summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-04-23Merge branch 'Simplify bpf_snprintf verifier code'Alexei Starovoitov1-4/+5
Florent Revest says: ==================== Alexei requested a couple of cleanups to the bpf_snprintf and ARG_PTR_TO_CONST_STR verifier code. https://lore.kernel.org/bpf/CABRcYmL_SMT80UTyV98bRsOzW0wBd1sZcYUpTrcOAV+9m+YoWQ@mail.gmail.com/T/#t ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-04-23bpf: Remove unnecessary map checks for ARG_PTR_TO_CONST_STRFlorent Revest1-2/+1
reg->type is enforced by check_reg_type() and map should never be NULL (it would already have been dereferenced anyway) so these checks are unnecessary. Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210422235543.4007694-3-revest@chromium.org
2021-04-23bpf: Notify user if we ever hit a bpf_snprintf verifier bugFlorent Revest1-2/+4
In check_bpf_snprintf_call(), a map_direct_value_addr() of the fmt map should never fail because it has already been checked by ARG_PTR_TO_CONST_STR. But if it ever fails, it's better to error out with an explicit debug message rather than silently fail. Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210422235543.4007694-2-revest@chromium.org
2021-04-23Merge branch 'md-next' of ↵Jens Axboe2-4/+6
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.13/drivers Pull MD fixes from Song. * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid1: properly indicate failure when ending a failed write request md-cluster: fix use-after-free issue when removing rdev
2021-04-23dt-bindings: pwm: Add bindings for Toshiba Visconti PWM ControllerNobuhiro Iwamatsu1-0/+43
Add bindings for the Toshiba Visconti PWM Controller. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23arm64: dts: rockchip: Remove clock-names from PWM nodesJohan Jonker2-8/+0
A test with the command below gives this error: /arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dt.yaml: pwm@ff680030: clock-names: ['pwm'] is too short Devices with only one PWM clock use it to both to derive the functional clock for the device and as the bus clock. The driver does not need "clock-names" to get a handle, so remove them all. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23ARM: dts: rockchip: Remove clock-names from PWM nodesJohan Jonker2-8/+0
A test with the command below gives this error: /arch/arm/boot/dts/rk3036-evb.dt.yaml: pwm@20050030: clock-names: ['pwm'] is too short Devices with only one PWM clock use it to both to derive the functional clock for the device and as the bus clock. The driver does not need "clock-names" to get a handle, so remove them all. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23dt-bindings: pwm: rockchip: Add more compatible stringsJohan Jonker1-0/+12
The compatible strings below are already in use in the Rockchip DTSI files, but were somehow never added to a document, so add "rockchip,rk3328-pwm" "rockchip,rk3036-pwm", "rockchip,rk2928-pwm" "rockchip,rk3368-pwm", "rockchip,rk3288-pwm" "rockchip,rk3399-pwm", "rockchip,rk3288-pwm" "rockchip,px30-pwm", "rockchip,rk3328-pwm" "rockchip,rk3308-pwm", "rockchip,rk3328-pwm" for PWM nodes to pwm-rockchip.yaml. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23dt-bindings: pwm: Convert pwm-rockchip.txt to YAMLJohan Jonker2-27/+88
Current dts files with 'pwm' nodes are manually verified. In order to automate this process pwm-rockchip.txt has to be converted to YAML. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23pwm: mediatek: Remove unused functionJiapeng Chong1-6/+0
Fix the following clang warning: drivers/pwm/pwm-mediatek.c:110:19: warning: unused function 'pwm_mediatek_readl' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23pwm: pca9685: Improve runtime PM behaviorClemens Gruber1-6/+19
The chip does not come out of POR in active state but in sleep state. To be sure (in case the bootloader woke it up) we force it to sleep in probe. If runtime PM is disabled, we instead wake the chip in .probe and put it to sleep in .remove. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23pwm: pca9685: Support hardware readoutClemens Gruber1-0/+36
Implement .get_state to read-out the current hardware state. The hardware readout may return slightly different values than those that were set in apply due to the limited range of possible prescale and counter register values. Also note that although the datasheet mentions 200 Hz as default frequency when using the internal 25 MHz oscillator, the calculated period from the default prescaler register setting of 30 is 5079040ns. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23pwm: pca9685: Switch to atomic APIClemens Gruber1-170/+91
The switch to the atomic API goes hand in hand with a few fixes to previously experienced issues: - The duty cycle is no longer lost after disable/enable (previously the OFF registers were cleared in disable and the user was required to call config to restore the duty cycle settings) - If one sets a period resulting in the same prescale register value, the sleep and write to the register is now skipped - Previously, only the full ON bit was toggled in GPIO mode (and full OFF cleared if set to high), which could result in both full OFF and full ON not being set and on=0, off=0, which is not allowed according to the datasheet - The OFF registers were reset to 0 in probe, which could lead to the forbidden on=0, off=0. Fixed by resetting to POR default (full OFF) Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-04-23md/raid1: properly indicate failure when ending a failed write requestPaul Clements1-0/+2
This patch addresses a data corruption bug in raid1 arrays using bitmaps. Without this fix, the bitmap bits for the failed I/O end up being cleared. Since we are in the failure leg of raid1_end_write_request, the request either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded). Fixes: eeba6809d8d5 ("md/raid1: end bio when the device faulty") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Paul Clements <paul.clements@us.sios.com> Signed-off-by: Song Liu <song@kernel.org>
2021-04-23md-cluster: fix use-after-free issue when removing rdevHeming Zhao1-4/+4
md_kick_rdev_from_array will remove rdev, so we should use rdev_for_each_safe to search list. How to trigger: env: Two nodes on kvm-qemu x86_64 VMs (2C2G with 2 iscsi luns). ``` node2=192.168.0.3 for i in {1..20}; do echo ==== $i `date` ====; mdadm -Ss && ssh ${node2} "mdadm -Ss" wipefs -a /dev/sda /dev/sdb mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l 1 /dev/sda \ /dev/sdb --assume-clean ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb" mdadm --wait /dev/md0 ssh ${node2} "mdadm --wait /dev/md0" mdadm --manage /dev/md0 --fail /dev/sda --remove /dev/sda sleep 1 done ``` Crash stack: ``` stack segment: 0000 [#1] SMP ... ... RIP: 0010:md_check_recovery+0x1e8/0x570 [md_mod] ... ... RSP: 0018:ffffb149807a7d68 EFLAGS: 00010207 RAX: 0000000000000000 RBX: ffff9d494c180800 RCX: ffff9d490fc01e50 RDX: fffff047c0ed8308 RSI: 0000000000000246 RDI: 0000000000000246 RBP: 6b6b6b6b6b6b6b6b R08: ffff9d490fc01e40 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff9d494c180818 R14: ffff9d493399ef38 R15: ffff9d4933a1d800 FS: 0000000000000000(0000) GS:ffff9d494f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe68cab9010 CR3: 000000004c6be001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: raid1d+0x5c/0xd40 [raid1] ? finish_task_switch+0x75/0x2a0 ? lock_timer_base+0x67/0x80 ? try_to_del_timer_sync+0x4d/0x80 ? del_timer_sync+0x41/0x50 ? schedule_timeout+0x254/0x2d0 ? md_start_sync+0xe0/0xe0 [md_mod] ? md_thread+0x127/0x160 [md_mod] md_thread+0x127/0x160 [md_mod] ? wait_woken+0x80/0x80 kthread+0x10d/0x130 ? kthread_park+0xa0/0xa0 ret_from_fork+0x1f/0x40 ``` Fixes: dbb64f8635f5d ("md-cluster: Fix adding of new disk with new reload code") Fixes: 659b254fa7392 ("md-cluster: remove a disk asynchronously from cluster environment") Cc: stable@vger.kernel.org Reviewed-by: Gang He <ghe@suse.com> Signed-off-by: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Song Liu <song@kernel.org>
2021-04-23iavf: redefine the magic number for FDIR GTP-U header fieldsHaiyue Wang1-3/+12
The flex-byte for GTP-U protocol header fields uses the magic number, which is hard to maintain and understand, define the interested fields with meaningful macro name, based on the GTP-U protocol stack: GTP-U header +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | 0x1 |1|0|1|0|0| 0xff | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | TEID = 1654 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Sequence Number = 0 |N-PDU Number=0 |NextExtHdr=0x85| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ GTP-U Extension Header (PDU Session Container) +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ExtHdrLen=2 |Type=0 | Spare |0|0| QFI | PPI | Spare | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Padding |NextExtHdr=0x0 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23iavf: enhance the duplicated FDIR list scan handlingHaiyue Wang1-6/+3
When the FDIR entry is found, just return the result directly to break the loop. Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23iavf: change the flex-byte support number to macro definitionHaiyue Wang2-3/+8
The maximum number (2) of flex-byte support is derived from ethtool use-def data size (8 byte). Change the magic number 2 to macro definition, and add the comment to track the design thinking, so the code is clear and easily maintained. Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23iavf: remove duplicate free resources callsStefan Assmann1-2/+0
Both iavf_free_all_tx_resources() and iavf_free_all_rx_resources() have already been called in the very same function. Remove the duplicate calls. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: use minimal admin queue for kdumpCoiby Xu2-2/+9
The minimum size of admin send/receive queue is 1 and 2 respectively. The admin send queue can't be set to 1 because in that case, the firmware would fail to init. Signed-off-by: Coiby Xu <coxu@redhat.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: use minimal Rx and Tx ring buffers for kdumpCoiby Xu1-0/+5
Use the minimum of the number of descriptors thus we will allocate the minimal ring buffers for kdump. Signed-off-by: Coiby Xu <coxu@redhat.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: use minimal Tx and Rx pairs for kdumpCoiby Xu1-0/+9
Set the number of the MSI-X vectors to 1. When MSI-X is enabled, it's not allowed to use more TC queue pairs than MSI-X vectors (pf->num_lan_msix) exist. Thus the number of Tx and Rx pairs (vsi->num_queue_pairs) will be equal to the number of MSI-X vectors, i.e., 1. Signed-off-by: Coiby Xu <coxu@redhat.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: refactor repeated link state reporting codeAleksandr Loktionov1-39/+69
Refactor repeated link state reporting code into a separate helper functions: i40e_set_vf_link_state() i40e_vc_link_speed2mbps(). Add support of VIRTCHNL_VF_CAP_ADV_LINK_SPEED; Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23lib/vsprintf.c: remove leftover 'f' and 'F' cases from bstr_printf()Rasmus Villemoes1-2/+0
Commit 9af7706492f9 ("lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps") removed support for %pF and %pf, and correctly removed the handling of those cases in vbin_printf(). However, the corresponding cases in bstr_printf() were left behind. In the same series, %pf was re-purposed for dealing with fwnodes (3bd32d6a2ee6, "lib/vsprintf: Add %pfw conversion specifier for printing fwnode names"). So should anyone use %pf with the binary printf routines, vbin_printf() would (correctly, as it involves dereferencing the pointer) do the string formatting to the u32 array, but bstr_printf() would not copy the string from the u32 array, but instead interpret the first sizeof(void*) bytes of the formatted string as a pointer - which generally won't end well (also, all subsequent get_args would be out of sync). Fixes: 9af7706492f9 ("lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps") Cc: stable@vger.kernel.org Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210423094529.1862521-1-linux@rasmusvillemoes.dk
2021-04-23SUNRPC: Fix null pointer dereference in svc_rqst_free()Yunjian Wang1-1/+2
When alloc_pages_node() returns null in svc_rqst_alloc(), the null rq_scratch_page pointer will be dereferenced when calling put_page() in svc_rqst_free(). Fix it by adding a null check. Addresses-Coverity: ("Dereference after null check") Fixes: 5191955d6fc6 ("SUNRPC: Prepare for xdr_stream-style decoding on the server-side") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-04-23spi: Rename enable1 to activate in spi_set_cs()Andy Shevchenko1-5/+4
The enable1 is confusing name. Change it to clearly show what is the intention behind it. No functional changes. Fixes: 25093bdeb6bc ("spi: implement SW control for CS times") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210420131846.75983-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23regulator: Add binding for TCS4525Ezequiel Garcia1-2/+2
Add a compatible string to support TCS4525/TCS4526 devices, which are compatible with Fairchild FAN53555 regulators. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Link: https://lore.kernel.org/r/20210421210338.43819-2-ezequiel@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23regulator: fan53555: Add TCS4525 DCDC supportJoseph Chen1-14/+122
TCS4525 main features: - 2.7V to 5.5V Input Voltage Range; - 3MHz Constant Switching Frequency; - 5A Available Load Current; - Programmable Output Voltage: 0.6V to 1.4V in 6.25mV Steps; - PFM/PWM Operation for Optimum Increased Efficiency; Signed-off-by: Joseph Chen <chenjh@rock-chips.com> [Ezequiel: Forward port] Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Link: https://lore.kernel.org/r/20210421210338.43819-3-ezequiel@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23dt-bindings: vendor-prefixes: Add Tang Cheng (TCS)Ezequiel Garcia1-0/+2
Shenzhen City Tang Cheng Technology (http://www.tctek.cn/) is a power management IC manufacturer. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Link: https://lore.kernel.org/r/20210421210338.43819-1-ezequiel@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23ASoC: rt711-sdca: add the notification when volume changedShuming Fan1-2/+11
This patch adds the return value when the volume settings were changed. The userspace application might monitor the kcontrols to check which control changed. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20210422103235.22048-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23ASoC: rt711-sdca: change capture switch controlsShuming Fan2-43/+127
The DAPM event and mixer control could mute/unmute the capture directly. That will be confused that capture still works if the user settings is unmute before the capture. Therefore, this patch uses the variables to record the capture switch status of DAPM and mixer. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20210422103220.21987-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23io_uring: check sqring and iopoll_list before sheduleHao Xu1-17/+19
do this to avoid race below: userspace kernel | check sqring and iopoll_list submit sqe | check IORING_SQ_NEED_WAKEUP | (which is not set) | | | set IORING_SQ_NEED_WAKEUP wait cqe | schedule(never wakeup again) Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> Link: https://lore.kernel.org/r/1619018351-75883-1-git-send-email-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-23Merge branch 'tegra/dt64' into arm/fixesArnd Bergmann7-5/+13
arm64: tegra: Device tree fixes for v5.12-rc6 This contains a couple of device tree fixes for the v5.12 release cycle. These are needed for proper audio support on Jetson AGX Xavier, to boot the Jetson Xavier NX from an SD card and to be able to suspend/resume the Jetson TX2. * tegra/dt64: arm64: tegra: Move clocks from RT5658 endpoint to device node arm64: tegra: Fix mmc0 alias for Jetson Xavier NX arm64: tegra: Set fw_devlink=on for Jetson TX2 arm64: tegra: Add unit-address for ACONNECT on Tegra186 Link: https://lore.kernel.org/linux-arm-kernel/YILD4yyPXuiYbHW1@orome.fritz.box/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-23arm64: remove HAVE_DEBUG_BUGVERBOSEJisheng Zhang1-1/+0
After commit 9fb7410f955f ("arm64/BUG: Use BRK instruction for generic BUG traps"), arm64 has switched to generic BUG implementation, so there's no need to select HAVE_DEBUG_BUGVERBOSE. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210418215231.563d4b72@xhacker Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-23arm64: alternative: simplify passing alt_regionMark Rutland1-2/+1
In __apply_alternatives() we take a pointer to void which we later assign to a pointer to struct alt_region. As all callers are passing a pointer to struct alt_region to begin with, it's simpler and more robust to take a pointer to struct alt region, so let's do so and avoid the need for a temporary variable. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210416163032.10857-1-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-23arm64: Force SPARSEMEM_VMEMMAP as the only memory management modelCatalin Marinas7-25/+6
Currently arm64 allows a choice of FLATMEM, SPARSEMEM and SPARSEMEM_VMEMMAP. However, only the latter is tested regularly. FLATMEM does not seem to boot in certain configurations (guest under KVM with Qemu as a VMM). Since the reduction of the SECTION_SIZE_BITS to 27 (4K pages) or 29 (64K page), there's little argument against the memory wasted by the mem_map array with SPARSEMEM. Make SPARSEMEM_VMEMMAP the only available option, non-selectable, and remove the corresponding #ifdefs under arch/arm64/. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/r/20210420093559.23168-1-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-23arm64: vdso32: drop -no-integrated-as flagNick Desaulniers1-8/+0
Clang can assemble these files just fine; this is a relic from the top level Makefile conditionally adding this. We no longer need --prefix, --gcc-toolchain, or -Qunused-arguments flags either with this change, so remove those too. To test building: $ ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- \ CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make LLVM=1 LLVM_IAS=1 \ defconfig arch/arm64/kernel/vdso32/ Suggested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Tested-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210420174427.230228-1-ndesaulniers@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-23drm/ttm: fix error handling if no BO can be swapped out v4Shiwu Zhang3-2/+4
In case that all pre-allocated BOs are busy, just continue to populate BOs since likely half of system memory in total is still free. v4 (chk): fix code moved to VMWGFX as well Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210422115757.3946-1-christian.koenig@amd.com
2021-04-23irqchip/gic-v3: Do not enable irqs when handling spurious interrupsHe Ying1-4/+4
We triggered the following error while running our 4.19 kernel with the pseudo-NMI patches backported to it: [ 14.816231] ------------[ cut here ]------------ [ 14.816231] kernel BUG at irq.c:99! [ 14.816232] Internal error: Oops - BUG: 0 [#1] SMP [ 14.816232] Process swapper/0 (pid: 0, stack limit = 0x(____ptrval____)) [ 14.816233] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.19.95.aarch64 #14 [ 14.816233] Hardware name: evb (DT) [ 14.816234] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 14.816234] pc : asm_nmi_enter+0x94/0x98 [ 14.816235] lr : asm_nmi_enter+0x18/0x98 [ 14.816235] sp : ffff000008003c50 [ 14.816235] pmr_save: 00000070 [ 14.816237] x29: ffff000008003c50 x28: ffff0000095f56c0 [ 14.816238] x27: 0000000000000000 x26: ffff000008004000 [ 14.816239] x25: 00000000015e0000 x24: ffff8008fb916000 [ 14.816240] x23: 0000000020400005 x22: ffff0000080817cc [ 14.816241] x21: ffff000008003da0 x20: 0000000000000060 [ 14.816242] x19: 00000000000003ff x18: ffffffffffffffff [ 14.816243] x17: 0000000000000008 x16: 003d090000000000 [ 14.816244] x15: ffff0000095ea6c8 x14: ffff8008fff5ab40 [ 14.816244] x13: ffff8008fff58b9d x12: 0000000000000000 [ 14.816245] x11: ffff000008c8a200 x10: 000000008e31fca5 [ 14.816246] x9 : ffff000008c8a208 x8 : 000000000000000f [ 14.816247] x7 : 0000000000000004 x6 : ffff8008fff58b9e [ 14.816248] x5 : 0000000000000000 x4 : 0000000080000000 [ 14.816249] x3 : 0000000000000000 x2 : 0000000080000000 [ 14.816250] x1 : 0000000000120000 x0 : ffff0000095f56c0 [ 14.816251] Call trace: [ 14.816251] asm_nmi_enter+0x94/0x98 [ 14.816251] el1_irq+0x8c/0x180 (IRQ C) [ 14.816252] gic_handle_irq+0xbc/0x2e4 [ 14.816252] el1_irq+0xcc/0x180 (IRQ B) [ 14.816253] arch_timer_handler_virt+0x38/0x58 [ 14.816253] handle_percpu_devid_irq+0x90/0x240 [ 14.816253] generic_handle_irq+0x34/0x50 [ 14.816254] __handle_domain_irq+0x68/0xc0 [ 14.816254] gic_handle_irq+0xf8/0x2e4 [ 14.816255] el1_irq+0xcc/0x180 (IRQ A) [ 14.816255] arch_cpu_idle+0x34/0x1c8 [ 14.816255] default_idle_call+0x24/0x44 [ 14.816256] do_idle+0x1d0/0x2c8 [ 14.816256] cpu_startup_entry+0x28/0x30 [ 14.816256] rest_init+0xb8/0xc8 [ 14.816257] start_kernel+0x4c8/0x4f4 [ 14.816257] Code: 940587f1 d5384100 b9401001 36a7fd01 (d4210000) [ 14.816258] Modules linked in: start_dp(O) smeth(O) [ 15.103092] ---[ end trace 701753956cb14aa8 ]--- [ 15.103093] Kernel panic - not syncing: Fatal exception in interrupt [ 15.103099] SMP: stopping secondary CPUs [ 15.103100] Kernel Offset: disabled [ 15.103100] CPU features: 0x36,a2400218 [ 15.103100] Memory Limit: none which is cause by a 'BUG_ON(in_nmi())' in nmi_enter(). From the call trace, we can find three interrupts (noted A, B, C above): interrupt (A) is preempted by (B), which is further interrupted by (C). Subsequent investigations show that (B) results in nmi_enter() being called, but that it actually is a spurious interrupt. Furthermore, interrupts are reenabled in the context of (B), and (C) fires with NMI priority. We end-up with a nested NMI situation, something we definitely do not want to (and cannot) handle. The bug here is that spurious interrupts should never result in any state change, and we should just return to the interrupted context. Moving the handling of spurious interrupts as early as possible in the GICv3 handler fixes this issue. Fixes: 3f1f3234bc2d ("irqchip/gic-v3: Switch to PMR masking before calling IRQ handler") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: He Ying <heying24@huawei.com> [maz: rewrote commit message, corrected Fixes: tag] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210423083516.170111-1-heying24@huawei.com Cc: stable@vger.kernel.org
2021-04-23spi: Convert Freescale QSPI binding to json schemaKuldeep Singh3-66/+97
Convert the Freescale QSPI binding to DT schema format using json-schema. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210312054038.3586706-1-kuldeep.singh@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23regulator: core: Fix off_on_delay handlingVincent Whitchurch2-26/+9
The jiffies-based off_on_delay implementation has a couple of problems that cause it to sometimes not actually delay for the required time: (1) If, for example, the off_on_delay time is equivalent to one jiffy, and the ->last_off_jiffy is set just before a new jiffy starts, then _regulator_do_enable() does not wait at all since it checks using time_before(). (2) When jiffies overflows, the value of "remaining" becomes higher than "max_delay" and the code simply proceeds without waiting. Fix these problems by changing it to use ktime_t instead. [Note that since jiffies doesn't start at zero but at INITIAL_JIFFIES ("-5 minutes"), (2) above also led to the code not delaying if the first regulator_enable() is called when the ->last_off_jiffy is not initialised, such as for regulators with ->constraints->boot_on set. It's not clear to me if this was intended or not, but I've preserved this behaviour explicitly with the check for a non-zero ->last_off.] Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20210423114524.26414-1-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23Merge branch 'for-5.12' of ↵Mark Brown4-32/+71
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-5.13
2021-04-23ASoC: da7219: properly get clk from the providerJerome Brunet1-1/+4
Instead of using the clk embedded in the clk_hw (which is meant to go away), a clock provider which need to interact with its own clock should request clk reference through the clock provider API. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210421120512.413057-6-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23ASoC: lpass: use the clock provider APIJerome Brunet2-13/+5
Clock providers should be registered using the clk_hw API. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210421120512.413057-5-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23ASoC: rt5682: clock driver must use the clock provider APIJerome Brunet1-3/+3
Clock drivers ops should not call the clk API but the clock provider (clk_hw) instead. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210421120512.413057-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23ASoC: wcd934x: use the clock provider APIJerome Brunet1-2/+4
Clock providers should use the clk_hw API Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210421120512.413057-3-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23ASoC: stm32: properly get clk from the providerJerome Brunet1-1/+4
Instead of using the clk embedded in the clk_hw (which is meant to go away), a clock provider which need to interact with its own clock should request clk reference through the clock provider API. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210421120512.413057-2-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-23MIPS: select ARCH_KEEP_MEMBLOCK unconditionallyNick Desaulniers1-1/+1
While removing allnoconfig_y from Kconfig, ARCH=mips allnoconfig builds started failing with the error: WARNING: modpost: vmlinux.o(.text+0x9c70): Section mismatch in reference from the function reserve_exception_space() to the function .meminit.text:memblock_reserve() The function reserve_exception_space() references the function __meminit memblock_reserve(). This is often because reserve_exception_space lacks a __meminit annotation or the annotation of memblock_reserve is wrong. ERROR: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. allnoconfig disables DEBUG_KERNEL and thus ARCH_KEEP_MEMBLOCK, which changes __init_memblock to be equivalent to __meminit triggering the above error. Link: https://lore.kernel.org/linux-kbuild/20210313194836.372585-11-masahiroy@kernel.org/ Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-23KVM: x86: Fix implicit enum conversion goof in scattered reverse CPUID codeSean Christopherson2-3/+4
Take "enum kvm_only_cpuid_leafs" in scattered specific CPUID helpers (which is obvious in hindsight), and use "unsigned int" for leafs that can be the kernel's standard "enum cpuid_leaf" or the aforementioned KVM-only variant. Loss of the enum params is a bit disapponting, but gcc obviously isn't providing any extra sanity checks, and the various BUILD_BUG_ON() assertions ensure the input is in range. This fixes implicit enum conversions that are detected by clang-11: arch/x86/kvm/cpuid.c:499:29: warning: implicit conversion from enumeration type 'enum kvm_only_cpuid_leafs' to different enumeration type 'enum cpuid_leafs' [-Wenum-conversion] kvm_cpu_cap_init_scattered(CPUID_12_EAX, ~~~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~ arch/x86/kvm/cpuid.c:837:31: warning: implicit conversion from enumeration type 'enum kvm_only_cpuid_leafs' to different enumeration type 'enum cpuid_leafs' [-Wenum-conversion] cpuid_entry_override(entry, CPUID_12_EAX); ~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~ 2 warnings generated. Fixes: 4e66c0cb79b7 ("KVM: x86: Add support for reverse CPUID lookup of scattered features") Cc: Kai Huang <kai.huang@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210421010850.3009718-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-23KVM: VMX: use EPT_VIOLATION_GVA_TRANSLATED instead of 0x100Isaku Yamahata1-1/+1
Use symbolic value, EPT_VIOLATION_GVA_TRANSLATED, instead of 0x100 in handle_ept_violation(). Signed-off-by: Yao Yuan <yuan.yao@intel.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <724e8271ea301aece3eb2afe286a9e2e92a70b18.1619136576.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-17 21:36:06 +0300