summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-01-30docs: i2c: fix typoLuca Ceresoli1-1/+1
Fix "issus" -> "issues". Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-30docs: i2c: call it "I2C" consistentlyLuca Ceresoli8-53/+53
Uppercase "I2C" is used almost everywhere in the docs, but the lowercase version "i2c" is used somewhere. Use the uppercase form consistently. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-30docs: i2c: summary: rewrite the "terminology" sectionLuca Ceresoli2-14/+1363
This section, partly dating back to the pre-git era, is somewhat unclear and partly incorrect. Rewrite it almost completely including a reference figure, concise but precise definition of each term and the paths where drivers are found. Particular care has been put in clarifying the relation between adapter and algorithm, which has no correspondence in the I2C spec terminology. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-30docs: i2c: summary: extend introductionLuca Ceresoli1-6/+12
- state the "official" name (I²C, not I2C, according to the spec) at the beginning but keep using the more practical I2C elsewhere - mention some known different names - add link to the specification document Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-30docs: i2c: sort index logicallyLuca Ceresoli1-11/+47
The index page currently lists sections in alphabetical file order without caring about their content. Sort sections based on their content logically, according to the following structure: * Intro to I2C/SMBus and their usage in Linux: summary, i2c-protocol, smbus-protocol, instantiating-devices, busses/index, i2c-topology, muxes/i2c-mux-gpio * Implementing drivers: writing-clients, dev-interface, dma-considerations, fault-codes, functionality * Debugging: gpio-fault-injection, i2c-stub * Slave I2C: slave-interface, slave-eeprom-backend * Advanced: ten-bit-addresses * Obsolete info: upgrading-clients, old-module-parameters Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang3-37/+63
i2c/for-5.6 The main feature is the idle-state rework of the pca954x driver from Biwen Li.
2020-01-29Merge tag 'at24-updates-for-v5.6' of ↵Wolfram Sang7-27/+91
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.6 at24 updates for linux v5.6 - minor maintenance: update the license tag, sort headers - move support for the write-protect pin into nvmem core - add a reference to the new wp-gpios property in nvmem to at25 bindings - add support for regulator and pm_runtime control
2020-01-29i2c: xiic: fix indentation issueColin Ian King1-1/+1
There is a statement that is indented one level too deeply, remove the extraneous tab. Fixes: b4c119dbc300 ("i2c: xiic: Add timeout to the rx fifo wait loop") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-29i2c: parport: fix spelling mistake: "Atmost" -> "At most"Colin Ian King1-1/+1
There is a spelling mistake in a module parameter description. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-23misc: eeprom: at24: support pm_runtime controlBibby Hsieh1-0/+39
Although in the most platforms, the power of eeprom are alway on, some platforms disable the eeprom power in order to meet low power request. This patch add the pm_runtime ops to control power to support all platforms. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> [Bartosz: rebased on top of current at24/for-next] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-01-23dt-binding: eeprom: at24: add vcc-supply propertyBibby Hsieh1-0/+4
In some platforms, they disable the power-supply of eeprom due to power consumption reduction. This patch add vcc-supply property. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-01-23i2c: exynos: Update Kconfig documentationKrzysztof Kozlowski1-4/+4
Update the help text to reflect current support devices: 1. The Exynos high speed I2C driver supports Exynos5 (ARMv7), Exynos5433 and Exynos7 (both ARMv8) SoCs, 2. The S3C I2C driver supports S3C, S5Pv210 and Exynos{3,4,5} SoCs. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-23i2c: Enable compile testing for more driversKrzysztof Kozlowski1-28/+33
Some of the I2C bus drivers can be compile tested to increase build coverage. This requires also: 1. Adding dependencies on COMMON_CLK for BCM2835 and Meson I2C controllers, 2. Adding 'if' conditional to 'default y' so they will not get enabled by default on all other architectures, 3. Limiting few compile test options to supported architectures (which provide the readsX()/writesX() primitives). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> [wsa: revert chunk for ZX2967. it needs more preparation] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: xiic: Fix the clocking across bind unbindShubhrajyoti Datta1-5/+7
The recommendation is that the set_active should be done with pm runtime disabled. Also fix the remove path for clocking. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: xiic: defer the probe if clock is not foundVenkatesh Yadav Abbarapu1-1/+2
It's not always the case that clock is already available when i2c driver get probed at the first time, e.g. the clock is provided by clock wizard which may be probed after i2c driver. So let's defer the probe when devm_clk_get() call fails and give it chance to try later. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: xiic: Add timeout to the rx fifo wait loopShubhrajyoti Datta1-10/+42
Add timeout to the rx fifo empty wait loop. Also check for the return value for xiic_reinit and pass it to xiic_start_xfer. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: highlander: Use proper printk format for size_tKrzysztof Kozlowski1-1/+1
size_t should be printed with its own format to be 64-bit friendly and fix warning when compiling on 64-bit platform (e.g. with COMPILE_TEST): drivers/i2c/busses/i2c-highlander.c: In function ‘highlander_i2c_smbus_xfer’: drivers/i2c/busses/i2c-highlander.c:325:22: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t {aka long unsigned int}’ [-Wformat=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: pnx: Use proper printk format for resource_size_tKrzysztof Kozlowski1-2/+2
resource_size_t should be printed with its own size-independent format to fix warnings when compiling on 64-bit platform (e.g. with COMPILE_TEST): drivers/i2c/busses/i2c-pnx.c: In function ‘i2c_pnx_probe’: drivers/i2c/busses/i2c-pnx.c:737:47: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘resource_size_t {aka long long unsigned int}’ [-Wformat=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: pmcmsp: Use proper printk format for resource_size_tKrzysztof Kozlowski1-3/+3
resource_size_t should be printed with its own size-independent format to fix warnings when compiling on 64-bit platform (e.g. with COMPILE_TEST): drivers/i2c/busses/i2c-pmcmsp.c: In function ‘pmcmsptwi_probe’: drivers/i2c/busses/i2c-pmcmsp.c:276:25: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘resource_size_t {aka long long unsigned int}’ [-Wformat=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15docs: i2c: use the new API in 'writing-clients'Wolfram Sang1-10/+10
i2c_new_device is deprecated, use i2c_new_client_device. Also, align a paragraph while here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15docs: i2c: use the new API in 'instantiating-devices.rst'Wolfram Sang1-4/+4
i2c_new_device is deprecated, use i2c_new_client_device. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: i2c-core-of: convert to use i2c_new_client_device()Wolfram Sang1-4/+3
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: i2c-core-base: convert to use i2c_new_client_device()Wolfram Sang1-7/+6
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: i2c-core-acpi: convert to use i2c_new_client_device()Wolfram Sang1-8/+4
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: xiic: convert to use i2c_new_client_device()Wolfram Sang1-1/+1
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: taos-evm: convert to use i2c_new_client_device()Wolfram Sang1-2/+2
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: powermac: convert to use i2c_new_client_device()Wolfram Sang1-4/+4
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: ocores: convert to use i2c_new_client_device()Wolfram Sang1-1/+1
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: nvidia-gpu: convert to use i2c_new_client_device()Wolfram Sang1-3/+3
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: i801: convert to use i2c_new_client_device()Wolfram Sang1-3/+3
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: cht-wc: convert to use i2c_new_client_device()Wolfram Sang1-3/+3
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: stu300: Use proper printk format for iomem pointerKrzysztof Kozlowski1-1/+1
iomem pointers should be printed with pointer format to hide the actual value and fix warnings when compiling on 64-bit platform (e.g. with COMPILE_TEST): drivers/i2c/busses/i2c-stu300.c: In function ‘stu300_wait_while_busy’: drivers/i2c/busses/i2c-stu300.c:446:76: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: tegra: Check DMA completion status in addition to left timeDmitry Osipenko1-1/+1
It is more robust to check completion status in addition to the left time in a case of DMA transfer because transfer's completion happens in two phases [one is ISR, other is tasklet] and thus it is possible that DMA is completed while I2C completion awaiting times out because of the deferred notification done by the DMA driver. The DMA completion status becomes 100% actual after DMA synchronization. This fixes spurious DMA timeouts when system is under load. Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: tegra: Always terminate DMA transferDmitry Osipenko1-8/+4
It is possible that I2C could error out in the middle of DMA transfer and in this case DMA channel needs to be reset, otherwise a follow up transfer will fail because DMA channel stays blocked. Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: tegra: Use relaxed versions of readl/writelDmitry Osipenko1-10/+11
There is nothing to synchronize in regards to memory accesses for PIO transfers and for DMA transfers the DMA API takes care of the syncing. Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: tegra: Rename I2C_PIO_MODE_MAX_LEN to I2C_PIO_MODE_PREFERRED_LENDmitry Osipenko1-5/+6
DMA is preferred for a larger transfers, while PIO is preferred for a smaller transfers to avoid unnecessary DMA overhead. There is no strict size limitations for the PIO-mode transfers, so let's rename the constant for clarity. Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: tegra: Support atomic transfersDmitry Osipenko1-15/+69
System shutdown may happen with interrupts being disabled and in this case kernel may hang if atomic transfer isn't supported by driver. There were several occurrences where I found my Nexus 7 completely discharged despite of being turned off and then one day I spotted this in the log: reboot: Power down ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:40 i2c_transfer+0x95/0x9c No atomic I2C transfer handler for 'i2c-1' Modules linked in: tegra30_devfreq CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.4.0-next-20191202-00120-gf7ecd80fb803-dirty #3195 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [<c010e4b5>] (unwind_backtrace) from [<c010a0fd>] (show_stack+0x11/0x14) [<c010a0fd>] (show_stack) from [<c09995e5>] (dump_stack+0x85/0x94) [<c09995e5>] (dump_stack) from [<c011f3d1>] (__warn+0xc1/0xc4) [<c011f3d1>] (__warn) from [<c011f691>] (warn_slowpath_fmt+0x61/0x78) [<c011f691>] (warn_slowpath_fmt) from [<c069a8dd>] (i2c_transfer+0x95/0x9c) [<c069a8dd>] (i2c_transfer) from [<c05667f1>] (regmap_i2c_read+0x4d/0x6c) [<c05667f1>] (regmap_i2c_read) from [<c0563601>] (_regmap_raw_read+0x99/0x1cc) [<c0563601>] (_regmap_raw_read) from [<c0563757>] (_regmap_bus_read+0x23/0x38) [<c0563757>] (_regmap_bus_read) from [<c056293d>] (_regmap_read+0x3d/0xfc) [<c056293d>] (_regmap_read) from [<c0562d3b>] (_regmap_update_bits+0x87/0xc4) [<c0562d3b>] (_regmap_update_bits) from [<c0563add>] (regmap_update_bits_base+0x39/0x50) [<c0563add>] (regmap_update_bits_base) from [<c056fd39>] (max77620_pm_power_off+0x29/0x2c) [<c056fd39>] (max77620_pm_power_off) from [<c013bbdd>] (__do_sys_reboot+0xe9/0x170) [<c013bbdd>] (__do_sys_reboot) from [<c0101001>] (ret_fast_syscall+0x1/0x28) Exception stack(0xde907fa8 to 0xde907ff0) 7fa0: 00000000 00000000 fee1dead 28121969 4321fedc 00000000 7fc0: 00000000 00000000 00000000 00000058 00000000 00000000 00000000 00000000 7fe0: 0045adf0 bed9abb8 004444a0 b6c666d0 ---[ end trace bdd18f87595b1a5e ]--- The atomic transferring is implemented by enforcing PIO mode for the transfer and by polling interrupt status until transfer is completed or failed. Now system shuts down properly every time. Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: tegra: Prevent interrupt triggering after transfer timeoutDmitry Osipenko1-34/+36
Potentially it is possible that interrupt may fire after transfer timeout. That may not end up well for the next transfer because interrupt handling may race with hardware resetting. This is very unlikely to happen in practice, but anyway let's prevent the potential problem by enabling interrupt only at the moments when it is actually necessary to get some interrupt event. Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15Merge branch 'i2c/for-current' into i2c/for-5.6Wolfram Sang1008-5144/+10123
2020-01-15i2c: parport: move include file into main sourceWolfram Sang2-114/+105
After removal of the parport-light driver, this include is used by the parport driver exclusively and can be included in the main source. Move module parameter declarations to its variable declaration while here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: parport: simplify Kconfig descriptionWolfram Sang1-8/+2
The driver is not 'new' anymore, so remove details from the driver it surpassed. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: parport-light: remove driverWolfram Sang6-323/+0
The justification of a light version of the parport driver was less overhead for embedded systems. Well, today, even if an embedded system still has a parport, it surely can handle the fully-fledged parport driver. Remove it to reduce the maintenance burden. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: tegra: Properly disable runtime PM on driver's probe errorDmitry Osipenko1-10/+19
One of the recent Tegra I2C commits made a change that resumes runtime PM during driver's probe, but it missed to put the RPM in a case of error. Note that it's not correct to use pm_runtime_status_suspended because it breaks RPM refcounting. Fixes: 8ebf15e9c869 ("i2c: tegra: Move suspend handling to NOIRQ phase") Cc: <stable@vger.kernel.org> # v5.4+ Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: tegra: Fix suspending in active runtime PM stateDmitry Osipenko1-0/+9
I noticed that sometime I2C clock is kept enabled during suspend-resume. This happens because runtime PM defers dynamic suspension and thus it may happen that runtime PM is in active state when system enters into suspend. In particular I2C controller that is used for CPU's DVFS is often kept ON during suspend because CPU's voltage scaling happens quite often. Fixes: 8ebf15e9c869 ("i2c: tegra: Move suspend handling to NOIRQ phase") Cc: <stable@vger.kernel.org> # v5.4+ Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-14dt-bindings: at25: add reference for the wp-gpios propertyKhouloud Touil1-0/+2
As the at25 uses the NVMEM subsystem, and the property is now being handled, adding reference for it in the device tree binding document, which allows to specify the GPIO line to which the write-protect pin is connected. Signed-off-by: Khouloud Touil <ktouil@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-01-14i2c: meson: implement the master_xfer_atomic callbackMartin Blumenstingl1-32/+65
Boards with some of the 32-bit SoCs (mostly Meson8 and Meson8m2) use a Ricoh RN5T618 PMU which acts as system power controller. The driver for the system power controller may need to the I2C bus just before shutting down or rebooting the system. At this stage the interrupts may be disabled already. Implement the master_xfer_atomic callback so the driver for the RN5T618 PMU can communicate properly with the PMU when shutting down or rebooting the board. The CTRL register has a status bit which can be polled to determine when processing has completed. According to the public S805 datasheet the value 0 means "idle" and 1 means "running". Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [wsa: converted some whitespace alignment] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-13Linux 5.5-rc6Linus Torvalds1-1/+1
2020-01-13Merge tag 'riscv/for-v5.5-rc6' of ↵Linus Torvalds4-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Two fixes for RISC-V: - Clear FP registers during boot when FP support is present, rather than when they aren't present - Move the header files associated with the SiFive L2 cache controller to drivers/soc (where the code was recently moved)" * tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fixup obvious bug for fp-regs reset riscv: move sifive_l2_cache.h to include/soc
2020-01-12riscv: Fixup obvious bug for fp-regs resetGuo Ren1-1/+1
CSR_MISA is defined in Privileged Architectures' spec: 3.1.1 Machine ISA Register misa. Every bit:1 indicate a feature, so we should beqz reset_done when there is no F/D bit in csr_misa register. Signed-off-by: Guo Ren <ren_guo@c-sky.com> [paul.walmsley@sifive.com: fix typo in commit message] Fixes: 9e80635619b51 ("riscv: clear the instruction cache and all registers when booting") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-12riscv: move sifive_l2_cache.h to include/socYash Shah3-5/+5
The commit 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") moves the sifive L2 cache driver to driver/soc. It did not move the header file along with the driver. Therefore this patch moves the header file to driver/soc Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: updated to fix the include guard] Fixes: 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 00:05:53 +0300