summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-05-25Blackfin: move internal irq prototypes out of global namespaceMike Frysinger8-10/+16
These are only used in a few internal Blackfin places, so move the irq prototypes out of the global header and into the internal irq one. No functional changes other than shuffling locales. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: clean up irq ifdef logic a bitMike Frysinger1-47/+39
Prefer MMR named checks over part-specific lists, condense duplicated code across different #ifdef branches, simplify CONFIG_PM ifdefs, and drop unused kgdb header. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: bf51x/bf52x: fix typo in hysteresis MMR namesMike Frysinger5-28/+28
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: delete duplicated user single step prototypesMike Frysinger1-2/+0
These are in linux/ptrace.h, so no need for us to duplicate them. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: kgdb: cache flushing is not safe in SMP modeSonic Zhang1-1/+5
Make sure we mark cache flushing as unsafe to kgdb in SMP mode so that kgdb doesn't flush things incorrectly on us. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: SMP: drop unused blackfin_cpudata.idle pointerMike Frysinger2-4/+0
Not sure when we stopped using this field, but nothing in the tree uses this now, so punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: SMP: fix cpudata cache setupMike Frysinger2-5/+2
After some cache setup reordering changesets, the blackfin_cpudata init was left behind. While cpu0's data was correct, cpu1's data was not. Not that big of a deal as these are only used in the cpuinfo output, but should still be fixed. So move the setup of these fields to the common cache setup function to avoid this happening again in the future. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: clean up /proc/cpuinfo outputMike Frysinger1-8/+8
The smp flush lines are too long and have too many newlines, so scale them back to match the other lines. The %p modifier shows "(null)" for 0, so use %08x instead. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: bf527-ezkit: tweak sound defconfigMike Frysinger2-15/+11
Build the sound pieces that the board actually has into the kernel, and punt older devices that we discourage. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: bf533/bf537/bf561: convert to BFIN_IRQ helperMike Frysinger3-122/+121
This brings the parts in line with newer ones, and makes things easier to read at a glance. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: clean up style in irq definesMike Frysinger7-695/+627
These files had a lot of whitespace damage, mostly due to copying and pasting original files that had damage. The BF561 header also had a lot of unused CONFIG_DEF_xxx defines, so punt them all. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: unify core IRQ definitionsMike Frysinger8-379/+64
Start a new common IRQ header and move all of the CEC pieces there. This lets the individual part headers worry just about its SIC defines. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: ints-priority: unify duplicate vec to irq lookup logicMike Frysinger1-68/+44
Seems the ipipe code just copied & pasted the existing irq lookup logic, so pull the logic out of do_irq() and into a local helper, and convert the two users over to that. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: ints-priority: clean up some local varsMike Frysinger1-17/+8
The local ivg structs need not be exported, so mark them as static. Further, the "num_spurious" variable is only incremented and never actually read anywhere, so punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: don't attempt to flush on-chip L1 SRAM regionsSonic Zhang1-5/+18
Since the on-chip L1 regions are not cacheable, there is no point in trying to flush/invalidate them. Plus, older Blackfin parts like to trigger an exception (like BF533-0.3). Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: first pass at debug mmr supportMike Frysinger3-1/+1863
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Merge branch 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linuxLinus Torvalds8-115/+263
* 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linux: (21 commits) mach-ux500: set proper I2C platform data from MOP500s i2c-nomadik: break out single messsage transmission i2c-nomadik: reset the hw after status check i2c-nomadik: remove the unnecessary delay i2c-nomadik: change the TX and RX threshold i2c-nomadik: add code to retry on timeout failure i2c-nomadik: use pm_runtime API i2c-nomadik: print abort cause only on abort tag i2c-nomadik: correct adapter timeout initialization i2c-nomadik: remove the redundant error message i2c-nomadik: corrrect returned error numbers i2c-nomadik: fix speed enumerator i2c-nomadik: make i2c timeout specific per i2c bus i2c-nomadik: add regulator support i2c: i2c-sh_mobile bus speed platform data V2 i2c: i2c-sh_mobile clock string removal i2c-eg20t: Support new device ML7223 IOH i2c: tegra: Add de-bounce cycles. i2c: tegra: fix repeated start handling i2c: tegra: recover from spurious interrupt storm ...
2011-05-25Merge branches 'for-2639/i2c-eg20t', 'for-2639/i2c-shmobile', ↵Ben Dooks5084-325333/+334116
'for-2639/i2c-tegra' and 'for-2639/i2c-nomadik2' into for-linus/2640/i2c
2011-05-25mach-ux500: set proper I2C platform data from MOP500sLinus Walleij1-6/+8
This specifies the new per-platform timeout per I2C bus and switches the I2C buses to fast mode, and increase the FIFO depth to 8 for reads and writes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: break out single messsage transmissionLinus Walleij1-32/+48
Reduce code size in the message transfer function by factoring out a single-message transfer function. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: reset the hw after status checkVirupax Sadashivpetimath1-4/+4
In case of I2C timeout, reset the HW only after the HW status is read, otherwise the staus will be lost. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: remove the unnecessary delayVirupax Sadashivpetimath1-18/+2
The delay in the driver seems to be not needed, so remove it. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Markus Grape <markus.grape@stericsson.com> Tested-by: Per Persson <per.xb.persson@stericsson.com> Tested-by: Chethan Krishna N <chethan.krishna@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: change the TX and RX thresholdVirupax Sadashivpetimath1-13/+26
1) Increase RX FIFO threshold so that there is a reduction in the number of interrupts handled to complete a transaction. 2) Fill TX FIFO in the write function. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: add code to retry on timeout failureVirupax Sadashivpetimath1-48/+49
It is seen that i2c-nomadik controller randomly stops generating the interrupts leading to a i2c timeout. As a workaround to this problem, add retries to the on going transfer on failure. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: use pm_runtime APIRabin Vincent1-6/+31
Use the pm_runtime API for pins control. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> [deleted some surplus runtime PM code] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: print abort cause only on abort tagVirupax Sadashivpetimath1-8/+19
Modify the code to: 1)Print the cause of i2c failure only if the status is set to ABORT. 2)Print slave address on send/receive fail, will help in which slave failed. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: correct adapter timeout initializationVirupax Sadashivpetimath1-4/+5
Correct the incorrect initialization of adapter timeout not to be in milliseconds, as it needs to be done in jiffies. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: remove the redundant error messagesrinidhi kasagar1-2/+0
The abort cause string itself is an error, so remove the redundant explicit error message. Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: corrrect returned error numbersVirupax Sadashivpetimath1-4/+6
The code was returning bad error numbers or just -1 in some cases. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: fix speed enumeratorLinus Walleij1-1/+1
The I2C speed enumerators in the i2c-nomadik header file were in the wrong order. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: make i2c timeout specific per i2c busVirupax Sadashivpetimath2-8/+8
Add option to have different i2c timeout delay for different i2c buses specified in platform data. Default to the old value unless specified. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: add regulator supportJonas Aberg1-15/+58
This on-chip I2C controller needs to fetch the regulator representing its voltage domain so that it won't be switched off. Signed-off-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25Merge branch 'i2c-for-linus' of ↵Linus Torvalds7-83/+97
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-parport: Various cleanups i2c-i801: Don't depend on other kernel driver config options i2c-i801: Check for vendor Fujitsu before probing for apanel i2c-i801: Don't probe for slaves on IDF channels i2c-i801: SMBus patch for Intel Panther Point DeviceIDs i2c/writing-clients: Fix foo_driver.id_table
2011-05-25Merge branch 'for_linus' of ↵Linus Torvalds6-32/+91
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: jbd: Fix comment to match the code in journal_start() jbd/jbd2: remove obsolete summarise_journal_usage. jbd: Fix forever sleeping process in do_get_write_access() ext2: fix error msg when mounting fs with too-large blocksize jbd: fix fsync() tid wraparound bug ext3: Fix fs corruption when make_indexed_dir() fails ext3: Fix lock inversion in ext3_symlink()
2011-05-25Merge branch 'for-linus' of ↵Linus Torvalds9-51/+223
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: make plock operation killable dlm: remove shared message stub for recovery dlm: delayed reply message warning dlm: Remove superfluous call to recalc_sigpending()
2011-05-25Merge branch 'for-linus' of ↵Linus Torvalds39-284/+603
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (43 commits) TOMOYO: Fix wrong domainname validation. SELINUX: add /sys/fs/selinux mount point to put selinuxfs CRED: Fix load_flat_shared_library() to initialise bprm correctly SELinux: introduce path_has_perm flex_array: allow 0 length elements flex_arrays: allow zero length flex arrays flex_array: flex_array_prealloc takes a number of elements, not an end SELinux: pass last path component in may_create SELinux: put name based create rules in a hashtable SELinux: generic hashtab entry counter SELinux: calculate and print hashtab stats with a generic function SELinux: skip filename trans rules if ttype does not match parent dir SELinux: rename filename_compute_type argument to *type instead of *con SELinux: fix comment to state filename_compute_type takes an objname not a qstr SMACK: smack_file_lock can use the struct path LSM: separate LSM_AUDIT_DATA_DENTRY from LSM_AUDIT_DATA_PATH LSM: split LSM_AUDIT_DATA_FS into _PATH and _INODE SELINUX: Make selinux cache VFS RCU walks safe SECURITY: Move exec_permission RCU checks into security modules SELinux: security_read_policy should take a size_t not ssize_t ...
2011-05-25Merge branch 'kbuild' of ↵Linus Torvalds20-108/+287
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: make KBUILD_NOCMDDEP=1 handle empty built-in.o scripts/kallsyms.c: fix potential segfault scripts/gen_initramfs_list.sh: Convert to a /bin/sh script kbuild: Fix GNU make v3.80 compatibility kbuild: Fix passing -Wno-* options to gcc 4.4+ kbuild: move scripts/basic/docproc.c to scripts/docproc.c kbuild: Fix Makefile.asm-generic for um kbuild: Allow to combine multiple W= levels kbuild: Disable -Wunused-but-set-variable for gcc 4.6.0 Fix handling of backlash character in LINUX_COMPILE_BY name kbuild: asm-generic support kbuild: implement several W= levels kbuild: Fix build with binutils <= 2.19 initramfs: Use KBUILD_BUILD_TIMESTAMP for generated entries kbuild: Allow to override LINUX_COMPILE_BY and LINUX_COMPILE_HOST macros kbuild: Drop unused LINUX_COMPILE_TIME and LINUX_COMPILE_DOMAIN macros kbuild: Use the deterministic mode of ar kbuild: Call gzip with -n kbuild: move KALLSYMS_EXTRA_PASS from Kconfig to Makefile Kconfig: improve KALLSYMS_ALL documentation Fix up trivial conflict in Makefile
2011-05-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds60-63/+63
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: Make struct pcmcia_device_id const, sound drivers edition staging: pcmcia: Convert pcmcia_device_id declarations to const pcmcia: Convert pcmcia_device_id declarations to const pcmcia: Make declaration and uses of struct pcmcia_device_id const pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data
2011-05-24Merge branch 'drm-core-next' of ↵Linus Torvalds104-4045/+9392
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (169 commits) drivers/gpu/drm/radeon/atom.c: fix warning drm/radeon/kms: bump kms version number drm/radeon/kms: properly set num banks for fusion asics drm/radeon/kms/atom: move dig phy init out of modesetting drm/radeon/kms/cayman: fix typo in register mask drm/radeon/kms: fix typo in spread spectrum code drm/radeon/kms: fix tile_config value reported to userspace on cayman. drm/radeon/kms: fix incorrect comparison in cayman setup code. drm/radeon/kms: add wait idle ioctl for eg->cayman drm/radeon/cayman: setup hdp to invalidate and flush when asked drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when asked agp/uninorth: Fix lockups with radeon KMS and >1x. drm/radeon/kms: the SS_Id field in the LCD table if for LVDS only drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices drm/radeon/kms: fixup eDP connector handling drm/radeon/kms: bail early for eDP in hotplug callback drm/radeon/kms: simplify hotplug handler logic drm/radeon/kms: rewrite DP handling drm/radeon/kms/atom: add support for setting DP panel mode drm/radeon/kms: atombios.h updates for DP panel mode ...
2011-05-24Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds58-1284/+895
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (29 commits) [S390] cpu hotplug: fix external interrupt subclass mask handling [S390] oprofile: dont access lowcore [S390] oprofile: add missing irq stats counter [S390] Ignore sendmmsg system call note wired up warning [S390] s390,oprofile: fix compile error for !CONFIG_SMP [S390] s390,oprofile: fix alert counter increment [S390] Remove unused includes in process.c [S390] get CPC image name [S390] sclp: event buffer dissection [S390] chsc: process channel-path-availability information [S390] refactor page table functions for better pgste support [S390] merge page_test_dirty and page_clear_dirty [S390] qdio: prevent compile warning [S390] sclp: remove unnecessary sendmask check [S390] convert old cpumask API into new one [S390] pfault: cleanup code [S390] pfault: cpu hotplug vs missing completion interrupts [S390] smp: add __noreturn attribute to cpu_die() [S390] percpu: implement arch specific irqsafe_cpu_ops [S390] vdso: disable gcov profiling ...
2011-05-24i2c-parport: Various cleanupsJean Delvare3-59/+55
* Fix white space. * Rename labels to something meaningful. * Prefix defines with PORT_ to avoid collision with macros from <linux/parport.h>. * Add const markers where possible. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-24Merge branch 'for-linus' of ↵Linus Torvalds38-359/+2155
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander Input: tsc2007 - add X, Y and Z fuzz factors to platform data Input: tsc2007 - add poll_period parameter to platform data Input: tsc2007 - add poll_delay parameter to platform data Input: tsc2007 - add max_rt parameter to platform data Input: tsc2007 - debounce pressure measurement Input: ad714x - fix captouch wheel option algorithm Input: ad714x - allow platform code to specify irqflags Input: ad714x - fix threshold and completion interrupt masks Input: ad714x - fix up input configuration Input: elantech - remove support for proprietary X driver Input: elantech - report multitouch with proper ABS_MT messages Input: elantech - export pressure and width when supported Input: elantech - describe further the protocol Input: atmel_tsadcc - correct call to input_free_device Input: add driver FSL MPR121 capacitive touch sensor Input: remove useless synchronize_rcu() calls Input: ads7846 - fix gpio_pendown configuration Input: ads7846 - add possibility to use external vref on ads7846 Input: rotary-encoder - add support for half-period encoders ...
2011-05-24i2c-i801: Don't depend on other kernel driver config optionsJean Delvare2-10/+7
Don't let other driver config options influence us, as it makes the code more complex and fragile for a small benefit. There's nothing wrong with instantiating I2C devices even if they don't have a driver. And we're talking about 835 extra bytes in the binary on x86-64, that's hardly worth arguing about. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Woodhouse <david.woodhouse@intel.com> Cc: Hans de Goede <hdegoede@redhat.com>
2011-05-24i2c-i801: Check for vendor Fujitsu before probing for apanelJean Delvare1-1/+2
Scanning the BIOS memory for the apanel information is costly, so avoid doing it on non-Fujitsu machines. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-24i2c-i801: Don't probe for slaves on IDF channelsJean Delvare1-15/+31
I don't know if Fujitsu is ever going to produce Patsburg-based machines, but if they do, I'd rather not probe the secondary (IDF) SMBus channels. At least not until we have a good reason for doing so. On a side note, I'm not even sure if it is right to enable detection of HWMON and DDC devices on the IDF channels. Time will tell... Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-24i2c-i801: SMBus patch for Intel Panther Point DeviceIDsSeth Heasley3-1/+5
This patch adds the SMBus controller DeviceID for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-24i2c/writing-clients: Fix foo_driver.id_tableVikram Narayanan1-1/+1
The i2c_device_id structure variable's name is not used in the i2c_driver structure. Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-24Merge branch 'for-2.6.40' of ↵Linus Torvalds21-52/+60
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: Unify input section names percpu: Avoid extra NOP in percpu_cmpxchg16b_double percpu: Cast away printk format warning percpu: Always align percpu output section to PAGE_SIZE Fix up fairly trivial conflict in arch/x86/include/asm/percpu.h as per Tejun
2011-05-24Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6Linus Torvalds10-129/+132
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: switch to dynamic printks UBI: turn some macros into static inline UBI: improve checking in debugging prints UBI: fix typo in a message UBI: fix minor stylistic issues UBI: use __packed instead of __attribute__((packed)) UBI: cleanup comments around volume properties UBI: re-name set volume properties ioctl UBI: make the control character device non-seekable
2011-05-24Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds26-934/+1117
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (52 commits) UBIFS: switch to dynamic printks UBIFS: fix kernel-doc comments UBIFS: fix extremely rare mount failure UBIFS: simplify LEB recovery function further UBIFS: always cleanup the recovered LEB UBIFS: clean up LEB recovery function UBIFS: fix-up free space on mount if flag is set UBIFS: add the fixup function UBIFS: add a superblock flag for free space fix-up UBIFS: share the next_log_lnum helper UBIFS: expect corruption only in last journal head LEBs UBIFS: synchronize write-buffer before switching to the next bud UBIFS: remove BUG statement UBIFS: change bud replay function conventions UBIFS: substitute the replay tree with a replay list UBIFS: simplify replay UBIFS: store free and dirty space in the bud replay entry UBIFS: remove unnecessary stack variable UBIFS: double check that buds are replied in order UBIFS: make 2 functions static ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 11:47:37 +0300