This patch alters the current iwlwifi behavior to fit the flows introduced by the mac80211, mainly queues handling and start/stop call backs flows Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29iwlwifi: A-MPDU Tx conform API to mac80211Ron Rindjunsky3-38/+47
This patch alters the current API in order to fit the new API mac80211 gives for A-MPDU Tx Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: A-MPDU Tx add delBA from recipient supportRon Rindjunsky1-2/+11
This patch adds the ability to handle delBA from recipient to initiator during an A-MPDU session Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: A-MPDU Tx change tx_status to support Block Ack dataRon Rindjunsky1-9/+12
This patch adds fields to ieee80211_tx_status in order to allow block ack information exchange between low-level driver,mac80211 and rate scaling module. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: A-MPDU add debugfs supportRon Rindjunsky2-0/+117
This patch adds A-MPDU status report per STA to the debugfs. The option to de/activate A-MPDU through debugfs is also present. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: A-MPDU Tx MLME data initializationRon Rindjunsky1-1/+12
This patch initialize A-MPDU MLME data for Tx sessions. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: A-MPDU Tx adding qdisc supportRon Rindjunsky6-20/+161
This patch allows qdisc support in A-MPDU Tx. a method to handle QoS <-> TID switches is present in this patch. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: A-MPDU Tx adding basic functionalityRon Rindjunsky3-2/+530
This patch adds the following abilities to mac80211: - start A-MPDU Tx session - stop A-MPDU Tx session - call backs to start/stop A-MPDU Tx session - sending addBA request - processing addBA response Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: A-MPDU Tx add MLME structuresRon Rindjunsky1-3/+33
This patch adds the needed structures to describe the Tx aggregation MLME per STA new: - struct tid_ampdu_tx: TID aggregation information (Tx) changed: - struct sta_ampdu_mlme: Tx aggregation information per TID and dialog token creator were added - struct sta_info: tid_to_tx_q added for tid<->tx queue mapping Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: A-MPDU Tx add session's and low level driver's APIRon Rindjunsky4-7/+89
This patch adds the API for 3 stages in A-MPDU Tx session flow: - request mac80211 to start/stop A-MPDU Tx session for specific TID. such a request should be issued by a load aware element, either mac80211 itself or external element. - requests by mac80211 to low-level driver to start/stop Tx aggregation. notice that low level driver responds now with Starting Sequence Number. - async feedback by low-level to mac80211 to inform that HW is ready for next A-MPDU Tx state. Changes in API to Rx A-MPDU were also made, reflected in iwlwifi changes as well. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29libertas: rename/document scan_channelHolger Schurig3-13/+15
Rename last_scanned_channel to scan_channel, just so that a grep for struct bss_descriptor's last_scanned element doesn't show up so many positives. Also documented the variable and moved it to other scan related entries in lbs_private. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29libertas: make lbs_unset_basic_rate_flags() staticHolger Schurig3-19/+17
... by moving it into the file where it's sole user resides Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29libertas: make lbs_sync_channel() staticHolger Schurig3-13/+13
... by moving it into the file where it's sole user resides Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29libertas: make association debug output nicerHolger Schurig3-10/+4
This also fixes a bug where should_deauth_infrastructure() always returned 0. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29libertas: trim overly long debug statementHolger Schurig2-18/+9
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: allow sending multicast frames through virtual portsJohannes Berg1-6/+15
When reworking the port access control code, I forgot multicast frames and those are now always rejected because the destination station is not known. This changes the code to allow through multicast frames and also avoid the sta hash lookup (which is bound to fail) for them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: set assoc flag to bss_confTomas Winkler1-0/+1
Only BSS_CHANGED_ASSOC was set in the 'changed' bitmask. Assignment to bss_conf.assoc was absent. This patch assign value to bss_conf.assoc according the association state. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29[NIU]: Add Support for Sun ATCA Blade Server.Matheos Worku2-74/+631
Ports 0 and 1 of the NIU device are connected to extended fabric through SERDES. Ports 2 and 3 are connected using RGMII Fiber mode. [ Coding style cleanups... -DaveM ] Signed-off-by: Matheos Worku <matheos.worku@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[IPV6]: Fix source address selection for ORCHID addressesJuha-Matti Tapio2-0/+15
Skip the prefix length matching in source address selection for orchid -> non-orchid addresses. Overlay Routable Cryptographic Hash IDentifiers (RFC 4843, 2001:10::/28) are currenty not globally reachable. Without this check a host with an ORCHID address can end up preferring those over regular addresses when talking to other regular hosts in the 2001::/16 range thus breaking non-orchid connections. Signed-off-by: Juha-Matti Tapio <jmtapio@verkkotelakka.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[IPV6]: Add ORCHID prefix to address label tableJuha-Matti Tapio1-0/+5
Add a new label for Overlay Routable Cryptographic Hash Identifiers (RFC 4843) prefix 2001:10::/28 to help proper source address selection. ORCHID addresses are used by for example Host Identity Protocol. They are global and routable, but they currently need support from both endpoints and therefore mixing regular and ORCHID addresses for source and destination is a bad idea in general case. Signed-off-by: Juha-Matti Tapio <jmtapio@verkkotelakka.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Process inet_select_addr inside a namespace.Denis V. Lunev1-1/+2
The context is available from a network device passed in. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Enable IPv4 address manipulations inside namespace.Denis V. Lunev1-9/+0
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Enable all routing manipulation via netlink inside namespace.Denis V. Lunev1-8/+8
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Process devinet ioctl in the correct namespace.Denis V. Lunev4-8/+9
Add namespace parameter to devinet_ioctl and locate device inside it for state changes. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Register /proc/net/rt_cache for each namespace.Denis V. Lunev1-3/+21
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Process /proc/net/rt_cache inside a namespace.Denis V. Lunev1-3/+7
Show routing cache for a particular namespace only. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[IPV4]: rt_cache_get_next should take rt_genid into account.Denis V. Lunev1-5/+13
In the other case /proc/net/rt_cache will look inconsistent in respect to genid. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Process ip_rt_redirect in the correct namespace.Denis V. Lunev1-2/+5
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: DST cleanup routines should be called inside namespace.Denis V. Lunev1-3/+0
Device inside the namespace can be started and downed. So, active routing cache should be cleaned up on device stop. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Enable inetdev_event notifier.Denis V. Lunev1-3/+0
After all these preparations it is time to enable main IPv4 device initialization routine inside namespace. It is safe do this now. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Disable multicaststing configuration inside non-initial namespace.Denis V. Lunev1-0/+39
Do not calls hooks from device notifiers and disallow configuration from ioctl/netlink layer. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Default arp parameters lookup.Denis V. Lunev1-3/+1
Default ARP parameters should be findable regardless of the context. Required to make inetdev_event working. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Register neighbour table parameters in the correct namespace.Denis V. Lunev1-1/+2
neigh_sysctl_register should register sysctl entries inside correct namespace to avoid naming conflict. Typical example is a loopback. Entries for it present in all namespaces. Required to make inetdev_event working. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETNS]: Disable inetaddr notifiers in namespaces other than initial.Denis V. Lunev4-0/+12
ip_fib_init is kept enabled. It is already namespace-aware. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[NETFILTER]: Consolidate masq_inet_event and masq_device_event.Denis V. Lunev1-12/+2
They do exactly the same job. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[IPV4]: Remove check for ifa->ifa_dev != NULL.Denis V. Lunev1-4/+0
This is a callback registered to inet address notifier chain. The check is useless as: - ifa->ifa_dev is always != NULL - similar checks are abscent in all other notifiers. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[IPV4]: Remove ifa != NULL check.Denis V. Lunev1-12/+10
This is a callback registered to inet address notifier chain. The check is useless as: - ifa is always != NULL - similar checks are abscent in all other notifiers. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[X25]: Use proc_create() to setup ->proc_fops firstWang Chen1-6/+4
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[WANROUTER]: Use proc_create() to setup ->proc_fops firstWang Chen1-6/+4
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[8021Q]: Use proc_create() to setup ->proc_fops firstWang Chen1-7/+4
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[IPV4]: Use proc_create() to setup ->proc_fops firstWang Chen1-3/+2
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[IPV6]: Use proc_create() to setup ->proc_fops firstWang Chen1-2/+2
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[SCTP]: Use proc_create() to setup ->proc_fops firstWang Chen2-6/+3
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-29[PKTGEN]: Use proc_create() to setup ->proc_fops firstWang Chen1-6/+4
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 06:42:15 +0300