summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-01-14arch/openrisc/setup: Drop dummy_con initializationArvind Sankar1-5/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-16-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14arch/nios2/setup: Drop dummy_con initializationArvind Sankar1-4/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-15-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14arch/nds32/setup: Drop dummy_con initializationArvind Sankar1-5/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-14-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14arch/mips/setup: Drop dummy_con initializationArvind Sankar1-2/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-13-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14arch/microblaze/setup: Drop dummy_con initializationArvind Sankar1-4/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-12-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14arch/m68k/setup: Drop dummy_con initializationArvind Sankar3-9/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-11-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14arch/ia64/setup: Drop dummy_con initializationArvind Sankar1-3/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-10-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14arch/csky/setup: Drop dummy_con initializationArvind Sankar1-4/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-9-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14arch/arm64/setup: Drop dummy_con initializationArvind Sankar1-3/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-7-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14arch/arm/setup: Drop dummy_con initializationArvind Sankar1-2/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-6-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14arch/arc/setup: Drop dummy_con initializationArvind Sankar1-4/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-5-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14arch/alpha/setup: Drop dummy_con initializationArvind Sankar1-2/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-4-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14vt: Initialize conswitchp to dummy_con if unsetArvind Sankar1-2/+3
If the arch setup code hasn't initialized conswitchp yet, set it to dummy_con in con_init. This will allow us to drop the dummy_con initialization that's done in almost every architecture. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-3-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14console/dummycon: Remove bogus depends on from DUMMY_CONSOLEArvind Sankar1-1/+0
Since commit [1] consolidated console configuration in drivers/video/console, DUMMY_CONSOLE has always been enabled, since the dependency is always satisfied. There is no point in trying to allow it to be configured out, since (a) it's tiny, and (b) if VT_CONSOLE is enabled, we must have a working console driver by the time con_init(vt.c) runs, and only dummycon is guaranteed to work (vgacon may be configured in, but that doesn't mean we have a VGA device). So just remove the fake dependency. [1] https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit?id=31d2a7d36d6989c714b792ec00358ada24c039e7 Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-2-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14tty: synclink_gt: Adjust indentation in several functionsNathan Chancellor1-9/+9
Clang warns: ../drivers/tty/synclink_gt.c:1337:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (C_CRTSCTS(tty)) { ^ ../drivers/tty/synclink_gt.c:1335:2: note: previous statement is here if (I_IXOFF(tty)) ^ ../drivers/tty/synclink_gt.c:2563:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) ^ ../drivers/tty/synclink_gt.c:2561:2: note: previous statement is here if (I_INPCK(info->port.tty)) ^ ../drivers/tty/synclink_gt.c:3221:3: warning: misleading indentation; statement is not part of the previous 'else' [-Wmisleading-indentation] set_signals(info); ^ ../drivers/tty/synclink_gt.c:3219:2: note: previous statement is here else ^ 3 warnings generated. The indentation on these lines is not at all consistent, tabs and spaces are mixed together. Convert to just using tabs to be consistent with the Linux kernel coding style and eliminate these warnings from clang. Link: https://github.com/ClangBuiltLinux/linux/issues/822 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20191218023912.13827-1-natechancellor@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14tty: synclinkmp: Adjust indentation in several functionsNathan Chancellor1-12/+12
Clang warns: ../drivers/tty/synclinkmp.c:1456:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (C_CRTSCTS(tty)) { ^ ../drivers/tty/synclinkmp.c:1453:2: note: previous statement is here if (I_IXOFF(tty)) ^ ../drivers/tty/synclinkmp.c:2473:8: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] info->port.tty->hw_stopped = 0; ^ ../drivers/tty/synclinkmp.c:2471:7: note: previous statement is here if ( debug_level >= DEBUG_LEVEL_ISR ) ^ ../drivers/tty/synclinkmp.c:2482:8: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] info->port.tty->hw_stopped = 1; ^ ../drivers/tty/synclinkmp.c:2480:7: note: previous statement is here if ( debug_level >= DEBUG_LEVEL_ISR ) ^ ../drivers/tty/synclinkmp.c:2809:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) ^ ../drivers/tty/synclinkmp.c:2807:2: note: previous statement is here if (I_INPCK(info->port.tty)) ^ ../drivers/tty/synclinkmp.c:3246:3: warning: misleading indentation; statement is not part of the previous 'else' [-Wmisleading-indentation] set_signals(info); ^ ../drivers/tty/synclinkmp.c:3244:2: note: previous statement is here else ^ 5 warnings generated. The indentation on these lines is not at all consistent, tabs and spaces are mixed together. Convert to just using tabs to be consistent with the Linux kernel coding style and eliminate these warnings from clang. Link: https://github.com/ClangBuiltLinux/linux/issues/823 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20191218024720.3528-1-natechancellor@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14ttyprintk: fix a potential deadlock in interrupt context issueZhenzhong Duan1-6/+9
tpk_write()/tpk_close() could be interrupted when holding a mutex, then in timer handler tpk_write() may be called again trying to acquire same mutex, lead to deadlock. Google syzbot reported this issue with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:938 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/1 1 lock held by swapper/1/0: ... Call Trace: <IRQ> dump_stack+0x197/0x210 ___might_sleep.cold+0x1fb/0x23e __might_sleep+0x95/0x190 __mutex_lock+0xc5/0x13c0 mutex_lock_nested+0x16/0x20 tpk_write+0x5d/0x340 resync_tnc+0x1b6/0x320 call_timer_fn+0x1ac/0x780 run_timer_softirq+0x6c3/0x1790 __do_softirq+0x262/0x98c irq_exit+0x19b/0x1e0 smp_apic_timer_interrupt+0x1a3/0x610 apic_timer_interrupt+0xf/0x20 </IRQ> See link https://syzkaller.appspot.com/bug?extid=2eeef62ee31f9460ad65 for more details. Fix it by using spinlock in process context instead of mutex and having interrupt disabled in critical section. Reported-by: syzbot+2eeef62ee31f9460ad65@syzkaller.appspotmail.com Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200113034842.435-1-zhenzhong.duan@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14MAINTAINERS: Add myself as maintainer of ehv_bytechan tty driverLaurentiu Tudor1-0/+6
Michael Ellerman made a call for volunteers from NXP to maintain this driver and I offered myself. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Timur Tabi <timur@kernel.org> Link: https://lore.kernel.org/r/20200114110012.17351-1-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14serial: xilinx_uartps: set_mctrl sets RTS and DTRMaarten Brock1-0/+4
set_mctrl now sets RTS and DTR. Signed-off-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/1574687731-21563-3-git-send-email-shubhrajyoti.datta@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14serial: xilinx_uartps: set_termios sets flowcontrolMaarten Brock1-5/+9
Let set_termios enable/disable automatic flow control. set_mctrl should not touch automatic flow control. Signed-off-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/1574687731-21563-2-git-send-email-shubhrajyoti.datta@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14serial: xilinx_uartps: Let get_mctrl return statusMaarten Brock1-3/+25
Some of the applications like microcom do not work if modem is disabled. To fix them we always return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR instead of 0 when using cts_override. Make get_mctrl return actual status when not using cts_override. Signed-off-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/1574687731-21563-1-git-send-email-shubhrajyoti.datta@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14tty/serial: 8250_exar: use true,false for bool variableZheng Bin1-3/+3
Fixes coccicheck warning: drivers/tty/serial/8250/8250_exar.c:189:6-17: WARNING: Assignment of 0/1 to bool variable drivers/tty/serial/8250/8250_exar.c:197:3-14: WARNING: Assignment of 0/1 to bool variable drivers/tty/serial/8250/8250_exar.c:199:3-14: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Link: https://lore.kernel.org/r/1578881777-65475-5-git-send-email-zhengbin13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14tty/serial: atmel: use true,false for bool variableZheng Bin1-3/+3
Fixes coccicheck warning: drivers/tty/serial/atmel_serial.c:1062:1-23: WARNING: Assignment of 0/1 to bool variable drivers/tty/serial/atmel_serial.c:1261:1-23: WARNING: Assignment of 0/1 to bool variable drivers/tty/serial/atmel_serial.c:1688:3-25: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Link: https://lore.kernel.org/r/1578881777-65475-4-git-send-email-zhengbin13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14tty/serial: kgdb_nmi: use true,false for bool variableZheng Bin1-2/+2
Fixes coccicheck warning: drivers/tty/serial/kgdb_nmi.c:121:6-13: WARNING: Assignment of 0/1 to bool variable drivers/tty/serial/kgdb_nmi.c:133:2-9: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Link: https://lore.kernel.org/r/1578881777-65475-3-git-send-email-zhengbin13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14tty: synclink_gt: use true,false for bool variableZheng Bin1-1/+1
Fixes coccicheck warning: drivers/tty/synclink_gt.c:2101:3-19: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Link: https://lore.kernel.org/r/1578881777-65475-2-git-send-email-zhengbin13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14tty: serial: msm_serial: RX SW/FIFO mode fallbackLoic Poulain1-1/+17
During db410c stress test and when the system is low on memory, the UART/console becomes unresponsive and never recover back. This has been narrowed down to the msm_start_rx_dma which does not manage error cases correctly (e.g. dma mapping failure), indeed, when an error happens, dma transfer is simply discarded and so never completed, leading to unconfigured RX path. This patch fixes this issue by switching to SW/FIFO mode in case of DMA issue. This mainly consists in resetting the receiver to apply RX BAM/DMA disabling change and re-enabling the RX level and stale interrupts (previously disabled for DMA transfers). The DMA will be re-enabled once memory is available since the SW/FIFO read function (msm_handle_rx_dm) retries to start dma on completion. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1578646684-17379-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14serial: 8250: Support disabling mdelay-filled probes of 16550A variantsJosh Triplett2-0/+13
The 8250 driver can probe for many variants of the venerable 16550A serial port. Some of those probes involve long (20ms) mdelay calls, which delay system boot. Modern systems and virtual machines don't have those variants. Provide a Kconfig option to disable probes for 16550A variants. Disabling this speeds up the boot of a virtual machine with a serial console by more than 20ms (a substantial fraction of the ~100ms needed to boot a carefully configured VM). Before: [ +0.021919] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A After: [ +0.000097] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: https://lore.kernel.org/r/20200111022513.GA166267@localhost Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14tty: serial: tegra: Optimize DMA buffer synchronizationDmitry Osipenko1-7/+9
Synchronize only the dirty part of DMA buffer in order to avoid unnecessary overhead of syncing of the clean part, which is the case of every serial DMA transfer in practice. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200112180919.5194-3-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14tty: serial: tegra: Activate RX DMA transfer by requestDmitry Osipenko1-32/+46
This allows DMA engine to go into runtime-suspended mode whenever there is no data to receive, instead of keeping DMA active all the time while TTY is opened (i.e. permanently active in practice, like in the case of UART Bluetooth). Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200112180919.5194-2-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13Merge 5.5-rc6 into tty-nextGreg Kroah-Hartman485-2350/+3773
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13Linux 5.5-rc6Linus Torvalds1-1/+1
2020-01-13Merge tag 'riscv/for-v5.5-rc6' of ↵Linus Torvalds4-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Two fixes for RISC-V: - Clear FP registers during boot when FP support is present, rather than when they aren't present - Move the header files associated with the SiFive L2 cache controller to drivers/soc (where the code was recently moved)" * tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fixup obvious bug for fp-regs reset riscv: move sifive_l2_cache.h to include/soc
2020-01-12riscv: Fixup obvious bug for fp-regs resetGuo Ren1-1/+1
CSR_MISA is defined in Privileged Architectures' spec: 3.1.1 Machine ISA Register misa. Every bit:1 indicate a feature, so we should beqz reset_done when there is no F/D bit in csr_misa register. Signed-off-by: Guo Ren <ren_guo@c-sky.com> [paul.walmsley@sifive.com: fix typo in commit message] Fixes: 9e80635619b51 ("riscv: clear the instruction cache and all registers when booting") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-12riscv: move sifive_l2_cache.h to include/socYash Shah3-5/+5
The commit 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") moves the sifive L2 cache driver to driver/soc. It did not move the header file along with the driver. Therefore this patch moves the header file to driver/soc Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: updated to fix the include guard] Fixes: 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-12Merge tag 'iommu-fixes-v5.5-rc5' of ↵Linus Torvalds3-7/+19
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Two fixes for VT-d and generic IOMMU code to fix teardown on error handling code paths. - Patch for the Intel VT-d driver to fix handling of non-PCI devices - Fix W=1 compile warning in dma-iommu code * tag 'iommu-fixes-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dma: fix variable 'cookie' set but not used iommu/vt-d: Unlink device if failed to add to group iommu: Remove device link to group on failure iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU
2020-01-12Merge branch 'i2c/for-current' of ↵Linus Torvalds4-15/+23
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two driver bugfixes, a documentation fix, and a removal of a spec violation for the bus recovery algorithm in the core" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: fix bus recovery stop mode timing i2c: bcm2835: Store pointer to bus clock dt-bindings: i2c: at91: fix i2c-sda-hold-time-ns documentation for sam9x60 i2c: at91: fix clk_offset for sam9x60
2020-01-12Merge tag 'clone3-tls-v5.5-rc6' of ↵Linus Torvalds18-32/+45
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread fixes from Christian Brauner: "This contains a series of patches to fix CLONE_SETTLS when used with clone3(). The clone3() syscall passes the tls argument through struct clone_args instead of a register. This means, all architectures that do not implement copy_thread_tls() but still support CLONE_SETTLS via copy_thread() expecting the tls to be located in a register argument based on clone() are currently unfortunately broken. Their tls value will be garbage. The patch series fixes this on all architectures that currently define __ARCH_WANT_SYS_CLONE3. It also adds a compile-time check to ensure that any architecture that enables clone3() in the future is forced to also implement copy_thread_tls(). My ultimate goal is to get rid of the copy_thread()/copy_thread_tls() split and just have copy_thread_tls() at some point in the not too distant future (Maybe even renaming copy_thread_tls() back to simply copy_thread() once the old function is ripped from all arches). This is dependent now on all arches supporting clone3(). While all relevant arches do that now there are still four missing: ia64, m68k, sh and sparc. They have the system call reserved, but not implemented. Once they all implement clone3() we can get rid of ARCH_WANT_SYS_CLONE3 and HAVE_COPY_THREAD_TLS. This series also includes a minor fix for the arm64 uapi headers which caused __NR_clone3 to be missing from the exported user headers. Unfortunately the series came in a little late especially given that it touches a range of architectures. Due to the holidays not all arch maintainers responded in time probably due to their backlog. Will and Arnd have thankfully acked the arm specific changes. Given that the changes are straightforward and rather minimal combined with the fact the that clone3() with CLONE_SETTLS is broken I decided to send them post rc3 nonetheless" * tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: um: Implement copy_thread_tls clone3: ensure copy_thread_tls is implemented xtensa: Implement copy_thread_tls riscv: Implement copy_thread_tls parisc: Implement copy_thread_tls arm: Implement copy_thread_tls arm64: Implement copy_thread_tls arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers
2020-01-11Merge branch 'for-linus' of ↵Linus Torvalds2-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fix from Jiri Kosina: "A regression fix for EPOLLOUT handling in hidraw and uhid" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: hidraw, uhid: Always report EPOLLOUT
2020-01-11Merge tag 'usb-5.5-rc6' of ↵Linus Torvalds19-93/+243
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a number of USB and PHY driver fixes for 5.5-rc6 Nothing all that unusual, just the a bunch of small fixes for a lot of different reported issues. The PHY driver fixes are in here as they interacted with the usb drivers. Full details of the patches are in the shortlog, and all of these have been in linux-next with no reported issues" * tag 'usb-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits) usb: missing parentheses in USE_NEW_SCHEME usb: ohci-da8xx: ensure error return on variable error is set usb: musb: Disable pullup at init usb: musb: fix idling for suspend after disconnect interrupt usb: typec: ucsi: Fix the notification bit offsets USB: Fix: Don't skip endpoint descriptors with maxpacket=0 USB-PD tcpm: bad warning+size, PPS adapters phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz usb: chipidea: host: Disable port power only if previously enabled usb: cdns3: should not use the same dev_id for shared interrupt handler usb: dwc3: gadget: Fix request complete check usb: musb: dma: Correct parameter passed to IRQ handler usb: musb: jz4740: Silence error if code is -EPROBE_DEFER usb: udc: tegra: select USB_ROLE_SWITCH USB: core: fix check for duplicate endpoints phy: cpcap-usb: Drop extra write to usb2 register phy: cpcap-usb: Improve host vs docked mode detection phy: cpcap-usb: Prevent USB line glitches from waking up modem phy: mapphone-mdm6600: Fix uninitialized status value regression phy: cpcap-usb: Fix flakey host idling and enumerating of devices ...
2020-01-11Merge tag 'char-misc-5.5-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is a single fix, for the chrdev core, for 5.5-rc6 There's been a long-standing race condition triggered by syzbot, and occasionally real people, in the chrdev open() path. Will finally took the time to track it down and fix it for real before the holidays. Here's that one patch, it's been in linux-next for a while with no reported issues and it does fix the reported problem" * tag 'char-misc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: chardev: Avoid potential use-after-free in 'chrdev_open()'
2020-01-11Merge tag 'staging-5.5-rc6' of ↵Linus Torvalds9-8/+38
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are some small staging driver fixes for 5.5-rc6. Nothing major here, just some small fixes for a comedi driver, the vt6656 driver, and a new device id for the rtl8188eu driver. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21 staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713 staging: vt6656: set usb_set_intfdata on driver fail. staging: vt6656: remove bool from vnt_radio_power_on ret staging: vt6656: limit reg output to block size staging: vt6656: correct return of vnt_init_registers. staging: vt6656: Fix non zero logical return of, usb_control_msg
2020-01-11Merge tag 'tty-5.5-rc6' of ↵Linus Torvalds2-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two tty/serial driver fixes for 5.5-rc6. The first fixes a much much reported issue with a previous tty port link patch that is in your tree, and the second fixes a problem where the serdev driver would claim ACPI devices that it shouldn't be claiming. Both have been in linux-next for a while with no reported issues" * tag 'tty-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serdev: Don't claim unsupported ACPI serial devices tty: always relink the port
2020-01-10Merge tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-blockLinus Torvalds7-30/+30
Pull block fixes from Jens Axboe: "A few fixes that should go into this round. This pull request contains two NVMe fixes via Keith, removal of a dead function, and a fix for the bio op for read truncates (Ming)" * tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block: nvmet: fix per feat data len for get_feature nvme: Translate more status codes to blk_status_t fs: move guard_bio_eod() after bio_set_op_attrs block: remove unused mp_bvec_last_segment
2020-01-10Merge tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-blockLinus Torvalds1-12/+0
Pull io_uring fix from Jens Axboe: "Single fix for this series, fixing a regression with the short read handling. This just removes it, as it cannot safely be done for all cases" * tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-block: io_uring: remove punt of short reads to async context
2020-01-10Merge tag 'mtd/fixes-for-5.5-rc6' of ↵Linus Torvalds8-28/+65
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "MTD: - sm_ftl: Fix NULL pointer warning. Raw NAND: - Cadence: fix compile testing. - STM32: Avoid locking. Onenand: - Fix several sparse/build warnings. SPI-NOR: - Add a flag to fix interaction with Micron parts" * tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: spi-nor: Fix the writing of the Status Register on micron flashes mtd: sm_ftl: fix NULL pointer warning mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy mtd: onenand: samsung: Fix iomem access with regular memcpy mtd: onenand: omap2: Fix errors in style mtd: cadence: Fix cast to pointer from integer of different size warning mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus
2020-01-10Merge tag 'sound-5.5-rc6' of ↵Linus Torvalds11-29/+67
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few piled ASoC fixes and usual HD-audio and USB-audio fixups. Some of them are for ASoC core error-handling" * tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: enable regmap internal locking ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen ALSA: hda/realtek - Set EAPD control to default for ALC222 ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5 ALSA: hda/realtek - Add new codec supported for ALCS1200A ASoC: Intel: boards: Fix compile-testing RT1011/RT5682 ASoC: SOF: imx8: Fix dsp_box offset ASoC: topology: Prevent use-after-free in snd_soc_get_pcm_runtime() ASoC: fsl_audmix: add missed pm_runtime_disable ASoC: stm32: spdifrx: fix input pin state management ASoC: stm32: spdifrx: fix race condition in irq handler ASoC: stm32: spdifrx: fix inconsistent lock state ASoC: core: Fix access to uninitialized list heads ASoC: soc-core: Set dpcm_playback / dpcm_capture ASoC: SOF: imx8: fix memory allocation failure check on priv->pd_dev ASoC: SOF: Intel: hda: hda-dai: fix oops on hda_link .hw_free ASoC: SOF: fix fault at driver unload after failed probe
2020-01-10Merge tag 'thermal-v5.5-rc5' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fix from Daniel Lezcano: "Fix backward compatibility with old DTBs on QCOM tsens (Amit Kucheria)" * tag 'thermal-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: drivers: thermal: tsens: Work with old DTBs
2020-01-10Merge tag 'pm-5.5-rc6' of ↵Linus Torvalds2-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Prevent the cpufreq-dt driver from probing Tegra20/30 (Dmitry Osipenko) and prevent the Intel RAPL power capping driver from crashing during CPU initialization due to a NULL pointer dereference if the processor model in use is not known to it (Harry Pan)" * tag 'pm-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online() cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs
2020-01-10tty/serial: atmel: RS485 & ISO7816: wait for TXRDY before sending dataCodrin.Ciubotariu@microchip.com1-7/+19
At this moment, TXEMPTY is checked before sending data on RS485 and ISO7816 modes. However, TXEMPTY is risen when FIFO (if used) or the Transmit Shift Register are empty, even though TXRDY might be up and controller is able to receive data. Since the controller sends data only when TXEMPTY is ready, on RS485, when DMA is not used, the RTS pin is driven low after each byte. With this patch, the characters will be transmitted when TXRDY is up and so, RTS pin will remain high between bytes. The performance improvement on RS485 is about 8% with a baudrate of 300. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Link: https://lore.kernel.org/r/20200107111656.26308-1-codrin.ciubotariu@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-10serial_core: Move sysrq functions from header fileDmitry Safonov2-79/+88
It's not worth to have them in every serial driver and I'm about to add another helper function. Signed-off-by: Dmitry Safonov <dima@arista.com> Link: https://lore.kernel.org/r/20200109215444.95995-2-dima@arista.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 02:35:40 +0300