summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-09-29igc: Remove timeout check from ptp_tx workAndre Guedes1-6/+0
The Tx timestamp timeout is already checked by the watchdog_task which runs periodically. In addition to that, from the ptp_tx work perspective, if __IGC_PTP_TX_IN_PROGRESS flag is set we always want handle the timestamp stored in hardware and update the skb. So remove the timeout check in igc_ptp_tx_work() function. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Don't reschedule ptp_tx workAndre Guedes1-5/+4
The ptp_tx work is scheduled only if TSICR.TXTS bit is set, therefore TSYNCTXCTL.TXTT_0 bit is expected to be set when we check it igc_ptp_tx_ work(). If it isn't, something is really off and rescheduling the ptp_tx work to check it later doesn't help much. This patch changes the code to WARN_ON_ONCE() if this situation ever happens. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Rename IGC_TSYNCTXCTL_VALID macroAndre Guedes2-2/+2
Rename the IGC_TSYNCTXCTL_VALID macro to IGC_TSYNCTXCTL_TXTT_0 so it matches the datasheet. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Add new device ID'sSasha Neftin3-0/+15
Add new device ID's for the next step of the silicon and reflect i221 and i226 parts Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igb: read PBA number from flashGal Hammer1-1/+3
Fixed flash presence check for 82576 controllers so the part number string is read and displayed correctly. Signed-off-by: Gal Hammer <ghammer@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igb: add XDP supportSven Auhagen3-36/+481
Add XDP support to the IGB driver. The implementation follows the IXGBE XDP implementation closely and I used the following patches as basis: 1. commit 924708081629 ("ixgbe: add XDP support for pass and drop actions") 2. commit 33fdc82f0883 ("ixgbe: add support for XDP_TX action") 3. commit ed93a3987128 ("ixgbe: tweak page counting for XDP_REDIRECT") Due to the hardware constraints of the devices using the IGB driver we must share the TX queues with XDP which means locking the TX queue for XDP. I ran tests on an older device to get better numbers. Test machine: Intel(R) Atom(TM) CPU C2338 @ 1.74GHz (2 Cores) 2x Intel I211 Routing Original Driver Network Stack: 382 Kpps Routing XDP Redirect (xdp_fwd_kern): 1.48 Mpps XDP Drop: 1.48 Mpps Using XDP we can achieve line rate forwarding even on an older Intel Atom CPU. Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-28Merge branch 'udp_tunnel-convert-Intel-drivers-with-shared-tables'David S. Miller15-451/+531
Jakub Kicinski says: ==================== udp_tunnel: convert Intel drivers with shared tables This set converts Intel drivers which have the ability to spawn multiple netdevs, but have only one UDP tunnel port table. Appropriate support is added to the core infra in patch 1, followed by netdevsim support and a selftest. The table sharing works by core attaching the same table structure to all devices sharing the table. This means the reference count has to accommodate potentially large values. Once core is ready i40e and ice are converted. These are complex drivers, but we got a tested-by from Aaron, so we should be good :) Compared to v1 I've made sure the selftest is executable. Other than that patches 8 and 9 are actually from the Mellanox conversion series were kept out to avoid Mellanox vs Intel conflicts. Last patch is new, some docs to let users knows ethtool can now display UDP tunnel info. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28docs: vxlan: add info about device featuresJakub Kicinski1-0/+28
Add some information about VxLAN-related netdev features and how to dump port table via ethtool. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28selftests: net: add a test for static UDP tunnel portsJakub Kicinski1-0/+58
Check UDP_TUNNEL_NIC_INFO_STATIC_IANA_VXLAN works as expected. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28netdevsim: support the static IANA VXLAN port flagJakub Kicinski2-0/+5
Allow setting UDP_TUNNEL_NIC_INFO_STATIC_IANA_VXLAN. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28ice: convert to new udp_tunnel infrastructureJakub Kicinski5-206/+135
Convert ice to the new infra, use share port tables. Leave a tiny bit more error checking in place than usual, because this driver really does quite a bit of magic. We need to calculate the number of VxLAN and GENEVE entries the firmware has reserved. Thanks to the conversion the driver will no longer sleep in an atomic section. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28ice: remove unused args from ice_get_open_tunnel_port()Jakub Kicinski4-12/+6
ice_get_open_tunnel_port() is always passed TNL_ALL as the second parameter. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28i40e: convert to new udp_tunnel infrastructureJakub Kicinski2-219/+51
Make use of the "shared port table" to convert i40e to the new infra. i40e did not have any reference tracking, locking is also dodgy because rtnl gets released while talking to FW, so port may get removed from the table while it's getting added etc. On the good side i40e does not seem to be using the ports for TX so we can remove the table from the driver state completely. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28selftests: net: add a test for shared UDP tunnel info tablesJakub Kicinski1-0/+109
Add a test run of checks validating the shared UDP tunnel port tables function as we expect. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28netdevsim: shared UDP tunnel port table supportJakub Kicinski2-2/+22
Add the ability to simulate a device with a shared UDP tunnel port table. Try to reject the configurations and actions which are not supported by the core, so we don't get syzcaller etc. warning reports. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28netdevsim: add warnings on unexpected UDP tunnel port errorsJakub Kicinski1-4/+9
We should never see a removal of a port which is not in the table or adding a port to an occupied entry in the table. To make sure such errors don't escape the checks in the test script add a warning/kernel spat. Error injection will not trigger those, nor should it ever put us in a bad state. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28udp_tunnel: add the ability to share port tablesJakub Kicinski2-10/+110
Unfortunately recent Intel NIC designs share the UDP port table across netdevs. So far the UDP tunnel port state was maintained per netdev, we need to extend that to cater to Intel NICs. Expect NICs to allocate the info structure dynamically and link to the state from there. All the shared NICs will record port offload information in the one instance of the table so we need to make sure that the use count can accommodate larger numbers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28Merge branch 'DP83869-WoL-and-Speed-optimization'David S. Miller1-0/+292
Dan Murphy says: ==================== DP83869 WoL and Speed optimization Add the WoL and Speed Optimization (aka downshift) support for the DP83869 Ethernet PHY. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: phy: dp83869: Add speed optimization featureDan Murphy1-0/+116
Set the speed optimization bit on the DP83869 PHY. Speed optimization, also known as link downshift, enables fallback to 100M operation after multiple consecutive failed attempts at Gigabit link establishment. Such a case could occur if cabling with only four wires (two twisted pairs) were connected instead of the standard cabling with eight wires (four twisted pairs). The number of failed link attempts before falling back to 100M operation is configurable. By default, four failed link attempts are required before falling back to 100M. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: phy: dp83869: support Wake on LANDan Murphy1-0/+176
This adds WoL support on TI DP83869 for magic, magic secure, unicast and broadcast. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: ethernet: ave: Replace alloc_etherdev() with devm_alloc_etherdev()Kunihiko Hayashi1-21/+11
Use devm_alloc_etherdev() to simplify the code instead of alloc_etherdev(). Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: vlan: Fixed signedness in vlan_group_prealloc_vid()Florian Fainelli1-1/+2
After commit d0186842ec5f ("net: vlan: Avoid using BUG() in vlan_proto_idx()"), vlan_proto_idx() was changed to return a signed integer, however one of its called: vlan_group_prealloc_vid() was still using an unsigned integer for its return value, fix that. Fixes: d0186842ec5f ("net: vlan: Avoid using BUG() in vlan_proto_idx()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27Merge branch 'bnxt_en-Update-for-net-next'David S. Miller5-184/+810
Michael Chan says: ==================== bnxt_en: Update for net-next. This patch series adds 2 main features to the bnxt_en driver: 200G link speed support and FEC support with some refactoring of the link speed logic. The firmware interface is updated to have proper support for these 2 features. The ethtool preset max channel value is also adjusted properly to account for XDP and TCs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: Improve preset max value for ethtool -l.Michael Chan1-2/+7
The current logic that calculates the preset maximum value for combined channel does not take into account the rings used for XDP and mqprio TCs. Each of these features will reduce the number of TX rings. Add the logic to divide the TX rings accordingly based on whether the device is currently in XDP mode and whether TCs are in use. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: Implement ethtool set_fec_param() method.Michael Chan3-1/+107
This feature allows the user to set the different FEC modes on the NIC port. Any new setting will take effect immediately after a link toggle. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: Report Active FEC encoding during link up.Michael Chan1-3/+26
The current code is reporting the FEC configured settings during link up. Change it to report the more useful active FEC encoding that may be negotiated or auto detected. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: Report FEC settings to ethtool.Michael Chan3-3/+109
Implement .get_fecparam() method to report the configured and active FEC settings. Also report the supported and advertised FEC settings to the .get_link_ksettings() method. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: avoid link reset if speed is not changedEdwin Peer1-1/+9
PORT_PHY_CONFIG is always sent with REQ_FLAGS_RESET_PHY set. This flag must be set in order for the firmware to institute the requested PHY change immediately, but it results in a link flap. This is unnecessary and results in an improved user experience if the PHY reconfiguration is avoided when the user requested speed does not constitute a change. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: Handle ethernet link being disabled by firmware.Michael Chan2-3/+29
On some 200G dual port NICs, if one port is configured to 200G, firmware will disable the ethernet link on the other port. Firmware will send notification to the driver for the disabled port when this happens. Define a new field in the link_info structure to keep track of this state. The new phy_state field replaces the unused loop_back field. Log a message when the phy_state changes state. In the disabled state, disallow any PHY configurations on the disabled port as the firmware will fail all calls to configure the PHY in this state. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: ethtool: support PAM4 link speeds up to 200GEdwin Peer1-8/+63
Add ethtool PAM4 link modes for: 50000baseCR_Full 100000baseCR2_Full 200000baseCR4_Full Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: add basic infrastructure to support PAM4 link speedsEdwin Peer2-21/+65
The firmware interface has added support for new link speeds using PAM4 modulation. Expand the bnxt_link_info structure to closely mirror the new firmware structures. Add logic to copy the PAM4 capabilities and settings from the firmware. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: refactor bnxt_get_fw_speed()Edwin Peer1-23/+24
It will be necessary to update more than one field in the link_info structure when PAM4 speeds are added in a later patch. Instead of merely translating ethtool speed values to firmware speed values, change the responsiblity of this function to update all the necessary link_info fields required to force the speed change to the desired ethtool value. This also reduces code duplication somewhat at the two call sites, which otherwise both have to independently update link_info fields to turn off auto negotiation advertisements. Also use the appropriate REQ_FORCE_LINK_SPEED definitions. These happen to have the same values, but req_link_speed is utilimately passed as force_link_speed in HWRM_PORT_PHY_CFG which is not defined in terms of REQ_AUTO_LINK_SPEED. Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: refactor code to limit speed advertisingEdwin Peer1-8/+12
Extract the code for determining an advertised speed is no longer supported into a separate function. This will avoid some code duplication in a later patch when supporting PAM4 speeds, since these speeds are specified in a separate field. Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: Update firmware interface spec to 1.10.1.65.Michael Chan5-113/+361
The main changes include FEC, ECN statistics, HWRM_PORT_PHY_QCFG response size reduction, and a new counter added to ctx_hw_stats_ext struct to support the new 58818 chip. The ctx_hw_stats_ext structure is now the superset supporting the new 58818 chips and the prior P5 chips. Add a new flag to identify the new chip and use constants for the chip specific ring statistics sizes instead of the size of the structure. Because the HWRM_PORT_PHY_QCFG response structure size has shrunk back to 96 bytes, the workaround added earlier to limit the size of this message for forwarding to the VF can be removed. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27ptp: add stub function for ptp_get_msgtype()Yangbo Lu1-0/+8
Added the missing stub function for ptp_get_msgtype(). Fixes: 036c508ba95e ("ptp: Add generic ptp message type function") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: marvell: mvpp2: Fix W=1 warning with !CONFIG_ACPIAndrew Lunn1-0/+2
rivers/net/ethernet/marvell/mvpp2/mvpp2_main.c:7084:36: warning: ‘mvpp2_acpi_match’ defined but not used [-Wunused-const-variable=] 7084 | static const struct acpi_device_id mvpp2_acpi_match[] = { | ^~~~~~~~~~~~~~~~ Wrap the definition inside #ifdef/#endif. Compile tested only. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27Merge branch 'mlxsw-Expose-transceiver-overheat-counter'David S. Miller10-5/+660
Ido Schimmel says: ==================== mlxsw: Expose transceiver overheat counter Amit says: An overheated transceiver can be the root cause of various network problems such as link flapping. Counting the number of times a transceiver's temperature was higher than its configured threshold can therefore help in debugging such issues. This patch set exposes a transceiver overheat counter via ethtool. This is achieved by configuring the Spectrum ASIC to generate events whenever a transceiver is overheated. The temperature thresholds are queried from the transceiver (if available) and set to the default otherwise. Example: ... transceiver_overheat: 2 Patch set overview: Patches #1-#3 add required device registers Patches #4-#5 add required infrastructure in mlxsw to configure and count overheat events Patches #6-#9 gradually add support for the transceiver overheat counter Patch #10 exposes the transceiver overheat counter via ethtool ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: spectrum_ethtool: Expose transceiver_overheat counterAmit Cohen1-1/+56
Add structures for port statistics which read from core and not directly from registers. When netdev's ethtool statistics are queried, query the corresponding module's overheat counter from core and expose it as "transceiver_overheat". Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: Update module's settings when module is plugged inAmit Cohen4-0/+137
Module temperature warning events are enabled for modules that have a temperature sensor and configured according to the temperature thresholds queried from the module. When a module is unplugged we are guaranteed not to get temperature warning events. However, when a module is plugged in we need to potentially update its current settings (i.e., event enablement and thresholds). Register to port module plug/unplug events and update module's settings upon plug in events. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: spectrum: Initialize netdev's module overheat counterAmit Cohen2-0/+26
The overheat counter is a per-module counter, but it is exposed as part of the corresponding netdev's statistics. It should therefore be presented to user space relative to the netdev's lifetime. Query the counter just before registering the netdev, so that the value exposed to user space will be relative to this initial value. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: Enable temperature event for all supported port module sensorsAmit Cohen2-0/+107
MTWE (Management Temperature Warning Event) is triggered for sensors whose temperature event enable bit is enabled in the MTMP register. Enable events for all the modules that have a temperature sensor. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: Update transceiver_overheat counter according to MTWEAmit Cohen6-0/+99
MTWE (Management Temperature Warning Event) is triggered when module's temperature is higher than its threshold. Register for MTWE events and increase the module's overheat counter when its corresponding sensor goes above the configured threshold. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: core: Add an infrastructure to track transceiver overheat counterAmit Cohen4-0/+96
Initialize an array that stores per-module overheat state and a counter indicating how many times the module was in overheat state. Export a function to query the counter according to module number. Will be used later on by the switch driver (i.e., mlxsw_spectrum) to expose module's overheat counter as part of ethtool statistics. Initialize mlxsw_env after driver initialization to be able to query number of modules from MGPIR register. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: core_hwmon: Query MTMP before writing to set only relevant fieldsAmit Cohen1-4/+17
The MTMP register controls various temperature settings on a per-sensor basis. Subsequent patches are going to alter some of these settings for sensors found on port modules in response to certain events. In order to prevent the current callers that write to MTMP from overriding these settings, have them first query the register and then change only the relevant register fields. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: reg: Add Ports Module Administrative and Operational Status RegisterAmit Cohen1-0/+59
PMAOS register configures and retrieves the per module status. The register is used also for enabling event for status change. It will be used to enable PMPE (Port Module Plug/Unplug) event. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: reg: Add Port Module Plug/Unplug Event RegisterAmit Cohen1-0/+45
PMPE register reports any operational status change of a module. It will be used for enabling temperature warning event when a module is plugged in. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27mlxsw: reg: Add Management Temperature Warning Event RegisterAmit Cohen1-0/+18
Add MTWE (Management Temperature Warning Event) register, which is used for over temperature warning. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27Merge branch 'hns3-next'David S. Miller13-138/+548
Huazhong Tan says: ==================== net: hns3: updates for -next To facilitate code maintenance and compatibility, #1 and #2 add device version to replace pci revision, #3 to #9 adds support for querying device capabilities and specifications, then the driver can use these query results to implement corresponding features (some features will be implemented later). And #10 is a minor cleanup since too many parameters for hclge_shaper_para_calc(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: hns3: add a structure for IR shaper's parameter in hclge_shaper_para_calc()Huazhong Tan2-44/+49
As function hclge_shaper_para_calc() has too many arguments to add more, so encapsulate its three arguments ir_b, ir_u, ir_s into a structure. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: hns3: add a check for device specifications queried from firmwareGuangbin Huang2-0/+28
The device specifications querying is unsupported by the old firmware, in this case, these specifications are 0. However, some specifications should not be 0 or will cause problem. So after querying from firmware, some device specifications are needed to check their value and set to default value if their values are 0. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 20:47:32 +0300