summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-09-15drm/nva3/pwr/memx: Match blob's fb access behaviourRoy Spliet2-427/+446
Signed-off-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/pwr/memx: Return debugging informationRoy Spliet6-1412/+1438
Time measured from disabling FB to re-enabling, PPWR_IN reveals status of heads at the end of script. Helps debug various issues (like flicker). Signed-off-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/pwr/memx: Make FB disable and enable explicitRoy Spliet6-6/+43
Needs to be done after wait-for-VBLANK, and NVA3 requires register writes in between. Rather than hard-coding register writes, just split out fb_disable and fb_enable. v2. Squashed "fb/ramnve0: disable fb before reclocking" Signed-off-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nva3/pwr/memx: Implement "wait for VBLANK"Roy Spliet9-994/+1356
Signed-off-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/therm/nv84+: do not expose non-calibrated internal temp sensorMartin Peres1-1/+6
Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/therm: make sure the temperature settings are sane on nv84+Martin Peres4-1/+35
One of my nv92 has a calibrated internal sensor but it displays 0°C as the default values use sw calibration values to force the temperature to 0. Since we cannot read the temperature from the adt7473 present on this board, let's re-enable the internal reading! Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/subdev: add a pfuse subdev v2Martin Peres12-0/+363
We will use this subdev to disable temperature reading on cards that did not get a sensor calibration in the factory. v2: - rename "nouveau_fuse_rd32" to "gxXXX_fuse_rd32" as adviced by Christian Costa - fold the code a little as adviced by Emil Velikov Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nva3/clk: Set intermediate core clock on reclockingRoy Spliet3-14/+51
Signed-off-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nva3/clk: For PLL clocks always make sure the PLL is not in useRoy Spliet1-0/+9
Signed-off-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nva3/clk: Abort when PLL doesn't lockRoy Spliet1-1/+5
Signed-off-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nva3/clk: HOST clockRoy Spliet2-8/+78
Signed-off-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nva3/clk: Set PLL refclkRoy Spliet3-29/+48
Signed-off-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nva3/clk: Parse clock control registers more accuratelyRoy Spliet1-4/+28
Signed-off-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau: Fix duplicate definition of NV04_PFB_BOOT_0_*Pierre Moreau3-32/+24
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau: Display Nouveau boot options at launchPierre Moreau9-6/+37
It can help to remove any ambiguity about which options were passed to Nouveau, especially in case the user had some options set in /etc/modprobe.d/*.conf that he forgot about, as they won't appear in a dmesg. Signed-off-by: Pierre Moreau <pierre.morrow@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/pwr: wait for scrubbers to finish before uploading new ucodeBen Skeggs1-3/+2
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/pwr/fuc: make $r1-$r10 registers callee-saved in kernel.fucMartin Peres5-736/+749
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/pwr/fuc: add ld/st macrosMartin Peres1-0/+10
Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/pwr: add helpers for delay-to-ticks and ticks-to-delayMartin Peres9-2284/+2446
Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/pwr: add some arith functions (mul32_32_64, subu64 and addu64)Martin Peres10-1735/+1919
Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/pwr: fix the timers implementation with concurent processesMartin Peres5-990/+1133
The problem with the current implementation is that adding a timer improperly checked which process would time up first by not taking into account how much time elapsed since their timer got scheduled. Rework the re-scheduling decision t fix this. The catch with this fix is that we are limited to scheduling timers of up to 2^31 ticks to avoid any potential overflow. Since we are unlikely to need to wait for more than a second, this won't be a problem :) Another possible fix would be to decrement the timeouts of all processes but it would duplicate a lot of code and dealing with edge cases wasn't pretty last time I checked. Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/ppwr: enable ppwr on gm107Martin Peres2-1/+5
For some reason, it is now required to wait a 20 µs after the 0x200 reset of the engine. Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/gm107/therm: add PWM fan support v2Martin Peres7-6/+106
v2: change the copyright ownership from "Nouveau Community" to myself, as per Illia's recommendation. Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/therm/fan: do not use the pwm mode when the vbios tells us to ↵Martin Peres1-1/+7
use toggle Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/bios/fan: add support for maxwell's fan management table v2Martin Peres4-1/+111
Re-use the therm-exported fan structure with only two minor modifications: - pwm_freq: u16 -> u32; - add fan_type (toggle or PWM) v2: - Do not memset the table to 0 as it erases the pre-set default values Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/ltc: allocate tagram from memory that spans all partitionsBen Skeggs1-1/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/core/mm: allow allocation to be confined to a specific slice of heapBen Skeggs16-26/+38
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/core/mm: fill in holes with "allocated" nodesBen Skeggs2-6/+21
The allocation algorithm doesn't expect there to be holes in the mm, which causes its alignment/cutoff calculations to choke (and go negative) when encountering the last chunk of a block before a hole. The least expensive solution is to simply fill in any holes with nodes that are pre-marked as being allocated. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/core/mm: dump mm when trying to tear one down that still has ↵Ben Skeggs1-9/+32
allocations Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/core/mm: modify test for if building a mm with holes in itBen Skeggs2-2/+4
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/core/mm: make it clearer what (type == 0) meansBen Skeggs2-9/+10
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/gf100/ltc: translate interrupt status into more meaningful namesBen Skeggs2-5/+29
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/ltc: drop workaround for an interrupt storm that no longer happensBen Skeggs2-10/+0
This is really the wrong thing to do, but at the time it was our only option to prevent worse issues. We no longer cause quite so much anger from LTC, so it's not needed. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nv50-/disp: add support for completion eventsBen Skeggs11-11/+173
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/core: pass related object into notify constructorBen Skeggs18-28/+42
The event source types/index might need to be derived from it. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-15drm/nouveau/bar: ioremap only the areas that we're actually usingBen Skeggs2-20/+19
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-13Merge tag 'topic/drm-header-rework-2014-09-12' of ↵Dave Airlie42-501/+588
git://anongit.freedesktop.org/drm-intel into drm-next So here's the header cleanup, rebased on top of drm-next. Two new header files are created here: - drivers/gpu/drm/drm_internal.h for non-legacy drm.ko private declarations. - include/drm/drm_legacy.h for legacy interfaces used by non-kms drivers. And of course lots fo stuff gets shuffled into the already existing drivers/gpu/drm/drm_legacy.h for drm.ko internal stuff. topic branch smoke-tested in drm-intel-nightly for a bit. And the 0day tester also worked through it (and found a few places I didn't add a static to functions). * tag 'topic/drm-header-rework-2014-09-12' of git://anongit.freedesktop.org/drm-intel: drm: Move DRM_MAGIC_HASH_ORDER into drm_drv.c drm: Move drm_class to drm_internal.h drm: Move LOCK_TEST_WITH_RETURN to <drm/drm_legacy.h> drm: Move legacy buffer structures to <drm/drm_legacy.h> drm: Move drm_memory.c map support declarations to <drm/drm_legacy.h> drm: Purge ioctl forward declarations from drmP.h drm: unexport drm_global_mutex drm: Move piles of functions from drmP.h to drm_internal.h drm: Move vblank related module options into drm_irq.c drm: Drop drm_sysfs_class from drmP.h drm: Move __drm_pci_free to drm_legacy.h drm: Create drm legacy driver header drm: Move drm_legacy_vma_flush into drm_legacy.h drm: Move sg functions into drm_legacy.h drm: Move dma functions into drm_legacy.h
2014-09-12drm: Move DRM_MAGIC_HASH_ORDER into drm_drv.cDaniel Vetter2-8/+2
Only used in one place ever, so put it right next to that. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12drm: Move drm_class to drm_internal.hDaniel Vetter2-2/+2
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12drm: Move LOCK_TEST_WITH_RETURN to <drm/drm_legacy.h>Daniel Vetter2-17/+17
Unfortunately we can't move struct drm_lock_data easily since it's embedded into struct drm_master. And figuring out where exactly this struct should be allocated isn't that simple ... Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12drm: Move legacy buffer structures to <drm/drm_legacy.h>Daniel Vetter9-118/+127
A few odd cases: - mgag200 someho had a totally unused drm_dma_handle_t. Remove it. - i915 still uses the legacy pci dma alloc api, so grows an include. Everything else fairly standard. v2: Include "drm_legacy.h" in drm.ko source files for consistency. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12drm: Move drm_memory.c map support declarations to <drm/drm_legacy.h>Daniel Vetter11-91/+88
And replace the drm_core_ prefix with drm_legacy_ since really, this isn't core stuff. Also drop drm_core_dropmap since it's unused. v2: Fix up i810.ko fully which somehow slipped through. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12drm: Purge ioctl forward declarations from drmP.hDaniel Vetter2-142/+126
If we push down the ioctl table in drm_ioctl.c all the forward declarations in drmP.h are not required any more. v2: Fold in fixup from Fenugguang Wu to declare functions as static. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12drm: unexport drm_global_mutexDaniel Vetter4-2/+2
Drivers really, really have no business even looking at this lock. And thankfully they don't. So unexport it and move the declaration to drm_internal.h. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12drm: Move piles of functions from drmP.h to drm_internal.hDaniel Vetter10-55/+76
This way drivers can't grow crazy ideas any more, and it also helps a bit in reviewing EXPORT_SYMBOLS. v2: Even more stuff. Unfortunately we can't move drm_vm_open_locked because exynos does some horrible stuff with it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12drm: Move vblank related module options into drm_irq.cDaniel Vetter5-17/+40
This allows us to drop 2 header declarations from drmP.h. The 3rd one is also used in drm_ioctl.c, so for that create a new drm_internal.h header for non-legacy non-kms (since we have internal headers for those parts already) declarations private to drm.ko. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12drm: Drop drm_sysfs_class from drmP.hDaniel Vetter1-1/+0
No user at all. My guess is that this is a leftover from ttm before it used the more abstract helpers to register/unregister its sysfs objects (see drm_sysfs.h). At least in the existing history it was never used. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12drm: Move __drm_pci_free to drm_legacy.hDaniel Vetter5-5/+7
Also sprinkle the customary legacy_ prefix. Unfortunately we can't move the other functions since i915 is still using them. Shame on me for that one :( v2: Fix patch subject as spotted by David Herrmann. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12drm: Create drm legacy driver headerDaniel Vetter11-15/+73
And move a few legayc functions to start things over there. It compiles ... Inspired by a patch from Dave Airlie, but with a split between drm.ko private legacy functions and stuff used by drivers. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12drm: Move drm_legacy_vma_flush into drm_legacy.hDaniel Vetter2-2/+2
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 02:26:03 +0300