| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add ABI for the two halves of a para-virtualized
sound driver to communicate with each other.
The ABI allows implementing audio playback and capture as
well as volume control and possibility to mute/unmute
audio sources.
Note: depending on the use-case backend can expose more sound
cards and PCM devices/streams than the underlying HW physically
has by employing SW mixers, configuring virtual sound streams,
channels etc. Thus, allowing fine tunned configurations per
frontend.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com>
Signed-off-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@globallogic.com>
Signed-off-by: Iurii Konovalenko <iurii.konovalenko@globallogic.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Multi-touch fields re-use the page that is used by the other features
which means that you can interleave multi-touch, motion, and key
events.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The patch clarifies the protocol that is used by the PV keyboard
drivers.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This patch adds a Kconfig option and Makefile support for building the
9pfs Xen driver.
CC: groug@kaod.org
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Upon receiving a notification from the backend, schedule the
p9_xen_response work_struct. p9_xen_response checks if any responses are
available, if so, it reads them one by one, calling p9_client_cb to send
them up to the 9p layer (p9_client_cb completes the request). Handle the
ring following the Xen 9pfs specification.
CC: groug@kaod.org
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Implement struct p9_trans_module create and close functions by looking
at the available Xen 9pfs frontend-backend connections. We don't expect
many frontend-backend connections, thus walking a list is OK.
Send requests to the backend by copying each request to one of the
available rings (each frontend-backend connection comes with multiple
rings). Handle the ring and notifications following the 9pfs
specification. If there are not enough free bytes on the ring for the
request, wait on the wait_queue: the backend will send a notification
after consuming more requests.
CC: groug@kaod.org
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Implement functions to handle the xenbus handshake. Upon connection,
allocate the rings according to the protocol specification.
Initialize a work_struct and a wait_queue. The work_struct will be used
to schedule work upon receiving an event channel notification from the
backend. The wait_queue will be used to wait when the ring is full and
we need to send a new request.
CC: groug@kaod.org
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Introduce the Xen 9pfs transport driver: add struct xenbus_driver to
register as a xenbus driver and add struct p9_trans_module to register
as v9fs driver.
All functions are empty stubs for now.
CC: groug@kaod.org
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
It uses the new ring.h macros to declare rings and interfaces.
CC: konrad.wilk@oracle.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: groug@kaod.org
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Sync the ring.h file with upstream Xen, to introduce the new ring macros.
They will be used by the Xen transport for 9pfs.
CC: konrad.wilk@oracle.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: groug@kaod.org
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
xen_call_function_interrupt() isn't used in smp_pv.c. Remove it.
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
After code split between PV and HVM some functions in xen_smp_ops have
xen_pv_ prefix and some only xen_ which makes them look like they're
common for both PV and HVM while they're not. Rename all the rest to
have xen_pv_ prefix.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Now everything is in place and we can move PV-only code under
CONFIG_XEN_PV. CONFIG_XEN_PV_SMP is created to support the change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
xen_create_contiguous_region()/xen_create_contiguous_region() are PV-only,
they both contain xen_feature(XENFEAT_auto_translated_physmap) check and
bail in the very beginning.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Balloon driver uses several PV-only concepts (xen_start_info,
xen_extra_mem,..) and it seems the simpliest solution to make HVM-only
build happy is to decorate these parts with #ifdefs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
__pfn_to_mfn() is only used from PV code (mmu_pv.c, p2m.c) and from
page.h where all functions calling it check for
xen_feature(XENFEAT_auto_translated_physmap) first so we can replace
it with any stub to make build happy.
set_foreign_p2m_mapping()/clear_foreign_p2m_mapping() are used from
grant-table.c but only if !xen_feature(XENFEAT_auto_translated_physmap).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
startup_xen references PV-only code, decorate it with #ifdef CONFIG_XEN_PV
to make PV-free builds possible.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
xen_pmu_init/finish() functions are used in suspend.c and
enlighten.c, add stubs for now.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Slit the code in suspend.c into suspend_pv.c and suspend_hvm.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Basically, mmu.c is renamed to mmu_pv.c and some code moved out to common
mmu.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Move PVHVM related code to mmu_hvm.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Basically, smp.c is renamed to smp_pv.c and some code moved out to common
smp.c. struct xen_common_irq delcaration ended up in smp.h.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Move PVHVM related code to smp_hvm.c. Drop 'static' qualifier from
xen_smp_send_reschedule(), xen_smp_send_call_function_ipi(),
xen_smp_send_call_function_single_ipi(), these functions will be moved to
common smp code when smp_pv.c is split.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Split xen_cpu_die() into xen_pv_cpu_die() and xen_hvm_cpu_die() to support
further splitting of smp.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Split xen_smp_prepare_boot_cpu() into xen_pv_smp_prepare_boot_cpu() and
xen_hvm_smp_prepare_boot_cpu() to support further splitting of smp.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
xen_smp_intr_init() and xen_smp_intr_free() have PV-specific code and as
a praparatory change to splitting smp.c we need to split these fucntions.
Create xen_smp_intr_init_pv()/xen_smp_intr_free_pv().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Basically, enlighten.c is renamed to enlighten_pv.c and some code moved
out to common enlighten.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Move PVHVM related code to enlighten_hvm.c. Three functions:
xen_cpuhp_setup(), xen_reboot(), xen_emergency_restart() are shared, drop
static qualifier from them. These functions will go to common code once
it is split from enlighten.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Create enlighten_pvh.c by splitting off PVH related code from enlighten.c,
put it under CONFIG_XEN_PVH.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
All code to support Xen PV will get under this new option. For the
beginning, check for it in the common code.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
have_vcpu_info_placement applies to both PV and HVM and as we're going
to split the code we need to make it global.
Rename to xen_have_vcpu_info_placement.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
As a preparation to splitting the code we need to untangle it:
x86_hyper_xen -> x86_hyper_xen_hvm and x86_hyper_xen_pv
xen_platform() -> xen_platform_hvm() and xen_platform_pv()
xen_cpu_up_prepare() -> xen_cpu_up_prepare_pv() and xen_cpu_up_prepare_hvm()
xen_cpu_dead() -> xen_cpu_dead_pv() and xen_cpu_dead_pv_hvm()
Add two parameters to xen_cpuhp_setup() to pass proper cpu_up_prepare and
cpu_dead hooks. xen_set_cpu_features() is now PV-only so the redundant
xen_pv_domain() check can be dropped.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"The main x86 MM changes in this cycle were:
- continued native kernel PCID support preparation patches to the TLB
flushing code (Andy Lutomirski)
- various fixes related to 32-bit compat syscall returning address
over 4Gb in applications, launched from 64-bit binaries - motivated
by C/R frameworks such as Virtuozzo. (Dmitry Safonov)
- continued Intel 5-level paging enablement: in particular the
conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov)
- x86/mpx ABI corner case fixes/enhancements (Joerg Roedel)
- ... plus misc updates, fixes and cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash
x86/mm: Fix flush_tlb_page() on Xen
x86/mm: Make flush_tlb_mm_range() more predictable
x86/mm: Remove flush_tlb() and flush_tlb_current_task()
x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
x86/mm/64: Fix crash in remove_pagetable()
Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"
x86/boot/e820: Remove a redundant self assignment
x86/mm: Fix dump pagetables for 4 levels of page tables
x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow
x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()"
x86/espfix: Add support for 5-level paging
x86/kasan: Extend KASAN to support 5-level paging
x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y
x86/paravirt: Add 5-level support to the paravirt code
x86/mm: Define virtual memory map for 5-level paging
x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert
x86/boot: Detect 5-level paging support
x86/mm/numa: Remove numa_nodemask_from_meminfo()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vdso updates from Ingo Molnar:
"Add support for vDSO acceleration of the "Hyper-V TSC page", to speed
up clock reading on Hyper-V guests"
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Add VCLOCK_HVCLOCK vDSO clock read method
x86/hyperv: Move TSC reading method to asm/mshyperv.h
x86/hyperv: Implement hv_get_tsc_page()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"Most of the commits are continued SGI UV4 hardware-enablement changes,
plus there's also new Bluetooth support for the Intel Edison platform"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/intel-mid: Enable Bluetooth support on Intel Edison
x86/platform/uv/BAU: Implement uv4_wait_completion with read_status
x86/platform/uv/BAU: Add wait_completion to bau_operations
x86/platform/uv/BAU: Add status mmr location fields to bau_control
x86/platform/uv/BAU: Cleanup bau_operations declaration and instances
x86/platform/uv/BAU: Add payload descriptor qualifier
x86/platform/uv/BAU: Add uv_bau_version enumerated constants
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 irq update from Ingo Molnar:
"A single commit that micro-optimizes an IRQ vectors code path in the
CPU offlining code"
* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Optimize free vector check in the CPU offline path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 debug updates from Ingo Molnar:
"The biggest update is the addition of USB3 debug port based
early-console.
Greg was fine with the USB changes and with the routing of these
patches:
https://www.spinics.net/lists/linux-usb/msg155093.html"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
usb/doc: Add document for USB3 debug port usage
usb/serial: Add DBC debug device support to usb_debug
x86/earlyprintk: Add support for earlyprintk via USB3 debug port
usb/early: Add driver for xhci debug capability
x86/timers: Add simple udelay calibration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"A handful of small cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Remove a redundant #ifdef directive
x86/smp: Remove the redundant #ifdef CONFIG_SMP directive
x86/smp: Reduce code duplication
x86/pci-calgary: Use setup_timer() instead of open coding it.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build update from Ingo Molnar:
"A single CLang support related fix"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kbuild: Use cc-option to enable -falign-{jumps/loops}
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- unwinder fixes and enhancements
- improve ftrace interaction with the unwinder
- optimize the code footprint of WARN() and related debugging
constructs
- ... plus misc updates, cleanups and fixes"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/unwind: Dump all stacks in unwind_dump()
x86/unwind: Silence more entry-code related warnings
x86/ftrace: Fix ebp in ftrace_regs_caller that screws up unwinder
x86/unwind: Remove unused 'sp' parameter in unwind_dump()
x86/unwind: Prepend hex mask value with '0x' in unwind_dump()
x86/unwind: Properly zero-pad 32-bit values in unwind_dump()
x86/unwind: Ensure stack pointer is aligned
debug: Avoid setting BUGFLAG_WARNING twice
x86/unwind: Silence entry-related warnings
x86/unwind: Read stack return address in update_stack_state()
x86/unwind: Move common code into update_stack_state()
debug: Fix __bug_table[] in arch linker scripts
debug: Add _ONCE() logic to report_bug()
x86/debug: Define BUG() again for !CONFIG_BUG
x86/debug: Implement __WARN() using UD0
x86/ftrace: Use Makefile logic instead of #ifdef for compiling ftrace_*.o
x86/ftrace: Add -mfentry support to x86_32 with DYNAMIC_FTRACE set
x86/ftrace: Clean up ftrace_regs_caller
x86/ftrace: Add stack frame pointer to ftrace_caller
x86/ftrace: Move the ftrace specific code out of entry_32.S
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Ingo Molnar:
"Two small cleanups"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix a comment in init_apic_mappings()
x86/apic: Remove the SET_APIC_ID(x) macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Ingo Molnar:
"The biggest changes are an extension of the Intel RDT code to extend
it with Intel Memory Bandwidth Allocation CPU support: MBA allows
bandwidth allocation between cores, while CBM (already upstream)
allows CPU cache partitioning.
There's also misc smaller fixes and updates"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/intel_rdt: Return error for incorrect resource names in schemata
x86/intel_rdt: Trim whitespace while parsing schemata input
x86/intel_rdt: Fix padding when resource is enabled via mount
x86/intel_rdt: Get rid of anon union
x86/cpu: Keep model defines sorted by model number
x86/intel_rdt/mba: Add schemata file support for MBA
x86/intel_rdt: Make schemata file parsers resource specific
x86/intel_rdt/mba: Add info directory files for Memory Bandwidth Allocation
x86/intel_rdt: Make information files resource specific
x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)
x86/intel_rdt/mba: Memory bandwith allocation feature detect
x86/intel_rdt: Add resource specific msr update function
x86/intel_rdt: Move CBM specific data into a struct
x86/intel_rdt: Cleanup namespace to support multiple resource types
Documentation, x86: Intel Memory bandwidth allocation
x86/intel_rdt: Organize code properly
x86/intel_rdt: Init padding only if a device exists
x86/intel_rdt: Add cpus_list rdtgroup file
x86/intel_rdt: Cleanup kernel-doc
x86/intel_rdt: Update schemata read to show data in tabular format
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The biggest changes in this cycle were:
- reworking of the e820 code: separate in-kernel and boot-ABI data
structures and apply a whole range of cleanups to the kernel side.
No change in functionality.
- enable KASLR by default: it's used by all major distros and it's
out of the experimental stage as well.
- ... misc fixes and cleanups"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails
x86/reboot: Turn off KVM when halting a CPU
x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startup
x86: Enable KASLR by default
boot/param: Move next_arg() function to lib/cmdline.c for later reuse
x86/boot: Fix Sparse warning by including required header file
x86/boot/64: Rename start_cpu()
x86/xen: Update e820 table handling to the new core x86 E820 code
x86/boot: Fix pr_debug() API braindamage
xen, x86/headers: Add <linux/device.h> dependency to <asm/xen/page.h>
x86/boot/e820: Simplify e820__update_table()
x86/boot/e820: Separate the E820 ABI structures from the in-kernel structures
x86/boot/e820: Fix and clean up e820_type switch() statements
x86/boot/e820: Rename the remaining E820 APIs to the e820__*() prefix
x86/boot/e820: Remove unnecessary #include's
x86/boot/e820: Rename e820_mark_nosave_regions() to e820__register_nosave_regions()
x86/boot/e820: Rename e820_reserve_resources*() to e820__reserve_resources*()
x86/boot/e820: Use bool in query APIs
x86/boot/e820: Document e820__reserve_setup_data()
x86/boot/e820: Clean up __e820__update_table() et al
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
"The main changes in this cycle were:
- add the 'Corrected Errors Collector' kernel feature which collect
and monitor correctable errors statistics and will preemptively
(soft-)offline physical pages that have a suspiciously high error
count.
- handle MCE errors during kexec() more gracefully
- factor out and deprecate the /dev/mcelog driver
- ... plus misc fixes and cleanpus"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Check MCi_STATUS[MISCV] for usable addr on Intel only
ACPI/APEI: Use setup_deferrable_timer()
x86/mce: Update notifier priority check
x86/mce: Enable PPIN for Knights Landing/Mill
x86/mce: Do not register notifiers with invalid prio
x86/mce: Factor out and deprecate the /dev/mcelog driver
RAS: Add a Corrected Errors Collector
x86/mce: Rename mce_log to mce_log_buffer
x86/mce: Rename mce_log()'s argument
x86/mce: Init some CPU features early
x86/mce: Handle broadcasted MCE gracefully with kexec
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- Kprobes and uprobes changes:
- Make their trampolines read-only while they are used
- Make UPROBES_EVENTS default-y which is the distro practice
- Apply misc fixes and robustization to probe point insertion.
- add support for AMD IOMMU events
- extend hw events on Intel Goldmont CPUs
- ... plus misc fixes and updates.
Tooling side changes:
- support s390 jump instructions in perf annotate (Christian
Borntraeger)
- vendor hardware events updates (Andi Kleen)
- add argument support for SDT events in powerpc (Ravi Bangoria)
- beautify the statx syscall arguments in 'perf trace' (Arnaldo
Carvalho de Melo)
- handle inline functions in callchains (Jin Yao)
- enable sorting by srcline as key (Milian Wolff)
- add 'brstackinsn' field in 'perf script' to reuse the x86
instruction decoder used in the Intel PT code to study hot paths to
samples (Andi Kleen)
- add PERF_RECORD_NAMESPACES so that the kernel can record
information required to associate samples to namespaces, helping in
container problem characterization. (Hari Bathini)
- allow sorting by symbol_size in 'perf report' and 'perf top'
(Charles Baylis)
- in perf stat, make system wide (-a) the default option if no target
was specified and one of following conditions is met:
- no workload specified (current behaviour)
- a workload is specified but all requested events are system wide
ones, like uncore ones. (Jiri Olsa)
- ... plus lots of other updates, enhancements, cleanups and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (235 commits)
perf tools: Fix the code to strip command name
tools arch x86: Sync cpufeatures.h
tools arch: Sync arch/x86/lib/memcpy_64.S with the kernel
tools: Update asm-generic/mman-common.h copy from the kernel
perf tools: Use just forward declarations for struct thread where possible
perf tools: Add the right header to obtain PERF_ALIGN()
perf tools: Remove poll.h and wait.h from util.h
perf tools: Remove string.h, unistd.h and sys/stat.h from util.h
perf tools: Remove stale prototypes from builtin.h
perf tools: Remove string.h from util.h
perf tools: Remove sys/ioctl.h from util.h
perf tools: Remove a few more needless includes from util.h
perf tools: Include sys/param.h where needed
perf callchain: Move callchain specific routines from util.[ch]
perf tools: Add compress.h for the *_decompress_to_file() headers
perf mem: Fix display of data source snoop indication
perf debug: Move dump_stack() and sighandler_dump_stack() to debug.h
perf kvm: Make function only used by 'perf kvm' static
perf tools: Move timestamp routines from util.h to time-utils.h
perf tools: Move units conversion/formatting routines to separate object
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pul x86/process updates from Ingo Molnar:
"The main change in this cycle was to add the ARCH_[GET|SET]_CPUID
prctl() ABI extension to control the availability of the CPUID
instruction, analogously to the existing PR_GET|SET_TSC ABI that
controls RDTSC.
Motivation: the 'rr' user-space record-and-replay execution debugger
would like to trap and emulate the CPUID instruction - which
instruction is normally unprivileged.
Trapping CPUID is possible on IvyBridge and later Intel CPUs - expose
this hardware capability"
* 'x86-process-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/syscalls/32: Ignore arch_prctl for other architectures
um/arch_prctl: Fix fallout from x86 arch_prctl() rework
x86/arch_prctl: Add ARCH_[GET|SET]_CPUID
x86/cpufeature: Detect CPUID faulting support
x86/syscalls/32: Wire up arch_prctl on x86-32
x86/arch_prctl: Add do_arch_prctl_common()
x86/arch_prctl/64: Rename do_arch_prctl() to do_arch_prctl_64()
x86/arch_prctl/64: Use SYSCALL_DEFINE2 to define sys_arch_prctl()
x86/arch_prctl: Rename 'code' argument to 'option'
x86/msr: Rename MISC_FEATURE_ENABLES to MISC_FEATURES_ENABLES
x86/process: Optimize TIF_NOTSC switch
x86/process: Correct and optimize TIF_BLOCKSTEP switch
x86/process: Optimize TIF checks in __switch_to_xtra()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- a big round of FUTEX_UNLOCK_PI improvements, fixes, cleanups and
general restructuring
- lockdep updates such as new checks for lock_downgrade()
- introduce the new atomic_try_cmpxchg() locking API and use it to
optimize refcount code generation
- ... plus misc fixes, updates and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
MAINTAINERS: Add FUTEX SUBSYSTEM
futex: Clarify mark_wake_futex memory barrier usage
futex: Fix small (and harmless looking) inconsistencies
futex: Avoid freeing an active timer
rtmutex: Plug preempt count leak in rt_mutex_futex_unlock()
rtmutex: Fix more prio comparisons
rtmutex: Fix PI chain order integrity
sched,tracing: Update trace_sched_pi_setprio()
sched/rtmutex: Refactor rt_mutex_setprio()
rtmutex: Clean up
sched/deadline/rtmutex: Dont miss the dl_runtime/dl_period update
sched/rtmutex/deadline: Fix a PI crash for deadline tasks
rtmutex: Deboost before waking up the top waiter
locking/ww-mutex: Limit stress test to 2 seconds
locking/atomic: Fix atomic_try_cmpxchg() semantics
lockdep: Fix per-cpu static objects
futex: Drop hb->lock before enqueueing on the rtmutex
futex: Futex_unlock_pi() determinism
futex: Rework futex_lock_pi() to use rt_mutex_*_proxy_lock()
futex,rt_mutex: Restructure rt_mutex_finish_proxy_lock()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- another round of rq-clock handling debugging, robustization and
fixes
- PELT accounting improvements
- CPU hotplug related ->cpus_allowed affinity handling fixes all
around the tree
- ... plus misc fixes, cleanups and updates"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
sched/x86: Update reschedule warning text
crypto: N2 - Replace racy task affinity logic
cpufreq/sparc-us2e: Replace racy task affinity logic
cpufreq/sparc-us3: Replace racy task affinity logic
cpufreq/sh: Replace racy task affinity logic
cpufreq/ia64: Replace racy task affinity logic
ACPI/processor: Replace racy task affinity logic
ACPI/processor: Fix error handling in __acpi_processor_start()
sparc/sysfs: Replace racy task affinity logic
powerpc/smp: Replace open coded task affinity logic
ia64/sn/hwperf: Replace racy task affinity logic
ia64/salinfo: Replace racy task affinity logic
workqueue: Provide work_on_cpu_safe()
ia64/topology: Remove cpus_allowed manipulation
sched/fair: Move the PELT constants into a generated header
sched/fair: Increase PELT accuracy for small tasks
sched/fair: Fix comments
sched/Documentation: Add 'sched-pelt' tool
sched/fair: Fix corner case in __accumulate_sum()
sched/core: Remove 'task' parameter and rename tsk_restore_flags() to current_restore_flags()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- move BGRT handling to drivers/acpi so it can be shared between x86
and ARM
- bring the EFI stub's initrd and FDT allocation logic in line with
the latest changes to the arm64 boot protocol
- improvements and fixes to the EFI stub's command line parsing
routines
- randomize the virtual mapping of the UEFI runtime services on
ARM/arm64
- ... and other misc enhancements, cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub/arm: Don't use TASK_SIZE when randomizing the RT space
ef/libstub/arm/arm64: Randomize the base of the UEFI rt services region
efi/libstub/arm/arm64: Disable debug prints on 'quiet' cmdline arg
efi/libstub: Unify command line param parsing
efi/libstub: Fix harmless command line parsing bug
efi/arm32-stub: Allow boot-time allocations in the vmlinux region
x86/efi: Clean up a minor mistake in comment
efi/pstore: Return error code (if any) from efi_pstore_write()
efi/bgrt: Enable ACPI BGRT handling on arm64
x86/efi/bgrt: Move efi-bgrt handling out of arch/x86
efi/arm-stub: Round up FDT allocation to mapping size
efi/arm-stub: Correct FDT and initrd allocation rules for arm64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timer departement delivers:
- more year 2038 rework
- a massive rework of the arm achitected timer
- preparatory patches to allow NTP correction of clock event devices
to avoid early expiry
- the usual pile of fixes and enhancements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits)
timer/sysclt: Restrict timer migration sysctl values to 0 and 1
arm64/arch_timer: Mark errata handlers as __maybe_unused
Clocksource/mips-gic: Remove redundant non devicetree init
MIPS/Malta: Probe gic-timer via devicetree
clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK
acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
clocksource: arm_arch_timer: add GTDT support for memory-mapped timer
acpi/arm64: Add memory-mapped timer support in GTDT driver
clocksource: arm_arch_timer: simplify ACPI support code.
acpi/arm64: Add GTDT table parse driver
clocksource: arm_arch_timer: split MMIO timer probing.
clocksource: arm_arch_timer: add structs to describe MMIO timer
clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call
clocksource: arm_arch_timer: refactor arch_timer_needs_probing
clocksource: arm_arch_timer: split dt-only rate handling
x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks
unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks
um/time: Set ->min_delta_ticks and ->max_delta_ticks
tile/time: Set ->min_delta_ticks and ->max_delta_ticks
score/time: Set ->min_delta_ticks and ->max_delta_ticks
...
|
