summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-01-08drm/i915: use crtc_htotal when calculating ilk watermarksJesse Barnes1-1/+1
This was introduced in: commit 7c4a395ff8f441acb7876281c6777624e6410349 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Oct 9 19:17:56 2013 +0300 drm/i915: Don't re-compute pipe watermarks except for the affected pipe and I missed fixing it in: commit fec8cba306f974f3a4491176994de5d821273643 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Wed Nov 27 11:10:26 2013 -0800 drm/i915: use crtc_htotal in watermark calculations to match fastboot v2 It's needed for ILK+ platforms to fastboot without crashing on a divide by 0 after a DPMS on action. Note: Ville mentioned in his review that this confusion seems to go down to the original introduction of this code in commit 801bcfffbb0721d7131e930f9a46103e539c43a4 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri May 31 10:08:35 2013 -0300 drm/i915: properly set HSW WM_PIPE registers So it seems to have been missed both in the fastboot patch and in the 3d mode suppport (where only crtc_htotal reflects the real pipe width). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Add note based on Ville's review.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-08drm/i915: fix fastboot pfit disable hack to update pipe w/hJesse Barnes1-0/+2
When fastbooting, we read out the pipe timings early on, and then in a panel fitted config, disable the fitter later. But we weren't updating the pipe src h/w, which meant the mouse cursor was clipped to the pfitted size rather than the native size set later. Fix that up so the cursor is visible in the new mode. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-08drm/i915: check modeset state after a pipe_set_base if using fastbootJesse Barnes1-0/+10
Otherwise we won't check the state until the next DPMS transition, which may never happen. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-08drm/i915: Simplify watermark/init_clock_gating setupVille Syrjälä1-62/+16
Avoid duplicating the same piece of code several times by separating the watemark vfunc setup from the init_clock_gating vfunc setup on PCH platforms. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-08drm/i915: Enable watermarks for BDWVille Syrjälä1-0/+11
We forgot to intialize the watermark vfuncs for BDW, and hence the watermarks were never updated. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-08drm/i915: Fix watermark code for BDWVille Syrjälä1-7/+7
Looks like I forgot to update the ILK/SNB/IVB watermark patches to deal with BDW. Add the relevant BDW checks to make sure we take the HSW codepaths on BDW as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/i915: avoid unclaimed registers when capturing the error statePaulo Zanoni1-1/+2
We're iterating over the CPU transcoders, so check for the correct power domain. This fixes many "unclaimed register" error messages. This can be reproduced by the IGT test mentioned below, but we still get a FAIL when we run it. Testcase: igt/kms_lip/flip-vs-panning-vs-hang Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/i915: Flush outstanding requests before allocating new seqnoChris Wilson1-4/+8
In very rare cases (such as a memory failure stress test) it is possible to fill the entire ring without emitting a request. Under this circumstance, the outstanding request is flushed and waited upon. After space on the ring is cleared, we return to emitting the new command - except that we just cleared the seqno allocated for this operation and trigger the sanity check that a request is only ever emitted with a valid seqno. The fix is to rearrange the code to make sure the allocation of the seqno for this operation is after any required flushes of outstanding operations. The bug exists since the preallocation was introduced in commit 9d7730914f4cd496e356acfab95b41075aa8eae8 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 27 16:22:52 2012 +0000 drm/i915: Preallocate next seqno before touching the ring Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/i915: remove duplicate MODULE_LICENSE definitionJani Nikula1-2/+0
Multiple definitions show up multiple times in modinfo output. There's already an identical one in i915_drv.c along with other MODULE_* definitions, so drop the lone one in intel_fbdev.c. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/i915: Avoid dereference past end of page array in ↵Chris Wilson1-9/+9
gen8_ppgtt_insert_entries() The bug from gen6_ppgtt_insert_entries() was replicated into gen8_ppgtt_insert_entries(). This applies the fix for the OOPS from the previous patch to the gen8 routine. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/i915: Avoid dereference past end of page array in ↵Chris Wilson1-7/+9
gen6_ppgtt_insert_entries() [ 89.237347] BUG: unable to handle kernel paging request at ffff880096326000 [ 89.237369] IP: [<ffffffff81347227>] gen6_ppgtt_insert_entries+0x117/0x170 [ 89.237382] PGD 2272067 PUD 25df0e067 PMD 25de5c067 PTE 8000000096326060 [ 89.237394] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 89.237404] CPU: 1 PID: 1981 Comm: gem_concurrent_ Not tainted 3.13.0-rc4+ #639 [ 89.237411] Hardware name: Intel Corporation 2012 Client Platform/Emerald Lake 2, BIOS ACRVMBY1.86C.0078.P00.1201161002 01/16/2012 [ 89.237420] task: ffff88024c038030 ti: ffff88024b130000 task.ti: ffff88024b130000 [ 89.237425] RIP: 0010:[<ffffffff81347227>] [<ffffffff81347227>] gen6_ppgtt_insert_entries+0x117/0x170 [ 89.237435] RSP: 0018:ffff88024b131ae0 EFLAGS: 00010286 [ 89.237440] RAX: ffff880096325000 RBX: 0000000000000400 RCX: 0000000000001000 [ 89.237445] RDX: 0000000000000200 RSI: 0000000000000001 RDI: 0000000000000010 [ 89.237451] RBP: ffff88024b131b30 R08: ffff88024cc3aef0 R09: 0000000000000000 [ 89.237456] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88024cc3ae00 [ 89.237462] R13: ffff88024a578000 R14: 0000000000000001 R15: ffff88024a578ffc [ 89.237469] FS: 00007ff5475d8900(0000) GS:ffff88025d020000(0000) knlGS:0000000000000000 [ 89.237475] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 89.237480] CR2: ffff880096326000 CR3: 000000024d531000 CR4: 00000000001407e0 [ 89.237485] Stack: [ 89.237488] ffff880000000000 0000020000000000 ffff88024b23f2c0 0000000100000000 [ 89.237499] 0000000000000001 000000000007ffff ffff8801e7bf5ac0 ffff8801e7bf5ac0 [ 89.237510] ffff88024cc3ae00 ffff880248a2ee40 ffff88024b131b58 ffffffff813455ed [ 89.237521] Call Trace: [ 89.237528] [<ffffffff813455ed>] ppgtt_bind_vma+0x3d/0x60 [ 89.237534] [<ffffffff8133d8dc>] i915_gem_object_pin+0x55c/0x6a0 [ 89.237541] [<ffffffff8134275b>] i915_gem_execbuffer_reserve_vma.isra.14+0x5b/0x110 [ 89.237548] [<ffffffff81342a88>] i915_gem_execbuffer_reserve+0x278/0x2c0 [ 89.237555] [<ffffffff81343d29>] i915_gem_do_execbuffer.isra.22+0x699/0x1250 [ 89.237562] [<ffffffff81344d91>] ? i915_gem_execbuffer2+0x51/0x290 [ 89.237569] [<ffffffff81344de6>] i915_gem_execbuffer2+0xa6/0x290 [ 89.237575] [<ffffffff813014f2>] drm_ioctl+0x4d2/0x610 [ 89.237582] [<ffffffff81080bf1>] ? cpuacct_account_field+0xa1/0xc0 [ 89.237588] [<ffffffff81080b55>] ? cpuacct_account_field+0x5/0xc0 [ 89.237597] [<ffffffff811371c0>] do_vfs_ioctl+0x300/0x520 [ 89.237603] [<ffffffff810757a1>] ? vtime_account_user+0x91/0xa0 [ 89.237610] [<ffffffff810e40eb>] ? context_tracking_user_exit+0x9b/0xe0 [ 89.237617] [<ffffffff81083d7d>] ? trace_hardirqs_on+0xd/0x10 [ 89.237623] [<ffffffff81137425>] SyS_ioctl+0x45/0x80 [ 89.237630] [<ffffffff815afffa>] tracesys+0xd4/0xd9 [ 89.237634] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 0f 1f 84 00 00 00 00 00 83 45 bc 01 49 8b 84 24 78 01 00 00 65 ff 0c 25 e0 b8 00 00 8b 55 bc <4c> 8b 2c d0 65 ff 04 25 e0 b8 00 00 49 8b 45 00 48 c1 e8 2d 48 [ 89.237741] RIP [<ffffffff81347227>] gen6_ppgtt_insert_entries+0x117/0x170 [ 89.237749] RSP <ffff88024b131ae0> [ 89.237753] CR2: ffff880096326000 [ 89.237758] ---[ end trace 27416ba8b18d496c ]--- This bug dates back to the original introduction of the gen6_ppgtt_insert_entries() Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Dropped cc: stable since without full ppgtt there's no way we'll access the last page directory with this function since that range is occupied (only in the allocator) with the ppgtt pdes. Without aliasing we can start to use that range and blow up.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/i915: Mention when we enable the Ironlake iommu workaroundsChris Wilson1-0/+3
The iommu and gfx on Ironlake do not like each other and require a big hammer to prevent hard machine hangs. In commit 5c0422878fcdc279ae9a8e8b66972a15b5efb67f Author: Ben Widawsky <ben@bwidawsk.net> Date: Mon Oct 17 15:51:55 2011 -0700 drm/i915: ILK + VT-d workaround we added the workaround, but never emitted any debug message that it was active. Doing so should help identify known performance regressions. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-06drm/i915: Fix refcount leak and possible NULL pointerdereference.Tetsuo Handa1-1/+11
Since get_pid_task() grabs a reference on the task_struct, we have to drop the refcount after reading that task's comm name. Use pid_task() with RCU instead. Also, avoid directly reading like pid_task()->comm because pid_task() will return NULL if the task have already exit()ed. This patch fixes both problems. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-18drm/i915: grab a pages pin count for preallocate stolenDaniel Vetter1-0/+1
But only when we indeed set up a gtt mapping. We need this since the vma also holds a pages_pin_count, on top of the unconditional pages_pin_count we grab for all stolen objects (to avoid swap-out). This should avoid a pages_pin_count underrun when cleaning up framebuffers objects taken over from the BIOS. Chris mentioned in his review that this bug even predates the vma conversion. Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: s/haswell_update_wm/ilk_update_wm/Imre Deak2-45/+45
We use this hook starting from ILK onwards, so change the prefix accordingly. Also rename functions/struct names used from haswell_update_wm that are relevant to ILK already. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: remove unused WM definesImre Deak1-36/+0
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: simplify platform specific code in hsw_write_wm_valuesImre Deak1-6/+5
No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17Revert "drm/i915/sprite: Always enable the scaler on IronLake"Ville Syrjälä1-1/+1
Apparently always enabling the sprite scaler magically made sprites work on ILK in the past. I think the real reason for the failure was missing sprite watermark programming, and enabling the scaler effectively disabled LP1+ watermarks, which was enough to keep things going. Or it might be that the hardware more or less ignores watermarks for scaled sprites since things seem to work even if I leave sprite watermarks at 0 and disable all other planes except the sprite. In any case, we left the scaler always on but then failed to check whether we might be exceeding the scaler's source size limits. That caused the sprite to fail when a sufficiently large unscaled image was being displayed. Now that we're getting proper watermark programming for ILK, we can keep the scaler disabled unless we need to do actual scaling. This reverts commit 8aaa81a166d80ac9bf2813984e5b4c2503d0fe08. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Avoid underruns when disabling spritesVille Syrjälä1-0/+12
As the watermark registers aren't double bufferd, clearing the watermarks immediately after writing the sprite registers can be hazardous. Until we have something better, add a wait for vblank between the two steps to make sure the sprite no longer needs the watermark levels before we clear them. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Don't disable primary when color keying is usedVille Syrjälä1-1/+10
When color keying is used, the primary may not be invisible even though the sprite fully covers it. So check for color keying before deciding to disable the primary plane. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Try to fix the messy IVB sprite scaling workaroundVille Syrjälä3-40/+46
We now have a very clear method of disabling LP1+ wartermarks, and we can actually detect if we actually did disable them, or if they were already disabled. Use that to clean up the WaCxSRDisabledForSpriteScaling:ivb handling. I was hoping to apply the workaround in a way that wouldn't require a blocking wait, but sadly IVB really does appear to require LP1+ watermarks to be off for an entire frame before enabling sprite scaling. Simply disabling LP1+ watermarks during the previous frame is not enough, no matter how early in the frame we do it :( Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Move ILK/SNB/IVB over to the HSW WM codeVille Syrjälä2-646/+12
The new HSW watermark code can now handle ILK/SNB/IVB as well, so switch them over. Kill the old code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Disable LP1+ watermarks safely in initVille Syrjälä1-12/+19
ILK doesn't like if we just write the LP1+ watermarks registers with 0. We need to just disable the watermarks by clearing the enable bit. Use that method also when disabling LP1+ watermarks in init_clock_gating. It looks like disabling the sprite LP1 watermarks can cause underruns even if we just toggle the WM1S_LP_EN bit. So treat that bit like the actual watermark numbers and avoid setting it to 0 immediately. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Linetime watermarks are a HSW featureVille Syrjälä1-2/+4
Linetime watermarks don't exist on ILK/SNB/IVB, so don't compute them except on HSW. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Disable FBC WM on ILK, and disable LP2+ when FBC is enabledVille Syrjälä1-1/+16
ILK has a bunch of issues with FBC. First of all, BSpec tells us that FBC WM should never be enabled. Secondly when FBC is enabled with FBC WM disabled, LP2+ watermarks must be disabled. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Don't merge LP1+ watermarks on ILK/SNB/IVB when multiple pipes are ↵Ville Syrjälä1-2/+8
enabled Multi-pipe LP1+ watermarks are a HSW+ feature, so let's not do it on earlier generations. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Fix LP1+ watermark disabling ILKVille Syrjälä1-13/+20
On ILK disabling LP1+ watermarks must be done carefully to avoid underruns. If we just write 0 to the register in the middle of the scan cycle we often get an underrun. So instead we have to leave the actual watermark levels in the register intact, and just toggle the enable bit. Presumably the hardware takes a while to get out of low power mode, and so the watermark level need to stay valid until that time. We also have to be careful with the WM1S_LP_EN bit. It seems the hardware more or less treats it like the actual watermarks numbers, and so we must not toggle it too soon. Just leave it alone when disabling the LP1+ watermarks. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Fix LP1 sprite watermarks for ILK/SNBVille Syrjälä1-7/+20
ILK/SNB don't have LP2+ watermarks for sprites. Also the LP1 sprite watermark register has its own enable bit. Take these differences into account when programming the LP1+ registers. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Avoid computing invalid WM levels when sprites/scaling is enabledVille Syrjälä1-0/+8
On ILK/SNB only LP0/1 watermarks can be enabled when sprites are enabled, and on ILK/SNB/IVB sprite scaling is limited to LP0 only. So we can avoid computing the extra levels we're never going to use. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Add ILK/SNB/IVB WM latency field supportVille Syrjälä1-1/+12
Add a new function ilk_wm_lp_latency() which will tell us what to write into the WM_LPx register latency field. HSW is different from erlier gens in this regard. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Add IVB DDB partitioning controlVille Syrjälä2-8/+24
On IVB the display data buffer partitioning control lives in the DISP_ARB_CTL2 register. Add the relevant defines/code for it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: kick firmware fbs even when i915 fbdev is disabledDaniel Vetter1-1/+1
Otherwise we don't kick out firmware framebuffers like vesafb and efifb when CONFIG_DRM_I915_FBDEV=n but CONFIG_FB=y. There's still the pesky issue with vgacon which we should somehow replace with the dummy console at least. We have a similar issue at module un/reload, since vgacon state is terminally botched after i915.ko has loaded in modeset mode. But this gets us a step further at least. v2: Use IS_ENABLED - I always get this wrong for tristates. Spotted by Jani. Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Use IS_VALLEYVIEW() to test the is_valleyview flagDamien Lespiau1-2/+6
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Use symbolic names for booleans in i915_semaphore_is_enabledDaniel Vetter1-3/+3
Noticed while reviewing a patch and couldn't resist the OCD. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Don't emit mbox updates without semaphoresBen Widawsky1-5/+6
Aside from the fact that it leaves confusing dumps on error capture, it is entirely unnecessary, and potentially harmful in cases like BDW, where the instruction has changed. In reality (seemingly), this will have no behavioral impact. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915: Reorder/respace MI instruction definitionBen Widawsky1-26/+26
A few command were out of numerical order and had different spacing. Put them back in numerical order, with proper spacing. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915/vlv: split DPIO init and resetJesse Barnes1-1/+11
We only need to init the reg offset for DPIO once, but we need to reset DPIO at resume time and at init time. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-17drm/i915/vlv: add early DPIO init v3Jesse Barnes1-0/+2
Just add an early init since we may need to access DPIO regs early on. The init call in modeset_init_hw is also needed for the resume case, when we need to reset DPIO to keep things happy. v2: split reset and reg init v3: split patches (Daniel) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-16drm/i915: only build i915_debugfs.c when CONFIG_DEBUG_FS is enabledJani Nikula2-5/+2
The whole file is wrapped around in #if defined(CONFIG_DEBUG_FS) anyway, so skip the file at the build level already. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-16drm/i915: fix return value check of debugfs_create_file()Wei Yongjun1-6/+6
In case of error, the function debugfs_create_file() returns NULL pointer not ERR_PTR() if debugfs is enabled. The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-16drm/i915: parse backlight modulation frequency from the BIOS VBTJani Nikula3-0/+50
We don't actually do anything with the information yet, but parse and log what's in the VBT. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-14drm/i915: add runtime PM support on HaswellPaulo Zanoni1-1/+1
Now that all the infrastructure is in place and all the tests from pm_pc8 pass, we can finally enable the feature. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-14drm/i915: release the GTT mmaps when going into D3Paulo Zanoni3-0/+19
So we'll get a fault when someone tries to access the mmap, then we'll wake up from D3. v2: - Rebase v3: - Use gtt active/inactive Testcase: igt/pm_pc8/gem-mmap-gtt Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> [danvet: Add comment + WARN as discussed with Paulo on irc.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-14drm/i915: cancel the hangcheck before runtime suspendPaulo Zanoni1-0/+1
The hangcheck function requires the hardware to be working, and if we're suspending we're going to put the HW in D3 state. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-13drm/i915/bdw: Implement ff workaroundsBen Widawsky2-3/+10
WaVSRefCountFullforceMissDisable and WaDSRefCountFullforceMissDisable VS is a carry-over from HSW, and DS is likely not used by anyone yet. Cc: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Line of 106 chars is too long. Really.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-13drm/i915/bdw: Force all Data Cache Data Port access to be Non-CoherentBen Widawsky2-0/+12
I stumbled on to some unimplemented errata. To be honest, I am not really sure of the impact, just that the docs say to do. No w/a name for this one. v2: v1 was a stale thing which should have never seen the light of day. (Haihao) Cc: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-13drm/i915/bdw: Don't use forcewake needlesslyVille Syrjälä1-1/+1
Not all registers need forcewake even if they're not shadowed. Add the missing check to gen8_writeX() to avoid needless forcewake usage when writing eg. display registers. v2: Use straight up <0x40000 check instead of NEEDS_FORCE_WAKE() Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-13drm/i915: Clear out old GT FIFO errors in intel_uncore_early_sanitize()Ville Syrjälä1-0/+5
The BIOS or someone else might have done something bad and there might be old GT FIFO erros reported in GTFIFODBG. Clear those out in intel_uncore_early_sanitize() to make sure we don't mistake them for our problems. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-13drm/i915: dont call irq_put when irq test is onMika Kuoppala1-3/+5
If test is running, irq_get was not called so we should gain balance by not doing irq_put "So the rule is: if you access unlocked values, you use ACCESS_ONCE(). You don't say "but it can't matter". Because you simply don't know." -- Linus v2: use local variable so it can't change during test (Chris) v3: update commit msg and use ACCESS_ONCE (Ville) Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-13drm/i915: Rework the FBC interval/stall stuff a bitVille Syrjälä2-22/+15
Don't touch DPFC_RECOMP_CTL on FBC2, use RMW to update the FBC_CONTROL on FBC1 to make it easier for people to experiment with different numbers. Also fix the interval mask for FBC1. v2: Rebased Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 12:55:37 +0300