summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-05-16arm64: dts: renesas: r8a77965: Add HDMI encoder instanceKieran Bingham1-1/+29
Add the HDMI encoder to the R8A77965 DT in disabled state. Based on a similar patch of the R8A7796 device tree by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Kieran: Rebase to top of tree] Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77965: Populate the DU instance placeholderKieran Bingham1-3/+13
The DU entity node has been previously added but only as a placeholder. Populate the node with the properties to use the device. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77965: Add VSP instancesKieran Bingham1-0/+44
The r8a77965 has 4 VSP instances. Based on a similar patch of the R8A7796 device tree by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Kieran: Rebased to top of tree, fixed sort orders] Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77965: Add FCPF and FCPV instancesKieran Bingham1-0/+41
The FCPs handle the interface between various IP cores and memory. Add the instances related to the FDPs and VSP2s. Based on a similar patch of the R8A7796 device tree by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Kieran: Rebase to top of tree] Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77990: Revise the cache controller nodeYoshihiro Shimoda1-2/+1
The cache controller node should not have unit-addresses and reg properties. So, this patch removes them. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77990: Revise the psci nodeYoshihiro Shimoda1-1/+1
The basic support patch 9491a8b17530 ("arm64: dts: renesas: Add Renesas R8A77990 SoC support") lacks the compatible "arm,psci-1.0" in the psci node. So, this patch revises it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a7795-es1: Enable IPMMU devicesSimon Horman1-1/+0
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled in DT on the r8a7795 ES1.0 Soc. This is a follow up for a patch by Magnus Damm for the the r8a7795 ES2.0 and other R-Car Gen 3 SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a7796-salvator-x: enable HDMI soundKuninori Morimoto1-0/+28
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a7795-salvator-x: enable HDMI soundKuninori Morimoto1-0/+46
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a7796-salvator-xs: enable HDMI soundKuninori Morimoto1-0/+28
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a7795-salvator-xs: enable HDMI soundKuninori Morimoto1-0/+46
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a7795-es1-salvator-x: enable HDMI soundKuninori Morimoto1-0/+46
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: salvator-common: use audio-graph-card for SoundKuninori Morimoto1-16/+22
Current Sound is using simple-audio-card which can't support HDMI. To use HDMI sound, we need to use audio-graph-card. But, one note is that r8a7795 has 2 HDMI ports, but r8a7796 has 1. Because of this mismatch, supporting HDMI on salvator-common is impossible. Thus, this patch exchange sound card to audio-graph-card and keep supporting ak4613 as 1st sound node. r8a7795/r8a7796 salvator-x{s} need to add HDMI sound individually. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a7796: add HDMI sound supportKuninori Morimoto1-0/+4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a7795: add HDMI sound supportKuninori Morimoto1-0/+8
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77980: add MMC supportSergei Shtylyov1-0/+12
Define the generic R8A77980 part of the MMC0 (SDHI2) device node. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: condor: add EtherAVB pinsSergei Shtylyov1-0/+8
Add the (previously omitted) EtherAVB pin data to the Condor board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: condor: add SCIF0 pinsSergei Shtylyov1-0/+15
Add the (previously omitted) SCIF0 pin data to the Condor board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77980: add PFC supportSergei Shtylyov1-0/+5
Define the generic R8A77980 part of the PFC device node. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: v3msk: add EtherAVB pinsSergei Shtylyov1-0/+8
Add the (previously omitted) EtherAVB pin data to the V3M Starter Kit board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: eagle: add EtherAVB pinsSergei Shtylyov1-0/+8
Add the (previously omitted) EtherAVB pin data to the Eagle board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: ulcb: Rename EtherAVB "mdc" pin group to "mdio"Geert Uytterhoeven1-3/+3
On other Renesas SoCs, the pin group for the MDIO bus is named "mdio" instead of "mdc". Fix the inconsistency, now the pinctrl drivers for R-Car H3, M3-W, and M3-N have gained support for the traditional pin group name. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: salvator-common: Rename EtherAVB "mdc" pin group to "mdio"Geert Uytterhoeven1-3/+3
On other Renesas SoCs, the pin group for the MDIO bus is named "mdio" instead of "mdc". Fix the inconsistency, now the pinctrl drivers for R-Car H3, M3-W, and M3-N have gained support for the traditional pin group name. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: draak: Rename EtherAVB "mdc" pin group to "mdio"Geert Uytterhoeven1-1/+1
On other Renesas SoCs, the pin group for the MDIO bus is named "mdio" instead of "mdc". Fix the inconsistency, now the pinctrl drivers for R-Car H3, M3-W, and M3-N have gained support for the traditional pin group name. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77995: Enable IPMMU devicesMagnus Damm1-10/+0
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled in DT on the r8a77995 SoC. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> [simon: rebased] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77970: Enable IPMMU devicesMagnus Damm1-2/+0
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled in DT on the r8a77970 SoC. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> [simon: rebased] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a7796: Enable IPMMU devicesMagnus Damm1-5/+0
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled in DT on the r8a7796 SoC. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a7795: Enable IPMMU devicesMagnus Damm1-12/+0
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled in DT on the r8a7795 SoC. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: Add Renesas Ebisu board supportTakeshi Kihara2-0/+38
Basic support for the Renesas Ebisu board based on R-Car E3: - Memory, - Main crystal, - Serial console, Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [shimoda: rebase and add SPDX-License-Identifier] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: Add Renesas R8A77990 SoC supportYoshihiro Shimoda1-0/+127
This patch adds basic support for the Renesas R-Car E3 (R8A77990) SoC: - PSCI - CPU (single) - Cache controller - Main clocks and controller - Interrupt controller - Timer - PMU - Reset controller - Product register - System controller - UART for console Inspried by a patch by Takeshi Kihara in the BSP. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77970: sort subnodes of the soc nodeYoshihiro Kaneko1-194/+194
Sort subnodes of the soc node. - The primary key is the bus address. - The secondary key is the IP block. - The tertiary key is the node name. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> [simon: rebased; move fcpvd0 to after vspd0] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77965: sort subnodes of the soc nodeYoshihiro Kaneko1-428/+428
Sort subnodes of the soc node. - The primary key is the bus address. - The secondary key is the IP block. - The tertiary key is the node name. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77965: sort subnodes of the root nodeYoshihiro Kaneko1-60/+60
Sort subnodes of the root node alphanumerically. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77995: sort subnodes of the soc nodeYoshihiro Kaneko1-348/+347
Sort subnodes of the soc node. - The primary key is the bus address. - The secondary key is the IP block. - The tertiary key is the node name. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77995: sort subnodes of the root nodeYoshihiro Kaneko1-10/+10
Sort subnodes of the root node alphanumerically. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: eagle: Enable HDMI outputJacopo Mondi1-0/+93
Enable HDMI output on Renesas R-Car V3M Eagle board. The HDMI output is enabled connecting the DU LVDS output to the transparent LVDS converter THC63LVD1024, and successively routing its RGB output to the ADV7511W HDMI encoder. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for THC63LVD1024: ] Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77970: add LVDS supportSergei Shtylyov1-0/+28
Define the generic R8A77970 part of the LVDS device node. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77970: add DU supportSergei Shtylyov1-0/+29
Define the generic R8A77970 part of the DU device node. Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a77970: add VSPD supportSergei Shtylyov1-0/+10
Describe VSPD0 in the R8A77970 device tree; it will be used by DU in the next patch... Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a7796: decrease temperature hysteresisNiklas Söderlund1-6/+6
To incorporate more tests by the hardware team decrease the hysteresis value to 1C. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: r8a7795: decrease temperature hysteresisNiklas Söderlund1-6/+6
To incorporate more tests by the hardware team decrease the hysteresis value to 1C. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16arm64: dts: renesas: Add Renesas R8A77990 Kconfig supportYoshihiro Shimoda1-0/+6
Add configuration option for the R-Car E3 (R8A77990) SoC. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16arm64: dts: renesas: r8a77970: add FCPVD supportSergei Shtylyov1-0/+8
Describe FCPVD0 in the R8A77970 device tree; it will be used by VSPD0 in the next patch... Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16arm64: dts: renesas: r8a77965: Add PWM device nodesYoshihiro Shimoda1-7/+41
This patch adds PWM device nodes for r8a77965. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16arm64: dts: renesas: r8a77965: Add all MSIOF device nodesTakeshi Kihara1-0/+62
Add the device nodes for all MSIOF SPI controllers. Based on several similar patches of the R8A7796 device tree by Geert Uytterhoeven <geert+renesas@glider.be> and Simon Horman <horms+renesas@verge.net.au>. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Use numerical power domain indices for initial r8a77965.dtsi] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-16arm64: dts: renesas: r8a7795: sort subnodes of the soc nodeSimon Horman1-871/+871
Sort subnodes of the soc node. - The primary key is the bus address. - The secondary key is the IP block. - The tertiary key is the node name. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16arm64: dts: renesas: r8a7795: sort subnodes of the root nodeSimon Horman1-113/+105
Sort subnodes of the root node alphanumerically. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. Also remove excessive line-wrapping of interrupts-extended property of timer node. This should not have any run-time effect. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16arm64: dts: renesas: r8a7796: sort subnodes of the soc nodeSimon Horman1-858/+858
Sort subnodes of the soc node. - The primary key is the bus address. - The secondary key is the IP block. - The tertiary key is the node name. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16arm64: dts: renesas: r8a7796: sort subnodes of the root nodeSimon Horman1-81/+81
Sort subnodes of the root node alphanumerically. This is part of an ongoing effort to provide consistent node order in the DT of Renesas SoCs to improve maintainability. This should not have any run-time effect. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16arm64: dts: renesas: r8a77970: Update IPMMU DS1 bit numberMagnus Damm1-1/+1
Judging by "R-Car-Gen3-rev0.80" IPMMU IMSSTR register documentation for [R-Car V3M] the DS1 bit field should be bit 0. Update the ipmmu-main property to make it match the data sheet. Fixes: ce3b52a1595b ("arm64: dts: renesas: r8a77970: Add IPMMU device nodes") Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 17:30:18 +0300